SQL Server Express Starting As NETWORK SERVICE!!
Apr 28, 2006
Hello All,
I am installing SQL Server Express from the command line using the following parameters
INSTANCENAME=MSSQLSERVER ADDLOCAL=ALL SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0 SAPWD=TEST
After the install is done I start the service form the command prompt using
start mssqlserver
I see that the SQL Server service has started under NETWORK SERVICE account!!! when the documentation i Read on MSDN says it starts in Local System account
Can any one explain me the possible reasons
Thanks
View 8 Replies
ADVERTISEMENT
May 18, 2007
Hello,
I had created a windows service using C#. I set its Startup Type as Automatic but it is not getting started automatically when my System Starts.
View 3 Replies
View Related
Oct 4, 2007
I am trying to start ms sql server 2005 express as a network user from originally starting as local system. I cannot start the service.
I have given this network user administrator access to sql express from the sql server surface area configuration "Add New Administrator". I have went into the local users/groups and added this network user to the 3 security groups
SQLServer2005MSSQLServerADHelperUser$SQL1
SQLServer2005MSSQLUser$SQL1$SQLEXPRESS
SQLServer2005MSSQLBrowserUser$SQL1
I receive one alert int he event logs/application
EventID: 26010
The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
I receive five errors in the event logs/application
EventID: 26014
Unable to load user specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x80
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x1
EventID: 17826
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately prceding this one in the error log.
EventID: 17120
SQL Server could not spawn the FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I don't recall assigning any sql specific certificates. The reason I'm trying to run this as a network user is because an application on a remote windows server requires it.
After starting the service back running as local system as it was before, I went into the
SQL Server Management Studio Express and edited the properties for this new network user I wish to run the service as. I gave him full access including checking all grants in securables.
I now see a bit of a difference in the event logs with these errors.
EventID: 17058
initerrlog: Could not open the log file 'c:Program FilesMicrosoft SQL ServerMSSQL1MSSQLLOGERRORLOG.' Operating system error =5(Access is denied).
I saw a notification when changing the sql server service's logon that the new network user has been granted the log on locally right.
The second and last new error is
EventID: 17053
UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered.
View 6 Replies
View Related
Feb 1, 2007
When our rep distribution services time-out (several times a day) some dba's just restart the service while others restart the rep job which starts the service. Are there any differences between these two methods? Does restarting the service inherit any changes made to the job's attributes?
Thanks!
View 1 Replies
View Related
Oct 26, 2015
I'm running SQL 2012 on a Win 2012 VM and the SQL server shuts down automatically after starting the SQL Server & SQL Server Agent Jobs.
View 9 Replies
View Related
Jul 23, 2005
Hello there,This is a bit of strange one.My local version of SQL Server fails to start when I boot yet if Istart Enterprise Manager its started and working fine. ISQL or QueryAnalyzer is also not working.If I try and register the server by another SQL Server is not there. Methinks that the named pipes might be a bit broken but would appreciateany advise from people.ThanksGinters
View 2 Replies
View Related
Sep 25, 2006
Hi,
Anybody kindly help me.
We have windows server 2000 and sql server 2005 on the same machine with 15 clients. There was a power failure. The sql server is automatically stopped. When we tried to start the service we are getting the error as action failed please check application event log for errors.
This has happened for the 2 times, kindly tell me why this happens and what precaution we can take and is there any setting we are missing. Since I am newbie to sql server and windows server I am unable to solve this problem.
Thanks
View 13 Replies
View Related
Mar 10, 2004
I have a Win 2003 server running 3 instances of SQL 2000 Enterprise.
The problem is I can only start 2 of the 3 Job Agents at a time, as the 3rd gets stuck in a starting state.
Has anyone struck this problem before?
Thanks.
View 8 Replies
View Related
Mar 15, 2007
I upgraded my SQL 2005 Workgroup 2005 to SP2 and subsequently could not get the SQL Server service running. Turns out this was a problem because I had created separate folders for my data and log files. The distmdl.mdf and mssqlsystemresource.mdf files were in my data folder and distmdl.ldf and mssqlsystemresource.ldf were in my log folder. During SP2 upgrade a new distmdl.ldf and mssqlsystemresource.ldf were created in my data folder. I deleted the distmdl.ldf and mssqlsystemresource.ldf files in my log folder and then moved the newly created ones in my data folder into the log folder and all is well now.
Just a heads up!
--Greg
View 1 Replies
View Related
Aug 22, 2007
Hi all,
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
Thanks in advance,
Scott Chang
View 6 Replies
View Related
Sep 19, 2007
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang
View 3 Replies
View Related
Aug 10, 2006
I have upgraded a SBS 2003 MSDE database (instance MSSQL$SHAREPOINT) to SQL Server 2005 Express Advanced Edition. This worked without a problem even when I enabled all the options for the upgrade including Full-text search.
