SQL Server Not Starting - Tempdb Path Updated To Wrong Path
Oct 4, 2007After updating TempDB path to a wrong path (without file name only folder name) the service is not starting. How can i sovle this and start the service
thanks
Leena
ADVERTISEMENT
Tempdb Path
Jan 3, 2000Hi,
Can we change the Path of the Tempdb.(i.e., In Tempdb's properties location).
thanks in advance.
bye,
Madhu.
Subject: BCM Install Error - Logfile && SQL Path Path && MSSQL.1?
Apr 16, 2008When trying to install Business Contact Manager (BCM) for Outlook 2007, the setup failed and I was refered to a log file in my Local Settings/Temp folder. The log actually says that Business Contact Manager was installed sucessfully! BCM is supposed to install SQL Express 2005 as an instance or as instance if SQL Express is already installed. There is an MSSMLBIZ instance in Services..
Who can I send the Log File to for analysis and the fix feedback?
When I first went into Computer Management and clicked on Services and Applications in the left panel, the error message appeared "Snap-in failed to intialize. Name: SQL Server Configuration Manager CLSID:{CA9F8727-31DF-41D2-975C-887D84903967} This message diappeared when I clicked on Services and Applications again. Under Services, there are 3 SQL services - one is an application that was uninstalled 3-4 weeks ago and I disabled this service. The other 2 are: SQL Server (MSSMLBIZ) and the other one is SQL Server (SQLEXPRESS) When I tried to start either of the last 2, the message appeared: Services "Could not start the SQL Server (MSSMLBIZ) service on Local Computer. Error 3: The system cannot find the path specified. Under Program Files/Microsoft SQL Server/MSSGL.1 folder is mostly empty. So, it seems like the Path in the Registry is not valid and that nothing is being installed in the MSSQL.1 folder. If so, how do I fix this?
How do I get the BCM SQL instance to install and run properly? what do the messages in Services mean and how do I resolve these.
Thank you!
Gary
SQL 2012 :: Log Shipping - Secondary Database Path Showing Wrong Location?
Mar 17, 2014I've configured log shipping to use for DR purposes. I'm concerned that the physical location of the secondary is mis-reported by SQL Server Management Studio.
Viewing the secondary location (with Studio DB_name Properties Files) shows the path of the primary DB (I expected it to show the path of the secondary).
This SQL command shows the correct/actual paths of both primary and secondary DB's when run on their host servers.
SELECT name, physical_name AS CurrentLocation, state_desc FROM sys.master_files
Is this just cosmetic?
Here is an Example of how the Studio shows the incorrect path for the secondary.
Example:
(Primary) servername=prodSrv, DBname=aquaDB, Actual_Path=G:aquaDB, SQL-studio-Properties-Path=G:AquaDB, sys.master_files Path=G:AquaDB,
Log shipped to
(Secondary / Read Only) servername=DRSrv, DBname=aquaDB, Actual Path=F:aquaDR, SQL-studio-Properties-Path=G:AquaDB(WRONG), sys.master_files Path=F:aquaDR
Config File Path Not Being Updated In The Dtsx File While Deployment
Sep 21, 2006Hello All,
I experienced a weird error while deploying my SSIS package. After running the manifest file, i noticed that one of the configuration file's path was not updated in the dtsx file. My solution has 8 packages and almost every package has 2 configuration files. Except 1 file every other config file's path is being updated. Has anybody experieced such a problem?
Thank you in advance for your help
Sumesh
Path When Restoring Db From SQL Server
Jan 2, 2008When I restore db from backup on another server, it always remebers the source db path. This is very annoying as drive mappings are different. I have to go and manually change those paths each time to point to the existing mdf... Is there any way so I do not have to do this???
View 3 Replies View RelatedPhysical Path Of Sql Server Log
May 30, 2008hi
where is save the folder of sql server logs ,error logs in sql server 2005
Linked Server To Excel With UNC Path
Apr 5, 2006We have been having problems getting a linked server to an excel file
working with an UNC path. If the UNC path is to the SQL server itself
it will work but not if the UNC path is to another server.
