SQL Server Could Not Configure 'ServerInstance' As A Distributor.

Jan 23, 2006

I am working on setting up our new SQL Server 2005 servers. One of
them will eventually be our Replication Distributor. However when I
attempt to set this up within the wizard, I get the following error:


------------------------------
TITLE: New Publication Wizard
------------------------------
SQL Server could not configure 'ServerInstance' as a Distributor.
------------------------------
ADDITIONAL INFORMATION:

Property LoginSecure cannot be changed or read after a connection
string has been set. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
BUTTONS: OK
------------------------------


In the "Specify the Domain or Machine account under which the Snap Shot
Agent will run" page, I designate a Windows Auth. domain user; The same
user that is used to start SQL Service. Any idea as to why I am
getting this error?

View 1 Replies


ADVERTISEMENT

Cannot Configure Server As A Distributor

Jun 7, 2000

Hi all,

I'm having a problem configuring one of my SQL servers
as a distributor. I've done it successfully on another
server, so I know that it's nothing procedural and there
must be an issue with the way the server is set up.
When I click 'finish' on the Configure Publication and
Distribution Wizard, I get the following error message:

Enterprise Manager could not configure 'ABEL' as the
distributor for 'ABEL'.

Error 20017: Cannot add the remote distributor at this time.
Make sure that the local server is configured as a Distribution
Publisher at the Distributor.


Can anyone point me in the right direction? I'm fairly new
to SQL Server, so feel free to explain things in a
condescending manner. ;-)

View 1 Replies View Related

SQL Server Could Not Configure 'instance' As A Distributor.

Nov 26, 2006

SQL Server could not configure 'SQL01' as a Distributor. (Microsoft.SqlServer.ConnectionInfo)

------------------------------
ADDITIONAL INFORMATION:

Property LoginSecure cannot be changed or read after a connection string has been set. (Microsoft.SqlServer.ConnectionInfo)



I have had a good look through the forums and have found several ideas about permissions on the DATA folder to no avail. I have also not changed the sa user it is still sa. Unfortunaley all the things I have found haven't worked. Have you got any ideas?

They would be greatfully received.

Ben

View 4 Replies View Related

Could Not Configure Server As A Distributor (SQL 2005)

Jul 21, 2006

Arghh ...

I have searched all the newsgroups and applied or tried all the suggestions, with no success. I have completely uninstalled and reinstalled SQL 2005.

Can someone point me in the right direction? Here is the error I receive when I try to 'Configure Distribution' in the SQL 2005 management studio.

Any/all help is greatly appreciated.

Tery
PS. The destination path mentioned in the error is definitely a correct path.



TITLE: Microsoft.SqlServer.ConnectionInfo
------------------------------

SQL Server could not configure 'LAPTOP' as a Distributor.

------------------------------
ADDITIONAL INFORMATION:

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

An error occurred during the execution of xp_cmdshell. A call to 'CreateProcess' failed with error code: '5'.
Invalid destination path C:Program FilesMicrosoft SQL ServerMSSQLData.
Changed database context to 'master'. (Microsoft SQL Server, Error: 15121)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=15121&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------


View 4 Replies View Related

SQL Server Could Not Configure 'serverdados Epl' As A Distributor. ERROR 15466

Aug 16, 2006

I have completely uninstalled and reinstalled SQL 2005 in same computer name

Can someone point me in the right direction? Here is the error I receive when I try to 'Configure Distribution' in the SQL 2005 management studio.

TITLE: Microsoft.SqlServer.ConnectionInfo
------------------------------

SQL Server could not configure 'serverdados
epl' as a Distributor.

------------------------------
ADDITIONAL INFORMATION:

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

An error occurred during decryption.
There is no remote user 'distributor_admin' mapped to local user '(null)' from the remote server 'repl_distributor'.
Changed database context to 'master'. (Microsoft SQL Server, Error: 15466)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.2153&EvtSrc=MSSQLServer&EvtID=15466&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------




Any/all help is greatly appreciated.

View 4 Replies View Related

Transactional Replication Setup (SQL Server Could Not Configure 123456 As A Distributor

Jul 17, 2007

Hello



I have server "123456" SQL 2005 On clustered environment. I added permissions to snapshot folder, it is on sharing for both nodes.



I got error during the set up as:



Microsoft.SqlServer.ConnectionInfo



Additional Information:

An exception occurred while executing a TSQL or Batch(

Microsoft.SqlServer.ConnectionInfo)



An error occurred during the execution of xp_cmdshell. A call to "Create Process" failed with error code 5



Destination path d:Microsoft SQL ServerMSSQL.1MSSQLData is not Valid. Unable to list directory contents. Specify a valid destination path

Changed database context to 'master' (Microsoft SQL Server, Error 15121)



The datafolder exists, sql cluster service account from domain added in to snapshot folder, administrators access also on this folder.



