I've recently noticed the availability of SQL Server Mobile, and would
like to take advantage of some of the new features, however, I'm
currently using Visual Studio 2003. The requirements state that Visual
Studio 2005 is required, but I was wondering if anyone has had any
success getting it to work with VS 2003?
I hope that I can do this with VS 2003, but if VS 2005 will be
required, I'd like to clear up a few issues before asking my workplace
to fork out more money for the upgrade:
What have your experiences been like in getting clients to
upgrade from SQL Server CE to SQL Server Mobile? I've seen some
postings regarding problems with specific devices which seem a bit
worrying, but I was wondering how easy it was in general.
Does SQL Server Mobile really do a good job of reclaiming wasted
space? Using SqlCeEngine's Compact method has caused problems due to
the required storage space to perform the operation.
The documentation states that using SQL Server 2000 with SP3A is
supported, but I was wondering if anyone has any experience with this?
I'm attempting to connect to my SQL Server Express instance through Visual Studio 2003. When I go to Data Connections, I choose the Microsoft OLE DB Provider for SQL Server, then fill in all the parameters for my server (server name, username, password, database). When I click "Test Connection" it goes through successfully. When I click "Ok" to create the Data Connection, it fails saying that the username and password should be checked. I changed the username and password to the "sa" account I created when I installed SQL Server Express, and got the same successful connection test, but failure when it tries to create the connection. Any suggestions? Thanks!
I have been experiencing troubles since I was decided to install SQL Server Expr 2005 in my PC, first I needed to remove the .NET framework 1.1 in my computer because it is suggested before installing sql server expr 2k5 that cause my vs.net 2003 to stop loading because sql express runs in .NET framework 2.0 and vs.net 2003 is in .Net Framework 1.1 then what I did is to install .Net Framework 1.1 in my PC together with .Net Framework 2.0 and my vs.net started runnning again.
My problem now is when I try to connect to a database using Data Link Properties in the Server Explorer it says "[DBNETLIB][ConnectionOpen](Connect()).]Sql server does not exist or access denied." how could this happen if I can see the sql server in the Server Explorer in my VS.net environment?
Please somebody help me I am just learning to this language and I think I cannot proceed to the next few chapters remaining because of this.
I need help setting up my laptop so that I can develop using Visual Studio 2003 and SQL Server 2000. I currently have both installed on my laptop but can not get them to play nicely together. Here is my connection code:
//string strConnection = "Provider=Microsoft.Jet.OleDb.4.0;"; //strConnection += @"Data Source=C:BegASPNET11ch12Northwind.mdb"; //Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;User ID=guest;Initial Catalog=Volkswagen;Data Source=DEREKLAPTOP;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=DEREKLAPTOP;Use Encryption for Data=False;Tag with column collation when possible=False string strConnection = "Provider=SQLOLEDB.1"; strConnection += @"Data Source=C:Program FilesMicrosoft SQL ServerMSSQLDataorthwnd.mdf"; ////strConnection += @"Data Source=DEREKLAPTOP"; data_src.Text = strConnection; string strSQL = "SELECT FirstName, LastName FROM Employees"; DataSet objDataSet = new DataSet(); OleDbConnection objConnection = new OleDbConnection(strConnection); OleDbDataAdapter objAdapter = new OleDbDataAdapter(strSQL, objConnection); objAdapter.Fill(objDataSet, "Employees"); DataView objDataView = new DataView(objDataSet.Tables["Employees"]); dgNameList.DataSource=objDataView; dgNameList.DataBind();
Here is the error message I get in IE:
No error information available: REGDB_E_CLASSNOTREG(0x80040154). Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OleDb.OleDbException: No error information available: REGDB_E_CLASSNOTREG(0x80040154).
Source Error:
Line 18: OleDbDataAdapter objAdapter = new OleDbDataAdapter(strSQL, objConnection); Line 19: Line 20: objAdapter.Fill(objDataSet, "Employees"); Line 21: DataView objDataView = new DataView(objDataSet.Tables["Employees"]); Line 22: dgNameList.DataSource=objDataView; Source File: C:BegASPNET11ch12datagrid.aspx Line: 20
Stack Trace:
[OleDbException (0x80040154): No error information available: REGDB_E_CLASSNOTREG(0x80040154).]
Version Information: Microsoft .NET Framework Version:1.1.4322.2032; ASP.NET Version:1.1.4322.2032
I know that my problem is in the @DataSource part of the connection string. It works if I use the first two lines (the database file is in the same folder as the code). But not when I use it as above. I think I'm pointing to the wrong place, but I can't figure out the right place to point to. I have SQLServer running on my laptop (I think), so can anyone help me out or maybe give me some example connection strings that you have used? Thanks.