The SQL server 2000 SP 4 processes are running under a domain id and we
can logon interactively with that same login id and we can access the
excel file via the same UNC path.
We have tried it with setting up a linked server and also linking to it
'on the fly':
SELECT *
FROM OpenDataSource( 'Microsoft.Jet.OLEDB.4.0',
'Data Source="\AnotherServerUNCpathexcel.xls";User
ID=Admin;Password=;Extended properties=Excel 5.0')...sheet1$
go
The message we are getting is the following:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. The
provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0'
IDBInitialize::Initialize returned 0x80004005: The provider did not
give any information about the error.].
It appears from reading Microsoft's documentation and other topics that
this should be possible. Any ideas on what we are missing?
SQL Server 2012 :: Nested FOR XML Path
Oct 16, 2014I'm trying to reverse engineer an XML output based on a client's need of a very specific format. Besides the issue of getting the XML declaration written in and removing NULLs, I'm having an issue with a three times nested PATH query.
So far the document almost has the correct format, except for the first nested root being returned. Is there any way to prevent this?
*some data redacted
Query:
DECLARE @a XML
SET @a =
(SELECT FileCreationDate,
(
SELECT PCE_TPD.PJN,
(
SELECT top (2) TaskCode, TaskName, RSI, TAFFD, AFD, Notes, PID, CUSID, NeedToBeNA
[Code] ....
Current Output (first few lines):
<TDBUIData xmlns="http://www.xxxxx">
<TDBUIData12 xmlns=""> --NEED TO ELIMINATE THIS
<FileCreationDate>2014-10-15T23:23:00</FileCreationDate>
<TDBUIDL>
<PJN>MRWSH010824</PJN>
[Code] ...
Desired Output (first few lines):
<TDBUIData xmlns="http://www.xxxxx">
<FileCreationDate>2014-10-15T23:23:00</FileCreationDate>
<TDBUIDL>
<PJN>MRWSH010824</PJN>
<TaskData>
[Code] ...
SQL Server 2008 :: Extract Name From UNC Path
Feb 4, 2015Running into some difficulty trying to extract a name from a UNC Path. The structure of the UNC Path is this:
server1-1shareusername hispartgoesonandon
I'm needing to extract "username" into a separate column.
Get SQL Server Express Installation Path
Mar 26, 2008Hi, i would like to know if there's a way to know the path where my sql server is located, i need to know this because i've an application (VB .NET) that needs to know this path, any help?
View 1 Replies View RelatedRecursive Complete Path On SQL SERVER 2005 ???
Apr 18, 2008Dear,
I'm having this table:
PathIDParentPathIDPath
1 NULL D:
2 1 Sections
3 2 Bin
4 3 Data
5 4 FinancialReport.doc
6 4 DebtReport.doc
7 3 db.dll
I would like to create a store procedures that will return me a full path by passing a PathID
I started with this code:
DECLARE @path_id int
SET @path_id = 5;
WITH fullPath (PathID, ParentPathID, Path)
AS
(
SELECT PathID, ParentPathID, Path
FROM tblPath WHERE PathID = @path_id
UNION ALL
SELECT tblPath.PathID, tblPath.ParentPathID, tblPath.Path AS Path
FROM tblPath
JOIN fullPath ON tblPath.PathID = fullPath.ParentPathID
)
SELECT * FROM fullPath
This code will return this:
1 NULL D:
2 1 Sections
3 2 Bin
4 3 Data
5 4 FinancialReport.doc
What I would like to get is something like this:
D:/Sections/Bin/Data/FinancialReport.doc
Any help would be really appreciated. Lost too much time on it already.
Thanks,
pharvey
SQL Server 2008 :: How To Check A Path Existing
Apr 29, 2015whenever I use the below script, it throws the below error.
declare @DbFilePath VARCHAR(max)
set @DbFilePath = ' c:mdndndmmnsn'
if object_id('tempdb.dbo.#fileExist') is not null
drop table #fileExist
[Code] ....
