SQL Server Sorting Criteria

May 14, 2007

Hi All,

I've read aroud the following tecqnique to parameterize the sort criteria of a stored procedure:



PROCEDURE [ParamSortProc_EXAMPLE]

...

@SortField VARCHAR(64)

AS

BEGIN

SET NOCOUNT ON

-- ....



IF @SortField NOT IN ('Field1', 'Field2', 'Field3', 'Field4')

BEGIN

SET @SortField = 'Field1' -- Default

END



SELECT

-- ...

FROM

-- ...

WHERE

-- ...

ORDER BY

CASE @SortField WHEN 'Field1' THEN T.Field1 END ASC,

CASE @SortField WHEN 'Field2' THEN T.Field2 END ASC,

CASE @SortField WHEN 'Field3' THEN T.Field3 END DESC,

CASE @SortField WHEN 'Field4' THEN T.Field4 END DESC



The point is: the sort field is choosed based on the actual value of @SortField.



Provided the source table T has specific indexes for all the 4 fields involved into the sorting operation, does the engine actually benefit from it or, instead, treat the 4 sort conditions as computed fields and so build a temporary index to face with it?



Thanx a lot for your reply.

View 3 Replies


ADVERTISEMENT

Best Practice Question: JOIN Criteria Vs. WHERE Criteria

May 24, 2004

For example, consider the following queries:


DECLARE @SomeParam INT
SET @SomeParam = 44

SELECT *
FROM TableA A
JOIN TableB B ON A.PrimaryKeyID = B.ForeignKeyID
WHERE B.SomeParamColumn = @SomeParam

SELECT *
FROM TableA A
JOIN TableB B ON A.PrimaryKeyID = B.ForeignKeyID AND B.SomeParamColumn = @SomeParam


Both of these queries return the same result set, but the first query filters the results in the WHERE clause whereas the the second query filters the results in the JOIN criteria. Once upon a time a DBA told me that I should always use the syntax of the first query (WHERE clause). Is there any truth to this, and if so, why?

Thanks.

View 3 Replies View Related

Sorting And Grouping Question By Allowing Users To Select The Sorting Field

Feb 11, 2007

I have a report where I am giving the users a parameter so that they can select which field they would like to sort on.The report is also grouping by that field. I have a gruping section, where i have added code to group on the field I want based on this parameter, however I also would like to changing the sorting order but I checked around and I did not find any info.

So here is my example. I am showing sales order info.The user can sort and group by SalesPerson or Customer. Right now, I have code on my dataset to sort by SalesPerson Code and Order No.So far the grouping workds, however the sorting does not.



Any suggestions would help.


Thanks

View 1 Replies View Related

Reporting Services :: Horizontal Axis Show Last Value In First And Last Space When Sorting A-z But Shows Correctly When Sorting Z-a

Jul 10, 2015

SSRS 2012 - VS2010...The report compares two years with a sort order on a value that has been engineered based on text switched to int.  When sorting A-Z this is the result in the horizontal axis is: 5th, K, 1st, 2nd, 3rd, 4th, 5th..When sorting Z-A the result in the horizontal axis is:5th, 4th, 3rd, 2nd, 1st, PreK..Z-A is correct but A-Z sorting shows 5th as the start and end.  The magnitude of the PreK location is correct but the label is wrong on the A-Z sort order.  The sorting is implemented using the Category Group sorting option.

View 6 Replies View Related

SQL Server 2012 :: Get OrderIDs That Only Match The Criteria

Aug 8, 2015

I am stuck with a query that I am working on. I have data like below.

DECLARE @Input TABLE
(
OrderID INT,
AccountID INT,
StatusID INT,
Value INT
)

INSERT INTO @Input VALUES (1,1,1,15), (2,1,1,20), (3,2,1,5), (4,2,2,40), (5,3,1,20), (6,1,2,40), (7,1,2,40)

If an Account's value reaches 20 for StatusID = 1 and 40 for StatusID = 2, that is a called "Good". I want to find out which order made the Account become "Good".

