I've been working on serveral packages for the past hour and after finishing for the night I quickly wanted to check to see how much memory SQL Server was consuming on my laptop. It was using almost 500MB of memory. It typically hovers around 50-100MB when I'm not doing anything with it. Is this normal?
View 3 RepliesHi,
I've thre problem that our MSDE SQL-Server 2000 (without SP3) memory consumption is constantly increasing. Even though, that I limitet the 'max server memory' with sp_configure and RECONFIGURE it's growing above that limit.
When I shut down the application, SQL server does not free the memory. I was already checking the database file size (transaction logs) and made shure that autoshrinking is enabled.
Does anybody have an idea, why SQL-Server does not release the memory?
Thanks for support, rene
Hello!
We have a SQL Server 2000 that has been working nice
without any issues. Lately we noticed the fact that the amount of memory that
it is using has increased and once it took down the web server as the total
amount of memory used was 2G. Due to this fact I have set Memory Max to 500MB.
Now as I look in Task Manager the Memory usage is at 530396k which is 518MB.
Any reason why would it exceed the 500MB?
What we did before was to stop the SQL Server and restart it, and it takes about
2 days until it gets back to +500MB.
What can I do to stop this behavior?
Thanks.
Hi all,
I have two database server, named it DB_A and DB_B. I want to establish a linked server of DB_A in my DB_B. There's a script in DB_B that queries data from DB_A but only execute periodically. Does linked server consume large memory or CPU when it didn't use ?
Thanks in advance,
Hery
I know I can run DBCC MEMORYSTATUS to view how much memory SQL Server is using on a 64-bit server, but how do I view how much memory the other processes are consuming?
I do not believe the Perfmon counters are accurate when using AWE or 64-bit memory, at least in terms of memory consumption per process so how do we see this information. I have a feeling it is not possible.
Here is the problem. We have a 64-bit server with 32GB of memory. SQL Server is configured to use no more the 20GB. It currently is using only 15GB. The O/S is reporting 28.3GB used out of 32GB, which means some other processes are consuming 28.3GB - 15GB = 13.3GB. How can I determine what is using the 13.3GB of memory?
Thanks, Dave
Hi to all, on our project we are facing this problem: our users using report builder are making reports containing several Mb of data (sometimes also 1Gb!). Now it happens that when 3-4 users do a report like that on the server the process w3wp.exe reaches also 10 Gb of memory allocated and then the whole reporting services istance stops working.
We want to limit the number of rows that can be extracted from the sql server db using report builder. In the report model reference seems that there is not this kind of option (something like "max rowcount"). Is it possible to set this limit to the user that connects to sql server (something like: whatever is the query this user does, set @@rowcount to 10000)?
Thanks.
Alberto.
I know I can run DBCC MEMORYSTATUS to view how much memory SQL Server is using on a 64-bit server, but how do I view how much memory the other processes are consuming?
I do not believe the Perfmon counters are accurate when using AWE or 64-bit memory, at least in terms of memory consumption per process so how do we see this information. I have a feeling it is not possible.
Here is the problem. We have a 64-bit server with 32GB of memory. SQL Server is configured to use no more the 20GB. It currently is using only 15GB. The O/S is reporting 28.3GB used out of 32GB, which means some other processes are consuming 28.3GB - 15GB = 13.3GB. How can I determine what is using the 13.3GB of memory?
Thanks, Dave
Hi there,
I have a large XML document (100Mg) that I want to process through a data
flow process.
Part of the process is to Sort the various relational tables created by the XML Source - then merge join them.
The Sorts consume all the available memory and the process grinds to a halt.
However, if I source the same data from SQL tables, the sorts don't consume anywhere near as much memory.
So a couple of questions:
1. Is there a difference between the way SSIS sorts XML Source Data and the way it sorts OLE DB Source Data?
2. Are there any techniques/best practices when dealing with large XML Files?
Thanks,
Dave.
When Running the standard Memory Consumption Report in the section Buffer Pages Distribution (# Pages) i get the following error
Unable to retrieve data for this section of the report. Following error occurred. Msg 8114, Level 16, State 1 Error converting data type bigint to int.
