hi all,
i am using SQL Server 7.0 . After changing the machine name the sqlserver is not starting. if i changed the machine name to the old name the server starts as usual. is there a solution for this problem. where can i change the machine name in the sql server configuration. so as to start it correctly...
thanks...
jinujose
i had installed Sqlserver on drive E: before but i changed the drive letter to D: yesterday and now i can't start my sql server. how can i fix this problem?
View 1 Replies View Related
hi there
My object is a database on a single machine to start with . i am running xp home
i am a complete newbie to this, so please bear with me.
i have vb 2005 express edition running on my machine. i then downloaded sqlexpress_adv adition and tried to install.
It checks the prerequisites "the required components were installed successfully"
goes to sql server install wizard , checks the sytem configuration , 15 success , 1
failure.
message = iis feature requirement warning. it says install via control panel / add /remove etc . ???????? it is not in the list of programs.
can i still carry on with the installation?. ( i did)
It gets to feature selection.The database services is marked. (hit next)
Instance name comes up . Default is ticked named instance "sqlexpress". (hit next)
It then says existing compomponents have been found. Select upgarde options below. I ticked sql server database services 9.00.1399.06. (details gives allowed upgrade)
(hit next)
windows authentication mode checked (hit next)
validating settings
then msbox != "the sql server failed to start, see books on line and log etc"
i goto the log
2007-03-08 11:08:54.62 spid5s Starting up database 'master'.
2007-03-08 11:08:54.73 spid5s WARNING: did not see LOP_CKPT_END.
2007-03-08 11:08:54.73 spid5s Error: 3414, Severity: 21, State: 2.
2007-03-08 11:08:54.73 spid5s An error occurred during recovery, preventing the database 'master' (database ID 1) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
2007-03-08 11:08:54.73 spid5s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
any help would be appreciated.
thanks
argoosy12
Hello,
I had installed SQL express yesterday, and it did function, but due some other problems, i uninstalled it, and reinstalled SQL express 2005. Appearantly, there is some rest of the old installation, blocking me to start a new installation.
The link provided by the program (below) does not connect to any page.
I would appreciate some help, thanks in advance.
Regards,
Ruud
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=29503&EvtType=sqlsetuplib%5cservice.cpp%40Do_sqlShutDownRANUInstance%40sqls%3a%3aService%3a%3aStart%40x3
------------------------------
BUTTONS:
&Retry
Cancel
------------------------------
I'm newbe with SQL Server , I'm looking for help with sql server express edition 2005. At the end of installation ocurrs an error:
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually.
Error Number : 29503 . (Summary file)
Rest of components has status : Successfully installed
I've go installed .Net Framework 2.0, I'm using XP with SP2 , no anty-virus software during instalatin is activated, the XP firewall is off during instalation.All system check requirements are passed successufully
(running on Athlon64)
No additional software bound with SQL is installed.(in add/remove programs there is nothing additional connected with sql)
I've re-installed it few times with some other options (network , local) ,different installation path ,but allways the same result - fail. I've tried to find help in few similar posts but that didn't help.Mayby i've miss somethin'
Could someone help ?
I have mentioned this problem before but it has not been resolved. I am installing MS SQL Server Express Advanced i.e. using SQLEXPR_ADV.EXE.
During the initial checks, i get a warning about hardware requirements and I have read the posts about the install failing if the CPU does not support prefetching but I am running a P4 3.0GHz (twin core) CPU with 512MB RAM on Windows XP Pro SP2.
The installation fails at SQL Server Database Services during "Configuring Microsoft SQL Server":
"Starting SQL Service: MSSQL$SQLEXPRESS"
If I click the Retry button, the system goes away and then comes back with the same message. If I click cancel, various roll-back actions are performed and the install fails
Is this the default name for the SQL Server instance ? I thought it would be named after my machine name i.e. GLKD239680SQLExpress ?
Any ideas anyone ? I have not had much luck with installing this despite 2 PC rebuilds and scanning the forums for solutions.... I can post any log files if needed
Thanks
I had a strange experience with MS SQL Server 2005 Express Edition installation, I am running a P4 3G Processor, 1 GB of RAM, Windows XP SP2, 300 GB HDD (SATA if it matters at all :) ) And using Visual Studio Pro 2005.
I have managed to install the SQL Express with no hassle at all, then had to format my HDD, and start from scratch, to make a new home for my VS 2005 Pro (The 300 GB HDD) And managed to install the SQL Express as part of the VS 2005 without any problems, after using it for 3 months now, I've started a new project in VS 2005, and tried to add a new SQL DB, but it had failed for several times.
I€™ve decided that the files got corrupted for some reason and tried to reinstall the MS SQL 2005 using the original SQL Express installation file I've used before, but without joy.
I thought that it is conflicting with some new MS Update patch and downloaded the latest SQL Express advanced installation, but that did not fix the problem either.
The message I'm getting every time I attempt the installation is" SQL Server service failed to start" with all the bla bla about the online books and whatever useless stuff to learn how to start the service manually.
I have uninstalled the whole thing, including VS 2005, .NET Framework, and any registry trace of the SQL Server installation, but again all in vain.
Finally, some smart wizard suggested in one of the threads that if your computer is not part of a domain, you should run the SQL service as a local service, using the advanced option during the first step of the setup.
And guess what! It worked!!!!
My Question is why did it work during the first two installations, without me fiddling with the advanced installation feature?
My computer was and still is, not part of any domain, my hardware did not change at all, and I had the installation failing with or without any software installed!
I am having an asp.net web site hosted in my machine's IIS (5.1). This aspx files are accessing data from an sql server 2000 database located in another machine. While i am trying to open a connection from the aspx files to the database, an error showing login failed for that user. Not a trusted sql server connection. so i unchecked the "allow anonymous access" in the directory security. But now its working from my machine (the web server, localhost). but when i try to access the aspx files from another machine with my system ip, the same error exists-Login failed for the user and not a trusted sql server connection.
View 3 Replies View RelatedI am attempting to create a new trace but I get the following error message: "failed to start a new trace".
I have been doing some digging and as I understand it, I had to find the directory Profiler uses for temporary files. So, I typed the following in the command window "SET TMP" and I received the following reply:
C:UsersRossAppDataLocalTemp
Now, according to the forum: [URL] ...
I am supposed to check that the system folder pointed to by the TMP environment variable exists and is not crammed with files.
Well, when I went to the directory C:UsersRossAppDataLocalTemp, it is indeed full of both files and directories. The size is 16.3 MB and has 133 files and 63 folders.
When I had a look at the Environment Variables window and chose TMP the value is "%USERPROFILE%AppDataLocalTemp" which according to my limited understanding is the equivalent to C:UsersRossAppDataLocalTemp.
So, what I am wondering is am I supposed to totally clear out this directory? I am not too keen on doing this because I don't want to stuff my PC up.
Ran the SP2 locally on a Windows Server 2003 SP1 box that had SQL Server 2005 SP1 install on it. Problem was I ran out of C: drive and it failed in the middle of upgrading the server.
I'm unable to start the SQL Server at all now. Is there any way to back this out? Don't think I can reapply any patches since the service is dead.
Eventlog now shows:
One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
The log shows it's unable to start SQL (blames it on permisions but it's because SQL can no longer start)
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29538
Error Description : MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmssqlsystemresource1.mdf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
I'm guessing its reinstall time but not sure how the attached databases will like that idea.
Thanks in advance for any ideas.
I'm trying to install SQL 2005 onto a 2012 R2 server. The install is failing at the end when it is trying to start the database service. I have looked in the install logs and I'm getting the following error. I'm running 8 virtual processors on the virtual machine (8 Cores). URL...
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."The error is (1067) The process terminated unexpectedly.
  Â
   <Failure Type='Fatal' Error='1067'>
   <EndFunc Name='LaunchFunction' Return='1067' GetLastError='203'>
   CustomAction Do_sqlScript.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
   05/18/2015 14:56:41.705 [4924]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
  Â
[code]...
