Hi,
How can i return multiple resultsets from SQLServer. For ex, if we pass EmpNo to my storedprocedure it should return his salary details(from Sal table) and Attendance details(attendance table).
Ramesh
Hi!I want to return a derived table along with 4 simple tables in a storedprocedure as follows:Input parameter: @FtNum (==Order Number, selects one Order and allassociated data)Table 1: OrdersTable 2: ItemsTable 3: InstancesTable 4: StockDetailsDerived Table: for each Item that requires stock items, 1st columnshould receive the ItemNo (from Items), subsequent columns should receive thedetails from StockDetails via the common key field 'StockCode'.I have so far used a 'Fetch' cursor to find all occurrences of a StockCodewithin the Items table, but have been unable to figure out how to first addthe ItemNo into the temporary table.Code is as follows:... build #tmp_StockDECLARE stock_cursor CURSOR FORSELECT StockCode, ItemNoFROM ItemsWHERE FtNum = @FtNumORDER BY ItemNoOPEN stock_cursorFETCH NEXT FROM stock_cursorINTO @StockCode, @ItemNoWHILE @@FETCH_STATUS = 0BEGININSERT INTO #tmp_Stock-- wish to insert ItemNo = @ItemNo here --SELECT *FROM ControlledStockWHERE StockCode = @StockCodeFETCH NEXT FROM stock_cursorINTO @Stockcode, @ItemNoENDOf course there may be a much simpler way to do this!Your help would be greatly appreciated either way.--Message posted via SQLMonster.comhttp://www.sqlmonster.com/Uwe/Forum...eneral/200510/1
View 2 Replies View RelatedI have read a lot in favor and recommendation of returning multiple resultsets.
But now I have to implement it with a scenario.
I have a Parent Table named "Books" and a Child one named "Volumes".
A book can have multiple volumes.
Now I want to display the list of Books with their Volumes pagewise.
How can I implement that procdure.
Hi!
I have a question about SQL Reporting Services. I have a stored procedure which returns multiple resultsets (multiple select). In my reporting services project I have a dataset that connects to this procedure. But, when I execute it in the Data tab, I only get the first resultset. So can't I have more resultsets?
I can't use more datasets (that have the selects in the procedure) because the procedure is complicated and has many calculation. I've managed to get all the selects in only one and the reporting services in working in this way. How about many resultsets in a dataset?
Thank you!
Irina Stanca
I get the error above when I do the following.
Using VS 2008 I got a Windows Smart Device project targeting WM6 Standard and using .NET CF 3.5.
I add a new database file = creating an empty Compact 3.5 database (creates an sdf-file in my project).
Then create an empty dataset in the wizard (creates an xsd-file in my project).
Then I add a couple of tables in the database.
After that I want to use my earlier created dataset.
I mark the xsd-file and looks in Poperties.
I get the error when I try to change Custom Tool value from 'MSDataSetGenerator' to 'MSResultSetGenerator'.
Why????
Hi
I want to compare values of two fields in same resultset. Like I have resultset whrre there are two fields Frequency and New_Frequency I want to compare this two like if
Frequency = New_Frequency then do some logic.
I tried with derived columun using Frequency == New_NewFrequency but it doesn't work.
Let me know is there any way to compare?
Dnyandeo
Is there a problem mapping variables to resultsets with a bigint as datatype?
View 6 Replies View RelatedI have create stored procedure that returns 2 resultsets. When I configure OLE DB Source to use this procedure I can not add second output for he source. I get following error:
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [OLE DB Source [1]]: An output cannot be added to the outputs collection.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC020800F (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
How to add second output?