By looking at the data, it is understandble that AccountID 1 crossed Status ID 1's limit of 20 with order 2, but the status ID 2's limit was only crossed after the 6th order was placed. So my output should show 6 for AccountID 1.

For AccountID 2, value of statusID 1 was 5 with orderid 3, but it reached the limit for status id 2 of 40 with order 4. But the first condition was not met. so it shouldn't be seen in the output.

Same with AccountID 3 as well, It reached the limit of status id 1 with order 5 but the limit for order 2 wasn't reached so it should be ignored as well.

I wrote the code as below, its working fine but I still know there are better ways to write since I will be working with atleast a million records.

;WITH CTE AS
(
SELECT OrderID,AccountID, StatusID, SUM(Value) OVER(Partition By AccountID, StatusID ORDER BY OrderID) AS RunningTotal
FROM @Input

[Code] ....

View 2 Replies View Related

Access Query Against SQL Server Works Only Without Criteria

Jun 23, 2006

Getting a weird error while trying out a query from Access 2003 on aSQL Server 2005 table.Want to compute the amount of leave taken by an emp during the year.Since an emp might be off for half a day (forenoon or afternoon), havethe following computed field:SessionOff: ([ForenoonFlag] And [AfternoonFlag])The query works fine when there's no criterion on SessionOff.However, when I try to get the records where the SessionOff equals 0, Iget the following error:~~~~~ODBC--call failed. [Microsoft][SQL Native Client][SQL server]Incorrect syntax near the keyword 'NOT'. (#156)~~~~~I checked the SQL of the Access query, but there's no NOT anywhere init:~~~~~SELECT tblWorkDateAttendance.*FROM tblWorkDate INNER JOIN tblWorkDateAttendance ONtblWorkDate.WorkDate = tblWorkDateAttendance.WorkDateWHERE (((([ForenoonFlag] And [AfternoonFlag]))=0) AND((tblWorkDateAttendance.WorkDate)<Date()) AND((Year([tblWorkDate].[WorkDate]))=Year(Date())) AND((Weekday([tblWorkDate].[WorkDate])) Between 2 And 6) AND((tblWorkDate.HolidayFlag)=False));~~~~~What gives?

View 4 Replies View Related

Passing Like Criteria In Parameter To SQL Server Stored Procedure

Dec 13, 2006

Hello All,
 I was hoping that someone had some wise words of wisdom/experience on this.  Any assistance appreciated... feel free to direct me to a more efficient way... but I'd prefer to keep using a stored proc.
  I'm trying to pass the selected value of a dropdownlist as a stored procedure parameter but keep running into format conversion  errors but I am able to test the query successfully in the SQLDatasource.  What I would like to do is this: select * from tblPerson where lastnames Like "A%" . Where I pass the criteria after Like.   I have the values of the drop down list as "%", "A%", "B%", ....
I've been successfully configuring all of the other params, which includes another dropdown list (values bound to a lookup table also)... but am stuck on the above...
 Thank you for any assistance,
 

View 3 Replies View Related

SQL Server 2012 :: Adding Flags Depending On Criteria

Feb 12, 2014

I have a data output with many rows. In order to group things with flags, I do this in excel using 2 formulas which *** a flag of 0 or 1 in 2 new columns.

This takes a long long time as I have hundreds of thousands of rows and wondered of I could do it in sql?

Its transact SQL and the formulas I use in excel are:

=IF(SUMPRODUCT(($A$2:$A2=A2)*($B$2:$B2=B2)*($C$2:$C2>=C2-1/24)*($C$2:$C2< C2+1/24))> 1,0,1)
=IF(SUMPRODUCT(($A$2:$A2=A2)*($B$2:$B2=B2))>1,0,1)

How I can do this in sql??

The columns above do not relate to the actual columns I use, just an example.

View 9 Replies View Related

SQL Server 2012 :: SELECT Multiple Criteria If Not Null

Sep 2, 2014

I have a dataset where i want to select the records that matches my input values. But i only want to try macthing a field in my dataset aginst the input value, if the dataset value is not NULL.