Msg 0, Level 11, State 0, Line 0 A severe error occurred on the current command. The results, if any, should be discarded.
Server 2008 Instance Path Change
Jul 3, 2015Currently we have SQL instance on C: drive.We are now going to upgrade SQL Server 2008 RTM to SQL 2008 SP4.Can we change the path of SQL instance during upgrade?What services need to be stopped during upgrade.
View 2 Replies View RelatedSQL Server 2012 :: Encoding With Single Apostrophes In FOR XML PATH
Oct 16, 2014Here is my problem:-
declare @test as varchar(32)
declare @test2 as varchar(32)
set @test='today''s problem'
set @test2='my <string> '
select @test as '@attribute' for xml path ('myrow')
select @test2 as '@attribute' for xml path ('myrow')
I want for xml path to correctly encode the single apostrophe as &apos but the single apostrophe doesn't get encoded. In the second example the greater and less than does get encoded.
SQL Server 2012 :: Compare A Table With Physical Path
Mar 31, 2015I have a table with two columns
id | filepath
--------------------------------------------------
1| D:Doc filesThe BestHHT.JPG
2| D:Doc filesThe Bestsealed_pack.txt
3| D:Doc filesThe Bestlsbom.JPG
4| D:Doc filesThe Bestmoc.png
5| D:Doc filesThe Beststock.txt
6| D:Doc filesThe Bestdepot.JPG
And in a physical system there are more files than the table.
D:Doc filesThe BestHHT.JPG
D:Doc filesThe Bestsealed_pack.txt
D:Doc filesThe BestJKSlsbom.JPG
D:Doc filesThe Bestmoc.png
D:Doc filesThe Beststock.txt
D:Doc filesThe BestGDNdepot.JPG
D:Doc filesThe BestCASA.JPG
D:Doc filesThe BestSO.txt
D:Doc filesThe BestBA.JPG
I want to compare the filepath column in table with physical drive files and get the details of files which in table and not in physical and viceversa...
Photos In SQL Server: Store As Images Or Strings With Path && Filename?
Apr 4, 2008Hi, for my photo album database I'm trying to decide whether to store the actual photos as images in the db or whether to leave them in file directories with just the path & filename in the db. As a beginner in this field I don't know how either of these options compare (e.g. in terms of performance, complexity, flexibility and maintainablity) so any advice on the pros and cons of each would be appreciated.
View 5 Replies View RelatedSQL Server Admin 2014 :: Restoring Database From Network Path
Sep 23, 2014While doing the restore of the database is it better to copy the backup file locally and restore or restore from the network path is good option?
What kind of the problems we may get restoring the backup from the network path?
ClickOnce Path Names Are Too Long For SQL Server Express Identifiers
May 11, 2006I'm posting this in the ClickOnce forums as well...
My application doesn't include the .mdf and .ldf files, rather it creates the database the first time the application is run using a script that is included in the build. I want to create the database in the ClickOnce data directory. The problem I'm having is that SQL Server complains when I execute the CREATE DATABASE command as follows:
CREATE DATABASE [C:Documents and SettingsxxxxxLocal SettingsApps2.0DataPQCK6EXN.5KGAW630RPT.VGOifie..tion_014028c05b1d6ec6_0001.0002_0e86966f19503c89DataiFieldMobile.mdf] ON PRIMARY
( NAME = N'myDatabase', FILENAME = N'C:Documents and SettingsxxxxxxLocal SettingsApps2.0DataPQCK6EXN.5KGAW630RPT.VGOifie..tion_014028c05b1d6ec6_0001.0002_0e86966f19503c89DatamyDatabase.mdf' , SIZE = 3136KB , MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB )
LOG ON
( NAME = N'myDatabase_log', FILENAME = N'C:Documents and SettingsxxxxLocal SettingsApps2.0DataPQCK6EXN.5KGAW630RPT.VGOifie..tion_014028c05b1d6ec6_0001.0002_0e86966f19503c89DatamyDatabase_log.ldf' , SIZE = 1024KB , MAXSIZE = 2048GB , FILEGROWTH = 10%)
END
Here's the error:
System.Data.SqlClient.SqlException "The identifier that starts with 'C:Documents and SettingsxxxxxxLocal SettingsApps2.0DataPQCK6EXN.5KGAW630RPT.VGOifie..tion_014028c05b1d6ec6_0001.00' is too long. Maximum length is 128."
