SQL Server Make ASP.net Load Slower At The First Time From Localhost.
Feb 16, 2004
I dont know if it's just a beginner issue.
My ASP.net project with database connection inside, I mean DataBound or whatever the name is make my website load slower because there's a delay about 8 til 9 seconds when in its first load from localhost, after the first load my ASP.net project run very fast and it just take 1 second or less to reload.
The problem will show up again after I restart my computer and trying to load my project from localhost at the first time.
How do I make my ASP.net project to load very fast with just 1 second or less at the first time from localhost?
Thanks.
View 1 Replies
ADVERTISEMENT
May 16, 2008
Clean vista install,
Clean full office 2007plus install
Clean visual studio 2008pro install
Many failed sql 2005dev installed, did SKUUPGRADE-1
Now have office2007 Smallbiz, VS2008pro, SqlExpress and sql 2005dev installed.
Note outlook 2007 error on first run after sql2005dev.
Seams to have broken and created a new sql connection, don€™t think its the original.
but that€™s not the current issue !
web admin page error, could not connect to db
I did regsql.exe from the net dir and the web admin work and the db is created for roles and such in vs 2008 via web admin page and mssql.
Managed to create db in apps data folder and modify connection in server explorer.
Added table to aspx page from apps folder and it runs via f5, but errors under localhost.
€œCannot open user default database. Login failed.€?
€œLogin failed for user 'NT AUTHORITYNETWORK SERVICE'€?
Have seen some reference to iis permissions, but not sure what to change?
Is it a file level permission, a virtual permission
Works in vs2008 using f5 run!
http://localhost:50115/vs2008/
Can work with apps folder db file in vs 2008 server explorer
Had to modify db connection back to sqlexpress in server explorer
Can work with db in sql management studio, have three local instances;
Pc
Pcsqlexpress
Pcsmallbiz
Can display db data in aspx page via f5 , but not localhost unless vs2008 is not running!!!
Have not been able to make vs2008, Sql2005dev, sqlexpress all work together using iis in vista via localhost and vs2008 f5 at same time??
Can€™t do anything with db in solutions explorer, but can work in server explorer if I modify connection back to sqlexpress
Can€™t display data aspx page via localhost
http://localhost/vs2008/
Cannot open user default database. Login failed.
Login failed for user 'NT AUTHORITYNETWORK SERVICE'
Localhost works in iis via virtual directory if I remove db grid in page or vs is not running
Could someone test and tell how to use all of these together?
What is going to happen if I get it to work local and then try to upload to shared host?
<connectionStrings>
<remove name="LocalSqlServer" />
<add name="LocalSqlServer" connectionString="Server=wabpc;Database=VS2008test;Integrated Security=true" providerName="System.Data.SqlClient" />
<add connectionString="Server=SQLEXPRESS;Database=Database.mdf;Integrated Security=true" name="sqlexpress" />
</connectionStrings>
If I close vs2008 and the management studio, localhost works and displays the db info!!
Open vs2008, modify connection back to sqlexpress and the aspx page breaks via localhost
Close vs2008 and local host works
Open vs2008 and get a error 25 in server explorer connection string invalid, but f5 works after the offline clears.
I change db connection back to sqlexpress to work with db in server explorer!
That breaks localhost, but f5 works
Any ideas?
Need more Tylenol
View 9 Replies
View Related
Feb 2, 2007
Hi,We have a C# web application that has been running for a few years now with little maintenance. Over the past few months, we have had some increasing problems.1. Loses session frequently ~ every 2-3 minutes.2. Occasionally (every 2 months) get out of memory exceptions.3. Connections to the DB and therefore the whole site run fast after restart. Gets continuously slower and slower over time until it starts throwing timeouts: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed
prior to completion of the operation or the server is not responding. The timeouts usually come every 3 weeks or so. Number 3 is the biggest problem for us, but I thought maybe 1 or 2 give some indication to why 3 is happening?I don't have much time to look into this now as I'm working on another project, but I was hoping that maybe someone would have ideas just looking at our symptoms.Thank you so much,Christie
View 4 Replies
View Related
Apr 27, 2007
I just have done the SSIS example in the tutorial document included when install SQL 2005 ENT. I have a problem that whenever I test to run, the service load all data from source with out noticing about the data (I mean it load all the data to the destination), I do it several time and it continue to load all without checking. That mean the data is dublicated when the schedule run???