Any Ideas
Hi,
I have a webservice, which I am using in the Web service Task. The XML response, is fed to the XML source and I want to write the data from this XML to flat file. I am using the below attached schema definition for XML (.XSD). When I use this as XSD in the XML source task, in the column definition I see only three columns and they are
ZoneCode
ZoneName
AggregatedCZ_Id
My question is what is AggregatedCZ_Id and why I do not see the PostCode in the columns? Any help is appreciated.
<?xml version="1.0" encoding="utf-8"?>
<xs: schema elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://microsoft.com/wsdl/types/" />
<xs:element name="ResponseZoneDetailsReport" nillable="true" type="ResponseZoneDetailsReport" />
<xs:complexType name="ResponseZoneDetailsReport">
<xs: sequence>
<xs:element minOccurs="0" maxOccurs="1" name="PostCode" type="xs: string" />
<xs:element minOccurs="0" maxOccurs="1" name="AggregatedCZ" type="ArrayOfComplianceZoneDetails" />
</xs: sequence>
</xs:complexType>
<xs:complexType name="ArrayOfComplianceZoneDetails">
<xs: sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" name="ComplianceZoneDetails" nillable="true" type="ComplianceZoneDetails" />
</xs: sequence>
</xs:complexType>
<xs:complexType name="ComplianceZoneDetails">
<xs: sequence>
<xs:element minOccurs="0" maxOccurs="1" name="ZoneCode" type="xs: string" />
<xs:element minOccurs="0" maxOccurs="1" name="ZoneName" type="xs: string" />
</xs: sequence>
</xs:complexType>
</xs: schema>
Regards,
Virendra
Hello, I understand that we should use SSMS -> Server Properties -> Memory to put a cap on the SQL server memory usage, therefore it gives some space memory for OS, this is based on the fact if the max memory is not specified, SQL will use whatever available memory and eventually crash the system.
My question is that when a server has SSIS and SSAS services installed along with the SQL service. Would the max memory setting covers the SSIS and SSAS memory usage, or the SSIS and SSAS has to shared the memory with OS?
Thanks,
fshguo.
I am running Visual Studio 2005. I have an SSIS Package which is consuming a huge amount of memory. During the execution of the package the memory keeps increasing. Until finally i get an Out of Memory exception. I have run this package using dtexec, and in the BIDS. No difference. I do have some script components and have added some code to get the assemblies in the current appdomain. I do see that one particular assembly is increasing on every loop. VBAssembly every time it hits the script component is increasing by 6, and along with it the memory is climbing. What is this VBAssembly being used for is there an update to SQL Server Integration Services that I need?
Thanks! Aaron B.
I'm busy rewriting DTS packages as SSIS packages. As and when I finish a package I run it in debug mode via Microsoft Visual Studio and then examine the Exection Results to see the messages generated.
Now it may or may not matter how I run the package but the following warning has been generated :-
[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
Hi
I did a load testing and found the following observations:
1. The Memory:Pages/sec was crossing the limit beyond 20.
2. The Target Server Memory was always greater than Total Server Memory
Seeing the above data it seems to be memory pressure. But I found that AvailableMemory was always above 200 MB. Also Buffer Cache HitRatio was close to 99.99. What could be the reason for the above behavior?
I got a task to get resource consumption (CPU, storage etc.) for stored procedures in certain database. I found nice script ([dbo].[usp_Worst_TSQL]) but looks like script written for SQL 2005 and we use SQL 2012.how to get resource consumption details.
View 9 Replies View Relatedsql server 2000 is running on windows server 2003 ... 4gb of memory on server .... 2003 was allocated 2.3gb nd sql server was allocated (and using all of it) 1.6gb for total of approx 4gb based on idera monitor software ... all memory allocated betweeen the OS and sql server .... then 4 more gb of memory added for total now of 8g ... now idera monitor shows 1.7gb for OS and 1.0 gb for sql server ..... 'system' info shows 8gb memory with PAE ... so I assume that the full 8gb can now be addressed .... why are less resources being used now with more total memory .... especially sql server ..... i thought about specifying a minimum memmry for sql server but i amnot convinced that would even work since it seems that this 1gb limit is artificial .... it it used 1.6 gb before why would it not use at least that much now ??
thank you
If we have a SQL Server 2005 standard edition/Windows 2003 Standard Environment on a 32 bit 2 dual core proc Dell 2850 server, what is the maximum size of the memory we could possibly have?