How To Change The Data Path Specified In The SQL Server (MSSQLSERVER) Service Properties?
Apr 18, 2007I have connected to the SQL Server 2005 instance usign the SQL Server Management Studio; I have changed the default locations for the database and log files. I have also rebooted the machine. When I look in the SQL Server Configuration Manager in the properties for the SQL Server (MSSQLSERVER) I see that the data path is still set to the old value and this field is read-only. How can this can changed without going through the registry?
View 10 Replies View RelatedSQL Server 2012 :: Bulk Insert Using UNC Path Of File Table Directory
Jul 22, 2013Overall goal: Write a Bulk Insert statement using the UNC path of a filetable directory.
Issue: When using the UNC path of the filetable directory in a Bulk Insert Statement, receiving "Operating system error code 50(The request is not supported.)" Looking for confirmation as to whether this is truly not supported.
Environment: SQL Server 2012 Standard. Windows Server 2008 R2 Standard
SQL Server 2012 :: Using Recursive Query To Find Path Between Assembly And Parts?
Jul 2, 2014I'm trying to use a recursive query to find path between assembly and parts.
The BOM is similar to(I've limited the number of rows and lines):
BOM NumberMat Number
20000222001770
20000222003496
20000222001527
20000222003495
20002462002005
20005062000246
[code]....
How should I modify it so that is returns the 4 path?
SQL Server 2008 :: Count Number Of Files Deleted From Share Path?
Apr 23, 2015SET NOCOUNT ON
Declare @daysOld int,@deletedate nvarchar(19) ,@strDir varchar(250)
declare @cmd11 nvarchar(2000)
declare @mainBackupDir varchar(2000),
@result1 nvarchar(max);
[Code] ....
SQL Server 2008 :: Unable To Create Folder If Present Already In A Share Path
Jun 1, 2015I'm, using my script to many location to create folder to save output files and if the folder is removed/not present it can create it without any noise. But the problem is, while I use the same sort of script to check if a folder is present in the sharedpath it will not create it to copy all bkp files from local to remote path works good, but if you delete the folder or rename the exisitng folder and if the below script tries to create the folder it created as "fILE", very interesting. Per IT team they have given SQL Server account the full rights to create/delete/alter folder/files.
Do I need to use seperate script or way to create / alter folders in the sharepath?
SET NOCOUNT ON
Declare @len INT, @i INT, @Left varchar(max), @right varchar(max), @SERVERNAME sysname,@finalServer sysname
declare @rc int, @dir nvarchar(4000)
DECLARE @cmd1 sysname, @cmd2 sysname, @cmd sysname;
Declare @extPAth varchar(max)
[Code] ....
SQL Server 2008 :: Checking Files In A Shared Path If Folder Or File?
Jun 3, 2015I wrote the below script to print all folders and files located in the share path. How to extend my script to mention by adding another column whether the file is a folder/file , sort of 0 or 1.