I think there should be a paramete or something like that to help the engine just load the new data to the destination. Could you help please?
Thank
View 3 Replies
View Related
Jul 20, 2005
I am begginner at best so I hope someone that is better can help.I have a stored procedure that updates a view that I wrote using 2cursors.(Kind of a Inner Loop) I wrote it this way Because I couldn'tdo it using reqular transact SQL.The problem is that this procedure is taking longer and longer to run.Up to 5 hours now! It is anaylizing about 30,000 records. I thinkpartly because we add new records every month.The procedure works like this.The first Cursor stores a unique account and duedate combination fromthe view.It then finds all the accts in the view that have that account duedatecombo and loads them into Cursor 2 this groups them together for datamanipulation. The accounts have to be grouped this way because aaccount can have different due dates and multiple records within eachaccount due date combo and they need to be looked at this way aslittle singular groups.Here is my procedure I hope someone can shead some light on this. Myboss is giving me heck about it. (I think he thinks Girls cant code!)I got this far I hope someone can help me optimize it further.CREATE PROCEDURE dbo.sp_PromiseStatusASBEGINSET NOCOUNT ON/* Global variables */DECLARE @tot_pay moneyDECLARE @rec_upd VARCHAR(1)DECLARE @todays_date varchar(12)DECLARE @mActivityDate2_temp datetimeDECLARE @tot_paydate datetime/* variables for cursor ACT_CUR1*/DECLARE @mAcct_Num1 BIGINTDECLARE @mDueDate1 datetime/* variables for ACT_CUR2 */DECLARE @mAcct_Num2 BIGINTDECLARE @mActivity_Date2 datetimeDECLARE @mPromise_Amt_1 moneyDECLARE @mPromise_Status varchar(3)DECLARE @mCurrent_Due_Amt moneyDECLARE @mDPD intDECLARE @mPromise_Date datetimeSELECT @todays_date =''+CAST(DATEPART(mm,getdate()) AS varchar(2))+'/'+CAST(DATEPART(dd,getdate()) AS varchar(2))+'/'+CAST(DATEPART(yyyy,getdate()) AS varchar(4))+''DECLARE ACT_CUR1 CURSOR FORSELECT DISTINCTA.ACCT_NUM,A.DUE_DATEFROM VWAPPLICABLEPROMISEACTIVITYRECORDS AOPEN ACT_CUR1FETCH NEXT FROM ACT_CUR1 INTO @mAcct_Num1 , @mDueDate1WHILE (@@FETCH_STATUS = 0)BEGINSELECT @rec_upd = 'N 'DECLARE ACT_CUR2 CURSOR FORSELECTB.ACCT_NUM,B.ACTIVITY_DATE,B.PROMISE_AMT_1,B.PROMISE_STATUS,B.CURRENT_DUE_AMT,B.DAYS_DELINQUENT_NUM,B.PROMISE_DATE_1FROM VWAPPLICABLEPROMISEACTIVITYRECORDS B (UPDLOCK)WHERE B.ACCT_NUM = @mAcct_Num1ANDB.DUE_DATE = @mDueDate1ORDER BY B.ACCT_NUM,B.DUE_DATE,B.ACTIVITY_DATE,CASEB.Time_ObtainedWHEN 0 THEN 0ELSE 1END Desc, B.Time_ObtainedOPEN ACT_CUR2FETCH NEXT FROM ACT_CUR2INTO @mAcct_Num2 ,@mActivity_Date2,@mPromise_Amt_1,@mPromise_Status ,@mCurrent_Due_Amt,@mDPD,@mPromise_DateWHILE (@@FETCH_STATUS = 0)BEGIN----CHECK------------------------------------------------------------------------DECLARE @PrintVariable2 VARCHAR (8000)--SELECT @PrintVariable2 = CAST(@MACCT_NUM2 AS VARCHAR)+''+CAST(@MACTIVITY_DATE2 AS VARCHAR)+' '+CAST(@MPROMISE_AMT_1 ASVARCHAR)+' '+CAST(@MPROMISE_STATUS AS VARCHAR)+''+CAST(@mCurrent_Due_Amt AS VARCHAR)+' '+CAST(@mDPD AS VARCHAR)+''+CAST(@mPromise_Date AS VARCHAR)--PRINT @PrintVariable2----ENDCHECK------------------------------------------------------------IF @mDPD >= 30BEGINSELECT @tot_pay = SUM(CONVERT(FLOAT, C.PAY_AMT))FROM vwAplicablePayments CWHERE C.ACCT_NUM = @mAcct_Num2ANDC.ACTIVITY_DATE >= @mActivity_Date2ANDC.ACTIVITY_DATE < @mActivity_Date2 + 15----CHECK------------------------------------------------------------------------DECLARE @PrintVariable3 VARCHAR (8000)--SELECT @PrintVariable3 ='Greater=30 DOLLARS COLLECTED'--PRINT @PrintVariable3----ENDCHECK------------------------------------------------------------ENDELSE IF @mDPD < 30BEGINSELECT @tot_pay = SUM(CONVERT(FLOAT, C.PAY_AMT))FROM vwAplicablePayments CWHERE C.ACCT_NUM = @mAcct_Num2ANDC.ACTIVITY_DATE >= @mActivity_Date2ANDC.ACTIVITY_DATE BETWEEN @mActivity_Date2 AND@mPromise_Date + 5----CHECK----------------------------------------------------------------------DECLARE @PrintVariable4 VARCHAR (8000)--SELECT @PrintVariable4 ='Less 30 DOLLARS COLLECTED'--PRINT @PrintVariable4----END CHECK------------------------------------------------------------END----------------------------------------MY REVISEDLOGIC-------------------------------------------------------IF @rec_upd = 'N'BEGINIF @mDPD >= 30BEGINSELECT @mActivityDate2_temp = @mActivity_Date2 + 15--DECLARE @PrintVariable5 VARCHAR (8000)--SELECT @PrintVariable5 =' GREATER= 30 USING ACTVITY_DATE+15'--PRINT @PrintVariable5ENDELSE IF @mDPD < 30BEGINSELECT @mActivityDate2_temp = @mPromise_Date + 5--DECLARE @PrintVariable6 VARCHAR (8000)--SELECT @PrintVariable6 =' LESS 30 USING PROMISE_DATE+5'--PRINT @PrintVariable6ENDIF @tot_pay >= 0.9 * @mCurrent_Due_Amt--used to be promise amtBEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET PROMISE_STATUS = 'PK',TOTAL_DOLLARS_COLL = @tot_payWHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto PK.IF @mPromise_Status IN ('PTP','OP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @todays_dateWHERE CURRENT OF ACT_CUR2ENDSELECT @rec_upd = 'Y 'ENDIF ((@tot_pay < 0.9 * @mCurrent_Due_Amt) OR @tot_pay IS NULL)AND( @mActivityDate2_temp > @todays_date )--need to put 1dayof month here for snapshot9/01/2004BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSETPROMISE_STATUS = 'OP'WHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto OP which is the original Activity Date.--The record will hold this date until it goes into PK,PB,orIP.IF @mPromise_Status IN ('PTP','OP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @mActivity_Date2WHERE CURRENT OF ACT_CUR2ENDENDELSE IF ((@tot_pay < 0.9 * @mCurrent_Due_Amt) OR @tot_pay ISNULL)AND( @mActivityDate2_temp <= @todays_date )--need to put 1dayof month here for snapshot 9/01/2004BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSETPROMISE_STATUS = 'PB',TOTAL_DOLLARS_COLL = case when @tot_pay is nullthen 0 else @tot_pay endWHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto PB.IF @mPromise_Status IN ('PTP','OP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @todays_dateWHERE CURRENT OF ACT_CUR2ENDENDENDELSE IF @rec_upd = 'Y'BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSETPROMISE_STATUS = 'IP',TOTAL_DOLLARS_COLL = 0WHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto IP.IF @mPromise_Status NOT IN ('IP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @todays_dateWHERE CURRENT OF ACT_CUR2ENDENDFETCH NEXT FROM ACT_CUR2 INTO @mAcct_Num2,@mActivity_Date2,@mPromise_Amt_1,@mPromise_Status ,@mCurrent_Due_Amt,@mDPD,@mPromise_DateENDCLOSE ACT_CUR2DEALLOCATE ACT_CUR2FETCH NEXT FROM ACT_CUR1 INTO @mAcct_Num1 , @mDueDate1ENDCLOSE ACT_CUR1DEALLOCATE ACT_CUR1SET NOCOUNT OFFENDGO
View 15 Replies
View Related
Sep 3, 2007
Any ideas how to make reports faster when returning lots fo rows?
I know you would need to work on your sql query etc..
Or maybe cache it.
But i'm thinking of having a kind of middle tier thing that sits between your sql database and the reports itself.
Any ideas would be appreciated
View 2 Replies
View Related
Dec 13, 2006
I'm trying to do the above using the Reporting Services Configuration Manager and I can't even connect. I get the error Provider Load Failure.
Anyone got any pointers?
View 13 Replies
View Related
Mar 1, 2008
hi, friends, please look at this:
I have a SSIS package, and inside it I do something like below:
1. I have a SQL component, to give back a object to store the records.
2. I have a VB script component, I direct the object I got in 1 step into the script as a dataset.
My problem is:
I run the package in the SQL SERVER 2005 Store Procedue like this:
do
dtexec.exe package.dtsx
loop untill i>t
I control the it runs 30 times. But I found that the speed is slower and slower.
the first time, it takes about 600 s, but the last time, it takes the 1800 s.
Why?
The package don't drop the object it create during the loop in the Store Procedue ?
Thanks!
View 11 Replies
View Related
Dec 20, 2006
Here is an odd problem (to me).
I need to measure the time between timefield_a and timefield_b. So, I used
DATEDIFF (hh, timefield_a, timefield_b)
Now, they said "Our clock starts at 7am, so even if someone enters timefield_a at 5am or 630am, I want that rounded up to 7am, so my clock doesn't start till then".
So, I've been trying to create a case statement that rounds the time up to 7am but still keeps the date in tact. No luck.
Any thoughts?
View 1 Replies
View Related
Nov 12, 2007
I have asp.net 1.1 web form and it inserts date and time in SQL database, but it insert only date not time , It insert date time in following format
2002-01-22 00:00:00.000
some one tell me why it is not inserting time or why it is inserting time as 00:00:00:000.
I want to my time to look like 14:42:51:153. (format)
How can I change my time format
give me asp.net codes for time formating or what do I need to do to resolve the problem,
thank you
maxmax
View 1 Replies
View Related
Mar 12, 2006
I created aspnet DB on SQL Server 2K using aspnet_regsql utility. Everything works fine except the DateTime fields in all tables are using a wrong time zone. How do I set it to use my local time zone?
Any help will be greatly appreciated.
View 1 Replies
View Related
Dec 5, 2014
I have a CTE query that is used to fill in nulls on a history table. The With statement executes just fine. sub 2 seconds on 974 records, however the main query is what's turning the whole query into a turtle. I know that it's the looping that it's doing there that is causing the slow down, but I'm just not sure how to fix it. I've tried inserting it into a temp table, refactored the code a hundred times, but nothing seems to be working.
Code is below and the execution plan is attached.
Server Version: 12.0.2342.0
Enterprise: 64bit
;WITH BuildTable
AS ( SELECT [GEGTH].[ID]
, [GEGTH].[Changed By]
, CAST( [dbo].[GetWeekStarting] ([GEGTH].[Changed Date] , 2 ) AS DATE) AS WeekOf
, [GEGT].[Title]
[code]....
View 6 Replies
View Related
Jun 19, 2007
I have a Visual Studio 2005 web application Front End.
The front end is basically only used as a series of links to SQL Reports.
It seems that when you first click the links to access the reports, there is a slow response time to first load the report viewer. Then after a while of accessing the page, I suppose some of the components are cached so the page loads faster.
Is there a way to automatically cache the pages or any other way to decrease response time on the report viewers?
Edit: To clarify, it first takes around 10-15 seconds to load the .aspx that contains the report viewer. Then it takes around 5-10 seconds to load the report viewer and the report. Is there any way to minimize these times? It seems to speed up the more the page is accessed, but is there a sure-fire way?