I dragged two tables into the dataset designer. And I have a query with a resultset over both of the tables (joined).Is there ANY way I can have a strongly typed datatable out of the resultset?The automatically created dataset adapters won't allow me to create a tableadapter or datatable for the joined resultset but for one single table at a time only.Any solution to that? Theoretically it should be possible since I don't "lose" any type information with a join.. why can't I have a strongly typed datatable over the resultset?The join is not very sophisticated. In fact it couldn't be any more simple.(I'm refering to my previously posted question at http://forums.asp.net/t/1220481.aspx)
View 4 Replies View RelatedHi there,
I'd need to generate multiple recordsets within a MS SQL stored procedure. The thing is these recordsets depend on each previous one (the first one obviously has parameters). How can I make this work? I can't create views with SPs. Thank you very, very much.
Martin
I have on stored procedure which returns mote than one resultset i want that to store in two different temp table how can achieve this in SQL server.
Following is the stored procedure and table that i need to create.
create procedure GetData as begin select * from Empselect * from Deptend
create table #tmp1 (Ddeptid int, deptname varchar(500),Location varchar(100))
Insert into #tmp1 (Ddeptid , deptname ,Location )
exec GetData
create table #tmp (empid int , ename varchar(500),DeptId int , salary int)
Insert into #tmp (empId,ename,deptId,salary)
exec GetData
I am trying to create a report using Reporting Services.
My problem right now is that the way the table is constructed, I am trying to pull 3 seperate values i.e. One is the number of Hours, One is the type of work, and the 3rd is the Grade, out of one column and place them in 3 seperate columns in the report.
I can currently get one value but how to get the information I need to be able to use in my reports.
So far what I've been working with SQL Reporting Services 2005 I love it and have made several reports, but this one has got me stumped.
Any help would be appreciated.
Thanks.
I might not have made my problem quite clear enough. My table has one column labeled value. The value in that table is linked through an ID field to another table where the ID's are broken down to one ID =Number of Hours, One ID = Grade and One ID= type of work.
What I'm trying to do is when using these ID's and seperate the value related to those ID's into 3 seperate columns in a query for using in Reporting Services to create the report
As you can see, I'm attempting to change the name of the same column 3 times to reflect the correct information and then link them all to the person, where one person might have several entries in the other fields.
As you can see I can change the names individually in queries and pull the information seperately, it's when roll them altogether is where I'm running into my problem
Thanks for the suggestions that were made, I apoligize for not making the problem clearer.
Here is a copy of what I'm attempting to accomplish. I didn't have it with me last night when posting.
--Pulls the Service Opportunity
SELECT cs.value AS "Service Opportunity"
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE ca.name = 'Service Opportunity'
--Pulls the Number of Hours
SELECT cs.value AS 'Number of Hours'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Num of Hours'
--Pulls the Person Grade Level
SELECT cs.value AS 'Grade'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Grade'
--Pulls the Person Number, First and Last Name and Grade Level
SELECT s.personnumber, s.lastname, s.firstname, cs.value as "Grade"
FROM student s
INNER JOIN cperson cs ON cs.personid = s.personid
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE cs.value =(SELECT cs.value AS 'Grade'
WHERE ca.attributeid = cs.attributeid AND ca.name='Grade')
Hi all!