I have one computer running Visual Studio 2003, and another running SQL Server 2005. I am trying (unsuccessfully) to add a connection to a sqlDataAdapter from an application in the Visual Studio 2003 computer to the db on the SQL 2005 machine.
If I go to the machine running sql 2005, where I am running visual Studio 2005, I can create this connection with no problems.
Is there a way fromvisual Studio 2003 to create a sqlDataAdapter with a connection to SQL 2005?
We are new to SQL Server 2005 Express Edition. We are going to develope a solution for one of our client and we have to decide on which database to use for the solution. Client wanted to have a low cost solution. Thus we were not in a position to push them for SQL Sever 2000.
In the process, we also thought of having MySQL as one of the option. Another option we have is to use SQL Server 2005 Express Edition.
We wanted to know if SQL Server 2005 Express Edition can be used with Visual Studion 2003 (Ver 1.1) or it can only be used with Visual Studio 2005 (Ver 2.0)?
I was wondering if it is possible to connect the SQL Server 2005 Express Version to Visual Studio 2003.If its possible , how can it be done?Cos i seem to have an error if i do so.
We have a project already developed iusing VS 2003 Enterprise architect edition using sql server 2000(have lots of table and stored procs etc.) Now planning to switch to Sql server 2005 are there any issues associated with the switch.
I mean front end programming wise asp.net and vb.net front end codes do they work straight away or need to make any changes to all the front end codes, we are using datasets, data readers calling stored procs and also using lot of hash tables and XML object to make bulk loads to sql server via sqlxml3.0 sp3. Please help thank you very much for the information.
License requiredMaybe you don't have this but have one of the products thatqualifies for the upgrade such as ...Visual Studio .NET 2003 ProfessionalVisual Studio .NET 2003 Professional Special EditionVisual Studio .NET 2003 Enterprise ArchitectVisual Studio .NET 2003 Enterprise DeveloperVisual Studio .NET 2002 Professional EditionVisual Studio .NET 2002 Enterprise DeveloperVisual Studio .NET 2002 Enterprise ArchitectVisual Studio 97 Enterprise EditionVisual Studio 6.0 Professional EditionVisual Studio 6.0 Enterprise EditionVisual Basic 5.0 (or later) Professional EditionVisual Basic 5.0 (or later) Enterprise EditionVisual C++ 5.0 (or later) Professional EditionVisual C++ 5.0 (or later) Enterprise EditionVisual InterDev 1.0 (or later)Visual J++ Professional Edition 1.1 (or later)Visual FoxPro 5.0 (or later) Professional EditionVisual SourceSafe 5.0 (or later)Visio 2000 Enterprise Editionthat you are willing to part with for some cash.Dan Thomas
I am just starting to work with Visual Studio and SQL. I have Visual Studion 2003 with .net Framework 1.1. I want to download the SQL 2005 Express version and it requires the upgrade to .NET Framework 2.0
Will this affect my Visual Studio 2003? And can I use SQL 2005 with Visual Studio 2003?
I'm attempting to use RDA to synchronize a pocket pc emulator with SQL Server 2005 database by following tutorial http://msdn2.microsoft.com/en-us/library/aa454892.aspx, which uses AdvWorksMobile database that comes with SQL Server 2005.
When get to testing of "To test application features " ( step 4 of the merge replication setup lab ), I am receiving SQLCe Exception errors.
ORIGINALLY, I was able to deploy an application and view the local database on the emulator, but once I clicked "InitSinc" button, I received an error.
"Failure to connect to SQL Server with provided connection information. SQL Server does not" exist, access is denied because the SQL user is not a valid user on the SQL Server, or the password is incorrect. Found this error listed in Server Agent Errors log http://technet.microsoft.com/en-us/library/ms172357.aspx, but it wasn't very helpful since it doesn't provide any suggestions on fixing the problems.
I am brand new to SQL CE Server , mobile programming and .NET framework in general so please bare with me
All the connections / security settings, etc that were set up were taken from a tutorial so I am not sure what SQLCeServer is complaining about. Reading up on the error on the web didn't help, it all pointed to making sure that the snapshot folder had correct permissions set up. I verified that MACHINENAMEUISR_MACHINENAME guest user had Read rights to the database so I don't think that piece is the problem. Otherwise ,Merge publication has been setup in Microsoft SQL Server Management Studio by following the tutorial.
I am trying to run this sync on my home pc so there should be no issues with any user permissions
I have IIS installed
I did NOT have SQL Server Agent running in management studio at this time
I am trying to run this tutorial on an XP machine, which is my regular home PC so I dont think there are any special networking settings to consider
I am able to hit http://localhost/AdvWorksMobile/sqlcesa30.dll from my pc OK, but when I try to hit it from a cradled emulator ( after replacing "localhost" with "MACHINE_NAME" ), Internet Explorer on the emulator gives me a "Cannot Connect With Current Settings" error message. This part wasn't part of tutorial but decided so not sure if I am supposed to be able to hit it from my emulator..so I am not sure if the fact that I can't hit it is related to the problem. AFTER STARTING SQL SERVER AGENTin Microsoft SQL Server Management Studio, I killed the application, and after relaunching it, it hits "The Specified table does not exist [Vendor]" error. This time it doesn't even launch first - that is I dont even get to pressing "InitSinc" button. Debugger is showing that this error is hit on the following line in AdvWorksMobile.AddWorksDataSetTableAdapters
int returnValue = this.Adapter.Fill(dataTable);
I am not sure why the errors changed on me after starting SQL Server Agent. What can I do to fix this connection problem?
I am unable to debug code from a SQL Database Project using the CLR. After VS 2005 does the auto-attaching to the SQL server, VS hangs until I tell it to stop debugging. Many others have reported this as a similar problem, however this only seems to affect me when I€™m connecting to specific servers. Specifically it seems to be remote connections. When I attempt to connect to my SQL 2005 Developer Edition €œlocally€? I get right through and can debug. From my VS output window:
Auto-attach to process '[1688] [SQL] gx620-eric' on machine 'gx620-eric' succeeded.
Debugging script from project script file.
testing
No rows affected.
(0 row(s) returned)
Finished running sp_executesql.
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The program '[1688] [SQL] gx620-eric: gx620-eric' has exited with code 0 (0x0).
When I attempt to connect to a remote server running Enterprise Edition, it hangs after a successful attach.
Auto-attach to process '[1856] [SQL] virtual2003eric' on machine 'virtual2003eric' succeeded.
Sometimes after countless attempts, I am able to get this to work, but lately I have had no success. As far as the SQL Server side, enabling and disabling the CLR through the Surface Area Configuration seems to be the only place to do anything relative to the CLR inside SQL server.
I have firewalls disabled. All SQL Servers presently have both SQL 2005 SP2 and Visual Studio 2005 SP1 installed.
I€™ve tried restarting servers and services, checking and un-checking €œAllow SQL/CLR Debugging€? and those steps did not work for me.
Does anyone have any insight on this one? Any ideas on how I can further debug this one?
I have Visual Studio 2003 and had used it successfully with MSDE. I recently upgraded to SQL 2005 Express and cannot seem to connect to the SQL server. it appears in the list of servers on localhost, but when I try to create a new database it tells me that it "cannot create databases on this server." It will not even open up any existing databases.
I have .NET 2.0 installed. I uninstalled SQL and reinstalled it, but nothing seems to help. I feel I must be missing something, but do not know what.
I no longer have the MSDE installation files, so I hope I can get Studio to talk to SQL Express.
Hi I am following a project to build a small E-Commerce site from a book I have purchased and I have having problems connecting to the SQL Database with the code supplied. The book is Apress Beginning ASP.NET 1.1 E-Commerce http://www.amazon.co.uk/Beginning-ASP-Net-1-1-E-Commerce-Professional/dp/1590592549/ref=sr_11_1/202-7684451-7995058?ie=UTF8&qid=1193780707&sr=11-1 The code added to the Web.Config file is : <configuration> <appSettings> <add key="ConnectionString" value="Server=(local)NetSDK;Integrated Security=True;Initial Catalog=JokePoint" /> </appSettings>
The connection details are in a class file called Catalog.vb and is as follows Imports System.Data.SqlClientPublic Class Catalog Public Shared Function GetDepartments() As SqlDataReader 'Create the connection objectDim connection As New SqlConnection(connectionString) 'Create and initialize the command objectDim command As New SqlCommand("GetDepartments", connection) command.CommandType = CommandType.StoredProcedure 'Open the connection connection.Open() 'Return a SqlDataReader to the calling functionReturn command.ExecuteReader(CommandBehavior.CloseConnection) End Function Private Shared ReadOnly Property connectionString() As String GetReturn ConfigurationSettings.AppSettings("ConnectionString") End GetEnd Property End Class The error is..... Cannot open database "JokePoint" requested by the login. The login failed. Login failed for user 'MachineNameASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open database "JokePoint" requested by the login. The login failed. Login failed for user 'MachineNameASPNET'.Source Error:
Line 15: 'Open the connection Line 16: Line 17: connection.Open() Line 18: Line 19: 'Return a SqlDataReader to the calling function Source File: C:MyCommerceSiteJokePointBusinessObjectsCatalog.vb Line: 17 Stack Trace:
[SqlException: Cannot open database "JokePoint" requested by the login. The login failed. Login failed for user 'MachineNameASPNET'.] System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) System.Data.SqlClient.SqlConnection.Open() JokePoint.Catalog.GetDepartments() in C:MyCommerceSiteJokePointBusinessObjectsCatalog.vb:17 JokePoint.DepartmentsList.Page_Load(Object sender, EventArgs e) in C:MyCommerceSiteJokePointUserControlsDepartmentsList.ascx.vb:44 System.Web.UI.Control.OnLoad(EventArgs e) System.Web.UI.Control.LoadRecursive() System.Web.UI.Control.LoadRecursive() System.Web.UI.Control.LoadRecursive() System.Web.UI.Page.ProcessRequestMain()
The connection tests ok in Visual Studio 2003. All permissions are set using SQL Management Studio Express 2005. The book is using SQL 2000, I have been trying different connection syntax's in the Web.Config file all day and now I have a big headache. I know its something simple, can anyone please advise ? Thanks in advance.
Hello to everyone, I have this problem If I use this code when I try to update a record in my sql database It does not do anything. This is the code. Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim myconn As New SqlConnection("Data Source=.;Initial Catalog=SistemaIntegral; user id=sa") Dim mycmd As New SqlCommand("presup", myconn) mycmd.CommandType = CommandType.StoredProceduremycmd.parameters.Add(New SqlParameters("@txtClave", SqlDbtype.int,4)).Value=txtClave.textmycmd.parameters.Add(New SqlParameters("@txtForig", SqlDbtype.varchar,50)).Value=txtFOrig.textmycmd.parameters.Add(New SqlParameters("@txtFmod", SqlDbtype.varchar,50)).Value=txtFmod.textmycmd.parameters.Add(New SqlParameters("@txtFeje", SqlDbtype.varchar,50)).Value=txtFeje.textmycmd.parameters.Add(New SqlParameters("@txtPorig", SqlDbtype.varchar,50)).Value=txtPorig.textmycmd.parameters.Add(New SqlParameters("@txPmod", SqlDbtype.varchar,50)).Value=txtPmod.textmycmd.parameters.Add(New SqlParameters("@txtPeje", SqlDbtype.varchar,50)).Value=txtPeje.text mycmd.parameters.Add(New SqlParameters("@txtClave", SqlDbtype.int,4)).Value=txtClave.text myconn.Open() mycmd.ExecuteNonQuery() myconn.Close() mycmd.Dispose() myconn.Dispose() End Sub This is the code for the procedure called "presup" in SQL 2000 Server.CREATE PROCEDURE [presup](@txtClave [int],@txtForig [varchar](50),@txtFmod [varchar](50),@txtFeje [varchar](50),@txtPorig [varchar](50),@txtPmod [varchar](50),@txtPeje [varchar](50),@txtIdPresupuesto [int])as Update [Presupuesto]Set [IdClave]=@txtClave,[orig]=@txtForig,[moda]=@txtFmod,[ejer]=@txtFEje,[origr]=@txtPorig,[modar]=@txtPmod,[ejerr]=@txtPejeWhere ([IdPresupuesto]=@txtIdPresupuesto)GO When I click the Update button of my webform it does not do anything. Please Help me I am new to Visual Studio.Net 2003. (2 weeks ago I started using Visual Studio)
I'm still quite a beginner with the Report Designer and now I have faced a problem. My goal is to make a reports refresh each time it is loaded. I know that this can be done by using rs:clearsession = true-method but in order this to work, it should be added to each link. There are a lots of links in the reports we are using and therefore it would be more practical to find another way to refresh the report on page load. Is there any way to do this with some kind of code attached to each report? I'm using Visual Studio 2003 and my Reporting services 2000.
I'm not sure if it's the setup I did wrong, but I can't seem to get my text datatype in my database to store more than 900 characters. I'm trying to setup a news database for my website, which will populate the information into a datagrid. To test, I manually added a news item in the database through the visual studio 2003 gui. I immediately noticed a problem as the I was getting an error after a long news item saying:
"The value you entered is not consistent with the data type or length of the column, or over grid buffer limit."