Thank you,
Shiva
I have a WO-WO (no sorting, aggregating, etc.) SSIS package that reads ~26,000,000 rows from a SQL DataReader source, looks up a bunch of surrogate keys, derives a couple of values, and writes out to two SQL Server Destinations. The process gradually consumes all of the memory on the server, slowing it to a crawl. I reconfigured SQL Server to use a maximum of 8000 MB to mitigate the problem; however, the memory is not released unless I stop and restart SQL Server. Is this expected behavior for SSIS?
View 4 Replies View RelatedWe are planning a shared SQL Server 2005 enviroment where users can create databases/applications for themselves and/or departments. With the consideration that there can be multiple SQL Servers on a box, can each instance limit a user's disk space? Thanks for any enlightenment.
Hi all, what's the recommended way of passing a parameter than can be consumed properly by a SQL statement using the IN keyword.
For Example:
proc Test @Param varchar(200)
as
begin
SELECT FieldA, FieldB
FROM TABLE
WHERE FieldA IN (@Param)
end
An option is making the query into a string
strSQL = "SELECT FieldA, FieldB FROM TABLE WHERE FieldA IN (" + @Param ")"
then executing the string, but I was wondering if there is a more effective way?
Thanks
Hi!
I am currently encountering an error of testing an SSIS package in the server.
The package runs fine on my laptop, but not in the server.
I appreciate it for any of your input, comments, and suggestions.
The package is to populate records (150k rows) from a DB2 table and insert them into
another DB2 table (12,754,715 rows).
The server,
Windows Server 2003 Enterprise
SQL server 2005 sp1
8 CPUs
6 GB RAM
Native OLE DBIBM OLE DB Provider for DB2
My laptop,
Windows 2000 Professional
SQL server 2005 sp1
2 CPUs
2 GB RAM
Native OLE DBIBM OLE DB Provider for DB2
It fails on the insertion part (see the error message at the bottom). I have been playing with "DefaultBufferMaxRows" and "DefaultBufferSize" properties, but still no luck so far.
For the testing purpose, I even only select 2 rows from the source table, but it still fails with the same error message. And strangely, it still takes a very long time to process (for just two rows). In my laptop, it only takes few second to finish.
I have been really pulling my head to try to figure it out. Any of your help/input is highly appreciated! Thanks!
======================
Error Message
[POLICY [1683]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8007000E. An OLE DB record is available. Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description: "Out of memory.".
Hi -
I am facing 2 problems :
PROBLEM 1 :
We have a few packages that run pretty fast on a desktop server with 2 Gig RAM, Dual processor (approx 4-5 hours). But the same packages run very very slow on the another server containing 8 CPU and 12 Gig RAM (ran for 24 hours without completing).
PROBLEM 2 :
The CPU% ranges from 40-80% and the PF usage is stagnant at 2GB on desktop server for the same package. But in the 8CPU server, the CPU % ranges from 0-10% but the PF Usage raises from 750 MB to 8 GB.
This has become critical to our application.
TIA,
Shabs
I have an SSIS Package that loads data from a log file. Prior to loading the data I need to prepare the file. I run a script that cleans the file. Then I import the flat file into SQL Server.
Log File Management Task
1. Run Unix Log File Task
2. Import the new log file (flat file) into SQL Server
Error
i.Unix.dtsx
Message: The script threw an exception: Exception of type 'System.OutOfMemoryException' was thrown.
Is this because the system is running out of memory? The RAM on the server is 4gb. Below is a sample of the script. The job doesn't always fail; there are times when the job executes with success and other times when it fails.