Please advice how to troubleshoot this issues. Thanks, Jay

View 1 Replies View Related

Configure Distributor Error

Jan 4, 2006

I am trying to "Configure Distributor" prior to setting up the publications.  When I go through the wizard, at the very last step I get the following error:

******************************************************************************************

SQL Server could not configure 'serverName' as a Distributor.

------------------------------
ADDITIONAL INFORMATION:

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

Cannot find the principal 'sa', because it does not exist or you do not have permission.
'distribution' is not configured as a distribution database.
Changed database context to 'master'. (Microsoft SQL Server, Error: 15151)

******************************************************************************************

I have renamed the 'sa' account.  Is there a place I need to change it to the new name for the distributor to work??  Thanks.

View 1 Replies View Related

How To Configure Distributor Thread For Being Up While Replicated Database Is Down

May 1, 2006

Hi



I often deal with a problem when replicated database is down due to
electric outage or any other scheduled type of downtime. Primary
database is up but distribution agent is going down 'after 10 attempts
to connect to replicated database'. That's the problem I think because
not only distribution agent goes in undetermined state and I have to
restart sqlagent service, but I need to go through whole process of
snapshot and applaying it to replicated db. I would like it to
accumulate transactions in distribution database and once replicated db
is up - distribute them.

I wonder if anybody can tell me how to configure distribution thread so
it does not go down after 10 unsuccessfull attempts but stays for day
or two.



Thank you, Gene.

View 4 Replies View Related

Error When Attempting To Configure A Local Distributor

May 26, 2007

i'm getting the following error message when i attempt to configure my server as a local distributor:



TITLE: Connect to Server

------------------------------

Cannot connect to 9A6375C3046246B.

------------------------------

ADDITIONAL INFORMATION:

Failed to connect to server 9A6375C3046246B. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)



this error is occuring despite the fact that i have the server configured to allow remote connections. can someone please help me troubleshoot this error? thanks.

View 11 Replies View Related

The Process Could Not Connect To Distributor 'Distributor-name'. 20084

Feb 8, 2006

Precedents


Windows 2000 Server

1 SERVERNAME
SQL Server 2000 - 8.00.818 (Intel X86) May 31 2003 16:08:15
Enterprise Edition on Windows NT 5.0 (Build 2195: Service Pack 4)

1 SERVERNAMEINSTANCE
SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38
Desktop Engine on Windows NT 5.0 (Build 2195: Service Pack 4)

IIS 5.0

SQL Server CE 2.0 (sp3a)

Merge replication previously working fine.
The problem

After migrating MSDE from sp3a to sp4 (in order to fix CE replication bug) I can't sync to MSDE.
I got the following error code: [29045]->[Initializing SQL Server Reconciler has failed.] so I've looked into SQL Server CE log file and I've found the following error message:

2006/02/07 19:44:23 Thread=9A8 RSCB=4 Command=SYNC Hr=00000000
The process could not connect to Distributor 'Distributor-name'. 20084

2006/02/07 19:44:23 Thread=9A8 RSCB=4 Command=SYNC Hr=00000000
Data source name not found and no default driver specified

I've already tried without success

Uninstalling all SQL Server 2000 (EE) instances (except for the "no instance")
Unistalling and re-install MSDE (sp4)
Re-registering sscerp20.dll.
Rebooting server.
Restarting IIS.

Any ideas?
Sebastian

View 3 Replies View Related

Get ServerInstance Name

Oct 26, 2006

I can't find this anywhere in the thousands of objects in SSIS. So I thought I would ask.

I have a situtation where I want to retrieve the serverinstance name of the SSIS job is running on. I have multiple servers and instances and I want to send emails like "Failed see serverinstance - job name".

Any ideas?

Thanks

View 5 Replies View Related

Specify [serverinstance] In Select Statement

Mar 11, 2008

Hi, what is the different when I execute

select count(*) from [servernameinstance].database1.dbo.tablename(nolock)
and
select count(*) from database1.dbo.tablename (nolock)

for the first code, I will get error
Msg 4122, Level 16, State 1, Line 1
Remote table-valued function calls are not allowed.

How can I use nolock with sever name and instance specified in the select statement??

View 9 Replies View Related

How To Create A New Serverinstance But With Old Datafiles?

Jul 23, 2005

Hi groupI want to make a new serverinstance, but based on some old files from aprevious instance I once had from a SQL I scrapped.I only know how to use the SQL Server enterprise manager console, and Ihaven't found any tools in there to do that.Any suggestion will be more than welcome.Adrian

View 1 Replies View Related

After Install, Running Sqlcmd -S ServerInstance Fails

Jan 23, 2007

I'm trying to figure out how to set up SQL Express so I can start learning SQL. I've installed SQL Express, but when I type "sqlcmd -S ServerSQLExpress," I receive the following error:Microsoft Windows XP [Version 5.1.2600](C) Copyright 1985-2001 Microsoft Corp.C:Documents and SettingsUsername>sqlcmd -S ServerSQLExpressHResult 0xFFFFFFFF, Level 16, State 1SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.