I always submit all 4 input values.

@Tyreid, @CarId,@RegionId,@CarAgeGroup

So for the first record in the dataset i get a succesfull output if my input values matches RegionId and CarAgeGroup.

I cant figure out how to create the SQl script for this SELECT?

My dataset
TyreIdCarIdRegionIdCarAgeGroup
NULLNULL1084 2
65351084 1
5351084 1
NULL411085 NULL
120NULLNULL NULL
NULLNULL1084 2
65NULL1084 NULL

View 9 Replies View Related

SQL Server 2008 :: How To Hide Criteria In Search Results

May 28, 2015

Say I want to search for a range of account numbers but only which are active. After I set my field for A (active) this field shows in my results, I dont want it to.

In Access you can easily just uncheck that field in design view, but how do I do it in sql?

View 4 Replies View Related

SQL Server 2012 :: Including Spreadsheet Data Into Exclusion Criteria?

Sep 18, 2015

I am trying to import data from 4 columns in a spreadsheet, the Columns are (Last Name - First Name - ID - Code) and this spreadsheet has around 10k records. I want to add what is in this spreadsheet to the query I have below that uses the EXCEPT operator but I am not sure the best way to go about it.

Using the example I have filtered below for the name "Denise Test", at the end of the day I want everything that is in the spreadsheet to also be excluded from the results.

So before the spreadsheet lets say the 2nd query referencing table C has the following results for Denise Test

Last_Name First_Name ID Code
Test Denise 1 5
Test Denise 2 4

After adding the spreadsheet I want it to show this:

Last_Name First_Name ID Code
Test Denise 1 5
Test Denise 2 4
Test Denise 3 3

Here is the query as it stands now without the inclusion of the spreadsheet:

SELECT
ta.last_name,
ta.first_name,
tb.ID,
tb.code
FROM
TableA ta
INNER JOIN TableB tb

[code]....

View 0 Replies View Related

SQL Server 2005 Sorting

Jul 23, 2007

I have a string filed which holds ID's such as:
1, 1.1, 1.2, 1.1.1, 1.1.2
I need to run a query to sort these by ID such as the result should be: 1, 1.1, 1.1.1, 1.1.2, 1.2
There could be infinite levels ie. 1.1.1.1.1, i'm baffled by this at the mo as i can't cast it to say a float and then sort because of the muliple points. Any ideas would be great. Looking for mimumum overhead here, would like to do it on the SQL Server side
 Thanks.

View 9 Replies View Related

Sorting Data, ADO, SQL Server Etc...

Feb 21, 2008

Ok, it is a given that sorting operations are sometimes expensive in SQL Server using the ORDER BY clause because the relational model is not really well suited to sort data blah blah blah.

So the canned DBA response is "this is a presentation issue, handle it in the presentation layer".

OK, great. Problem solved. So I am digging around in the ADO.Net object model trying to give a junior developer some guidance and i am trying to figure out what is the best way in ADO.Net to order what we used to call a recordset where the sorting is not done at the SQL Server, but in IIS.

I imagine there is some overhead in this operation as well. Is it really going to save me some overall performance or am I just shifting the burden and I will not likely see any appreciable difference?

View 8 Replies View Related

Sorting Problem With Linked Server

Jul 23, 2005

I am using SQL Server 2000. I am getting the following error whenexecuting the following query. The query joins a view[Server2].dbx.dbo.vwreports that resides on a linked server. I can sorton fields on D table or R view individually, but some fields take along time to sort even they are on non-cluster indexes. I can not sorton any field in table E, K, and L at all. Also I tried to save thisquery as a view in the local server. SQL Server does not allowcreating a view base on this query.Does anyone know why?===== Error here =======Microsoft OLE DB Provider for SQL Server error '80040e14'Only text pointers are allowed in work tables, never text, ntext, orimage columns. The query processor produced a query plan that requireda text, ntext, or image column in a work table.===== Query here =======SELECT D.*, DATEADD(s, R.open_date, '12/31/1969 08:00:00pm') ASopenDate, DATEADD(s, R.close_date, '12/31/1969 08:00:00pm') AScloseDate, R.c_last_name AS custLastName, R.c_first_name AScustFirstName, R.description, (DATEDIFF(s, DATEADD(s, R.open_date,'12/31/1969 08:00:00pm'), getdate()))/(60*60*24) as lapse, E.[LASTNAME] AS techLastName, E.[FIRST NAME] AS techFirstName, E.EMPLOYEEID AStechID, K.MAKE, K.MAKEID, L.MODEL, L.MODELID, R.customer AS customer,R.iorg_name AS org FROM dbo.DellIDI D LEFT OUTER JOIN dbo.EMPLOYEE E onD.technicianid = E.employeeid LEFT OUTER JOIN dbo.MAIN M ON D.Serial =M.[S/N] LEFT OUTER JOIN dbo.MAKE K ON M.MAKE = K.MAKEID LEFT OUTER JOINdbo.MODEL L ON M.MODEL = L.MODELID INNER JOIN[Server2].dbx.dbo.vwreports R ON D.RequestID = R.ref_num order by(DATEDIFF(s, DATEADD(s, R.open_date, '12/31/1969 08:00:00pm'),getdate()))/(60*60*24)

View 1 Replies View Related

SQL Server 2012 :: Calculate Number Of Groups And Group Size With Multiple Criteria

Jun 15, 2015

I need to calculate the last two columns (noofgrp and grpsize) No of Groups (count of Clientid) and Group Size (number of clients in each group) according to begtim and endtime. So I tried the following in the first Temp table

GrpSize= count(clientid) over (partition by begtime,endtime) else 0 end
and in the second Temp Table, I have
select
,GrpSize=sum(grpsize)
,NoofGrp=count(distinct grpsize)
From Temp1

The issue is for the date of 5/26, the begtime and endtime are not consistent. in Grp1 (group 1) all clients starts the session at 1030 and ends at 1200 (90 minutes session) except one who starts at 11 and end at 1200 (row 8). For this client since his/her endtime is the same as others, I want that client to be in the first group(Grp1). Reverse is true for the second group (Grp2). All clients begtime is 12:30 and endtime is 1400 but clientid=2 (row 9) who begtime =1230 but endtime = 1300. However, since this client begtime is the same as the rest, I wan that client to be in the second group (grp2) My partition over creates 4 groups rather than two.

View 9 Replies View Related

SQL Server 2008 :: How To Delete Tables In Database Whose Table Names Match A Criteria

Jul 22, 2015

The database has approx. 2500 temporary tables. The temp tables match a pattern such as APTMP... I tried deleting the tables in SSMS with the statement, Delete from Information_Schema.tables where substring(table_name,1,5) = 'APTMP' This returns the error message"Ad hoc updates to system catalogs are not allowed".

What is the correct way to delete a group of tables whose name match a pattern from within SSMS?

View 9 Replies View Related

Problem Of Sorting Records In A Sql Server Table

Mar 24, 2006

akanksha shukla writes "the issue is that i want to sort the records stored in a table according to aparticular column in such a manner that the sorted reaults are permanantly commited onto the same table i.e. the results are reflected on the same table whose records are being used for sorting
i know that order by clause can provide me a view of records sorted on basis of a particular column but the changes are not being reflected onto the table .
i donot want to create a fresh table to reflect the changes.
kindly suggest some help"

View 3 Replies View Related

SQL Server 2012 :: Sorting By Alphanumeric Table Column Of NVARCHAR Datatype

Sep 24, 2015

I am trying to sort my sql resultset by an alphanumeric column of a table which is of NVARCHAR datatype. The sample data is given below:

CREATE TABLE #Activities(activityName NVARCHAR(100))

INSERT INTO #Activities VALUES('Field phase S14-04932-01')
INSERT INTO #Activities VALUES('Phase reporting')
INSERT INTO #Activities VALUES('Phase running')
INSERT INTO #Activities VALUES('RD1')

[Code] ....