declare @chkdirectory1 varchar(4000) = 'shared_pathfolder';
declare @finalserver3 varchar(4000);
create table #tmp (directory_name varchar(4000))
SET @finalserver3 = '''"DIR ' + @chkdirectory1 + ' /B"''';
--select @finalserver3
--SELECT @finalServer
DECLARE @ExecCmd varchar(100)
--SELECT @ExecCmd = 'EXEC master.dbo.xp_cmdshell ' + char(50) + 'mkdir D:'+ CONVERT(varchar(8), getdate(), 112) + '' + char(50)
SET @ExecCmd = 'EXEC master.dbo.xp_cmdshell ' + @finalserver3
--SELECT @ExecCmd
exec(@ExecCmd)
drop table #tmp
SQL Server Admin 2014 :: Check If UNC Path Exists (It Is Folder - Not File)
Oct 29, 2015usual way to check if file exists
DECLARE @File_Exists INT
EXEC Master.dbo.xp_fileexist 'serverBSQL_Backupfile.bak', @File_Exists OUT
print @File_Exists
1
And if check folder, can use "nul", but it doesn't work for UNC path
DECLARE @File_Exists INT
EXEC Master.dbo.xp_fileexist 'serverBSQL_Backupul', @File_Exists OUT
print @File_Exists
0
If use xp_subdirs like:
EXEC master.dbo.xp_subdirs 'serverBSQL_Backups'
If the folder doesn't exists, Msg 22006, Level 16, State 1, Line 3 xp_subdirs could not access 'ServerBSQL_Backups*.*': FindFirstFile() returned error 67, 'The network name cannot be found.'
how to check if UNC folder exists in Backup? in my code I want to check if the unc folder exists before doing backup, the unc path is retrieved from other table or backup history.
Back && Restore From Network Path Using SQL Server 2005 Express Edition
May 27, 2008
I am trying to restore database from network drive but
sql server 2005 express is giving error
"system.data.sqlclient.sqlErroratabase <dbname> cannot be opened due to inaccessible files
or insufficient memory or disk space (microsoft.sqlserver.express.smo)."
But when I restore database from "C:" or local drive it alows to do so.
Can anyone help.
SQL Server 2012 :: View To Concatenate File / Path Names Back To Root Directory?
Sep 25, 2014We have a hierarchical table of some 2-3k of rows that grows slowly at only 3-5 rows a month, and is never likely to be above 5k, holding file/directory names with an IdParent int value pointing at that items immediate parent or NULL if root
Below is a sample:
Id Name IdParent
1 C: NULL
2 D: NULL
3 ProgramFiles 1
4 DataFiles 2
5 Excel.EXE 3
6 MyDataList.CSV 4
iterative code required to achieve the result I am looking for is best handled in the Application layer, but in this case the design brief is that we must get our results back as a View. Speed of execution and code clarity are secondary 'icing on the cake' issues.
I have tried recursive CTE's and XML FOR solutions but without success, and while I feel the latter is probably the best all rounder the searches I have made and the examples I have read do not seem to solve this particular issue.
Even to find the starting point of the search tree (i.e. the .EXE and the .CSV items) was difficult because the final slash is optional in some of the rows (.e. row 4)
The end result of my view on the above data should return:
Id FilePath
5 C:ProgramFilesExcel.EXE
6 D:DataFilesMyDataList.CSV (note the adding of the missing delimiter between DataFiles and MyDataList)
SQL Server Admin 2014 :: Cannot Access Path When Attaching Database With Data Files On SMB Share
Oct 1, 2014I have a Windows Server 2012 R2 2 node cluster with SQL Server 2014 FCI installed. Data files are on a separate Windows Server 2012 R2 file server. Data files share has been permissioned to the SQL Server service and SQL Server Agent service accounts as Full Control. NTFS Permissions are Full Control.
When I try to attach a database
CREATE DATABASE AdventureWorksDW2012
ON (FILENAME = 'apricotmssql_VIOLETMSSQL12.MSSQLSERVERMSSQLDATAAdventureWorksDW2012_Data.mdf')
FOR ATTACHI get this error:
Msg 5120, Level 16, State 101, Line 4
Unable to open the physical file "apricotmssql_VIOLETMSSQL12.MSSQLSERVERMSSQLDATAAdventureWorksDW2012_Data.mdf". Operating system error 5: "5(Access is denied.)".
If I log into the file server (called APRICOT) and look at the NTFS permissions they all look good. I have also reapplied the NTFS permissions from the root folder down.
EDIT
If I log on to one of the nodes in the cluster as the SQL Server service account and navigate to apricotmssql_VIOLETMSSQL12.MSSQLSERVERMSSQLDATA and copy and paste the data file, it works fine.