View 9 Replies View Related

Server Is Not Configured As A Distributor

Jul 13, 2007

Hi this is SQL 2000 but I couldn't see a forum for SQL 2000 replication.

I have set up merge replication. Between a server and an msde laptop.

The sync works fine within the network but when the user goes home and vpn's into the network and tries to replicate they get an error message that says:

"...server is not configured as a distributor" I find this strange because the replication definitely works within the network.

View 1 Replies View Related

Setting Up Replication On SQL Server 2000 Using Distributor Running On SQL Server 2005

Jul 6, 2006

Hi

I have a setup where I need to replicate the database which is actually subscribing from another database. The current setup is all in SQL Server 2000. I need to now setup a Distrbutor on a SQL server 2005 and publish the database using this distributor to another server on SQL server 2000.



Has anybody done this before. If yes what will I need to check. Can you please let me know :-



1) SQL Server 2000 which SP should be installed to support this enviroment.

2) SQL Server 2005 which SP should be installed to support this environment.

3) Any thing that I need to look out for.



Thanks for any inputs on this.



Regards

View 3 Replies View Related

Need For Distributor Server In Existing Replication Setup

Dec 4, 2004

We have a setup with one Publisher Server and 15 Subscribers with merge replication configured for all subscribers. The current Database size is approximately 3 GB expected to grow to 10 GB in next 1 year. We wanted to know what benefits would we incur if we add an additional seperate distributor server (hardware box). Also, what is the approx. size of a database where a seperate distributor server (hardware box) is recommended.

Thanks in advance

View 4 Replies View Related

Cannot Connect To Remote Distributor -- Linked Server Error

Mar 8, 2007

I have 2 servers: #1 -- SQL 2005 SP1 publisher ; #2 -- SQL 2005 SP2 subscriber

originally I had #1 as pub and dist but dist but killing my CPU so I was in the process of moving the dist to #2... Got it all configured and when I tried to add #2 as a dist for #1 it fails when I get to the administrative password screen... It give me an error about how it cannot connect with the given password but under that is says linked server failed.

Since it mentioned linked server I tried to connect via the previous linked server to #2 and it failed... I cannot connect to #2 anymore from #1. I can login directly to #2 and I can use osql to connect to #2 but linked server does not work. I tried all drivers and many configurations...

Any ideas??

View 1 Replies View Related

Does The Transaction Log On A Publisher SQL Server Get Truncated When The Database Is Backed Up, But The Distributor Is Down?

Jul 23, 2005

Hello All,The setting is SQL server 7, on Windows NT.If the distributor can not access the log on the publisher database ( butsubscribers are not deleted yet), will the full backup of the publisherdatabase truncate the transaction log? My guess is, it will not truncate thelog.Can any one confirm please?Thanks,Mokles

View 2 Replies View Related

What Are The Implications For Changing The Remote Distributor SQL Server Service Details

Mar 1, 2006

Hi,

I am replicating a couple of SQL2K databases via transactional rep and remote 2K distributor to 1 SQL2K5 database.

I want the distributor to email me when/if any of the agents fail etc. In order to set this up, I think that I need the SQL Server service to use a domain account (from error messages that I have been getting). It is currently using a local system account (it was a test box in a previous life).

I have tried this briefly, and found that it lost the publisher details in the replication monitor. Can anyone tell me what the implications for changing the SQL server service user and password are? Am I going to have to tear down and rebuild replication? The SQL Server Agent is fine - I am trying to get the two services in sync.

View 4 Replies View Related

[REPL] Server Config For Distributor Server?

Jun 13, 2006

We are going to have two SQL 2000 Servers with a SQL 2005 distributor server that will handle 1 way transactional replication. What kind of server should I ask IT to spec out that would satisfy an installation such as this?

Our production DB is 30GB and we are replication about 60% of the data to another server.

View 1 Replies View Related

How To Configure A2K To SQL Server 7.0

Mar 19, 2001

Hello All,

We've A2k db which we plan to migrate to SQL 7.0 very soon. Though am familiar with upsizing wizard BUT don't know how to configure Access forms, reports etc. to talk to SQL back end tables. So that information entered via Access forms can be stored in sql and reports can be generated using sql tables..

Thanks in advance..

View 1 Replies View Related

How To Configure SQL SERVER 6.5

Oct 27, 1998

What are the steps in configuring sql server 6.5 to have excellent performance?
what are the items that I should think of and based on what condition I can set up the configuration?

Ahmed

View 1 Replies View Related

How To Configure Sql Server

Jul 20, 2005

Hi All,Here is my questionWhat might you configure on a SQL Server so that a Web server runningon the same machine, with limited memory, will continue to performoptimally?Thank youRaju

View 1 Replies View Related

MSSQL Server 2000 Error Setup Fail To Configure Server

Nov 14, 2006

I have searched and could not find an answer for this one I read log and it said
Starting Service ...

SQL_Latin1_General_CP1_CI_AS

-m -Q -T4022 -T3659

Connecting to Server ...

driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master

[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master

[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master

[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

SQL Server configuration failed.

how do I fix this?

View 7 Replies View Related

To Configure IBM DB2 As Linked Server

Mar 19, 2003

I have a SQL Server version 7.0 and want to configure IBM DB2 on OS 390 as a linked server on it . I installed DB2 clients on the SQL Server and thru DB2 Connect ,I am able to access the mainframe data using the clients . However I am having problems configuting the Mainframe server using IBM DB2 OLE DB Driver .I am not sure if we need to use Microsoft OLE DB Driver .

View 3 Replies View Related

Configure SQL Server 2000 In SAN.

Nov 28, 2003

Our company is going to use SAN (HP or EMC or Fuji) for SQL Server failover rather than MSCS. So far, DBA has no knowledge of SAN.

Would you please to tell me, how does SAN depend on SQL Server? I assume SAN software can make disk failover if there is a network, disk or OS failure in primary node. If SQL Server or SQL Agent is failure, can SAN software detect it? (or can SAN disk failover depend on SQL Server or SQL Agent services?)

Please let me know where can I find any configuration document regarding SAN for SQL Server failure. I had spent 2 days in HP and EMC wrbsite and found nothing.

Happy Thanksgiving.

Mary

View 5 Replies View Related

How Too Configure Server And Client

Mar 10, 2001

hi there!
i have been trin to configure my network for the sql server 6.5 but in vain.Actually
i have two pc in the network , one is server and the other is workstation.i install
SQL server on the NT server and then install the sql client oon the workstation but i
donno how to configure that client for the server.
so i just want u leet me that what particular steps should i follow to make that
network work properly for the sql server 6.5. i just wanna use sql server 6.5 in a
simple situation. i am not an advance user of the sql server 6.5.
i will be greatful to GOD if uu help in this problem.
sincerely,
romanafroz@hotmail.com

View 1 Replies View Related

Configure SQL Server Email

Oct 4, 2005

Hello, everyone:

I want to create a stored procedure to execute validation and send results to clients. When I did testing to send email by:

EXEC master..xp_sendmail
@recipients='you@you.com',
@message = 'Validation Finished',
@subject = 'foo was fired.'

I got error loke:

Server: Msg 18030, Level 16, State 1, Line 0
xp_sendmail: Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client.

How to configure Outlook and SQL Server Email next?

Thanks

ZYT

View 1 Replies View Related

Configure SQL Server 2000.

Feb 13, 2004

Hi all,
Please, tell me how to configure database SQL server 2000 for a large system, and make it uninterrupted run.
Thanks

View 6 Replies View Related

Configure SQL Server Client

May 11, 2004

Hi,
I have installed MS SQL Server on a win XP and a MS SQL Server client on a win2000. I don’t know how to configure this client to access the server remotely.
Any pointer?
Thanks.
I am very new to SQL Server.

View 7 Replies View Related

How To Configure SQL Server 2005

Dec 17, 2007

Hi All,
I am new to SQL server 2005. I have installed SQL server 2005 which came along with the visual studio 2005 package. Now i could see the visual studio 2005 in the installed programs list.
I really dont know how to configure the the installed SQL server. how to create tables and veiw. frankly speaking i could not see where is the head and tail.

To be straight forward, i havent used any database to a great extent. earlier during the starting of my career, i developed a small application using VC++, which used to interact with the DB server on a very minor scale; whenever i wanted to create a table for used to do it with sql client which was also installed in my machine.

currently i am againg devoloping a small apliccation using VC++, this time for devlopment and testing purposes, I have SQL server 2005 installed in the same machine which i am using for development.
Now as i said eralier i am not even aware how to configure, how to start creating table...... :-(

all i have done is i have installed SQL server 2005 and all i could see is SQL Server 2005 listed in the installed programs list :-(
some one please help me.... :-(

I couldnt even create a DSN

Thanks and Regards
RK

View 1 Replies View Related

Configure Report Server

Jan 25, 2008

When I opened "Reporting Service Configuration Manger" from SQL server configuration tool list, The "Report Server Installation Instance window came out. It showed my local machine name on the field of Machine Name. When I click "Find" button, a message box came out. It says: "No report server were found on the specified machine. Details: Invalid namespace

What is the problem and how to solve it.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved