I am trying to load 14+ million rows from a text file into local Sql Server. I tried using Sql Server destination because it seemed to be faster, but after about 5 million rows it would always fail. See various errors below which I received while trying different variations of FirstRow/LastRow, Timeout, Table lock etc. After spending two days trying to get it to work, I switched to OLE DB Destination and it worked fine. I would like to get the Sql Server Destination working because it seems much faster, but the error messages aren't much help. Any ideas on how to fix?
Also, when I wanted to try just loading a small sample by specifying first row/last row, it would get to the upper limit and then picked up speed and looked like it kept on reading rows of the source file until it failed. I expected it to just reach the limit I set and then stop processing.
[SS_DST tlkpDNBGlobal [41234]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
-------------------------------- [SS_DST tlkpDNBGlobal [41234]] Error: The attempt to send a row to SQL Server failed with error code 0x80004005. [DTS.Pipeline] Error: The ProcessInput method on component "SS_DST tlkpDNBGlobal" (41234) failed with error code 0xC02020C7. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. ... [FF_SRC DNBGlobal [6899]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "FF_SRC DNBGlobal" (6899) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
------- After first row/last row (from 1 to 1000000) limit is reached: [SS_DST tlkpDNBGlobal [41234]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
--------------- When trying to do a MaximumCommit = 1000000. Runs up to 1000000 OK then slows down and then error. [SS_DST tlkpDNBGlobal [41234]] Error: Unable to prepare the SSIS bulk insert for data insertion.
[DTS.Pipeline] Error: The PrimeOutput method on component "FF_SRC DNBGlobal" (6899) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
---- When attempting all in a single batch: [OLE_DST tlkpDNBGlobal [57133]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Could not allocate space for object 'dbo.SORT temporary run storage: 156362715561984' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
Hi all, I got a unicode file source with this fields: -DT_WSTR (100) originally is DT_STR(100) -DT_WSTR (100) originally is DT_STR(100) -DT_NTEXT -DT_WSTR (20) originally is DT_DBTIMESTAMP -DT_WSTR (5) originally is DT_BOOLEAN
I export a Query result to a File (see above) ...as unicode TXT destination.
OK, now I must to re-import into another DB and here is my difficult...'cause the DT_NTEXT is HTML code and I got always this error: [Flat File Source [1050]] Error: The column delimiter for column "scheda" was not found. Scheda field is the DT_NTEXT.
Into connection manager area I modify the advanced tab for the set-up of my fields setting all to: Unicode string [DT_WSTR] with a variable of the len, but Try also to define everyone to the rigth type of the SQL destination like:
In every type of action I see no message alert and all seem to be good, but when I try to execute got always same error... So hope someone can help me... ----------- here first line of my UNICODE TXT source file ---------- "codven" "manufacturer" "scheda" "last_modified" "modificata" "CDGI2120" "Altri" "<datasheet><section ncellmax="1" id="1"><row order="1"><cell><![CDATA[Combat possiede mitragliatrici per intraprendere battaglie testa a ~testa del genere "spara o sei finito" in mezzo a territori ~butterati di crateri su carri armati del 23esimo secolo.~Caratteristiche:~* Cinque modalita' di gioco~* Tre tipi di carri armati~* Partita singola o in multiplayer~* Grafica in 2D, 3D]]></cell></row></section></datasheet>" "2007-12-11 13:02:26.290000000" "1" "CDGI2586" "Disney Interactive" "<datasheet><section ncellmax="1" id="1"><row order="1"><cell><![CDATA[Entra con Tigro ed i suoi amici nel meraviglioso Bosco dei 100 Acri aiutalo a cercare il miele nella natura incantata di questo fantastico mondo! ~~Il giocatore vestirÓ i panni di Tigro, il simpatico e buffo amico di Winnie The Pooh, il quale dovrÓ raccogliere quanto pi miele possibile, per rendere la festa di Winnie qualcosa di veramente speciale!!!]]></cell></row></section></datasheet>" "2007-12-11 13:02:26.290000000" "1"
Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
I have a ssis package where I need to have excel destination. In the Excel file, I need to have few rows with some text and then populate data below the text. One the text is like this:
Data as of: 08/25/2015
if the report ran today, then Data as of will have Yesterday. So, if the user opens that excel file after a week, then user should see same Data as of: 08/25/2015. not today()-day(1).
I was planing to handle on excel side with today()-day(1). but it only works the day it was run. Then the excel file is open after few days later, then it might as Data as of: 08/30/2015 which is not true. It should still stay Data as of:
08/25/2015 on what ever date the excel file is open. The SSIS package runs only once.
How do I handle this so that whenever user open the file, they will see Data as of: 08/25/2015. This is not a column in excel. It is like a description of data in excel.
I was wondering if there is a way to 'Move File' with the File System Task inside of a For Each Loop container but to dynamically set the Destination path variable.
Currently, this is what I have: FileDestinationPath variable - set to C:TestFiles FileSourcePath variable - set to C:TestFiles FileNameAndLocation variable - set to blank
For Each Loop Container Iterates through a folder C:TestFiles that has .txt files in it with dates in the file name. Ex: Test_09142006.txt. Sets the file path (fully qualified) to the Variable Mapping FileNameAndLocation.
Script Task (within For Each Loop, first step) Sets the FileDestinationPath to the correct dated folder within C:TestFiles. For example, if the text files I want to move are for the 14th of September, it takes FileDestinationPath and appends the date folder to the end of it. The text files have a date in the file name (test_09142006.txt) and I am picking this apart (from FileNameAndLocation in the For Each Loop) to get the folder date. (dts.Variables(User::FileDestinationPath?).Value = dts.Variables(User::FileDestinationPath?).Value & ? Month & _? & Day & _? & Year & ?) which gives me C:TestFiles 9_14_2006?.
File System Task (within For Each Loop, second step) This is where the action is supposed to occur. I want it to take the FileDestinationPath and move the FileNameAndLocation file (from the For Loop) into this folder for each run.
Now as for my problem. I want this package to run everyday but it has to set the FileDestinationPath variable dynamically according to that days date. Basically, how do I get this to work since I cant hard code the destination path variable from the start? I have the DestinationVariable on the File System Task set to the FileDestinationPath variable, after the script task builds it. However, using FileNameAndLocation as the SourceVariable on my File System Task tells me that the Variable FileNameAndLocation? is used as a source or destination and is empty.?
Let me know if I need to clarify further...I may be missing something very simple. Any help would be greatly appreciated!
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
1. Flat File Source 2. Conditional Split, Case Good = !ISNULL(KEY) Case Error = ISNULL(KEY) 3. Case Good -> Writes to Good Flat File (with timestamp in the title) 4. Case Error -> Writes to Error Flat File (with timestamp in the title)
Most job runs have no errors but the error file is created as a zero byte file anyway. If there are no error records I don't want the error file created. How might I accomplish this?
Problem: ColA (Source) Rounding error to PARTY_NO (Destination) I have a field of text of in a flat file that the flat file connection manager Source picks up correctly 70000893? However when it gets the OLE DB Connection Destination the data has changed to 70000896. Thats before its even Written to the database. The only clue that something is wrong in the middle is the great Data viewer shows the number as 7.000009E+07 Other clues looking at the data it appears there is a rounding error on only the number that dont end in 00 ColA (Source) PARTY_NO (Destination) 71167300 71167296 70329000 70329000 70410000 70410000 Any ideas people? Thanks in advance Dave
I am looking to import data into SQL Server 2005 using SSIS. I want to take data that is contained in a flat file and place it into the various appropriate tables in my system. The flat file contains nested data. For example...
Bob,Smith,555-5555,123~3.33|245~1.99,Active
So I want to build a package that brings in the records as follows
Client Table: First Name, Last Name, Phone, and Status (Bob, Smith, 555-5555, Active)
Order Table: OrderID, Amount (ID 123 @ $3.33 and another row ID 245 @ $1.99). If possible I would also like to tie the orders to the client record that was inserted.
My first question is if SSIS supports nested fields as in my example. Can it break a file by commas, then within a field by other delimiters? If so how do I do this, and if not what is the recommend way to accomplish this sort of task.
My second quesiton is if it can do that, can it tie the Client and Order data on the fly?
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
Is it possable to have control which name the flatfile has? F.ex. have the same process created files with the name: filename_2008-01-01 filename_2008-01-02 filename_2008-01-03
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
Hi there,I have a data manipulation process written in a Nested Stored procedurethat have four levels deeper. When I run these individual proceduresindividually they all seems to be fine. Where as when I run them alltogether as Nested proces (calling one in another as sub-procedures) Logfile is growing pretty bad like 25 to 30GB.. and finally getting kickedafter running disk space. This process is running around 3hrs on a SQLserever Standard Box having dual processer and 2gb ram.This procedures have bunch of bulk updates and at least one cursor ineacch procedure that gets looped through.I was wondering if anybody experienced this situation or have any clueas to why is this happening and how to resolve this?I am in a pretty bad shape to deliver this product and in need of urgenthelp.Any ideas would be greatly appreciated..Thanks in advance*** Sent via Developersdex http://www.developersdex.com ***
Hi, I am exporting a table to an excel format. The package should change the name of the destination file everytime the package is executed(preceded by date). I need to deploy this urgently.
