I have a SQL Server 2000 runing for production. Recently it is frozened occasionally.
Ath the time, no response from SQL server even I use Enterprise Manager, I can not connect to the server.
So there is no way to fixed only reboot the server.
Aftrer that, I checked the error log and go the info as:
SQL Server terminating because of system shutdown.
LogEvent: Failed to report the current event. Operating system error = 31(A device attached to the system is not functioning.).
After reboot, I checked the error log again, seems no special error except:
Attempting to initialize Distributed Transaction Coordinator.
Failed to obtain TransactionDispenserInterface: Result Code = 0x8004d01b
What's the possible reason for this issue? how to figure out and slove this problem?
All, I am using SQL Server 2005 Developer's Edition on Windows XP Home Edition.
With the microsoft provided sample database AdventureWorksBI.msi comes with an analysis services solution called "Adventure Works DW"
Processing this solution should to produce the "Adventure Works DW" Analysis Services database.
This processing never finishes. It hangs on Processing Cube 'Customer Clusters ~MC. Specifically it hangs on Processing Partition 'Internet ~1 ~MG'. This looks like something having to do with Business Intelligence.
I am wondering if my installation "Operating System" is correct or allowable for "SQL Server 2005 Developer's Editon?
I wonder if I need to set any special security for Data Mining? As anyone had any experience with 'never finishing' Analysis Services processing.
All, opinions are welcome. I would 'like' to hear all 'possible' solutions.
I am trying to find out where is the maintenance plan which is backing up SQL Dbs on its own at 12 am daily where as we didn't scheduled maintenance plans at all. We see I/o frozen and resume events every day in event l/o
Log Name:Â Â Â Â Â Application Source:Â Â Â Â Â Â Â MSSQL$MSSQLSERVER2K8 Date:Â Â Â Â Â Â Â Â Â 5/4/2015 12:00:23 AM Event ID:Â Â Â Â Â 3198 Task Category: Server Level:Â Â Â Â Â Â Â Â Information Keywords:Â Â Â Â Â Classic
I have three very simliar packages that I edited. I added an Exec SQL Task to truncate a table. These packages are not large or complex. When I simply try to open two out of the three packages, Visual Studio hangs and I get the balloon saying it's busy. I see in the bottom left hand corner, "Validating Load Phase". This never changes. My question is how can I get into this package? I hadn't yet checked it into SourceSafe If I even attempt to single click on any step in the package, it will hang. I've also had a co-worker attempt to open the packages on his computer, and he gets the same thing, so it's definitely the SSIS package. Any help would be appreciated!
When I try to connect to a SQL server instance from Enterprise Manager, I'm getting a timout connection error. I have to change the timoeout parameter from 4 (the default) to 30 in order to work. Also I realize that some applications (like sharepoint) are having the same problem connecting to that server.
My question is:
Why is that happening?
It used to work fine, and I'm getting this issue a couple of days ago.
I have a problem using service broker, a send the message from server SSB1(initiator) and a receive this message on server SSB2(target), but I don't receive response to SSB1...
In my server SSB2 has this messages on Profiler: - This message could not be delivered because it is a duplicate. - Could not forward the message because forwarding is disabled in this SQL Server instance. - The message could not be delivered because it could not be classified. Enable broker message classification trace to see the reason for the failure.
Message from SSB1 Profiler:
- This message was dropped because it could not be dispatched on time. State: 1
I am working with a client that after every reboot of there SQL 2000 DB server, they experience slow response time for a couple of hours. The server has 12 GB RAM and a Dual 3.8 processor. It is believed that the slow response is due to as queries run after the reboot, they are re-building information in memory and after the memory is built up, it goes back to the normal performance utilizing the memory for speed. Is this an accurate assumption or is there something else to be looking at after the server is rebooted?
I need to know if I am able to use OLE DB connection strings without the username and password for Challenge/Response logins.
I have a web site that uses SSL and Challenge/Response to authenticate users, but my connection to the database is by embedding a generic username and password in the connection string.
I would like to leave that off and have the connection to the database use the challenge/response authentication when they first logged into the web site. This way I can control their permissions in SQL server.
I have 2 servers (say MAINSRV e SECSRV) running SQL2000 Standard SP3 on Windows 2000 Advanced within a NT (!) domain and each server is linked to the other.
My problem is that if I run a query returning few dozens of rows like:
SELECT * FROM MAINSRV.DbName.dbo.TblName TBLA WHERE Fieldx = 'anyval'
from a client connected to the SECSRV server, it takes something like 35 minutes to complete, while the same query completes in no time when run on clients connected to MAINSRV.
Even the simplest SELECT Count(*) FROM... takes more than one minute from SECSRV while completing in a fraction of second from MAINSRV.
I tried to change the linked server security options (SQL/Windows), but the remote query remains slow.
There are no locks active on the table, both the servers have almost no load (CPU less than 10%, when tested) and the query returns just a few KBytes, so communication overhead will not be the problem.
Any suggestions will be very appreciated, thank you!!!
I have recently installed SQL 2005 client tools with SQL Server Management Studio and accessing databases on a SQL 2000 server. The response I am getting is extremely slow. Should I go back to SQL 2000 client or are there methods by which I can improve the performance.
I have two servers, one production server and one backup server which have transactional replication with a pull subscription.
When I configure replication, it works fine during our test weekends testing production load. After tests, replication looks fine for a random number of days. Then, all of a sudden, an error message is displayed on one of the agents: "The agent is suspect, no response within 10 minutes." This has happened a number o times. If I remove replication and configures it again, it always works. Sometimes it works by just updating one of the tables and the error message disappears. The last time (today) that did not work. Updating the database did not replicate and the error message remained.
Has anyone experienced this same problem and has a god solution. One thing that is common is that the error message appears after long times of inactivity on the servers, or perhaps after a restart but that I am not sure about.
Question 1: How can I prevent this error message?
Question 2: Are there any special things to think about when I need to restart the servers and replication is configured, e.g. after installing updates from Windows Update.
I would be very grateful for any answers regarding this.
Please assist, the issue with SQL 2005 Browser and SQL 2000 Server Service is understood.
Our problem is with networked 2000 instances and SQL Express. The SQL 2000 machines (Standard & MSDE) do not have SQL 2005 or Express installed only 2000. When a SQL Express computer is put on the network with the SQL Browser service running almost all SQL 2000 machines lose sight of the other SQL 2000 instances. The second the SQL Browser is turned off on the SQL Express box the SQL 2000 machines can see each others instances. It appears that the response from the SQL Express SQL Browser causes the SQL 2000 machine to stop listening for responses. Once in a while one of the SQL 2000 instances will show up with the SQL Browser active on the network and it is my belief that it is because that response made it in before the SQL browser response. Please help as this does not appear to be a recognized issue. I'm assuming there aren't many sites running as many named instances on individual machines like we do.
Please note this appears to be a problem with SQL Express Browser not SQL 2005 Standard's which runs without problems on our network.
When I launch Outlook, it takes forever for the program to finally open. With any inbound email, it stops processing whatever is underway at the time....and frequently there is a 2-3 second lag between keyboard input and what appears on the screen. SQLserver is usually consuming upwards of 1-gb of memory....help. Mike
OBJECTIVE: I would like to read a text file from SQL Server 2000, read the text file content, and load its conntents in a RichTextBoxTHINGS I'VE DONE AND HAVE WORKING:1) I've successfully load a text file (ex: textFile.txt) in sql server database table column (with datatype Image) 2) I've also able to load the file using a Handler as below: using System;using System.Web;using System.Data.SqlClient;public class HandlerImage : IHttpHandler {string connectionString;public void ProcessRequest (HttpContext context) {connectionString = System.Configuration.ConfigurationManager.ConnectionStrings["NWS_ScheduleSQL2000"].ConnectionString;int ImageID = Convert.ToInt32(context.Request.QueryString["id"]);SqlConnection myConnection = new SqlConnection(connectionString);string Command = "SELECT [Image], Image_Type FROM Images WHERE Image_Id=@Image_Id";SqlCommand cmd = new SqlCommand(Command, myConnection);cmd.Parameters.Add("@Image_Id", System.Data.SqlDbType.Int).Value = ImageID;SqlDataReader dr;myConnection.Open(); cmd.Prepare(); dr = cmd.ExecuteReader();if (dr.Read()){ //WRITE IMAGE TO THE BROWSERcontext.Response.ContentType = dr["Image_Type"].ToString();context.Response.BinaryWrite((byte[])dr["Image"]);}myConnection.Close();}public bool IsReusable {get {return false;}}}'>'> <a href='<%# "HandlerDocument.ashx?id=" + Eval("Doc_ID") %>'>File </a>- Click on this link, I'll be able to download or view the file WHAT I WANT TO DO, BUT HAVE PROBLEM:- I would like to be able to read CONTENT of this file and load it in a string as belowStreamReader SR = new StreamReader()SR = File.Open("File.txt");String contentText = SR.Readline();txtBox.text = contentText;BUT THIS ONLY WORK FOR files in the server.I would like to be able to read FILE CONTENTS from SQL Server.PLEASE HELP. I really appreciate it.
Every so often I am seeing this error in the Event Viewer on Windows 2003 Server. It related to a file that pulls documents from a SQL server db using Response.BinaryWrite. When it pulls a file of about 2MB it creates a warning in the EventViewer. I was told to look at using Response.WriteFile to pull the file instead. I found this page: http://support.microsoft.com/kb/306654 which talks about it but doesnt give an explination on how to integrate with grabbing the content. Does anyone know how to pull db content and use WriteFile and put the file into the Response. Similar to this: Response.Buffer = TrueResponse.Clear()Response.ContentType = contentTypeResponse.AddHeader("content-disposition", "attachment; filename=" + fileName)Response.BinaryWrite(content)Response.Flush()Response.End()
Hi, Here is the code:Try If DS.Tables(0).Rows.Count = 0 ThenResponse.Write("Cannot delete an unexist row!") Response.End() End If DS.Tables(0).Rows(0).Delete() Catch BUG as Exception Response.Write(Bug.Message) End Try I removed all the connection stuff.. What I don't understand is why if ds.table(0).rows.count is zero I still get Bug.Message? I did Response.End ... Thank you.
Regarding SSRS, what is considered a good response time? We have some reports running 2 minutes and the users think that is too long. Is there a guideline as to what a user should reasonably expect and if so, what is that guideline?
Hi. We are migrating a mainframe datacom database to SQL Server. One of our client-server applications already uses SQL Server. This application uses a middleware product to query and update the datacom database being migrated. We are considering using Service Broker to replace the middleware.
In many cases the client does not need a response provided the message is queued and will eventually get delivered. However, in some cases the client would like to wait for the message to be processed before proceeding. Is there an easy way to both submit and optionally wait for a response - with data - in a single stored procedure? If client does not want to continue to wait, is there a way to use a procedure to check for the returned message later?
We have not used Service Broker before and are doing for a "sanity" check before proceeding. We do not want to tightly couple the two databases at this time.
Hi I have Problem, My response time is too Low. Is Any one Know how to improve my response time. My DATABASE SIZE IS 11 GB. I didn’t change any configuration parameter after installing SQL Server. Right my server Having default configuration parameters. Whether I have to change any parameters or not. My queries will generate lot of temporary tables.
At my location we are running Great Plains on SQL server with the Great Plains client on the front end communicating over IP Sockets. Occasionally the client will stop responding for up to 15 minutes. This occurs to all clients at the same time. While this is happening I have ran performance monitor on the SQL server using the SQL counters and everything looks fine. Performance on the server and the network does not degrade. Only the Great Plains client is affected. From this I feel this is not a network problem. I would like some suggestions on what could possible cause this type of problem. I am really just looking for a starting point on where the problem may be originating from. Any suggestions will be greatly appreciated.
Here is the configuration we have at our site: 64 bit virtual server - Clustered 64-bit SQL Server 2005 Standard SP2 listening on port 1433.
32 bit virtual server - 32-bit application that connects to above SQL Server 2005 via standard OLEDB driver installed with windows (String utilized: Provider=SQLOLEDB.1;Persist Security Info=False;Initial Catalog=applicationdb;Data Source=ServerInstanceName).
We are experiencing a slow reponse of 45 sec to more than a minute on a simple select statement on a table having 5000 rows.
The same select statement on the Server locally in Studio returns results back in 2 seconds or less. But from Stuido on any other desktop (remote) it takes 45 secs or more. Same slow response is seen by the application which is using OLEDB.
I've looked into some of the Server parameters but didn't find any clues.
I have three merge publications that use web synchronization. The first publication works with no problem. When I try and sync the second publication, I get the following error messages:
"The operation timed out" "The Processing of the response message failed".
So, I upped the query timeout from 300 seconds to 900 seconds. Now I get the following error messages:
"The connection with the server was terminated abnormally" "The Processing of the response message failed".
I am using the Synchronize applet (found in the Accessories menu) to test my publications.
The third publication also works with no problem, so I do not see why the second one fails.
The only difference between the three is the following: The first replicates a small handful of UDF's The second replicates all tables (and has some filtering applied) The third replicates all stored procs, views, and remaining UDF's.
I am currently migrating a DB from Oracle to SQL Server (Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86))
I've used ssma to do the migration, and I'm reviewing the prodedures to check them. I have find a performance problem in one of them, which worked perfectly under Oracle, and I have tried lots of things with no luck, so I guess I need some help
I insert a row in a table, and the time it takes for this is fine, but seconds later I need to read the row, and this Select lasts 1-2 ms more every time. This process is repeated lots of times.
Every insert-select takes 200 ms when it receives the first data (including some other operations that are not increasing the response time), and 200 insertions later it takes about 500 ms, which is really too much, considering it keeps increasing.
The table has 25+ columns, and some of them contain varchar of 3000+ characters.
I make the select using 4 columns in the where part. One of them is a numeric, and the rest are varchar (no one is the primary key).
I've got a clustered index for the primary key, and two more non-clustered indexes. One of them refers to the columns I use in the Select, and the parameters are Fill Factor: 90, and Recompute Statistics Automatically.
I ran into a situation that if I don't use sql server for a while, in MS SQL Server Management Studio, when I run some query again, it takes a long time to respond. I looked into it with Activity Monitor, seems like the query was waiting for something, in the process view tab, it shows that: WaitType: LATCH_EX Resource: LOG_MANAGER(112F88C8) What is the latch-ex? What should I check next to find out the problem?
Hi there, I tried to make it different as usual but i´m stacked into this problem:Supose TABLE DetailsID_DET ID_CAR DETAILS1 3 1,2,3,4,5,62 4 2,43 5 5,6,7,8andTABLE Details_ItemsID_DI DETAIL_NAME1 Stereo HiFi CD2 Alarm3 AirConditioning4 LeatherSeats5 Pro Wires6 Aluminium WheelsThe problem appears when i need to bring CAR DETAILS (NAME) from TABLE DETAIL_ITEMS.Mi guess i that I should make something like:SELECT * FROM DETAILS_NAME WHERE id_di = (( Array(i) FROM Details )) one by one...I really dont know how to face it.First I thought in bringing ALL details_Items (datafieldtext = id_di and datavaluetext=Details_names) into a dataview.And then "somohow?" filter this dataview according with the Array previuosly splited by me with a For each function.Then I thought "Perhaps" there is a simpliest way to do that using SQL views, o advanced SQL QUERYS.and Finally I thought that creating a VIEW in for both TABLES would be great.The point is that, neither 1,2,3 options, honestly , I dont know how to face them.Thanks in advance, apologise my "rude" English grammar.LUCAS ( From Argentina )
I have 2 pages. ( i want to pass information from a text box to the "certificate.aspx" database query) page 1 certsearch.aspx this is my script i have a label, commnad button, & textbox If txtSearchCert.Text = "" Then lblMsg.Text = "Please enter a certificate #" Else Response.Redirect("certificate.aspx" & txtSearchCert.Text) End If
page 2 certificate.aspx i am not sure what goes here.this is what i am trying Request.QueryString = (txtSearchCert.text) This is my database query on certificate.aspx page <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:imacsConn %>" SelectCommand="SELECT * FROM [SummaryBlue] WHERE REPORTNUMBER = ?"></asp:SqlDataSource>
Hi, I am trying to retrive some XML from my SQL server 2005 database. The XML is in a table called "myxml" and it is being stored a native XML. The Field type is "XML". The VB code returns nothing when I select SELECT xml. How ever if i SELECT NAME it displays the correct name from the name field. how do I return the XML to be viewed as XML throught the response.write? Thanks! Here is my Table definition:
Column Name Data Type Allow Nulls
Id Int
xml xml Yes
NAME Nvarchar(50) yes My XML that is stored in the XML field: <ROOT> <CHAPTER> <TITLE>This is a test</TITLE> </CHAPTER> </ROOT> Here is my VB code: Dim myconnection As SqlConnection Dim mycommand As SqlCommand myconnection = New SqlConnection() myconnection.ConnectionString = _ ConfigurationManager.ConnectionStrings("myxmlConnectionString2").ConnectionString
Dim strSQL As String = "SELECT [xml] FROM myxml WHERE id = 76"
' create SQL command instance mycommand = New SqlCommand(strSQL, myconnection)
Try ' open database connection myconnection.Open() 'execute T-SQL command Dim dr = mycommand.ExecuteReader() While dr.read() Response.Write("<p>" & dr(0).ToString() & "</p>") End While Response.Write("GOT IT")
Catch ex As Exception Response.Write(ex.Message) Response.Write(strSQL) Response.End()
Hi all, I have a website www.searchcontracts.com which has a search feature on the front page. The problem is that whenever a search is submitted (without and filters) it processes extremely slow (if at all, sometime throws 'general network' errors). If working properly it will return about 500+ records. As far as i know if there should be no issues returning a recordset of this size. I have the site hosted in a shared environment and it uses a SQL2000 db. If you filter the search resutls, it's more reponsive (still fairly slow). If you believe that the hosting server i'm using should be upgraded, what would be the best solution? Keep in mind that i want to be able to return way more than 500+ records in one go. Thanks Jakehttp://www.searchcontracts.comhttp://www.custommethod.comhttp://www.boozetour.com
We did an in place convertion of our data base from MS SQL Server 6.5 to 7.0. Our application is much slower now on SQL 7.0. Any idea why? The following is a sample SQL statement that runs quickly on SQL 6.5 and takes a long time on SQL 7.0 I also attached the query plans from SQL 6.5 and 7.0.
SELECT Person_Name.PerNam_Person_Name_PK , Person_Name.PerNam_Row_Status , Person_Name.PerNam_Last_Name_Sndx , Person_Name.PerNam_Last_Name , Person_Name.PerNam_Name_Suffix , Person_Name.PerNam_First_Name , Person_Name.PerNam_Name_Prefix , Person_Name.PerNam_Middle_Name , Person_Name.PerNam_Event_Person_FK , Event.Evn_Event_Nbr , Event.Evn_Event_Type , Event_Person.EvnPer_Last_Name , Event_Person.EvnPer_First_Name , Event_Person.EvnPer_Middle_Name , Event_Person.EvnPer_Name_Prefix , Event_Person.EvnPer_Name_Suffix FROM Person_Name , Event , Event_Person WHERE (Person_Name.PerNam_Agency_ID = "CL") AND ( Person_Name.PerNam_Event_Person_FK = Event_Person.EvnPer_Event_Person_PK ) and ( Event_Person.EvnPer_Event_FK = Event.Evn_Event_PK ) and (Person_Name.PerNam_Person_Name_PK = 0 or ( Person_Name.PerNam_Event_Person_FK = 581541) ) and ( Person_Name.PerNam_Row_Status <> "D" )
Query plan in SQL 6.5
SQL Server Execution Times: cpu time = 0 ms. elapsed time = 31250 ms. STEP 1 The type of query is INSERT The update mode is direct Worktable created for REFORMATTING FROM TABLE Person_Name Nested iteration Index : PK_Person_Name FROM TABLE Person_Name Nested iteration Index : PerNam_Event_Person_FK FROM TABLE Person_Name Nested iteration Using Dynamic Index FROM TABLE Event_Person Nested iteration Index : PK_Event_Person TO TABLE Worktable 1 STEP 2 The type of query is SELECT FROM TABLE Worktable 1 Nested iteration Table Scan FROM TABLE Event Nested iteration Index : PK_Event SQL Server Parse and Compile Time: cpu time = 0 ms. Table: Person_Name scan count 2, logical reads: 6, physical reads: 5, read ahead reads: 0 Table: Event scan count 0, logical reads: 0, physical reads: 0, read ahead reads: 0 Table: Event_Person scan count 0, logical reads: 0, physical reads: 0, read ahead reads: 0 Table: Worktable scan count 0, logical reads: 0, physical reads: 0, read ahead reads: 0 Table: Worktable scan count 1, logical reads: 1, physical reads: 0, read ahead reads: 0
SQL Server Execution Times: cpu time = 0 ms. elapsed time = 62 ms.