I couldn't find anthing to set the buffer limit and the datatype is "text" filled with simple text in the column. As a further test, I simply entered 12334567890123... up to 900 characters and still recevied the error.
I would appreciate someone leading me in the right direction on this one.
I have a database in my "App_Data" folder of my visual studio project. I can view it fine in Visual Studio's built-in tools for managing a database attached to a solution. However i recently started playing around with the SQL Server Management Studio Express program. When i attach my database to Management Studio, and try to run my program it crashes. I think it might be a permissions error?!? When i detatch it and reattach it in visual studio it runs fine again. Any suggestions? ThanksJason
I recently installed the Evaluation Edition of SQL Server 2005 x64 and it appears that MS Visual Studio 2005 is installed in stead of SQL Server Business Intelligence Development Studio. When I choose new project the only template available is "Blank Solution". How do I get all the templates (i.e. Analysis Server Project, Integration Services Project, Report Model Project, Report Server Wizard project, etc.)?
Or would it be better to uninstall MS Visual Studio 2005 and attempt to reinstall BIDS?
I am new to visual studio and I am still not sure of all its components and features.
I installed visual studio 2005 standard edition but cannot find SQL Server Management Studio?
I guess this must be because it is not included with Visual studio 2005 standard. Is it included with VS 2005 professional?
I want to add pictures of products to my shopping site using an SQL database and I’ve been told that SQL Server Management studio is required as it is a graphical tool.
How would I go about obtaining the SQL server management studio. There seems to be different versions of SQL server that it is confusing to know which one to purchase.
Will the SQL server 2005 version that comes with Visual studio standard be sufficient for me now right? I want to create a shopping site with hundreds, perhaps even thousands of products. I want to use an SQL server 2005 database. The database will include ‘dynamically generated’ product images if that is the correct terminology.
My goodness, it seems I still have so much to learn.
How do i get the database that i am using in visual studio into my SQL server management studio? i need to create some scripts to create stored procedures on a live server.
I have SSRS in Visual Studio. I created a query that works fine in SQL Server Management Studio, but when pasted into Visual Studio I get the error "An expression of non-boolean type specified in a context where a condition is expected, near '('.
Here is the query. Can anyone help on why this isn't working? Thanks.
SELECT CASE WHEN MONTH(dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate) = MONTH(GETDATE()) AND YEAR(dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate) = YEAR(GETDATE()) THEN dbo.MAS_CCS_ARO_InvHistoryDetail.SOExtChargeAmount ELSE 0 END AS CurrentMonth, CASE WHEN SubString(dbo.MAS_CCS_GL_Account.Account,1,3) = '400' THEN 'ALEDO' ELSE ' ' END AS Location, dbo.MAS_CCS_ARN_InvHistoryHeader.SOTransDate, dbo.MAS_CCS_ARN_InvHistoryHeader.InvoiceNumber, dbo.MAS_CCS_AR1_CustomerMaster.CustomerName, dbo.MAS_CCS_ARO_InvHistoryDetail.DetailSeqNumber, dbo.MAS_CCS_ARO_InvHistoryDetail.LineType, dbo.MAS_CCS_GL_Account.Account, dbo.MAS_CCS_ARO_InvHistoryDetail.SOExtChargeAmount FROM dbo.MAS_CCS_AR1_CustomerMaster, dbo.MAS_CCS_ARN_InvHistoryHeader, dbo.MAS_CCS_ARO_InvHistoryDetail, dbo.MAS_CCS_GL_Account WHERE dbo.MAS_CCS_AR1_CustomerMaster.CustomerNumber = dbo.MAS_CCS_ARN_InvHistoryHeader.CustomerNumber AND dbo.MAS_CCS_ARN_InvHistoryHeader.InvoiceNumber = dbo.MAS_CCS_ARO_InvHistoryDetail.InvoiceNumber AND dbo.MAS_CCS_ARO_InvHistoryDetail.SOGLSalesAcct = dbo.MAS_CCS_GL_Account.AccountKey
I'm very confused. I installed Visual Studio 2005 and thought I understood that SQL Server 2005 came with it, but it appears that it's SQL Server 2005 - Express. Can anyone tell me what I need to do in order to get Data Transformation Services loaded or the equivalent of DTS in SQL Express?
Hi there, I am a newcomer to SQLExpress. I have installed Visual Studio 2005 and have been playing with it. Now I need to make a DB project with SQL server but I can not find a way to run the scripts (provided) to create the database I need.
Does anybody can help with this elementary question?