I now want to have Full-text search on this instance of SQL 2005 with database name of STS_EVEREST_1.
I first tried to use the T-SQL command of "CREATE FULLTEXT CATALOG BBVisionCatalog AS DEFAULT;"
I now know that the original database was created under SQL 2000 and therefore I needed to use SQL 2000 commands. So I used the following script:
USE STS_EVEREST_1
EXEC sp_fulltext_database 'enable'
EXEC sp_fulltext_catalog 'BBVisionCatalog', 'create';
It produced the following ERROR messages:
(1 row(s) affected)
Msg 7609, Level 17, State 2, Procedure sp_fulltext_database, Line 46
Full-Text Search is not installed, or a full-text component cannot be loaded.
I checked to see if the Microsoft Search Service was running. It was running.
Anyone know how I can fix this?
Regards
Rolf Pfotenhauer
email: rolfpf@yahoo.com.au
View 9 Replies
View Related
May 15, 2007
Microsoft recommends that you do not use the Network Service account to run the SQL Server service (see http://msdn2.microsoft.com/en-us/library/ms143504.aspx).
Can anyone tell me what the drawbacks are of doing this?
View 1 Replies
View Related
Jul 2, 2007
Hi,
I installed SQL Server Studio MAnagement Express, and for some reason - I can't login to the server database engine. I try to enter '.SQL EXPRESS' in the 'connect to server' form, but keep getting error. I understand I have to start the service first, going into Start>All ProgramsMicrosoft SQL Server 2005>configuration Tools> -here I got nothing but 'SQL Server Error and Usage Reporting'... I assume something is missing here for controling the server, correct ?
View 1 Replies
View Related
Oct 29, 2006
Hi,
im redeveloping my application from using access 2000/DAO to VS2005 professional/SQL server express using ADO.NET (i use VB), and just want to make sure i'm on the right lines about using sql server express 2005 on a network. i've spent hours reading every concievable article on the web after failing to create a database on a network drive, and ive just come across a good artricle here but want to be sure i understand what i need to do properly.
am i correct in the following please:
i only need 1 instance of SQL Server installed on the server, local PC's that will be using my SQL database do not need SQL server/management express installing?
obviously the database resides on the same server as SQL server 2005 on the network.
i dont need any additional software/drivers etc installing on the local pc's (as a miniumum all local pc's will be running w2000 or XP)
In my local pc's, i set the connection string to point to the instance of SQL server on the server PC
i need to enable the tcp/ip connection stuff on the server.
all local PC's need .NET framework 2.0 installing, as well as the server.
as an additional question, what if an end user has another SQL version installed already, say the enterprise version? is it recommended i link my app. to that, or still use SQL express for my own purposes, and are there any issues with having both database engines existing on the same server?
is there a limit on the number of concurrent users. i have read in some places that there is a limit of 4 or 5, and elsewhere that there is not.
is there anything else i should consider?, and any other help or advice is welcome.
Many thanks in advance
Bob
View 3 Replies
View Related
Mar 11, 2008
I installed SQL Server 2005 on Windows 2000 SP4 Machine. All services except the Reporting Service is running in the PC. On trying to start the service a message saying "Could not Start reporting Service. No error reported....."
Uninstalled SQL Server2005 and installed again. At present no service pack installed. Please Help
View 1 Replies
View Related
Mar 13, 2008
Is there a limitation in sql server 2005 express that it does not accept connections via the network? I am trying to develop a web application running the web server as a VM but I can't connect to the sql server on the host machine. Similarly, I can't create an ODBC connection on the VM, but I can on the host. I could install sql express on the VM, that is probably the next thing I'll try.
View 2 Replies
View Related
Apr 24, 2008
hello everyone,
I wonder if you can help me with a problem I have trying to support a web based application that uses SQL 2005.
The problem is that the application developers tell me that it is neccessary to stop and restart the SQL service as part of the troubleshooting process when their application stops working. Unfortunately, the customer has our application database on a clustered SQL instance that is used by other applications so they cannot just stop and restart the SQL service because this will have a major impact on all the other instances...
Is there another way that would effectively do the same thing as stopping and restarting the SQL service? I have read that dettaching and re-attaching might do the same but application developers say onlt stopping/restarting services is sufficient to break the connection with the application.
Any advice would be really welcome as I am completely new to SQL and struggling with this!
Many thanks, Nick.
View 5 Replies
View Related
Jul 23, 2005
Folks,We're implementing a software based mirroring solution. This solutionrequires that the SQL Server service on the target server be stoppedwhile data is being replicated from the source server.One problem we encountered while testing was that the SQL ServerService on the target server was inadvertantly started when usersselected that server in Enterprise Manager. Is there any way to keepthe service from starting through Enterprise Manager?Thanks
View 2 Replies
View Related
Dec 5, 2006
Hi
There is a service from SQL Server 2005 that "listens" to the network, if the network is down, all data gets saved within the local instance of the SQL server 2005. And when the network becomes available, the local instance of the sql server will automatically "feed" the local records to the central SQL server 2005.
What is that feature called?
View 3 Replies
View Related
Dec 7, 2006
Hi,
how to build a sql server instance in the network using sql express?
thank you.
View 7 Replies
View Related
Oct 18, 2006
I am trying to attach a network database to my sql server express
After some reading I "Enabled" tcp/ip, named pipes, and shared memory in sql server confiuration manager.
But when I go to "Attach Database" in Sql Express managemnent studio. It does not show the network drives much less allow me to attach anything on a network drive.
What am I missing here?
If I install sql server on the network machine will my local Sql express recognize it?
View 3 Replies
View Related
Feb 2, 2007
I have installed SQL Server Express and I can connect with it locally using "localcomputernameSQLEXPRESS". It is configured for remote connection and for some reason, when I browse for this instance on the Network Server, it does not appear in the list. I have unistalled/installed it several times and still I cannot see this instance on the SQL Network server list. Can anyone help troble shoot this frustrating issue...
Thanks!
SAM
View 1 Replies
View Related
Jul 27, 2001
I'm not sure i was clear the first time. When the MSSQLServer Service is stopped and started, it stops the SQLServerAgent Service also. But when the MSSQLServer Service is started, it DOES NOT start the SQLServerAgent Service. I don't think this is configurable, so I was wondering if someone had a workaround (.bat file, service dependency, etc.).
TIA,
Mike
View 1 Replies
View Related
Dec 11, 2006
I installed SQL Server 2005 Integration services on Windows XP machine. Then I went to the SQL Server Configuration Manager and tried to Start the SSIS service. The "Log On As" value is "NT AUTHORITYNetworkService". But I get the follwoing error:
The request failed or the service did not respond in a timely fashion. COnsult the event log or other applicable error logs for details.
Event Log details:
------------------
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I tried running the service using the "Local Service" and the "Local System" accounts also, but am still encountering the same error. What do I do...
View 2 Replies
View Related
Apr 23, 2015
One server, a part of a 2 node always on cluster, had problems, I had to restart.
I'm getting this error for example now:
Error: 49910, Severity: 10, State: 1. (Params:). The error is printed in terse mode because there was error during formatting. Tracing, ETW, notifications etc are skipped.
+
SQL Server was unable to run a new system task, either because there is insufficient memory or the number of configured sessions exceeds the maximum allowed in the server. Verify that the server has adequate memory. Use sp_configure with option 'user connections' to check the maximum number of user connections allowed. Use sys.dm_exec_sessions to check the current number of sessions, including user processes.
Now, on the instance I have activated maximum servere memory, my question; Is it possible to adjust this setting without starting the service?
Some parameter for example?
The server itself have enough memory.
View 3 Replies
View Related
Feb 11, 2008
Hello. I am called Narsiste.
I have a problem of configuration in SQL server 2005 express train. In fact, I do not know how to make the configuration to tackle the databases SQL server 2005 express train which are on a station has starting from a station B (both being in a network LAN).
But I read in the module of €œconfiguration of the surface of exposure for the services and connections - localhost€? that €œBy defect, the editions Express train, Evaluation and Developer SQL SERVER 2005 authorize only local connections.€?. As it is BY DEFECT, I said myself that it will have to be changed a parameter so that access TCP/IP can go on this version of SQL SERVER.
Here is the message which I have:
€œAn error occurred during the establishment of a connection to the waiter. At the time of connection to SQL Server 2005, this failure can be due to the fact that the default settings of SQL Server do not authorize remote connections. (Provider: Interfaces network SQL, error: 26 - Error during the localization of the waiter/the authority specified) (Microsoft SQL Server, Error: -1)€?.
If somebody encountered this problem in the past, that he wants to inform well me of the solution which he found for this last. Thank you.
View 1 Replies
View Related
Jun 29, 2006
Hi, I've been trying for the past week to get SQL 2005 Server up and running.The SQL is up and running however I am unable to get the Reporting service to start. The log file is below but the main line is:
ReportingServicesService!library!4!29/06/2006-14:33:45:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'VIDICOMASPNET' is not recognized., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException:The user or group name 'VIDICOMASPNET' is not recognized.
But the domain user ASPNET is present. Similar posts across the internet mention about the .NET Framework not be installed correctly. I have reinstalled it many times.
Any help is most appreciated.
Tom
Here is the full log file:
<Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product> <Locale>en-US</Locale> <TimeZone>GMT Daylight Time</TimeZone> <Path>C:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesLogFilesReportServerService__main_06_29_2006_14_33_39.log</Path> <SystemName>CRM</SystemName> <OSName>Microsoft Windows NT 5.0.2195 Service Pack 4</OSName> <OSVersion>5.0.2195.262144</OSVersion></Header>ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.ReportingServicesService!library!4!29/06/2006-14:33:41:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.ReportingServicesService!servicecontroller!9!29/06/2006-14:33:45:: Total Physical memory: 267894784ReportingServicesService!library!4!29/06/2006-14:33:45:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'VIDICOMASPNET' is not recognized., ; Info: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'VIDICOMASPNET' is not recognized.ReportingServicesService!servicecontroller!4!29/06/2006-14:33:47:: e ERROR: Exception caught starting RPC server: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'VIDICOMASPNET' is not recognized. at Microsoft.ReportingServices.Library.Native.NameToSid(String name) at Microsoft.ReportingServices.Library.ServiceAppDomainController.StartRPCServer(Boolean firstTime)
View 5 Replies
View Related
Mar 14, 2007
Hi
I'm a newbie and I have a problem that i can't solve despite sitting here all day trying to wortk it out.
I have installed SQL Server Express 2005 along with the associated toolkit. Previous to that i installed MS Visulal studio 2005, .NET 2.0 and MSDN.
The problemn is that it appears despite installing everything i don't have SQLExpress services running on my PC. I have admin rights, it installed okay but there is nothing to connect to.
When i run "sqlcmd.exe -s (local)SQLExpress -E" from the command prompt i get the following message:
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establi
shing a connection to the server. When connecting to SQL Server 2005, this failu
re may be caused by the fact that under the default settings SQL Server does not
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
When i run SQL Server Configuration there is no "SQLExpress" service present under "SQL Server 2005 Servcies" in SQL Server Configuration dialog; just a message saying:
"there are no items to show in this view"
When i run Surface Area Configuration i get the following message:
TITLE: Surface Area Configuration
------------------------------
No SQL Server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)
------------------------------
BUTTONS:
OK
------------------------------
If you can shed any light on this id be extreamly grateful as i'd been here for hours before stumbling across the toolkit (why this wasn't bundled i don't know) only to realise once i had it that the SQLExpress service isn't running :(
Cheers,
Nick.
View 1 Replies
View Related
May 27, 2008
I am trying to restore database from network drive but
sql server 2005 express is giving error
"system.data.sqlclient.sqlErroratabase <dbname> cannot be opened due to inaccessible files
or insufficient memory or disk space (microsoft.sqlserver.express.smo)."
But when I restore database from "C:" or local drive it alows to do so.
Can anyone help.
View 5 Replies
View Related
Sep 8, 2007
Hi
I have VC++ express and MSSQL SMS express and have an application working nicely locally. The Data explorer and data connections part works really easily.
Now, I want to make the application available to my home network.
I mapped the drive where the database is and called it Z: so I could put my "release" on my other network PC and assumed it would find Z: if I mapped the shared network drive on that machine and called it Z:
But: I can't even add the mapped connection on the local machine, I get:
The file "Z:databasescalorie.mdf" is on a network path not supported for database files. An attempt to attach.....etc"
It works fine on the original F drive.......
Am I approaching this the wrong way. How should I distribute to network PCs?
thanks hopefully
David
View 5 Replies
View Related
May 5, 2006
Hi All,
I've developed an application that connects to a SQL Server 2005 Express database. I created a DSN to connect to the database through ODBC. Currently, I am testing locally and everything works fine.
I would now like to install my application on another workstation and connect remotely to the database located on my development machine.
The client workstation does not have SQL Server 2005 Express installed on it because I would just like my application to connect remotely by creating the DSN and using ODBC. What I'm missing here are the database drivers. The "SQL Natice Client" is not available on this client workstation. How can I deploy the necessary drivers with my installation file so that I may create the required DSN name using the SQL Native Client driver?
Thanks!
View 6 Replies
View Related
Jul 18, 2007
I am having trouble starting sql express. When it downloaded it automatically set the start mode to network service. I am not working from a network so I changed it to local service. Then it refused to start. I tryed system service and still it would not start. So I returned it to network service and now even that will not start. Can someong tell me how I can start sql. Thanks, Ray
View 5 Replies
View Related
