I have a problem.
I do a basic report with just one simple table:
_id
_name
_comment
_file
I'm able to get all informations into a table. But for the file, I created a URL Link for this file.
But when the reporting is generating in html, if I click on the file's link, nothing happens. But I can dowload the file with a right click. And if I see proprieties of the link, the link is rights, and it's works good if I copy and paste it on the IE url bar.
So for summary, my problem is : nothing happens if I click on the file, but a want a window's opening with the choose "Open with" or "Save on the disk".
I did the following steps: 1. Created a report using SQL Reporting Services. (OK) 2. Deployed the project (ABC) into the ServerX. (OK) 3. Opened the SQL Reporting Services using the Report Manager on localhost of the ServerX. (OK) 4. Opened the ABC folder. Files deployed. (OK) 5. Created two subscriptions. One (Service1) for printing to the Printer. One (Service2) for saving into a file. (OK) 6. Opened the Service1. In the View Tab, after entering the Report Parameters, clicked on "View Report". (OK) 7. I expected view to show what I viewed in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different) 8. Tried to export to a TIFF file expecting to see the same view as I saw in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different) 9. Tried to export to a PDF file expecting to see the same view as I saw in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different) 10. In the subscriptions, I ran the Service1 to print the report from the SQL Reporting Services directly onto the Printer. (NOK - It printed a wrong format. Alignment was completely different)
Is this an expected issue with SQL Reporting Services which incase doesnt make any sense to use it. Or it is an issue with my code. All I assumed that I should expect from SQL Reporting Services is: if I create a Report and I preview the Report, I should get a WYSIWYG formats.
Half the way through our project, we are completely stuck up. SOS!!!
I did the following steps: 1. Created a report using SQL Reporting Services. (OK) 2. Deployed the project (ABC) into the ServerX. (OK) 3. Opened the SQL Reporting Services using the Report Manager on localhost of the ServerX. (OK) 4. Opened the ABC folder. Files deployed. (OK) 5. Created two subscriptions. One (Service1) for printing to the Printer. One (Service2) for saving into a file. (OK) 6. Opened the Service1. In the View Tab, after entering the Report Parameters, clicked on "View Report". (OK) 7. I expected view to show what I viewed in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different) 8. Tried to export to a TIFF file expecting to see the same view as I saw in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different) 9. Tried to export to a PDF file expecting to see the same view as I saw in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different) 10. In the subscriptions, I ran the Service1 to print the report from the SQL Reporting Services directly onto the Printer. (NOK - It printed a wrong format. Alignment was completely different)
Is this an expected issue with SQL Reporting Services which incase doesnt make any sense to use it. Or it is an issue with my code. All I assumed that I should expect from SQL Reporting Services is: if I create a Report and I preview the Report, I should get a WYSIWYG formats.
Half the way through our project, we are completely stuck up. SOS!!!
Environment:Server1 (Local)OS Windows 2000 ServerSQL Server 2000Server2 (Remote)OS Windows 2003 ServerSQL Server 2000(Both with most recent service packs)Using Enterprise Manager, we have set up the Link Server (LINK_A) inthe Local Server 1 to connect to Server 2.The SQL we need to run is the following:INSERT INTO table1(column1,column2)SELECT A.column1, A.column2FROM LINK_A.catalog_name.dbo.table2 AS AWHERE A.column1 xxxx;When we run this from the Query Analyzer, it completes with no problemsin a few seconds.Our problem:When we add the DTS Package as the ActiveX Script (VB Script) to theLocal Package, it times out at "obj_Conn.Execute str_Sql"Dim Sql, obj_ConnSet obj_Conn = CreateObject("ADODB.Connection")obj_Conn.Open XXXXobj_Conn.BeginTransstr_Sql = "INSERT INTO table1("str_Sql = str_Sql & "column1"str_Sql = str_Sql & ", column2"str_Sql = str_Sql & ")"str_Sql = str_Sql & " SELECT Ａ.column1"str_Sql = str_Sql & ", A.column2"str_Sql = str_Sql & " FROM LINK_A.catalog_name.dbo.table2 AS A"str_Sql = str_Sql & " WHERE A.column1 0"str_Sql = str_Sql & ";"obj_Conn.Execute str_Sql----------------------------------------------------------When we make a Stored Procedure and run the following SQL, it freezes.INSERT INTO table1(column1,column2)SELECT A.column1, A.column2FROM LINK_A.catalog_name.dbo.table2 AS AWHERE A.column1 xxxxWe've also tried the following with the same results;INSERT INTO table1(column1,column2)SELECT A.column1, A.column2FROM [LINK_A].[catalog_name].[dbo].[table2] AS AWHERE A.column1 xxxxThe same thing happens when we try to run the "SELECT" by itself.SELECT TOP 1 @test=A.column1FROM LINK_A.catalog_name.dbo.table2 AS AWHERE A.column1 xxxxORDER BY A.column1What is going wrong here, and how do we need to change this so that itruns without timing out or freezing?
I installed Reporting Services 2014 on Windows 7. When i am trying to start home page i can see only HTML page and the text: "localhost/reports - /",then double lines (<hr><hr>) and text "Microsoft SQL Server Reporting Services Version 12.0.4100.1"Maybe the windows user (SERVER_NAMEADMINISTRATOR) has not sufficient permissions ?
i would like to show all Labels available in a Chart and rotate the Labels 90°. How can i do that ? I changed the Propertie "Interval" to 1, "LabelsAngle" to 90, "LabelsAutoFitDisabled" to true in my Chart Axis.
I have a parameter that chooses its available items from a query (with a label and a value column). I set the default for the parameter to the a particular value.
It works in Preview from design mode, but when I deploy it and run the report, it does not set the default.
I have SQL Server 2012 SP2 x64 Express Advanced Services installed on Windows 10 Pro 64 bit.
I cannot find the Report Builder download link for SQL Server 2012 SP2 x64 Express Advanced Services on Windows 10 Pro.
Shouldn't the Report Builder link be for SQL Server 2012 SP2 and x64 bit in order to work with SQL Server 2012 SP2 x64 Express Advanced Services on Windows 10 Pro 64 bit?The only Report Builder 3.0 links I have found have been x86 (32 bit) and SP1.
I have reports developed in SQL Server 2005 (.rdl file) and using report viewer in my ASPX page.Now we have upgraded SQL Server 2005 to 2012, how I can use exsisting .rdl file or what change I need to do.
Is there anyway to create a single report and somehow just send the rest of my team some sort of link to it? Or, would I have to upload the report to the internet? The company works on a company wide intranet. I don't know if there is any better way to explain what I am looking for then that. Thanks in advance. -Kyle
1 I have summary and detail report into same page (Open below link for reference). Now i want highlight selected value after clicking in summary report for open detail report...
[URL]
2. I have a report with multiple link which one redirect to other reports. After exporting link is showing and able to open other reports from excel. I want disable link after exporting into excel. How can disable link after exporting in excel ?
I have a query that joins with different table using link server in the database. SSSI doesn€™t take the query. How to make the SSIS package query to use the link server in the data base ?
We have (SP 2010) 2 SharePoint lists. List A - listing dates and users working those dates. The users field is a Look up Column pulling from List B. Â Â List B -Display detailed information about each user. Also using SQL Server Report Builder
In SP (list A) if you click on the user's hyperlinked name it opens the details perfectly.
[URL]
However, I am using SSRS and wanting to perform the same functionality. If I display the data, the name fields are not displayed as Hyperlinks. When I attempt to edit,(Action / Go to URL) and paste in;
[URL]
Every row displays the same (#25) person. If I try something like;
[URL]
It finds the basic list, but not the specific user. The values are empty.
I need this to be dynamic. How should I edit to show each specific user?
I have published SSRS reports to sharepoint and used the Reporting Services Report viewer to present the reports on a Page.  Everything works fine for the day, however in the morning, when I go to view the page, I get an error messageÂ
The report server cannot process the report. The data source connection information has been deleted. (rsInvalidDataSourceReference)
Installed SQL Server 2008 with Reporting Services to a Windows Server 2008 box. Tried to open the Report Manager and had no tabs and no Site Settings link - just a blank home page. I am logged onto the server with local administrator rights, so it shouldn't be a permissions issue.
Thinking the installation was bad (IIS was not installed before installing SSRS), I uninstalled and re-installed SSRS after setting up IIS 7 on the server. Still the same issue - just a blank home page in report manager with no ability to add users or assign roles or see anything except the links for "Home", "My Subscriptions", and "Help".
the Dataset in my report doesn't update the fields' values from the database. I refresh the dataset manualy in the SQL Server Business Intelligence Development Studio to see the new values in the report.
Just upgraded to Windows 10. My SSRS reports, SharePoint 2013 integrated, still work but have no scroll bars. I can use the touchscreen to scroll left and right. Mouse wheel or any other attempts to scroll the report view don't work.
I have the following situation: A webserver in a DMZ which connects to a DbServer in a Domain.
but when I try to make a ODBC connection on the webserver I get the well-known "Server does not exist or access denied" error.
I tried using IP address as well as FQDN. I turned off the firewall in the router (I'm able to access shares and what not from the webserver so the firewall is really turned off).
I think however i have narrowed down the problem to the TCP/IP connection of the SQL Server. Normally when you try from a command prompt "telnet dbserver 1433" you get a connection. But when I try this to the specific DbServer I get an "unable to connect" error. Even when I try it on the dbserver itself (so telnet localhost 1433). This should work always?
In the network configuration of the sql server the Named Piped as well as the TCP/IP protocols are enabled. TCP/IP is offcourse configured on port 1433.
Is it possible to display only the first few words of a block of text with a "Show More" link at the end, which when clicked would expand the block to show all content?
"Collapsed": Lorem ipsum dolor sit amet, consectetur adipiscing elit, <...show more>
"Expanded": Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum. <... show less>
Hello! I'm trying to get caching work with ASP.NET 2.0 and SQL Server 2005, but I have a problem and I can't figure out what I'm doing wrong.I have tried to do everything according to the instructions. I have enabled the database for cache notification by running the aspnet_regsql tool on the command line like this:aspnet_regsql -S server -E -d database -etThen I have run the aspnet_regsql tool to enable each table in the database for cache notification:aspnet_regsql -S server -E -d database -et -t tablenameI have added the necessary parts into web.config file, so that it is like this:<connectionStrings><add name="ConnectionString1" connectionString="DataSource=servername;Database=databasename;Integrated Security=True"providerName="System.Data.SqlClient"/> </connectionStrings> <system.web> <caching> <sqlCacheDependency enabled="true" pollTime="2000"> <databases> <add connectionStringName="ConnectionString1" name="KJ"/> </databases> </sqlCacheDependency> </caching>I have added this into global.asax file for the application start event: System.Data.SqlClient.SqlDependency.Start(ConfigurationManager.ConnectionStrings("ConnectionString1").ToString())To test caching I wrote this piece of code where I get data from the table MAAKUNNAT in the database.----------SqlCacheDependencyAdmin.EnableTableForNotifications(ConfigurationManager.ConnectionStrings("ConnectionString1").ToString(),"MAAKUNNAT")Dim maakunnatDS As New DataSetIf Cache.Get("maakunnat") Is Nothing Then Dim myConnection As NewSqlConnection(ConfigurationManager.ConnectionStrings("ConnectionString1").ToString()) myConnection.Open() Dim cmd As New SqlCommand("haemaakunnat", myConnection) cmd.CommandType = CommandType.StoredProcedure Dim riippuvuus As New SqlCacheDependency("KJ", "MAAKUNNAT") Dim aggDep As New AggregateCacheDependency aggDep.Add(riippuvuus) Dim maakunnatDA As SqlDataAdapter = New SqlDataAdapter maakunnatDA.SelectCommand = cmd maakunnatDA.Fill(maakunnatDS, "MAAKUNTA") myConnection.Close() Cache.Insert("maakunnat", maakunnatDS, aggDep) Else Response.Write("The data is in the cache") maakunnatDS = Cache.Get("maakunnat")End If-----------------But when I run the page I get this error.------------------------------------------The 'MAAKUNNAT' table in the database 'KJ' is not enabled for SQL cachenotification.Please make sure the table exists, and the table name used for cachedependency matches exactly the table name used in cache notificationregistration.To enable a table for SQL cache notification, please useSqlCacheDependencyAdmin.EnableTableForNotifications method, or the commandline tool aspnet_regsql. To use the tool, please run 'aspnet_regsql.exe -?'for more information.To get a list of enabled tables in the database, please useSqlCacheDependencyManager.GetTablesEnabledForNotifications method, or thecommand line tool aspnet_regsql.exe.----------------------------------------------When I run the aspnet_regsql tool with the -lt parameter to get a list of enabled tables in the database they are all enabled. I have searched many pages in the internet and I cannot find out what I'm still doing wrong. I'd appreciate it very much if someone could help me with this problem.Toni S.
I have a package that works fine on XP. I copy it (and the databases used within it) to my new Vista Business Edition box (with SQL 05 SP2 with Hotfix.) Both the source and destination databases are on the 05 SP2 with Hotfix installation on this Windows Vista box (this is a completely local transformation.) The account I am logged in with is an Administrator on the box (and I have done the whole Vista provisioning deal.) Furthermore BUILTINAdmins is not disabled. Furthermore I went so far as giving this account every server role.