The output of the query is like this:

A1
A2
A3
A4
E1 0DAA1
E10
E2 0DAA2

[Code] .....

The output what I require is this:

A1
A2
A3
A4
E1 0DAA1
E2 0DAA2

[Code] ....

View 9 Replies View Related

WHERE Criteria

Nov 28, 2007

SELECT Wins, Losses, Wins/Games AS WinningPct
FROM standings
Where WinningPct > 0.5

SQL will not allow me to put a column that I created(WinningPct) as criteria for WHERE (I know this is cause Select is evaluated last)

How can I list my results according to criteria I am creating in my query?

View 9 Replies View Related

Best Searching Criteria

Sep 30, 2007

I have a table
 GO
 CREATE TABLE [dbo].[Speech] (  [SpeechId] [int] IDENTITY(1,1) NOT NULL CONSTRAINT PkSpeech_SpeechId PRIMARY KEY,  [UniqueName] [varchar](52) NOT NULL,  [NativeName] [nvarchar](52) NOT NULL,  [Place] [nvarchar](52) NOT NULL,  [Type] [smallint] NOT NULL,  [LanguageId] [char](2) NOT NULL CONSTRAINT FkSpeech_LanguageId FOREIGN KEY (LanguageId) REFERENCES Language(LanguageId) ON UPDATE CASCADE ON DELETE CASCADE,  [SpeakerId] [int] NOT NULL CONSTRAINT FkSpeech_SpeakerId FOREIGN KEY (SpeakerId) REFERENCES Speaker(SpeakerId) ON DELETE CASCADE,  [IsFavorite] [bit] NOT NULL,  [IsVisible] [bit] NOT NULL,  [CreatedDate] [datetime] NOT NULL DEFAULT GETDATE(),  [ModifiedDate] [datetime] NULL )
Now I want to search the Table Speech
Sometimes by : SpeechIdSometimes by : SpeakerIdSometimes by : LanguageIdSometimes by : SpeechId And LanguageIdSometimes by : SpeakerId And LanguageId
All can have conditions with IsVisible, IsFavorite and Type columns.
for example
I need all Speeches withany particular SpeakerId and LanguageIdwith IsVisible equals to trueand IsFvaorite No Matterand Type equals to Audio
For these type of queries I think the solution is
GO
 CREATE PROCEDURE [dbo].[sprocGetSpeech]
  @speechId int = NULL,  @uniqueName varchar(52) = NULL,  @nativeName nvarchar(52) = NULL,  @place nvarchar(52) = NULL,  @type smallint = NULL,  @languageId char(2) = NULL,  @speakerId int = NULL,  @isFavorite bit = NULL,  @isVisible bit = NULL
 AS
  SELECT   SpeechId,   UniqueName,   NativeName,   Place,   Type,   LanguageId,   SpeakerId,   IsFavorite,   IsVisible,   CreatedDate,   ModifiedDate  FROM   Speech  WHERE   SpeechId = @speechId   AND UniqueName = CASE WHEN @uniqueName IS NULL THEN [UniqueName] ELSE @uniqueName END   AND NativeName = CASE WHEN @nativeName IS NULL THEN [NativeName] ELSE @NativeName END   AND Place = CASE WHEN @place IS NULL THEN [Place] ELSE @place END   AND Type = CASE WHEN @type IS NULL THEN [Type] ELSE @type END   AND LanguageId = CASE WHEN @languageId IS NULL THEN [LanguageId] ELSE @languageId END   AND SpeakerId = CASE WHEN @speakerId IS NULL THEN [SpeakerId] ELSE @speakerId END   AND IsFavorite = CASE WHEN @isFavorite IS NULL THEN [IsFavorite] ELSE @isFavorite END   AND IsVisible = CASE WHEN @isVisible IS NULL THEN [IsVisible] ELSE @isVisible END
Can anyone tell me?
Is it right way to do?Do you have any better solution?If my solution is better then Is there any performance loss with that query?

View 1 Replies View Related

BCP With Differing Criteria

Jul 12, 2002

I am familiar and happy with using BCP to export from SQL Server to a flat file

.. 1) Is there any way to pass a parameter to the sql script file each time so that i can vary the selection critria the script file uses each time?

.. 2) Can i batch the BCP calls together so they all use this parameter with some kind of 'super' BCP cammand?

Thanks in anticipation

View 3 Replies View Related

Group By Different Criteria

Feb 2, 2015

I have a table in the following format

reporting_date interest_payment balance
200401 10 10
200402 20 15
200403 30 20
200404 40 30
200405 50 40
200406 60 50
200407 70 60

i wanted to generate an OUTPUT in the following format :

The output of the query should look like this :

reporting_date interest_payment balance
Q1 -2004 60 10
Q2 -2004 170 30
Q3 -2004 70 60
Q4 -2004 0 0

i.e i wanted to represent data by quarter and year and group by quarter and year for interest_payment column but for balance i need to pick up the value from the first reporting date in that quarter ,so as you can see q1-2004 has 10,15 and 20 but only 10 is accounted as that was the first reporting date in that quarter

I have my query working for interest payment but i am not sure how do i pickup the first reporting value for balance in a quarter

SELECT report_year as "@date",'Q'+CAST(report_quarter+1 as varchar(1)) as "@quarter", SUM(a.balance) as "@balance", SUM(a.interest_payment) as "@interest_payment"
FROM (SELECT *,
(reporting_date%100 - 1)/3 as report_quarter,
reporting_date/100 as report_year
FROM employee) a
GROUP by report_year, report_quarter
order by report_year, report_quarter

View 1 Replies View Related

Get Multiple MAX With Where Criteria

Mar 17, 2015

use of Row_Number() over ( partition... but I dont understand how.

Imagine I have a table like
CustomerID, PartNum, QtyinOrder, shipped
1 6 3 0
1 6 2 0
2 6 1 0
2 5 1 0
2 5 2 0
2 5 3 0
2 5 4 1
1 6 4 1
2 6 2 1

But I wanted to return

CustomerID, PartNum, MaxQtyOrderedNotShipped

That would be just the rows
1 6 3 0
2 6 1 0
2 5 3 0

If I use this:

Select CustomerId,PartNum, shipped, QtyInOrder AS MaxOrderedNotShipped
from
(SELECT [CustomerID]
,[PartNum]
,[QtyInOrder]
,shipped
, row_number() over (partition by [CustomerID], PartNum order by QtyInOrder desc) as recid from [SILK].[dbo].[MaxofGroup]) as f where recid =1

there is no restriction, so I get the shipped...If I alter the where clause to work only on not shipped, I get no records...as below

Select CustomerId,PartNum, shipped, QtyInOrder AS MaxOrderedNotShipped
from
(SELECT [CustomerID]
,[PartNum]
,[QtyInOrder]
,shipped
, row_number() over (partition by [CustomerID], PartNum order by QtyInOrder desc) as recid from [SILK].[dbo].[MaxofGroup]) as f where recid =1 and shipped=0

View 2 Replies View Related

FROM Vs WHERE Selection Criteria

Jan 27, 2006

Hi,

While playing with SQL Server 2000 I found you can specify the selection criteria in either the FROM clause or the WHERE clause:
e.g.
select *
from Table1 a inner join Table2 b ON a.key = b.key and a.field = 1

Is logically the same as:
select *
from Table1 a inner join Table2 b ON a.key = b.key
where a.a = 1

Any comments on which is best, and why?

Thanks,

Chris

View 3 Replies View Related

Order By Criteria

Jun 7, 2006

jiang writes "Apologies in advance for my inexperience.

I have a SQL table to hold my product information:
prods(prodnum(char(10), prodname(char20), quantity(int))

The values in prodname column are like:
ABCDEF
ADCDEF
BCDEFG
CDEFGH

For those products that sold out, I made a mark in the front of prodname, like *ABCDEF

Then in my query, I want to sort the product name in alphabetic order, in addition, I also want to put prodname start with * at the end of the result list, like:

ADCDEF
BCDEFG
CDEFGH
*ABCDEF

I tried to use:
select prodname from prods order by prodname

this query shows *ABCDEF is on the top of the result, then I tried:

select prodname from prods order by charindex('*', namecode)

this query does put *ABCDEF at the bottom, but other records are not in alphabetic order.

Could you please help me? Many many thanks!
Jiang"

View 3 Replies View Related

Searching Criteria

Feb 5, 2007

hi all... how do i write my where clause if i wanna search BETWEEN something to something, but at the same time, find ALL if user send nothing (''), NOT searching for '' column... and also find date if they send a date, and if they dont send date, do not consider date at all(find all at any dates).. is this possible to in one where clause without any IF statement... thanks..


WHERE d.Ownership LIKE '%' + @ClientID +'%' AND
d.WhsID LIKE '%' + @WhsFrom + '%' AND
d.CustomLotNo LIKE '%' + @CustomlotnoFrom+ '%' AND
d.LocID BETWEEN @LocFrom AND @LocTo AND
d.ItemID LIKE '%'+ @ItemFrom + '%' AND
substring(d.LocID,1,1) LIKE '%' + @ZoneFrom AND
d.RecvDate <= @Date

~~~Focus on problem, not solution~~~

View 20 Replies View Related

Not Filtering Criteria

Mar 22, 2007

I am trying to filter data from columns and this is just not working. If I select all the criteria below and try to run it - I do not get any records returned.

WHERE (DropDt >= DATEADD(month, DATEDIFF(month, 0, GETDATE()) - 13, 0)) AND (DropDt <= DATEADD(month, DATEDIFF(month, 0, GETDATE()) - 1, 0))
and Type IN ('Employee', 'Refinance')

and Chan IN ('XM', 'BN', 'RS', 'MM')

and Seg IN ('Hoc','LeftOver', 'COnly')

View 4 Replies View Related

Using Dates In Criteria

Aug 31, 2007

I am just learning SQL server 2005 and I am having trouble with the sql statement of my sqlcommand. I am just trying to query for any ticket that was open yesterday. I need this to run daily
If I run the following it works
SELECT Assigned_Group,
Assigned_Technician,
Date_Created
From "Support Center Ticket" where "Date_Created" > '08/30/2007 00:00:00'
and division = 'Northern'

however when I change it
SELECT Assigned_Group,
Assigned_Technician,
Date_Created
From "Support Center Ticket" where "Date_Created" > convert(varchar, getdate()-1, 101) + ' 00:00:00'
and division = 'Northern'



SSIS package "Package_test.dtsx" starting.

Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.

Error: 0xC0047062 at Data Flow Task, DataReader Source [46]: System.Data.Odbc.OdbcException: ERROR [420] Driver]Unexpected extra token: (

at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode)

at System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method, Boolean needReader, Object[] methodArguments, SQL_API odbcApiMethod)

at System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method, Boolean needReader)

at System.Data.Odbc.OdbcCommand.ExecuteReader(CommandBehavior behavior)

at System.Data.Odbc.OdbcCommand.ExecuteDbDataReader(CommandBehavior behavior)

at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)

at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PreExecute()

at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPreExecute(IDTSManagedComponentWrapper90 wrapper)

Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "DataReader Source" (46) failed the pre-execute phase and returned error code 0x80131937.

Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.

Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (6856)" wrote 0 rows.

Task failed: Data Flow Task

Warning: 0x80019002 at Package_test: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

SSIS package "Package_test.dtsx" finished: Failure.

View 2 Replies View Related

Does It Matter If The Criteria Is In The FROM Or The WHERE?

May 6, 2008

I have a query that searches through a 4 million record table. The data is fed from the UNIX flat file systems so the data is not in optimal search format. So I created some views that massaged the data and then index them. I select and join the original table with the view, with NOEXPAND hint on the view. My question is this theory right: If I put the criteria in the FROM join part then it will make the join easier than if I put it in the where clause?

Example (any difference)
SELECT stuff1, stuff2 FROM UglyData u INNER JOIN MassageTable m ON m.RecNumber LIKE '112%' AND u.ID = m.ID
versus
SELECT stuff1, stuff2 FROM UglyData u INNER JOIN MassageTable m ON u.ID = m.ID WHERE m.RecNumber LIKE '112%'


THANKS!!!

View 3 Replies View Related

FilterExpressions With Multiple Criteria

Sep 10, 2007

I am creating a .aspx page that links with Miscrosoft SQL Server 2005 Express. It includes a GridView control that displays all the table data on the page. You can then select a record from the control (currently by clicking an image button to the left of each record- is there any way of selecting the record by clicking anywhere on the row? How would that be done?) and it displays the data in a detailsview control below where the data can be changed etc.
 The data is like a phonebook (Name, Telephone number, and some other misc fields) and the user should be able to search by either name or number to filter out the records shown in the gridview control. I have two textboxes for this, and I started with the name text box and it works fine. i.e. with one filterparameter and one filterexpression. So that if you just enter 'Da' it filters out the records displaying only those whose name starts with 'Da'.
 I have experimented but have found no way of including filter expressions to use the number as a search. I added the second filter parameter (under sqldatasource control so that:
 <FilterParameters>
<asp:ControlParameter Name="DestinationName" ControlID="txtName" /><asp:ControlParameter Name="DestinationNumber" ControlID="txtNumber" />
</FilterParameters>
But I don't know what to do for the FilterExpressions. currently I just have:
FilterExpression="DestinationName LIKE '{0}%'"
i have tried using "DestinationName LIKE '{0}%' OR DestinationNumber LIKE '{0}%'" but it requires that both text boxes have data entered.
 
What I want is something that allows the user to enter either a name or number or both (all or part of so don't need to enter in full name/number) and it filters out the records accordingly. I.e. if you enterd 'Dav' and '079' it would bring back all the records who had a name starting with Dav and a number starting with 079. However if you enterd just 079 then it should just bring back all records with numbers starting 079 whatever their associated name.
 
Thanks

View 9 Replies View Related

Query Criteria Format

Feb 9, 2004

I have a text box that is used to submit stock symbols that are to be saved in a sql table. The symbols are to be separated by a space or a comma (I don't know which, yet). I want to retrieve the symbols later to be used in a query, but I don't know how to get the symbols in the proper string format for the query, eg

The symbols are stored in the tables as: A B C D
The query string criteria would look like: IN('A', 'B', 'C', 'D')

The IN('A', 'B', 'C', 'D') citeria would be the values in the @Symbol variable in this SPROC

SELECT a_Name_Symbol.Symbol, a_Financials.Revenue
FROM a_Financials INNER JOIN
a_Name_Symbol ON a_Financials.Symbol = a_Name_Symbol.Symbol
WHERE (a_Name_Symbol.Symbol @Symbol)
ORDER BY a_Name_Symbol.Symbol

Is there a slick (ie easy) way to change the contents entered in the text box (A B C D) into IN('A', 'B', 'C', 'D') ?

Thanks,

Paul

View 1 Replies View Related

Select Same Field Twice For Different Criteria

Mar 11, 2005

I need a little insight on how to select the same field from the same table, but for different criteria.

here are example tables...

Categories
CATSUBCATNAME
10MainTitle
11SubTitle #1
12SubTitle #2
20Section
21Section #1


DataTable
CATSUBCATINFO
11Detail Information for subtitle #1
12Detail information for subtitle #2

desired result would be:
MainTitle, SubTitle #1, Detail Information for subtitle #1
MainTitle, SubTitle #2, Detail Information for subtitle #2


Select c1.Name, c2.Name, d.info
from DataTable d, Categories c1, Categories c2
where c1.CAT = d.CAT
and c2.CAT = d.CAT
and c2.SUBCAT = d.SUBCAT

View 1 Replies View Related

Using Results From One Query As Criteria For Next

Jan 4, 2006

I have a database with some over normalized tables in it.  The best I can do with one query is get the file ID.  In the second query I want to get all the file names, based on all the fileID's I got from the first query.  How would I go about doing this?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved