SQL Server Memory Configuration Share Nicely With COM
Jun 5, 2006
Hello,
So we have a clustered environment on Windows 2003.
We have 12GB ram, and are running with /3GB and /PAE.
We do not currently have AWE enabled.
SQL is currently using 2.799GB
This leaves only 200MB or so free for my COM+ component, and if/when it raises to that level, application users get 'Out of Memory' error.
How can we get these two products to share memory better, and more importantly utilize more of the free memory on the system.
Should we have AWE enabled? Are there any negatives to this? If AWE is enabled and SQL Uses say 6GB, Will the COM+ application have 0 available?
View 3 Replies
ADVERTISEMENT
Apr 16, 2003
I am looking for recommandations regarding the memory distribution for SQL 2000 server. In the memory tab of the server properties you can define use a fixed memory size or dynamically configure SQL server or even reserve physical memory for SQL server.
Are there any hints available or must it be handled according trial and error?
Thanks for any info
mipo
View 2 Replies
View Related
Dec 13, 2001
Can someone tell me if this sounds OK?:
NT4 SP5 running SQL6.5
Physical Memory - 512mb
Virtual Memory - 1024mb
Allocated to SQL - 256mb
The largest database is 7gb and tempdb (in ram) is 150mb
Do as a rough guide these figures seem OK?
View 4 Replies
View Related
Apr 19, 2000
hi
I want to ask the method to calculate the memory in the configuration in SQL6.5.
If I have 256MB memory installed in the server, how many memory needed in the configuration of SQL6.5.
View 1 Replies
View Related
Oct 27, 1998
hi, here is the situation, my system has the following specks
hard drive = 45GB
memory = 1152 mb
Opsystem = win NT 4.0
application on the NT is ftp server and SQL server 6.5
I am having a tough time retrieving a simple query from a 11 million records.some of the feed back from the newsgroup is that I do not have enought memory. Is there a formula to use to figure out how much memory should allocate to the sql server? what if I allocated too much memory, does that affect the sql performance in a negative way?
Please help......
I can be reach at a.alhussein@mci.com
thanks alot
regards
Ali
View 4 Replies
View Related
May 19, 2015
How do I design reports so they look good when viewed online?
Is there anyway for it to render nicely on a particular resolution or screen? Never done any web dev, so not sure if I am missing something.
At the moment I am just designing the report so it looks right on my box.
However by trying to maximise the space when viewed online, it means exporting to pdf ends up being a disaster.
View 3 Replies
View Related
Sep 18, 2014
We are just finishing our migration to SQL 2012. In our old environment, the instance which held our SharePoint databases also served other applications. We did not experience any performance related issues in the past due to this.
SharePoint basically requires MAXDOP to be 1, which is correct on the old server. Since this configuration may not be ideal for other applications that may be put within our environment, we our entertaining the idea of isolating SharePoint into its own instance, probably on the same box.
My manager wants me to come up with performance trace data to better prove that we need to go this route since we apparently have had issues in the past by blindly following Microsoft's best practices.
1.MAXDOP configuration - I understand this may be a 2 pronged approach that would require looking at various execution plans and CPU related counters in Perfmon. SharePoint likely requires a maxdop of 1 due to the nature of the application (lots of concurrent processes). What is the best way to show this need graphically?
2. Memory configuration for multiple instances - Does the Total Server Memory reveal all the memory that a given SQL instance is utilizing? Should I use this counter to identify appropriate min/max memory configurations for multiple instances on a single cluster?
The problem with the perfmon approach is that it's scope is limited to just the server. Since our SharePoint environment is currently being shared with other applications, I understand that I may have to utilize DMV statistics to narrow down my analysis.
View 3 Replies
View Related
Sep 22, 2007
I am getting following error when trying to install SQL express 2005 on XPSP2.
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine SIGMA-805539A79 Error:2147944122 (0x800706ba).
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=70342
I tied re-installing WMI using http://blogs.msdn.com/jpapiez/archive/2004/12/09/279041.aspx link but could not get it working.
Do i need IIS installed? Its not installed on this box...
please suggest something... i am stuck...