Short of it is when I use SQL Destination it fails - regardless of the options used. When I use an Ole Db Destination it works.
So, to prove that I am not crazy I recreated this package from scratch, and used a SQL Server Destination. The account I am using has essentially every permission imagineable. And to repeat: yes, I'm transferrring from a local database (on this box) to another database (on this box) and SSIS is running through BIDS on this box.
At this point I'm beginnning to think that it is broken on Vista, but I can't believe someone else hasn't run into this. However, when I look at the groups - nothing. Any ideas?
I'm building a web app in c# that will consume sql rdl reports. These reports are hosted at MaxmimumASP and the physical location requires us to login with our one and only network account or to at least impersonate the authorized account in code. (Note that this all stored under SSL on a server different than our web app).
This is easy enough using the provided ReportService. However, we desire the functionality in ReportViewer that gives the toolbar and multiple export options.
So some serious work-arounds are in order.
Using ReportService, I can easily impersonate our MaximumASP account with:
ReportingService service = new ReportingService(); service.Credentials = new System.Net.NetworkCredential(user, pword, domain);
Using the ReportService leaves us with a stream of binary information. Under this set of conditions, direct rendering to PDF doesn't seem to work (or at least I can't get it to.).
Another problem is that embedded images either do not show up, require another challenge/response even though we did this in our cs page, or require us to stream them to the app's directory (see: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/rsprog/htm/rsp_ref_soapapi_service_lz_49f6.asp?frame=true)
The big question. Does anybody have a way to get ReportServices stream to display in ReportViewer without using temporary files?
I'm working on a report to show financial transactions from a table over a certain period. For most transactions there is a PDF document that is stored in a separate table in a binairy format. In my report I would like to include a link on every line with transaction information in the report that opens the PDF that is linked to that transaction. Just to be clear, I don't want to embed the PDF in the report but I want the users of the report to have the option to view the PDF that is related to that transaction in their standard pdf reader (adobe).
Code to do the following:
Once a user clicks on the link to view the PDF I need the code to get the binairy data of the PDF file from the table, convert it back to a PDF and open it in the default pdf reader (for example adobe reader). If it can't directly open the file then it's maybe possible to activate the 'open or download' pop up that you also get when you download something from a website.Â
I have this script in my database, but it always gives 2054 rows back and if I actually DO change something it doesn't even notice...
UPDATE a SET a.[omschrijving]=SP.[omschrijving] ,a.[verkoopprijs]=SP.[verkoopprijs] ,a.[gewijzigd]=getDate() FROM [artikelen] a LEFT OUTER JOIN [Hofstede].[dbo].[sparepartsupdate] SP ON a.PartNrFabrikant = sp.PartNrFabrikant WHERE ((A.omschrijving != SP.[omschrijving]) OR (A.[verkoopprijs] != SP.[verkoopprijs]))
I made a page for a baseball league a couple of years ago using PHP and MySQL, and decided this winter to switch it to ASP.Net and SQL Server Express that comes with VWD 2005 Express Edition.
Anyways, I ran into a problem when trying to convert the query I made with MySQL into SQL Server.
My old code was something like this:
SELECT homeScore, visitorScore, ( homeScore > visitorScore ) AS homeWins, ( visitorScore > homeScore ) AS visitorWins FROM Schedule
This worked fine in MySQL, and returned the home team's score, visiting team's score, and then returned a 1 in homeWins if the home team won. Now, when I try running this query in SQL Server Express, I get an error saying "Invalid column name 'visitorScore > homeScore' ".
Can anyone please help me with what I should be doing differently so this works in SQL Server Express?! Thanks in advance!!!
Hello,I'm an absolute newbie when it comes to SQL. I was told that SQLserver does not function well on a WAN where network latency between,say, the SQL server and a front-end server is greater than 250ms.I can't find anything information supporting this claim online, so Iwas hoping someone here could tell me if this is true or not?Thank You!!
I have Vista Ultimate installed and within Vista .NET Framework 3.0 is installed as a part of the operating system so I can't remove 3.0 Now for MS SQL Server 2005 Express I need .NET Framework 2.0 and the SQL Server 2005 doesn't work with .NET Framework 3.0 Can't install 2.0, get the message that 3.0 is already installed. Is there another version of SQL Server that works with .NET Framework 3.0 and runs under Vista Ultimate? Please help me!!