Script Source Code
-----------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports System.Collections.Generic
Imports System.IO
Imports System.Text
Imports System.Diagnostics
Imports System.Globalization
Imports Microsoft.VisualBasic
Imports System.Text.RegularExpressions
Public Class ScriptMain
'********** Begin Error Log Settings **********
'Dim sSource As String = "i.SSIS.Unix.FileManager"
'Dim sLog As String = "Application"
'Dim sMachine As String = "."
'Dim ELog As New EventLog(sLog, sMachine, sSource)
'********** End Error Log Settings **********
Public Sub Main()
'variables for the unix log file
Dim newFile As String = "D:iLogunixlog.txt"
Dim copyFile As String = "\server16iLogunixlog.txt"
'variables for working log files
Dim oldFile As String = "D:i empunixlog.txt"
Dim difFile As String = "D:i empunixdiff.txt"
Dim trimdiff As String = "D:i empunixdifft.txt"
Dim formatTemp As String = "D:i empunixlog_formatted.txt"
Dim errorFile As String = "D:i empunixlog_bad.txt"
'delete unixlog.txt copy unixlog.txt
'if the file is on the local server delete it and copy the new file over
'if the file is not present copy the new file over
Try
If File.Exists(newFile) Then
File.Delete(newFile)
File.Copy(copyFile, newFile)
Else
File.Copy(copyFile, newFile)
End If
While Not File.Exists(newFile)
System.Threading.Thread.Sleep(1000)
End While
'ELog.WriteEntry("FileCopy.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("FileCopy.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
'open the old file; read backwards until we reach the carriage
'return and store that "seek" position; now open the new file and
'seek to that stored position. finally, read the rest of the file
'and write that data to the difference file.
' determine position of last line in the old file
Dim lastLine As Long = GetLastLinePosition(oldFile)
' get all data in new file starting at position determined above
Dim fi As New FileInfo(newFile)
Dim buffer(fi.Length - lastLine) As Byte
Dim fs As New FileStream(newFile, FileMode.Open)
Try
fs.Seek(lastLine, SeekOrigin.Begin)
fs.Read(buffer, 0, buffer.Length)
fs.Close()
' write that new data to the difference file
fs = New FileStream(difFile, FileMode.OpenOrCreate, FileAccess.Write, FileShare.None)
fs.Write(buffer, 0, buffer.Length)
fs.Close()
'ELog.WriteEntry("FileCopy.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("FileCopy.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
'remove the partial row from the difference file
Try
TrimFinal(difFile, trimdiff)
'ELog.WriteEntry("TrimFinal.Call.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("TrimFinal.Call.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
'perform the file formatting
sFormatFile(trimdiff, formatTemp, errorFile)
'
Dts.TaskResult = Dts.Results.Success
End Sub
Function GetLastLinePosition(ByVal fileName As String) As Long
Dim pos As Long = -1
Dim fs As New FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.ReadWrite)
Try
fs.Seek(-2, SeekOrigin.End) ' -2 to skip a potential vbcrlf at the end of file
While fs.Position > 0
fs.Seek(-1, SeekOrigin.Current)
If fs.ReadByte = 10 Then
pos = fs.Position
Exit While
Else
fs.Seek(-1, SeekOrigin.Current)
End If
End While
fs.Close()
'ELog.WriteEntry("GetLastLinePosition.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("GetLastLinePosition.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
Return pos
End Function
Sub TrimFinal(ByVal difFile As String, ByVal trimdiff As String)
Dim fi2 As New FileStream(difFile, FileMode.OpenOrCreate, FileAccess.Read)
Dim fo2 As New FileStream(trimdiff, FileMode.OpenOrCreate, FileAccess.Write)
Dim sr2 As New StreamReader(fi2)
Dim sw2 As New StreamWriter(fo2)
Dim line2 As String
Try
Do While sr2.Peek <> -1
line2 = sr2.ReadLine()
If (sr2.Peek <> -1) Then
sw2.WriteLine(line2)
End If
Loop
sw2.Flush() : sw2.Close()
sr2.Close()
fi2.Close() : fo2.Close()
'ELog.WriteEntry("TrimFinal.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("TrimFinal.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
End Sub
Sub sFormatFile(ByVal currentFile As String, ByVal tempFile As String, ByVal errorFile As String)
Dim tfp As New Microsoft.VisualBasic.FileIO.TextFieldParser(currentFile)
Dim sw As New System.IO.StreamWriter(tempFile)
Dim swErrorFile As New System.IO.StreamWriter(errorFile)
tfp.TextFieldType = FileIO.FieldType.Delimited
tfp.SetDelimiters(",")
tfp.HasFieldsEnclosedInQuotes = True
tfp.TrimWhiteSpace = True
Dim fields() As String
Try
While Not tfp.EndOfData
Try
fields = tfp.ReadFields()
If fields.Length <> 23 Then
'write bad rows to error-file
swErrorFile.WriteLine(String.Join(",", fields))
Else
If fields(3) = "" And fields(13) = "" Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
ElseIf IsDate(fields(3)) = True OrElse fields(3) = Format(CDate(fields(3)), "yyyy-MM-dd HH:mms") And fields(13) = "" Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
ElseIf IsDate(fields(13)) = True OrElse fields(13) = Format(CDate(fields(13)), "yyyy-MM-dd HH:mms") And fields(3) = "" Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
ElseIf IsDate(fields(3)) = True OrElse fields(3) = Format(CDate(fields(3)), "yyyy-MM-dd HH:mms") _
And IsDate(fields(13)) = True OrElse fields(13) = Format(CDate(fields(13)), "yyyy-MM-dd HH:mms") Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
Else
swErrorFile.WriteLine(String.Join(",", fields))
End If
End If
Catch ex As Exception
'ELog.WriteEntry("sFormatFile.TFP.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 0, CType(4, Short))
End Try
End While
tfp.Close()
sw.Close()
swErrorFile.Close()
File.Delete(currentFile)
File.Move(tempFile, currentFile)
'ELog.WriteEntry("sFormatFile.Success".ToString(), EventLogEntryType.SuccessAudit, 0, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("sFormatFile.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 0, CType(4, Short))
Finally
GC.Collect()
End Try
End Sub
End Class
-------------------------
Does my script seem okay for releasing the server memory usage?
Thanks.
Hi,
I have a series of SSIS packages, all of which are ultimately executed by a parent package.
I'm consitently getting "OutOfMemory" errors when working with the packages which is temporarily solved by closing Visual Studio and re-opening the package(s)... This solution is short lived however as the OutOfMemory error occurs quite quickly after re-opening, often after doing nothing other than altering a variables default value and attempting to save the package.
The average size of the packages in question (.dtsx files) is around 7,000kb with the largest being 12,500kb. The total size of all the solution's packages is ~75,000kb.
The Processes tab in Task Manager shows a Mem Usage counter for devenv.exe *32 of around 20,000kb when Visual Studio is first opened however, when a single ~6,000kb dtsx file is opened this counter jumps to +300,000kb and when the entire solution is opened (When the parent package is executed), the Mem Usage counter for devenv.exe *32 is a massive +800,000kb!!!
Is this normal SSIS behaviour or do I have a major problem? Any tips or suggestions as to how to resolve this issue would be gratefully received.
FYI, "SELECT @@VERSION" gives me "Microsoft SQL Server 2005 - 9.00.3042.00 (X64) Feb 10 2007 00:59:02 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2) "
My Server is Windows Server 2003 R2 Enterprise x64 SP2 with 8GB of RAM.
Thanks in advance.
Leigh.
Dear Friends
I have SSIS package When I run it SQL Server memory Shoots Very Much
How To check and Solve this problem When I queried In the same package as sp it does not take that much memory
please help me how to control SQL Memory shoot.
I see following error when I execute a SSIS package as part of a job from within SQL Server
OnInformation,006-CIS-SQL,apdsvcPM2SQL,VistaMain,{F902B487-D543-4F31-AC80-EF088CD0CBA4},{74325B35-DC59-4B51-AE8E-756BCC879633},10/18/2007 6:15:12 AM,10/18/2007 6:15:12 AM,1074036748,0x,The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 4 buffers were considered and 4 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
SQL Server has 6 GB memory allocated to it. How can I best troubleshoot this issue?