Thanks,
View 3 Replies
View Related
May 2, 2007
I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
DEV
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Reporting Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
QA
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Common components
Integration Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Notification Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Workstation Components
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
===================================
View 1 Replies
View Related
Aug 2, 2006
Hi
I did a load testing and found the following observations:
1. The Memory:Pages/sec was crossing the limit beyond 20.
2. The Target Server Memory was always greater than Total Server Memory
Seeing the above data it seems to be memory pressure. But I found that AvailableMemory was always above 200 MB. Also Buffer Cache HitRatio was close to 99.99. What could be the reason for the above behavior?
View 1 Replies
View Related
Aug 22, 2007
sql server 2000 is running on windows server 2003 ... 4gb of memory on server .... 2003 was allocated 2.3gb nd sql server was allocated (and using all of it) 1.6gb for total of approx 4gb based on idera monitor software ... all memory allocated betweeen the OS and sql server .... then 4 more gb of memory added for total now of 8g ... now idera monitor shows 1.7gb for OS and 1.0 gb for sql server ..... 'system' info shows 8gb memory with PAE ... so I assume that the full 8gb can now be addressed .... why are less resources being used now with more total memory .... especially sql server ..... i thought about specifying a minimum memmry for sql server but i amnot convinced that would even work since it seems that this 1gb limit is artificial .... it it used 1.6 gb before why would it not use at least that much now ??
thank you
View 4 Replies
View Related
Oct 9, 2007
I have integrated Share Point server 2007 with Reports Server to publish the reports on share point site. I did all steps involved for integration
I have share point server, reports server and database server on three different machines configured and when I am trying to publish the reports from my local Dev box, setting the below project properties,
target datasource folder: http://vstsvr:168/sites/wsL/ReportsLibrary/
target report folder: http://vstsvr:168/sites/wsL/ReportsLibrary/
target Server url: http://vstsvr:168/sites/wsL/
I am getting the following error:
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://vstsvr:168/sites/wsL/.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<HTML dir="ltr">
<HEAD><meta name="GENERATOR" content="Microsoft SharePoint" /><meta name="progid" content="SharePoint.WebPartPage.Document" /><meta HTTP-EQUIV="Content-Type" content="text/html; charset=utf-8" /><meta HTTP-EQUIV="Expires" content="0" /><meta name="ROBOTS" content="NOHTMLINDEX" /><title>
Error
</title><link rel="stylesheet" type="text/css" href="/_layouts/1033/styles/core.css?rev=5msmprmeONfN6lJ3wtbAlA%3D%3D"/>
<script type="text/javascript" language="javascript" src="/_layouts/1033/init.js?rev=VhAxGc3rkK79RM90tibDzw%3D%3D"></script>
<script type="text/javascript" language="javascript" src="/_layouts/1033/core.js?rev=F8pbQQxa4zefcW%2BW9E5g8w%3D%3D"></script>
<meta name="Robots" content="NOINDEX " />
<meta name="SharePointError" content=""/>
</HEAD>
<BODY scroll="yes" onload="javascript:if (typeof(_spBodyOnLoadWrapper) != 'undefined') _spBodyOnLoadWrapper();">
<form name="aspnetForm" method="post" action="../../_layouts/error.aspx" id="aspnetForm" onsubmit="return _spFormOnSubmitWrapper();">
<input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="/wEPDwUKLTU2NjkxODU3M2RkRs1mjkyJL3hiHYWlWaZqxb1RHhI=" />
<TABLE class="ms-main" CELLPADDING=0 CELLSPACING=0 BORDER=0 WIDTH="100%" HEIGHT="100%">
<tr><td>
<table CELLPADDING=0 CELLSPACING=0 BORDER=0 WIDTH="100%">
<tr>
<td colspan=4 class="ms-globalbreadcrumb" align="right">
<a href="javascript:TopHelpButtonClick('NavBarHelpHome')" id="ctl00_PlaceHolderGlobalNavigation_TopHelpLink" AccessKey="6" title="Help (new window)"><img src="/_layouts/images/helpicon.gif" align="absmiddle" border="0" alt="Help (new window)" /></a>
</td>
</tr>
</table>
</td></tr>
<tr>
<td class="ms-globalTitleArea">
<table width=100% cellpadding=0 cellspacing=0 border=0>
<tr>
<td id="GlobalTitleAreaImage" class="ms-titleimagearea"><img id="onetidHeadbnnr0" src="/_layouts/images/titlegraphic.gif" alt="" /></td>
<td class="ms-sitetitle" width=100%>
</td>
<td style="padding-top:8px;" valign=top>
</td>
</tr>
</table>
</td>
</tr>
<TR>
<TD id="onetIdTopNavBarContainer" WIDTH=100% class="ms-bannerContainer">
</TD>
</TR>
<TR height="100%"><TD><TABLE width="100%" height="100%" cellspacing="0" cellpadding="0">
<tr>
<td class="ms-titlearealeft" id="TitleAreaImageCell" valign="middle" nowrap><div style="height:100%" class="ms-titleareaframe"></div></td>
<td class="ms-titleareaframe" id="TitleAreaFrameClass">
<table cellpadding=0 height=100% width=100% cellspacing=0>
<tr><td class="ms-areaseparatorleft"><IMG SRC="/_layouts/images/blank.gif" width=1 height=1 alt=""></td></tr>
</table>
</td>
<td valign=top id="onetidPageTitleAreaFrame" class='ms-areaseparator' nowrap width="100%">
<table id="onetidPageTitleAreaTable" cellpadding=0 cellspacing=0 width=100% border="0">
<tr>
<td valign="top" class="ms-titlearea">
<a href="http://vstsvr:168/sites/wsL" id="ctl00_PlaceHolderTitleBreadcrumb_idSimpleGoBackToHome">Go back to site</a>
</td>
</tr>
<tr>
<td height=100% valign=top ID=onetidPageTitle class="ms-pagetitle">
<h2 class="ms-pagetitle">
Error
</h2>
</td>
</tr>
</table>
</td>
<td class="ms-titlearearight">
<div class='ms-areaseparatorright'><IMG SRC="/_layouts/images/blank.gif" width=8 height=100% alt=""></div>
</td>
</tr>
<TR>
<TD class="ms-leftareacell" valign=top height=100% id="LeftNavigationAreaCell">
<table class=ms-nav width=100% height=100% cellpadding=0 cellspacing=0>
<tr>
<td>
<TABLE height="100%" class=ms-navframe CELLPADDING=0 CELLSPACING=0 border="0">
<tr valign="top">
<td width="4px"><IMG SRC="/_layouts/images/blank.gif" width=4 height=1 alt=""></td>
<td valign="top" width="100%">
</td>
</tr>
<tr><td colspan=2><IMG SRC="/_layouts/images/blank.gif" width=138 height=1 alt=""></td></tr>
</TABLE>
</td>
<td></td>
</tr>
</table>
</TD>
<td>
<div class='ms-areaseparatorleft'><IMG SRC="/_layouts/images/blank.gif" width=8 height=100% alt=""></div>
</td>
<td class='ms-formareaframe' valign="top">
<TABLE width="100%" border="0" cellspacing="0" cellpadding="0" class="ms-propertysheet">
<TR valign="top" >
<TD class="ms-descriptiontext" width="100%">
</TD>
<TD ID=onetidYPadding width="10px"><IMG SRC="/_layouts/images/blank.gif" width=10 height=1 alt=""></TD>
</TR>
<TR >
<TD ID=onetidMainBodyPadding height="8px"><IMG SRC="/_layouts/images/blank.gif" width=1 height=8 alt=""></TD>
</TR>
<tr>
<td valign="top" height="100%">
<A name="mainContent"></A>
<table width=100% border=0 class="ms-titleareaframe" cellpadding=0>
<TR>
<TD valign=top width="100%" style="padding-top: 10px" class="ms-descriptiontext">
<span id="ctl00_PlaceHolderMain_LabelMessage">The file you are attempting to save or retrieve has been blocked from this Web site by the server administrators.</span>
<P><span class="ms-descriptiontext">
<span id="ctl00_PlaceHolderMain_helptopic_troubleshooting"><A Title="Troubleshoot issues with Windows SharePoint Services. - Opens in new window" HREF="javascript:HelpWindowKey('troubleshooting')">Troubleshoot issues with Windows SharePoint Services.</A></span>
</span>
</TD>
</TR>
</table>
<script type="text/javascript" language="JavaScript">
var gearPage = document.getElementById('GearPage');
if(null != gearPage)
{
gearPage.parentNode.removeChild(gearPage);
document.title = "Error";
}
</script>
</td>
</tr>
</table>
</td>
<td class="ms-rightareacell">
<div class='ms-areaseparatorright'><IMG SRC="/_layouts/images/blank.gif" width=8 height=100% alt=""></div>
</td>
</TR>
<tr>
<td class="ms-pagebottommarginleft"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td>
<td class="ms-pagebottommargin"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td>
<td class="ms-bodyareapagemargin"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td>
<td class="ms-pagebottommarginright"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td>
</tr>
</TABLE></TD></TR>
</TABLE>
<input type="text" name="__spDummyText1" style="display:none;" size=1/>
<input type="text" name="__spDummyText2" style="display:none;" size=1/>
</form>
</BODY>
</HTML>
--. (Microsoft.ReportingServices.Designer)
------------------------------
BUTTONS:
OK
------------------------------
THanks in Advance for any help.
Devanand
View 5 Replies
View Related
Mar 27, 2007
I have a package that is basically a container for using the Execute Package task to call many "child" packages. Each child package basically uses a data flow to move data from one database to another database on the same SQL Server. In the case of the child packages, I've used a combination of OLEDB and ADO.Net connections on the destinations. I ensured that all tasks and packages are set to TransactionOption.Supported and that the "parent" package has Required set at the package level. Anyway, the problem I'm finding is that one of the OLEDB connections is being blocked. When I look in SQL Server Activity Monitor I see that there are numerous ADO.Net connections that are on multiple processes (all belonging to these packages) even though when I check the Details, I can see that it has completed the final statement of the package the process belongs to. Thinking this may have been a multithreading issue, I changed MaximumConcurrentExecutables to 1 in all of the packages. Basically, even though all of the packages appear to have their own processes, when I look at the locks for the objects I'm working with, they all show up on the lowest process ID. My assumption here is that since the processID is associated with the first package, it is the "owner" of the transaction and even though the packages have their own processIDs, they show up on the first process because they're in the transaction. If I change the connection from OLEDB to ADO.Net, it resolves the issue and the blocking does not occur. So my question is, if I have an OLEDB connection manager and ADO.Net connection manager, can they share in the same transaction or are they in their own transactions?
View 1 Replies
View Related
Jan 5, 2015
I have SQL Server 2014 (Enterprise) on Server A. The service runs under DomainAAdmin.
The Client machine is B, User credentials DomainBUser.
DomainBUser has a share on B that contains a BCP data file. DomainAAdmin has full access to this file.
If I log onto A (the server machine) with either DomainAAdmin or DomainBUser credentials, and run SQL Server Management Studio with Windows Authentication I can run BCP sucessfully using the following:
BULK INSERT [MyTable] from 'Bsharedatafle.tsv' WITH ( KEEPNULLS , KEEPIDENTITY ) However, if I log onto B, (the client machine and the machine hosting the share) and try to run the same bcp command, I get "Access is Denied".
View 5 Replies
View Related
Jan 15, 2007
Hi there SQLTEAM
We have just installed MSSQL 2000 / Project Server / Share-Point.
We've managed to publish a project plan to Project Server.
This project plan is now visible in Project Web Access.
Can someone point me in the right direction, I'm looking for all the data that is stored in SQL for example Projects / Tasks / resourses.
Is there a DATABASE DAIGRAM for project server?
View 1 Replies
View Related
Jun 3, 2014
I am trying to deploy the report into share point server through Visual Studio by using the [URL]..... But I am getting errors like [URL] .... could not be found.
I configured the the URL credentials like :
Target Datasource Folder: DEV/MyReports
Target Dataset Folder: DEV/MyReports
Target Report Folder: DEV/MyReports
Target Server URL: http://bigweb03
How can I deploy the reports in Sharepoint server to view the reports in online.
View 0 Replies
View Related
Apr 23, 2015
SET NOCOUNT ON
Declare @daysOld int,@deletedate nvarchar(19) ,@strDir varchar(250)
declare @cmd11 nvarchar(2000)
declare @mainBackupDir varchar(2000),
@result1 nvarchar(max);
[Code] ....
View 1 Replies
View Related
Jun 1, 2015
I'm, using my script to many location to create folder to save output files and if the folder is removed/not present it can create it without any noise. But the problem is, while I use the same sort of script to check if a folder is present in the sharedpath it will not create it to copy all bkp files from local to remote path works good, but if you delete the folder or rename the exisitng folder and if the below script tries to create the folder it created as "fILE", very interesting. Per IT team they have given SQL Server account the full rights to create/delete/alter folder/files.
Do I need to use seperate script or way to create / alter folders in the sharepath?
SET NOCOUNT ON
Declare @len INT, @i INT, @Left varchar(max), @right varchar(max), @SERVERNAME sysname,@finalServer sysname
declare @rc int, @dir nvarchar(4000)
DECLARE @cmd1 sysname, @cmd2 sysname, @cmd sysname;
Declare @extPAth varchar(max)
[Code] ....
View 5 Replies
View Related
Mar 27, 2007
I am setting up a two active instances of MS SQL Server on a clustered box. In the past I have set up using the nomenclature SQLCLUSTERNAMEINSTANCE-NAME such as SQLCLUS1INST1 and SQLCLUS2INST2.
But, this time the client will like it installed such as SQLCLUS1INST1 and SQLCLUS1INST2. I did not think this is possible --- That is I assumed that cluster resource names have to be unique. But, nevertheless I have tried to do so for the last few days, but no luck.
Can someone please let me know if it is indeed possible to have two separate instances in a single cluster.
BTW, I know this is quite possible with non-clustered instances --- where the SQLSERV1INST1 refers to an actual server name, and not a resource name.
View 7 Replies
View Related
May 21, 2008
Hello All,
I need some advise/help how to deploy a small sql server compact 3.5 database on networkshare where about 8 people have access to it(install de client ) and can modify the database with aprox 3000 records.
I'm using visual basic 2008 and created a compact database and filled it with one table of an export of an access database done with data port console.
And created a new windows forms application and saved the project.
Publish is not the problem but how too set it up......
There is not much info to find on how to get a sql server 3.5 database running on a network share.
Who can help ???
Thanks
View 2 Replies
View Related
Jan 13, 2014
I want to use service SIDs for my SQL Service accounts but also want to have the data files on a NetApp filer CIFS share. The 2014 installer prevents installation if CIFS and Service SIDs are used. I tried to install with domain account on CIFS, and then to swap back to Service SIDs afterwards, but couldn't find a way to do it.
I granted the AD Computer account Full Control to the CIFS share, so it should work, but I just can't work it out at the moment.
View 0 Replies
View Related
Dec 18, 2014
I want to setuo AlwaysON that requires Node and FileShare Majority Quorum settings..
I want to know how to configure File share for windows clustering ????
View 2 Replies
View Related
Apr 29, 2008
SQL server 20005 SP2 is install in my WIN XP machine. I implement a SSRS report and try to deliver the report to a share folder in window 2000 server.
I create and set permissions on a shared folder as per the information in http://msdn2.microsoft.com/en-us/library/ms345228.aspx. The account that I use in subscription is local admin account in the target machine.
I have try path \<servername>c$XXX and \<servername>XXX. Both is not ok.
I find following error message in the log file of reporting service.
ReportingServicesService!library!d!04/29/2008-00:03:40:: e ERROR: Throwing Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider+NetworkErrorException: A logon error occurred when attempting to access the file share. The user account or password is not valid., A logon error occurred when attempting to access the file share. The user account or password is not valid.;
Info: Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider+NetworkErrorException: A logon error occurred when attempting to access the file share. The user account or password is not valid. ---> System.Runtime.InteropServices.COMException (0x8007052E): Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSRemoteRpcClient.RemoteLogon.GetRemoteImpToken(String pRPCEndpointName, Int32 type, Guid dataSourceId, String pUserName, String pDomain, String pPassword)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.GetImpersonationToken(String userName, String domain, String userPwd)
--- End of inner exception stack trace ---
If I try to deliver same report to a share folder in WIN XP in the same way. It is ok.
View 7 Replies
View Related
Oct 1, 2014
I have a Windows Server 2012 R2 2 node cluster with SQL Server 2014 FCI installed. Data files are on a separate Windows Server 2012 R2 file server. Data files share has been permissioned to the SQL Server service and SQL Server Agent service accounts as Full Control. NTFS Permissions are Full Control.
When I try to attach a database
CREATE DATABASE AdventureWorksDW2012
ON (FILENAME = 'apricotmssql_VIOLETMSSQL12.MSSQLSERVERMSSQLDATAAdventureWorksDW2012_Data.mdf')
FOR ATTACHI get this error:
Msg 5120, Level 16, State 101, Line 4
Unable to open the physical file "apricotmssql_VIOLETMSSQL12.MSSQLSERVERMSSQLDATAAdventureWorksDW2012_Data.mdf". Operating system error 5: "5(Access is denied.)".
If I log into the file server (called APRICOT) and look at the NTFS permissions they all look good. I have also reapplied the NTFS permissions from the root folder down.
EDIT
If I log on to one of the nodes in the cluster as the SQL Server service account and navigate to apricotmssql_VIOLETMSSQL12.MSSQLSERVERMSSQLDATA and copy and paste the data file, it works fine.
EDIT2:
If I log on to the file server and Enable Inheritance at the root level, then Replace all child objects with inheritable permission entries from this object, I get this error:
User Account Control settings on all nodes and the file server are set to Never notify
View 0 Replies
View Related
Mar 15, 2007
I have just installed MS SQL Server 2005 Express edition along with the SSMSE. I am using windows authentication. When I open SSMSE it connects me to a 'local instance' of the server. From there I right click on Database and select to add a new Database and I get the error above. I think I only need to allow local connections to the engine but I have tried allowing remote conections with all varations of named pipes and TCP/IP. I am running on Windows XP SP2 (home).
View 1 Replies
View Related
Feb 20, 2014
We have a Customized share point application with Very minimal data usage and we have used only 5 to 6 lists and libraries only in the share point.
Configuration is
Clients -- fire wall --- Load Balancer ---- WF1 and WF2 --- SQL DB
ROUTING IS VIA FIRE WALL.
SUDDENLY THE SITE GOT DEAD SLOW AND UNABLE TO TRACE THE PROBLEM AS EVERY THING LOOKS FINE.
Checked with the firewall Team and they stated its fine from their end & even we have verified the counters, CPU, Memory & Page life expectancy, buffer counters all looks good and even we do not have huge data in the database. We have only 50 concurrent users are working...
View 2 Replies
View Related
May 23, 2006
Hi --I was wondering if this is a bug when I add new data in my table SSIS Confiurations and give wizard a new Configuration filter the package configuration wizard can not see the new values --the old values from the previous configuration are still showing---is there any known workaround or forced refresh I can do
thanks in advance Dave
Background:
SQL Package Configurations are most important because they provide the possibility of a central configuration store for your entire enterprise!!!!!!!! and is in my mind the only way to go
http://sqljunkies.com/WebLog/knight_reign/archive/2005/01/24/6843.aspx
Wizard results:
Name:
ETL
Type:
SQL Server
Connection name:
ETLConfiguration
Any existing configuration information for selected configuration filter will be overwritten with new configuration settings.
Configuration table name:
[dbo].[SSIS Configurations]
Configuration filter:
PT_CUST_ABR
Target Property:
Package.Variables[User::gsPreLoad].Properties[Value]
Package.Variables[User::gsPostLoad].Properties[Value]
Package.Variables[User::gsLoad].Properties[Value]
Package.Variables[User::gsFlatFilename].Properties[Value]
Package.Variables[User::gsFileName].Properties[Value]
Package.Variables[User::gsCDOMailTo].Properties[Value]
Package.Variables[User::gsCDOMailSubject].Properties[Value]
Package.Variables[User::giRecordCount].Properties[Value]
Package.Variables[User::giFileSize].Properties[Value]
Package.Variables[User::giBatchID].Properties[Value]
Package.Variables[User::gdFileDateCreated].Properties[Value]
Package.Connections[MyDatabase].Properties[ServerName]
Package.Connections[MyDatabase].Properties[InitialCatalog]
USE [ETLConfiguration]
GO
/****** Object: Table [dbo].[SSIS Configurations] Script Date: 05/23/2006 13:34:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[SSIS Configurations](
[ConfigurationFilter] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValue] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL,
[PackagePath] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValueType] [nvarchar](20) COLLATE Latin1_General_CI_AS NOT NULL
) ON [PRIMARY]
View 3 Replies
View Related
Jul 13, 2015
I am looking to test this feature - and the "Transaction Performance Collector" has recommended me a table to port to In-Memory OLTP.Â
I have now tried the "Table Memory Optimization Advisor" tool.
After a couple of tweaks to the table design - the tool is now passing validation but the tool is not allowing to progress to the next step:
Could it be down to not having enough memory? But would this not show in the advisor?
View 4 Replies
View Related
Sep 28, 2007
Hello. I have received the follwoing error upon an attempt to Browse the Cube. All other tabs are functional, including the Calculations tab. We are running Windows Server 2003 SP2 and SQL Server 2005 SP2. Any suggestions would be greatly appreciated!
**EDIT** - Have confirmed SP1 for VS2005 is installed both locally and on server, also.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.Office.Interop.Owc11.PivotView.get_FieldSets()
at Microsoft.AnalysisServices.Controls.PivotTableFontAdjustor.TransformFonts(Font font)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdatePivotTable(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdateAll(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.InitialUpdate()
at Microsoft.AnalysisServices.Browse.CubeBrowser.SupportFunctionWhichCanFail(FunctionWhichCanFail function)
View 4 Replies
View Related
Oct 11, 2007
I've been researching AWE to determine if we should enable this for our environment.
Currently we have a quad core box with 4 gb of RAM (VMware). OS: Windows 2003 std, SQL Server 2005 std. 3GB is not set but will be as soon as we can perform maintenance on the server.
I have read mixed feedback on AWE, either it works great or grinds you to a hault. I would assume that the grinding to a hault is due to not setting the min/max values correctly or not enabling the lock page in memory setting.
We only have one instance of SQL on the server and this box won't be used for anything else aside from hosting SQL services. We do plan on running SSRS off of this server as well.
1. Will running SSRS and enabling AWE cause me problems? Will I have to reduce the max setting by the SSRS memory usage or will it share and play nice?
2. How do I go about setting the Max value? Should it be less than the physical RAM in the box? Right now its set to the default of 214748364, even if I don't enable AWE should this default value be changed?
3. It seems that even at idle the SQL server holds a lot of memory and the page file grows. If I restart the process in the morning, memory usage in taskmon is at 600mb or so. By the end of the day, its up around 2gb. How can I track down whats causing this, should this even concern me?
4. The lock Page in memory setting worries me. Everything I've read on this seems to give a warning about serious OS and other program support degradation. In some cases to the point where they have to restore the settings on the server before they can bring it back up. What are your thoughts on this.
View 3 Replies
View Related
Jan 14, 2006
It seems to me, that the best way is to have one Environment Varible containing the name of the SQL Server, so that you can look up the configuration in the SSIS Configuration Table when you run the package.
Is this the preferable way of doing it ? I would like to hear some positive/negative comment of why chosing a configuration type instead of another.
It seems to me that putting all of the configuration in the Environment variable is harder work but most secure (server breakdown vs table corruption/database error...)
Let's have some comments
View 3 Replies
View Related
Aug 28, 2015
I have a Windows sever 2012 with sql server 2012 enterprise. Ram size is 22GB. Sometimes SQL sever takes 95% memory.My question, How to reduce memory size without killing any process because it's production server.So there are many background process is running. And,Is there any guides to learn why Memory is raise d so high and how to reduce it.
View 10 Replies
View Related
Mar 27, 2008
Hello, I understand that we should use SSMS -> Server Properties -> Memory to put a cap on the SQL server memory usage, therefore it gives some space memory for OS, this is based on the fact if the max memory is not specified, SQL will use whatever available memory and eventually crash the system.
My question is that when a server has SSIS and SSAS services installed along with the SQL service. Would the max memory setting covers the SSIS and SSAS memory usage, or the SSIS and SSAS has to shared the memory with OS?
Thanks,
fshguo.
View 1 Replies
View Related