I'm trying to get some XML data into SQL Server but i ran into problem when inserting the data (multiple orders with multiple order details) using a single sproc. Is it possible, or do I have to do in some other way? :confused:
I simplified my example to this:
-----------------------------
--CREATE PROCEDURE sp_InsertOrders AS
DECLARE @docHandle INT, @xmlDoc VARCHAR(4000), @orderID INT
--DROP TABLE #Orders
CREATE TABLE #Orders
(
OrderId SMALLINT IDENTITY(1,1),
FkCustomerID SMALLINT NOT NULL,
OrderDate DATETIME NOT NULL
)
--DROP TABLE #OrderDetails
CREATE TABLE #OrderDetails
(
OrderDetailsId SMALLINT IDENTITY(1,1),
FkOrderID SMALLINT NOT NULL,
ProductID SMALLINT NOT NULL,
UnitPrice SMALLINT NOT NULL
)
Set @xmlDoc = '
<Orders>
<Order CustomerID="1" OrderDate="2004-04-01">
<OrderDetails ProductID="6" UnitPrice="19"/>
<OrderDetails ProductID="3" UnitPrice="11"/>
<OrderDetails ProductID="9" UnitPrice="7"/>
</Order>
<Order CustomerID="2" OrderDate="2004-04-12">
<OrderDetails ProductID="2" UnitPrice="24"/>
<OrderDetails ProductID="4" UnitPrice="13"/>
</Order>
</Orders>'
EXEC sp_xml_preparedocument @docHandle OUTPUT, @xmlDoc
INSERT INTO #Orders (FkCustomerID, OrderDate)
SELECT CustomerID, OrderDate
FROM OpenXML(@docHandle, 'Orders/Order', 3)
WITH (
CustomerID INTEGER,
OrderDate DATETIME
)
SET @OrderID = @@IDENTITY;
--INSERT INTO #OrderDetails (@OrderID, ProductID, UnitPrice)
SELECT @OrderID AS OrderID, ProductID, UnitPrice
FROM OpenXML(@docHandle, 'Orders/Order/OrderDetails', 3)
WITH (
ProductID INTEGER,
UnitPrice INTEGER
)
-----------------------------
All orders are inserted first which makes the use of @@IDENTITY incorrect (it works fine if you insert a single order with multiple order details). Since it was quite some time since I last worked with SQL I am not sure if am doing it the right way... :confused: :confused: Anybody out there who knows how to solve the problem?
Cheers,
Christian
I concatenate multiple rows from one table in multiple columns like this:
--Create Table
CREATE TABLE [Person].[Person_1](
[BusinessEntityID] [int] NOT NULL,
[PersonType] [nchar](2) NOT NULL,
[FirstName] [varchar](100) NOT NULL,
CONSTRAINT [PK_Person_BusinessEntityID_1] PRIMARY KEY CLUSTERED
[Code] ....
This works very well, but I want to concatenate more rows with different [PersonType]-Values in different columns and I don't like the overhead, of using the same table in every subquery ([Person_1]). Is there a more elegant way to do this, without using a temp table or something else?
I need to update multiple columns in a table with multiple condition.
For example, this is my Query
update Table1
set weight= d.weight,
stateweight=d.stateweight,
overallweight=d.overallweight
from
(select * from table2)d
where table1.state=d.state and
table1.month=d.month and
table1.year=d.year
If table matches all the three column (State,month,year), it should update only weight column and if it matches(state ,year) it should update only the stateweight column and if it matches(year) it should update only the overallweight column
I can't write an update query for each condition separately because its a huge select
I have the following results:
ID, Office1
1, Testing
1, Hello World
What i am trying to do is to get this result:
ID, Office1, Office2
1, Testing, Hello World
how i can accomplish this task.
Hi,
I think this is a question for the specialists among us.
Can I use one general reporting server (installed on instance MAINREPORTING)
for multiple customers who all have their own sql instance (CUST1, CUST2, CUST3, ..)
I would use UserAuthenciation on the reportserver url to display the specific reports customers can use.
Is this possible, and what do i have to take care off concerning installation and/or configuration (especially on
the reporting side) ?
Greetings
Vinnie
We are consolidating some old SQL server-environments from 'OLD' to 'NEW' and one of our vendors is protesting on behalve of the collation we use on our 'NEW' SQL server.
Our old server (SQL 2005) contains databases with collation SQL_Latin1_General_CP1_CI_AS
Our new server (2014) has the standard collation Latin1_General_CI_AS
Both collations have CI and AS
From experience I know different databases can reside next to eachother on the same Instance.
The only problem could be ('could be !!') the use of TempDB with a high volume of transaction to be executured in TempDB and choosing for Snapshot Isolation Level ....
The application the databases belong to is very static, hardly updated, and questioned only several time per hour (so no TempDB issue I guess).
using different databases using a different collation running on the same instance?
i want to run a transaction across mulitpule instances of sqlserver with out linked server.distributed trnasaction can do it with link server , can it do it with out linked server.