Hi, everyone!
I faced the problem trying to adjust ssl encryption in ms sql server 2005.
I've completed all steps from this article:
http://msdn2.microsoft.com/en-us/library/ms191192.aspx
But when I'm trying to restart sql server - it fails to start.
Here the error messages I got:
1. Unable to load user-specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
2. TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
3. TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
4. Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
5. SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
SQL Server is installed on Windows 2003 Server OS running computer.
I use certificate created by means stand-alone Certificate Authority that appeared in Administration Tools on that computer after I installed Certificate Services.
I guess the reason is in wrong certificate parameters I set while requesting.
How can I determine correct certificate parameters? Does anyone know?
Any help is appreciated,
Thanks
while failover from one node to another node in cluster environment. cluster node is moving to another node but my SQL server services are not started.in event viewer i am getting bellow errorr event id 19019
[sqsrvres] StartResourceService: StartService (MSSQLSERVER) failed. Error: 42d
[sqsrvres] OnlineThread: Error 42d bringing resource online.
Hello, I've configured SQL Server 2000 for merge replication and am trying to start the snapshot agent for the publication and after about 20 minutes of it trying to start, it gives up with this error.
Server execution failed
There is no more information in the event viewer. I've tried it with a bunch of different subscriptions. SQL Server and SQL Agent are running under a local account which has access to the replcation data directory. SQL Agent is running.
I'm Running SQL 2000 SP3.
Thanks
Robert Brown
In the last step of installing the SQL Server 2005 Express edition I get the following error:
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:38:35 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:38:35 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
---- Context -----------------------------------------------
Do_sqlScript
SqlScriptHlpr
Start service MSSQL$SQLEXPRESS
Error Code: 1814
MSI (s) (80!08) [19:39:58:265]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:39:58 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:39:58 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
Any idea how I can fix this?
Is there a trick to getting this installed correctly? Everything works great until it gets up to starting the service. Here is the complete section of my setup log file.
SQL 2005 Standard.
Machine : KINGSERVER550
Product : SQL Server Database Services
Error : The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
--------------------------------------------------------------------------------
Machine : KINGSERVER550
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_KINGSERVER550_SQL.log
Last Action : InstallFinalize
Error String : The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1067) The process terminated unexpectedly.
Error Number : 29503
I searched a previous thread dealing with this error, but seems like nobody has found a solution.
--Tony
When I am trying to install SQL Enterprise edition, in Server 2003 OS. while installing only it shows an error.
SQL Server Failed to start. For more information, see the SQL server books Online topics,
"How to view SQL Server 2005 setup Log files" and "starting SQL server manually".
Please help me to resolve this.
Hi nice forum you have here.
Please point me to a link on this forum if I’ve missed something but I could not find an answer to this question yet.
I am new to sql and am looking at running random backups of an sql database. Regular backups are running nightly using maintenance jobs in enterprise manager. These random backups would be started at a point in time just before a specific procedure was run. There will be a user assigned the task of running these backups who has no privilege to log onto the sql server machine (nor will he ever get this privilege).
I would be interested to know if there is a way to script this so that this user could simply start a backup from his workstation. The backup could be a repeat of the scheduled nightly backup storing to the same place or a new backup. The db in question is only 150 +/- MB so time involved in completing this job is minimal (the scheduled backup of this db completes in under a minute).
System is SQL 2000 sp4 on a Win 2003 server with XPpro sp2 clients.
Thanks for any tips, hints or detailed descriptions.
Regards
HT
I have a local install of MSDE on my workstation. I have also defined alinked server with another SQL Server on our network. I accepted all thedefaults when I installed MSDE and the server got named my machine name.Everything is working great.Our IT department now needs to change my machine name. What effect willthis have on my current SQL installation?Help and suggestions appreciated.Thanks,Frank*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies View RelatedHi all,
I am using Administrator to log in the WinNT and I have just changed the password
of the Administrator. After that, I discover that I cannot use all function in the sql server.
Althougt the server is still running, I cannot open the database, login the security manager.
I have checked that the SQL Executive in NT service is assigned to local system account.
As you know, there is no place for inputting password. Where can I change the password
in order to let the function of sql server run again?
Thanks
I am new to SQL Server 2005 Reporting Services and I€™m having problems starting the service. I am running a Windows XP SP2 with SQL Server 2005 and reporting services but the service will not start. My SQL Server instance logs on using €˜Windows Authentication€™ using a username sysadm with no password
I have installed IIS and made sure that ASP.net is running.
I have opened up the Report Services Configuration Manager and amended the settings but I€™m unable to get the service started!!!
Theses are my settings
i) Report Server Virtual Directory OK
Name: ReportServer1
Website: Default Web Site
ii) Report Manager Virtual Directory
Name: Reports1
Website: Default Web Site
iii) Windows Service Identity
Service name: ReportServer
Service Account: NT AuthorityLocal Service
Iv Web Service Identity (NOT WORKING)
v) Database Setup
Servername €“ Nameofmyserver
Database name - ReportServer1
Credential Type Server Credentials
When I click on start no error message appears, it just seems to time out.
On a multi node Win2003 x64 R2.
When preforming install for 2nd SQL instance. Setup fails with log entries
Task did not appear to start on machine NODE2 : 267013
Task did not appear to start on machine NODE3 : 267013
Note: first install worked fine - after getting over MSDTC issues...
Also have confirm task scheduler service is running on all nodes.
Anyone with some insights?
Regards
Since Copy Databas Wizard failed to copy anything from remote SS20005 (both are with SP2 3054) in any combination,
I changed SQLServerAgent(myinstance_name) to run under Network from Local System with the help of SQL Server Configuration Manager
For this change it was restarted, failed to start again and continues to be stopped giving
"SQLServerAgent could not be started (reason: Unable to connect to server '<mymachine_name><myinstance_name>'; SQLServerAgent cannot start)."
I changed SQL Server Agent (myinstance_name) back to Local Service, then to Local System and still can't start it.
So, my questions:
1)
What has happened and how can I start SQLServerAgent?
2)
Why cannot I start it under Network Service? since it apparently should access remote resources for CDW to copy from remote SS2005
This is on MS Windows XP SP2
PS
After few trials I amnaged to restart it again under Local System but still cannot change to any different one
Has anyone written or come across a routine that validates start and enddate in a slow changing dimension? (eg verifies there is no overlap in any of the records).
thanks in advance
For some reason , the report server is trying to login as <domainname><machine name> - its supposed to be <domain><user name> or ASPNET or Network Service Authority - I have no clue why it is pickin gup machine name. Any ideas and how to fix?
View 3 Replies View RelatedFolks,
I have read the posts concerning login failures for the ASPNET user. I have a slightly different problem, as you can see from the title of this post.
My environment is a private domain that has two machines:
1) Windows 2000 server on which SQL Server is running. Let's call it FOO_SERVER.
2) Windows XP Professional on which I am running my IIS and .NET development environment. Let's call it FOO_WORK.
3) Let's call the domain, FOO_DOMAIN.
The user, ASPNET, is not a domain user, but a local user, so I do not know how to establish it as a valid login for SQL Server. But this is beside the point, anyway, as the error I am getting has nothing to do with the ASPNET user. It appears that a different username is being used to access SQL Server.
My connection string is:
"server=FOO_SERVER;database=pubs;Trusted_Connection=yes"
The error I receive is:
"Login failed for user FOO_DOMAINFOO_WORK$"
I am using the default settings in machine.config. Specifically <processModel> userName="machine" password="AutoGenerate" </processModel>
Thanks in advance for any suggestions.
-Joel
Hi,
I am getting the following error message, when I was trying to execute an existing SSIS Package which was working properly before.
"Failed to Start Package
Cannot communicate with the debug host process. Failed to obtain child process active object. (Microsoft.DataTransformationServices.VsIntegration)"
So I tried creating a new package and execute it, still I am getting the same error message.
If anyone have come across this problem and rectified it, pls let me know.
Thanks in advance for your help.
Regards,
Prakash Srinivasan
We installed the SQL Server 2005 Developer edition on one of our test server after uninstalling the beta version. Also, we had to rename an entry in the registry to get the install (all components) to work. When I tried to start Integration Services (all the other servers started OK), I get the following error in the Event log.
Microsoft SSIS Service failed to start.
Error: Method 'GetVersionInfo' in type.
Any ideas on how to get SSIS to start.
Hi All;We are going to change our application server. We will copy all of ourDatabase from Mic 2000 Server OS to Mic 2003 Server OS. I found anarticle that how to move all the folders from same OS. My question isthat Would the 2003 OS be a problem when we copy all of the MC SQL 2000folders to New OS ? Has anybody done this before? Could you gimme yoursuggestions please?ThanksASA
View 1 Replies View RelatedGreetings all,I cannot connect to my SSIS service from Management Studio. This is on my local machine, which is my "sandbox" and preliminary development platform.
There are slightly different error messages and extended information returned depending on whether I connect using "localhost" or my explicit machine name.
I have tried registering MSXML*.dll as suggested elsewhere in these forums. I've also tried the DCOM config changes suggested elsewhere in these forums (or someone's blog?) - can't find the link at the moment.
This is all on the same machine and I am a local admin on this machine.
Anyone seen this? Anyone have any suggestions. I'd appreciate any tips.
Regards,
Tom
<< LocalHost - Copy Message Text >>
TITLE: Connect to Server
------------------------------
Cannot connect to localhost.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
BUTTONS:
OK
------------------------------
<< LocalHost - Show Technical Details >>
===================================
Cannot connect to localhost.
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
at Microsoft.SqlServer.Dts.SmoEnum.DTSEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
===================================
Connect to SSIS Service on machine "localhost" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetServerInfo(String bstrMachineName, String& serverVersion)
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
<<ExplicitMachineName - Copy Message Text >>
TITLE: Connect to Server
------------------------------
Cannot connect to TOM-H.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
BUTTONS:
OK
------------------------------
<< ExplicitMachineName - Show Technical Details >>
===================================
Cannot connect to TOM-H.
===================================
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
at Microsoft.SqlServer.Dts.SmoEnum.DTSEnum.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Smo.Environment.GetData()
at Microsoft.SqlServer.Management.Smo.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Smo.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Smo.Enumerator.Process(Object connectionInfo, Request request)
===================================
Connect to SSIS Service on machine "TOM-H" failed: Class not registered.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.GetServerInfo(String bstrMachineName, String& serverVersion)
at Microsoft.SqlServer.Dts.Runtime.Application.GetServerInfo(String server, String& serverVersion)
One of my co-worker changed the sa password today. After that we are getting this error. The SA account gets locked every time. Even within few seconds of unlocking the SA account, it gets locked again. Error message is not clear as what session still using old password and causing the SA account to get locked? Any of our application does not use SA user to connect to databases. We have Tivoli installed on the same system and the GUI of tivoli has the correct password.
Shailesh
Hello!
I created SQLServer account which suppose to launch MSSQLServer and
SQL mail serveces.
But when I try to stop and then run SQL Server through Command promt
I see error message:
" Starting SQL Mail session....
Error: 17903, Severity:18, state:1
MAPI login failure
Error: 17951, Severity:18, state:1
Failed to start SQL MAil session"
Please save my life. If you have any idea what I have to do to fix up
problem let me know.
Thank you.
Alona
I am getting the following errors in the NT Event Log on a system using
SQL 6.5 SP3 on an NT 4.0 SP3 machine (with selected hotfixes). Perhaps
someone here will have experienced this problem. Any suggestions are
appreciated.
Service Control Manager - Event ID 7009
Timeout (120000 milliseconds) waiting for service to connect.
Service Control Manager - Event ID 7000
The SQLExecutive service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Thanks,
Matt Combs
Product Development Engineer
Eaton Corporation - TISD
Clemmons, NC