EDIT2:
If I log on to the file server and Enable Inheritance at the root level, then Replace all child objects with inheritable permission entries from this object, I get this error:
User Account Control settings on all nodes and the file server are set to Never notify
FOR XML PATH
Feb 13, 2008Sorry if this is not the correct forum... I am using the FOR XML PATH feature of SQL Server 2005 (Amazing!!) Is it possible to return multiple rows? For example:SELECT 'Field1' AS 'Element1/@Field1'FROM TableFOR XML PATH('Repeating') Say the above SELECT returns 5 records, I want it to return 5 rows of xml in my ASP.NET application. So in this case each of the 5 rows would contain:<Repeating><Element Field1="Field1"></Element> <Repeating>Instead of returning 1 row with all the xml together.
View 2 Replies View RelatedFOR XML PATH('')
Apr 16, 2008Greetings
When using sp_xml_preparedocument @hdoc OUTPUT, @doc I see code everywhere with huge xml text embedded in some store procedures. Can the
SELECT XXX
FROM XXX
FOR XML PATH('') syntax be used instead to produce the second parameter @doc (xmltext) for sp_xml_preparedocument ?
Thanks
Trying To Use UNC Path
Dec 19, 2007
Hi,
Im trying to reference a ExcelFilePath connection properties using a UNC path, however it doesnt seem to like it, when i use a mapped drive everything works fine.
Can UNC paths be used in ISIS ?
Help: Shortest Path In Sql
Jun 4, 2007Hello to all,
help, help,...
i have with this problem since 3 weeks, until now i cann't resolve this problem. Maybe can somebody help me. I am hopeless.
i have a data table ValidRelationship, i will check if there is a relationship between two members by this table.
datas in the table ValidRelationship:
IDMember IDOtherMember IDType
3700
3726
10000
3726
3700
10000
3742
3672
10000
3672
3742
10000
3422
3548
10000
3548
3422
10000
3548
3717
10000
3717
3548
10000
3675
3695
10000
3695
3675
10000
I will give two member and check their Relationship with a sql query. but it can be that this two member have no relationship. So i define here that man should search processor <= 6 . To better describe i use a example: max. Result of this query is: 1-2-3-4-5-6. If this is a relationship between 1-7 is 1-2-3-4-5-6-7, but i will give a answer that this is no relationship between 1-7. because processor > 6.
But my problem is: this query executing is too slow. if i habe two member no relationship, the time of this complete sql query to execute is more than 1 minutes. Is my algorithm wrong, or where is the problem, why this executing is so slow? How can i quickly get the relationships between two member, if my algorithms is not right? The following Query is only to processor = 3, but it works too slowly, so i don't write remaining processors.
declare @IDM int;
declare @IDO int;
set @IDM = 3418;
set @IDO = 4270
select top 1 IDMember
from v_ValidRelationships
where IDMember = @IDM
and @IDO in (select a.IDOtherMember from v_ValidRelationships as a where a.IDMember = @IDM)
select top 1 a.IDMember, b.IDMember
from v_ValidRelationships as a, v_ValidRelationships as b
where a.IDMember = @IDM
and b.IDMember in (select c.IDOtherMember from v_ValidRelationships as c where c.IDMember = @IDM)
and @IDO in (select d.IDOtherMember from v_ValidRelationships as d where d.IDMember = b.IDMember )
select top 1 a.IDMember, b.IDMember, e.IDMember
from v_ValidRelationships as a, v_ValidRelationships as b, v_ValidRelationships as e
where a.IDMember = @IDM
and b.IDMember in (select c.IDOtherMember from v_ValidRelationships as c where c.IDMember = @IDM) and e.IDMember in (select f.IDOtherMember from v_ValidRelationships as f where f.IDMember = b.IDMember)
and @IDO in (select d.IDOtherMember from v_ValidRelationships as d where d.IDMembe = e.IDMember)
If someone has a idea, please help me. Thank a million
Best Regards
Shasha