View 4 Replies View RelatedHi!
I just used the SSIS Import and Export Wizard to copy 50+ tables from SS05 to SS2K.
I found that the wizard created a package that I could not figure out how to edit, e.g., to change whether or not it had to CREATE a table, or just use an existing one. (I created some problems by manually editing the receiving table names to be ones that already existed -- but the original names it had did not exist, so it knew it had to create them. What I should have done, and eventually ended up doing, was scroll through my list of tables in the "receiving" box; I just figured editing the name would be faster, not realizing what problems I would create for myself.)
Anyhow, now that I see the complex package that the wizard creates, with a LOOP over the 50+ tables, I would like to know how/where in the package it is storing the information about the tables to copy.
Basically the wizard creates the following Control Flow tab entries (in processing sequence order):
an Execute SQL Task: NonTransactableSql
an Execute SQL Task: START TRANSACTION
a Sequence Container: Transaction Scoping Sequence, which contains
an Execute SQL Task: AllowedToFailPrologueSql
an Execute SQL Task: PrologueSql
a Foreach Loop Container, which contains
a Transfer Task with an icon I did not notice in the Toolbox
an Execute Package Task: Execute Inner Package
an Execute SQL Task: EpilogueSql
an "on success" arrow to
an Execute SQL Task: COMMIT TRANSACTION
an Execute SQL Task: PostTransaction Sql
an "on failure" arrow to
an Execute SQL Task: ROLLBACK TRANSACTION
an Execute SQL Task: CompensatingSql
Where, and how, can I look within this package to see the details about the tables I am transferring? I see that one of the Connection Managers is "TableSchema.XML" -- but it points to a temporary file on my hard drive, that I presume is populated by the package. Where does it get its information?
This is certainly much more complex than the package I would have written, based on my limited knowledge of SSIS. I would have been inclined to create 50+ Data Flow tasks, one for each table.
So now I'm trying to understand why the Wizard created this more-complex package.
Any help will be appreciated, including references to non-Microsoft books/websites/etc.
Thanks in advance.
Dan
I am playing around in a test environment with SQL Server 2014. I have a question about the default location of the report server databases when you have multiple report server instances installed on one server.
I did a very simple install of SQL Server 2014 with the database and Reporting Services in Native Mode (install only) features selected. Accepting the default locations, I ended up with the following locations as you would expect:
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVER
C:Program FilesMicrosoft SQL ServerMSRS12.MSSQLSERVER
Running the Reporting Services Configuration Manager, I created the Report Server database. After creating the Report Server database, the related files will be located below in the SQL folder as I would expect.
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVERMSSQLDATA
Next I installed another instance, which I called Test, of SQL Server 2014 like I did above. I now have the following folder structure the Test instance as I expect.
C:Program FilesMicrosoft SQL ServerMSSQL12.TEST
C:Program FilesMicrosoft SQL ServerMSRS12.TEST
Running the Reporting Services Configuration Manager, I select the Test instance and create the Report Server Test instance database.
My first thought would be that the Test instance Report Server database would be in the following location:
C:Program FilesMicrosoft SQL ServerMSSQL12.TESTMSSQLDATA
Instead this database is located with the default instance Report Server database:
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVERMSSQLDATA
Hi,
I have two servers S1,S2.
I am currently connect to S1 but I want to Query a table from S2 without creating a linked server.
Is it possible.Can someone please post some information on how this can be accomplished.
ETL, Lookup ,Stored procedure anything is ok. I am using SQL Server 2005.This is a very urgent requirement.
Please help!
Thanks,
Here is my requirement, How to handle using SSIS.
My flatfile will have multiple columns like :
ID key1 key2 key3 key 4
I have SP which accept 3 parameters ID, Key, Date
NOTE: Key is the coulm name from the Excel. So my sp call look like
sp_insert ID, Key1, date
sp_insert ID, Key2,date
sp_insert ID, Key3,date
I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car
where Price=@Price1 or Price=@price2 or Price=@price=3
and
where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3
and
where Model=@Model1 or Model=@Model2 or Model=@Model3
and
where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
I have a table with single row like below
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Column0 | Column1 | Column2 | Column3 | Column4|
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Value0 | Value1 | Value2 | Value3 | Value4 |
Am looking for a query to convert above table data to multiple rows having column name and its value in each row as shown below
_ _ _ _ _ _ _ _
Column0 | Value0
_ _ _ _ _ _ _ _
Column1 | Value1
_ _ _ _ _ _ _ _
Column2 | Value2
_ _ _ _ _ _ _ _
Column3 | Value3
_ _ _ _ _ _ _ _
Column4 | Value4
_ _ _ _ _ _ _ _
I have a requirement where in i have around 15 different flat files , filenames are fixed but folder path can be changed(i think i should use a variable for folder path). These 15 files data should go to their respective tables in the database.
Whether I need to create separate data flow task for each file or separate package? In addition to these, example : while importing product data into product table, if product ID already exists, we need to ignore it and upload only the new records.
I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.
View 3 Replies View RelatedI have an excel file that has multiple sheets and I need to import data from each separate sheet to a separate table using SSIS.
E.g. Sheet A data should go to Table A and Sheet B data should go to Table B and so on. Is it possible to do this with out using script task.
I'm trying to create an email report which gives a result of multiple results from multiple databases in a table format bt I'm trying to find out if there is a simple format I can use.Here is what I've done so far but I'm having troble getting into html and also with the database column:
EXEC msdb.dbo.sp_send_dbmail
@subject
= 'Job Summary',
@profile_name =
'SQL SMTP',
[code]....
Hi,
I'm trying to create a database that takes specific information from a number of databases on different servers to make some reporting that we have much easier.
I'm pretty new to SQL so I'm not sure of the best way to proceed. I read an article that suggested I use the OPENROWSET command. The problem is, the version of SQL that came with one of the programmes we use is limited and will not allow you to turn on the allow "Ad Hoc distributed Queries" so the SLQ statement will not execute.
I'm confused why it won't let me to connect through ODBC as I've created a web page that selects data from this database with no problems!
Here is the SQL statement that I've written to make sure it is the correct one (on the msdn library page it said that this was the ODBC connection):
SELECT a.*
FROM OPENROWSET('MSDASQL','DRIVER=(SQL Server);SERVER=APPOLOACT7;UID=sa;PWD=***************',
'SELECT * FROM MDCTestAndDev.dbo.TBL_CONTACT') AS a
I've also created the ODBC connection using the tool on Administration Tools>Data Sources ODBC
Any help would be greatly appreciated (also any ways of selecting from one database and inserting it into another will be helpfull)
Thanks
Hello All,
After hitting limitations in the SQL CLR world that bar us from invoking COM objects we are forced to use windows services to read the messages off the Service Broker Queues.
Unfortunately we loose the auto activation feature in the Queues, but we can still read messages and perform the SQL work under one transaction.
We are going to attempt to take N messages simultaneously from the Queue, though N instances of a windows service. If the messages send to the queue are one message per conversation, will we be able to achieve having N readers take messages off simultaneounsly?
Thank you very much,
Lubomir
P.S. if anyone has a better approach to obtaining the message in "out of sql code" or invoking external (not assemblies stores in SQL server) code libraries, that would be etremely nice to hear. I have thought about invoking a web service through CLR, but that is probably too much overhead - MSMQ seems much more appealing than a web service;
I have just taken over the job of sorting out a rather poorly designed database. It looks like it was 'upsized' from an access database to the SQL server. The SQL server is the 2000 version.
Now I am trying to generate a report of what the students in the database are owing by referencing the Receipt table and then all the available payment methods and allocations. I was wondering if there was anyway to work out data being displayed twice (Let me demonstrate)
Note1: All the tables are linked by a key of ReceiptNo. From what I can see there is a table for every payment type and allocation but no link between the two other then the receipt number.
Using the query:
SELECT T_Receipt.ReceiptNo, T_cheque.Amount AS Chq_Amount, T_credit.Amount AS Cre_Amount, StandingOrder.Amount AS Stn_Amount,
T_BankTransfer.amount AS Bnk_Amount, T_cash.TotalAmount AS Cas_Amount, T_RentPayment.AmountPayed AS Ren_Paid,
T_AdminPayment.AmountPaid AS Adm_Paid, T_InternetBilling.Total AS Int_Paid, T_Utilities.AmountPaid AS Util_Amount,
T_InvoicePayment.amountPaid AS Inv_Paid, T_OtherPayments.paymentAmount AS Oth_Paid, T_parkingBill.paymentAmount AS Prk_Paid,
T_TelephoneBills.TelephoneCredit AS Tel_Paid, T_DepositPayment.[Deposit payment] AS Dep_Amount, T_Receipt.cancelled AS Canceled,
T_Receipt.RemittanceReceiptNo AS Rec_Ref, T_Receipt.Student
FROM T_Receipt INNER JOIN
T_DepositPayment ON T_Receipt.ReceiptNo = T_DepositPayment.receiptNo LEFT OUTER JOIN
T_RentPayment ON T_Receipt.ReceiptNo = T_RentPayment.RentPaymentNo LEFT OUTER JOIN
StandingOrder ON T_Receipt.ReceiptNo = StandingOrder.ReceiptNo LEFT OUTER JOIN
T_TelephoneBills ON T_Receipt.ReceiptNo = T_TelephoneBills.ReceiptNo LEFT OUTER JOIN
T_parkingBill ON T_Receipt.ReceiptNo = T_parkingBill.ReceiptNo LEFT OUTER JOIN
T_OtherPayments ON T_Receipt.ReceiptNo = T_OtherPayments.ReceiptNo LEFT OUTER JOIN
T_InvoicePayment ON T_Receipt.ReceiptNo = T_InvoicePayment.receiptNo LEFT OUTER JOIN
T_cash ON T_Receipt.ReceiptNo = T_cash.ReceiptNo LEFT OUTER JOIN
T_AdminPayment ON T_Receipt.ReceiptNo = T_AdminPayment.ReceiptNo LEFT OUTER JOIN
T_BankTransfer ON T_Receipt.ReceiptNo = T_BankTransfer.receiptNo LEFT OUTER JOIN
T_Utilities ON T_Receipt.ReceiptNo = T_Utilities.receiptNo LEFT OUTER JOIN
T_credit ON T_Receipt.ReceiptNo = T_credit.ReceiptNo LEFT OUTER JOIN
T_cheque ON T_Receipt.ReceiptNo = T_cheque.ReceiptNo LEFT OUTER JOIN
T_InternetBilling ON T_Receipt.ReceiptNo = T_InternetBilling.ReceiptNo
GROUP BY T_Receipt.Student, T_Receipt.ReceiptNo, T_cheque.Amount, T_credit.Amount, StandingOrder.Amount, T_BankTransfer.amount, T_cash.TotalAmount,
T_AdminPayment.AmountPaid, T_InternetBilling.Total, T_Utilities.AmountPaid, T_InvoicePayment.amountPaid, T_OtherPayments.paymentAmount,
T_parkingBill.paymentAmount, T_TelephoneBills.TelephoneCredit, T_Receipt.cancelled, T_Receipt.RemittanceReceiptNo,
T_DepositPayment.[Deposit payment], T_RentPayment.AmountPayed, T_Receipt.Student
HAVING (T_Receipt.Student LIKE N'06%')
Which gives a result of:
RecNo.
30429
Cheque
250
Deposit
250
30429
679.98
250
This is fine but when I do analysis on this it appears as though the student has paid two deposit payments. I was wondering with out querying each table independently from an application if there was a criteria to specify that I only get one deposit result.
So as such say, give me all the payments but I only want one result from the other tables. I though about discrete but that wouldn't work here.