Hi, I am new to SQL Server. Trying to convert a pc sas program to a SQL Server 2000 DTS package. Need fixed format comma delimited destination text file from a DB2 data source. Problem: SQL wants to make financial field 19 bytes long but I want it to be 12. Tried casting as a DECIMAL(7,2) but SQL still wants it to be 19 bytes long. Tried converting to CHAR but then it is still left-justified. I need decimal to be in the third byte from the right. Is this possible?
I try to use Data Transaction Service (SQL Server 7) to copy information from an Sql Server Table to an text file (fixed field). When I run the process, no problem, the text file is created and a Ok message appears. But when I look in my text file, every time a field was NULL or empty in the source table, the following fields are not aligned !
I'm trying to output the results of a query straight into a raw text file. The problem I'm facing is that the tool seems to write some unwanted characters at the top of the file and within it. For example, I get the name of the column that was used as input at the top of the text file:
[] [] <<name of column>> [] []
I need to have a clean file containing strictly the results of the query.
Everyone thinks that CSVs are awesome to transport data. I mean after all, SSIS defaults to Comma Delimited files. Even Excel defaults to it. Microsoft is supposed to be our leader! They should get this right. And get the terminology correct too. How many people describe the file as comma separated? It's delimited! Even SQL server calls it delimited by the "delimited" drop down.
CSVs suck and i will tell you why:
When you transport any text field (especially Address) it has the possibility of containing a comma. This causes data to be parsed into the wrong fields. Why in God's grace would you EVER get in the habit of choosing a delimiter that SOMETIMES doesn't work?
I'll tell you a little short story:
I have been waiting (at work) for like a month for a guy to export data and give me this file. Well today i finally got that file. He was in a hurry and used the Defaults to export this file. I don't blame him for being in a hurry and using the defaults. Well the defaults made the import NOT work because the data parsed into the wrong columns. Comma delimited would work if there was a text qualifier. But the default is comma delimited and NO text qualifier. What idiot thought that would be good. Or it was the separation of duties that eff'd this one up? Who knows?
I am using SSIS to create a weekly data extraction that will be emailed to an external agency. I can extract the data, create the file and email it without any problems but I want to compress and encrypt it before I send to give some measure of protection to sensitive data it would contain.
If I did this manually, I would simply use Winzip to compress and encrypt the file to be sent. How can I achieve a similar result programtically?
I have created a package and when i was trying to configure a flat file destination, i am getting the following error:
===================================
The component could not be added to the Data Flow task. Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
===================================
Error at Extract Test Flat File [DTS.Pipeline]: The module containing "component "" (245)" cannot be located, even though it is registered.
===================================
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------ Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties() at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError)
Say I am going to write to a different Flat File for every product. So if there are 10 products in the data. There should be 10 Flat Files. Also the file name should include the Product Name And Product ID.
It is being done in a single Data Flow Task.
Right now the Property Expression for the File Name is which is not working)
I have been searching for the answer to something I thought would be easy to find. But, no luck.
I need to load a csv file into a SQL Server table. The rub is that I need to also parse the filename for a couple of pieces of data also. Example filename: c:importCustomerX_LocationY_1234.csv
For each record in the csv file I will call a stored procedure the has a parameter for each column in the file plus a parameter for the customer name and a colummn for the location name.
I assume that I will need to use a Script Component to parse the filename fro the information. What is not clear is how I get the filename from the csv connection object and how to get to result of the script component to the inputs of the OLE DB command component that I am using to call the stored procedure.
I have succeeded in using the Derived Column component to put constant values in for the customer and location. But, I cannot figure out how to get to the next step of deriving those two values from the input filename.
I would like to know if there is any trick to convert numbers to csv files. I don't have any control to format the numbers.
Source: Sql server
for example:
select cast( 1 as float)/ cast(201 as float)
Destination:CSV file
the output of the file is 4,9751243E-3
i don't want to have scientific notation on the number. I want the result to be 0,00497512437810945. how can i do it?
I tried to change the type of destination columns to String or numeric but nothing works. what is the influence of changing data type in the destination columns e the output to files?
I tried using convert but with the same results.
Can it be because of local settings or something else?
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
I am scripting a DTS Package using VB. The problem I am having is that I get the following error when I execute the package from Visual Basic:
Step Error Source: Microsoft Data Transformation Services Flat File Rowset Provider Step Error Description:Incomplete file format information - file cannot be opened.
In the DTS Designer when I open the DataPump Transformation and click on the Destination tab I am prompted With the Define Columns dialog. I define the columns and click execute. The package works properly after doing this when executed from Enterprise Manager. Does anyone know how to script the file definition creation??? I have searched high and low through BOL and other resources and am not finding anything. I doesn't seem like it should be this hard to figure out so, maybe I am missing something.