HI ,
Need some quick fix Help
I have been
trying to load data from AS400 to DB2 (windows) using ADO.NET connection in
Data reader source and OLEDB Destination (IBM Oledb provider )
The files, I€™m trying to load, have
number of rows more then 15 million.
On execution of the package I get
Out of Memory Error (see below)
My Destination Box is 4GB+ RAM and 4
CPU Box.
There seems to be some Buffer and
Swapping related issue which I€™m not able to figure out. It says that System is
unable to allocate memory
Please help me on the same.
Thanks in Advance
Amit S
SSIS package "ABCDE
1.dtsx" starting.
Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2003 to 2004, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2003 to 2004, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2003 to 2004, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE
2003 to 2004, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at ABCDE
2003 to 2004, OLE DB Destination [12]: An OLE DB error has occurred. Error
code: 0x8007000E.
An OLE DB record is available.
Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description:
"Out of memory.".
Error: 0xC0047022
at ABCDE 2003 to 2004, DTS.Pipeline: The ProcessInput method on component
"OLE DB Destination" (12) failed with error code 0xC0202009. The
identified component returned an error from the ProcessInput method. The error
is specific to the component, but the error is fatal and will cause the Data
Flow task to stop running.
Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "WorkThread0" has exited with
error code 0xC0202009.
Error: 0xC02090F5
at ABCDE 2003 to 2004, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE
2003 to 2004, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE
2003 to 2004, DTS.Pipeline: Thread "SourceThread0" has exited with
error code 0xC0047038.
Information: 0x40043008 at ABCDE
2003 to 2004, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE
2003 to 2004, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE
2003 to 2004, DTS.Pipeline: "component "OLE DB Destination"
(12)" wrote 289188 rows.
Task failed: ABCDE 2003 to
2004
Warning: 0x80019002 at ABCDE
1: The Execution method succeeded, but the number of errors raised (6) reached
the maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.
Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
2.dtsx
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Execute phase is beginning.
Information:
0x4004800D at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The buffer manager failed
a memory allocation call for 10484320 bytes, but was unable to swap out any
buffers to relieve memory pressure. 3 buffers were considered and 3 were
locked. Either not enough memory is available to the pipeline because not
enough are installed, other processes were using it, or too many buffers are
locked.
Error: 0xC0047012
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: A buffer failed while allocating
10484320 bytes.
Error: 0xC0047011
at ABCDE 2005_04 to 2005_11, DTS.Pipeline: The system reports 63 percent memory
load. There are 4294660096 bytes of physical memory with 1548783616 bytes free.
There are 2147352576 bytes of virtual memory with 227577856 bytes free. The
paging file has 6268805120 bytes with 3607072768 bytes free.
Error: 0xC02090F5 at ABCDE
2005_04 to 2005_11, DataReader Source [61]: The component "DataReader
Source" (61) was unable to process the data.
Error: 0xC0047038 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: The PrimeOutput method on component
"DataReader Source" (61) returned error code 0xC02090F5. The
component returned a failure code when the pipeline engine called
PrimeOutput(). The meaning of the failure code is defined by the component, but
the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "SourceThread0" has exited
with error code 0xC0047038.
Error: 0xC0047039 at ABCDE 2005_04
to 2005_11, DTS.Pipeline: Thread "WorkThread0" received a shutdown
signal and is terminating. The user requested a shutdown, or an error in
another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Thread "WorkThread0" has exited
with error code 0xC0047039.
Information: 0x40043008 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at ABCDE
2005_04 to 2005_11, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at ABCDE
2005_04 to 2005_11, DTS.Pipeline: "component "OLE DB
Destination" (12)" wrote 0 rows.
Task failed: ABCDE 2005_04 to
2005_11
Warning: 0x80019002 at ABCDE:
The Execution method succeeded, but the number of errors raised (7) reached the
maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the
MaximumErrorCount or fix the errors.
Executing ExecutePackageTask:
C:Documents and SettingsAdministratorMy DocumentsVisual Studio
2005ProjectsIntegration Services Project1Integration Services Project1ABCDE
3.dtsx
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at ABCDE
2005_11 to 2006_04, DTS.Pipeline: Pre-Execute phase is beginning.
€¦€¦.
€¦€¦€¦€¦
Hi,
when i am trying to execute package in ssis then given below errors comes many times.how to fix it.any body can ......
in ssis default buffer size 10 mb.
soure is iseries-db2 on as400 in production server ,
and destination is db2 udb on windows in dev server.
usersapce page size in db2 is 16-32k
4 gb ram support in server with 2003 server standard edition.
errors are---
Information: 0x4004800D at CHDRPF 312-315, DTS.Pipeline: The buffer manager failed a memory allocation call for 15728400 bytes, but was unable to swap out any buffers to relieve memory pressure. 3 buffers were considered and 3 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CHDRPF 312-315, DTS.Pipeline: A buffer failed while allocating 15728400 bytes.
Error: 0xC0047011 at CHDRPF 312-315, DTS.Pipeline: The system reports 83 percent memory load. There are 3488509952 bytes of physical memory with 558743552 bytes free. There are 2147352576 bytes of virtual memory with 222920704 bytes free. The paging file has 7416537088 bytes with 3703283712 bytes free.
Error: 0xC0047056 at CHDRPF 312-315, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "DataReader Source" (15437) on component "DataReader Output" (15442). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CHDRPF 312-315, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0x8007000E.
Error: 0xC0047039 at CHDRPF 312-315, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CHDRPF 312-315, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
so what need to do for fix that problem ......
I've read that SSIS tries to do all transformations in memory as a way of enhancing processing speed. What happens though if the amount of data processed exceeds the available RAM? Are raw files then used (similar to staging tables) or is an error generated?
Barkingdog
i have a nightly job (SSIS Package) scheduled using MS. The package loads data from the OLTP db to the warehouse. The server has 256GB memory and out of which 211GB is free.
the job runs w/o any problems but some times it fails with the following error"DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint '<var>PrimaryKeyName</var>'. Cannot insert duplicate key in object '<var>TableName</var>'.".
When i researched this error i found out that its because of the memory issue. we have 222GB free memory and how come this is possible. Is there a way in the package or anywhere else where i can specify how much (percentage) of the memory that the SSIS package should use (something like SSRS threshold levelp).
I'm trying to import data from a Sybase ASE 12.0 database called "OurTestDatabase" into MS SQL Server 2005. I started SSIS Wizard and indicated "Sybase ASE OLEDB Provider" as a source and SQL Native Client as the target. I'm gettign the following error message:
-----------------------------------------------------------------------------------------------------------------
Cannot get supported data types from the database connection
"Provider=Sybase.ASEOLDEDBProvider;Password=;Persist Security Info=True;User ID=sa;Data Source=sybase;Initial Catalog=OurTestDatabase"
Additional information
|_ Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Data)
-----------------------------------------------------------------------------------------------------------------
The same data source worked with DTS when we thought we'd convert to MS SQL Server 2000. Is this a bug in SSIS? What can be done? Using ".Net Framework Provider for ODBC" is not a good option because this doesn't allow me to choose any tables from the Sybase source.
Any help is greatly appreciated.
Visual Studio runs out of memory when trying to use SSIS package. I am trying to create and run a SSIS package that validates and imports some large xml files >200MB. Validation fails because Visual studio cannot open large files without running out of memory.
The SSIS package throws this error when I run the package..at the validation task.
Error: 0xC002F304 at Validate bio_fixed, XML Task: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".
How do I increase the amount of RAM that VIsual Studio can use...I have plenty of RAM on my workstation >3GB, but VS chokes maybe around 100MB files?
Thanks,
Forrest
When attempting to save an SSIS package in Visual Studion I receive the following error message detailed below. If I attempt to "Save As" to another location, I then receive an insufficient storage error. The development machine has over 1.5 GB of available physical memory and several GB of disk space availabe to save my 16 MB package. I have checked the event log and have found no related messages in the Application or Server logs.
Any suggestions on how to determine the cause or resolution of this error message would be greatly appreciated.
Failure saving package. (Microsoft Visual Studio)
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
Advanced Error Message Details
Failure saving package. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream)
at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie)
===================================
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Package.SaveToXML(String& packageXml, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)