View 9 Replies
View Related
Jul 23, 2005
Greetings all,I am a network security professional rather than a MS SQL admin, so Iapologize in advance if this is a bit of a basic question for thislist. I also cross-posted this to microsoft.public.sqlserver.server,so sorry if anyone's read it already.I know an admin setting up a SQL server that will only beaccesible by a webserver running on the same host (not happy aboutrunning private vs publicly avaialable services on the same host , butit's what we've got). As such, I'd like to recommend to him that theSQL server only listen on the localhost ip, 127.0.0.1, thereby makingit inaccesible to the outside world. I looked around the MSknowledgebase but couldn't find a clear document stating how to dothis. Is it even possible? Is there a better option for thisconfiguration?It's been suggested that firewalling is the only option, but I'd reallylike to do *both* (firewall & bind to localhost). The firewall in thiscase will have to be host-based instead (software) instead of hardwarefor non-technical reasons, so additionally if anyone recommends asoftware firewall they use for this purpose I'd appreciate it. My firsimpulse is to recommend Tiny, but I've never used a software firewallfor an MS SQL/Web server before.Thanks,Brian
View 2 Replies
View Related
Feb 6, 2008
Hi all,
My ASP application is running fast in SQL Server 2000. But when we shifted it to SQL Server 2005, it becomes very slow.
I have created the indexes also. There is lot of data in the tables.
Is there any option to build the indexes for previous data.
Please help....
-Shah.
View 2 Replies
View Related
Jul 20, 2007
We have an extensive stress test for our OLTP application.that runs slower after upgrading to SQL Server 2005.
We have done the following:
- applied SP1 and SP2
- updated statistics (sp_updatestats)
- recompiled all stored procedures
Some behavior we notice in Perfmon over the course of the 1-hour test is:
- Average CPU Utilization is up from 22% to 32% and we're trying to figure out why
- Compilations per second are up from 200 to 250
- Recompilations per second are down from 5 to 1 (which is good).
- Memory utilization is identical.
- We see exagerated spikes in response times. The general performance
seems pretty good - but there are periodic spikes that hurt our averages.
- I examined perfmon for waits and nothing jumped out.
- A small handful of application workflows are much slower, while most are roughly identical.
I realize there could be a zillion different causes. But if anyone has experience upgrading a large OLTP solution which uses a mixture of dynamic SQL and stored procedures to SS2005 - and tuning the upgraded database - please offer any suggestions.
Our current plan includes (a) running the Best Practices analyzer which already uncovered a trace flag we may want to use since we're running on an 8-way, (b) rebuilding indexes, and (c) examine a SQL Trace this time around too since it appears the slowness is isolated to certain application workflows.
Please offer any suggestions that have worked for your team.
Thanks so much!
Mike
PS I will post all the things we end up doing in the end once we get performance equal or better - hopefully the latter!!!
View 9 Replies
View Related
Jan 25, 2006
I am trying to load a table from MS Access into SQL Server. The Table has several columns defined as Date/Time. When I define the transform I get an error saying that the conversion between DT_DBDATE and DT_DBTIMESTAMP is not supported.
How do I get around this?
View 1 Replies
View Related
Apr 28, 2004
Hi,
I am experiencing some problems accessing an Oracle database through
OLE DB from an MTS application using OpenWithServiceComponents (which
is supposed to give me connection pooling).
When I connect to a SQL Server database it only takes 3.1 ms to open a
connection, while with Oracle it takes 15.5 ms (both DB's running on
the same machine, I made 1000 calls and took the average).
Am I doing something wrong, am I missing something here?
I have tried to use the plain Open method, but in this case it takes
5.4 ms with SQL Server and 31.4 ms with Oracle.
Is Oracle really that much slower when accessing it through OLE DB?
Thanks for any advice/hints!
Florin
View 1 Replies
View Related
Feb 28, 2007
Hi,
I am surprised to see that in Business Inteligence Studio debugging mode, my packages take shorter. And when I run it through Agent on the SQL Server where data actually resides, it take around 70% longer time.
The package is now very closed to data and database engine itself, in BIDS it wasnt.
Anybody knows why this happen ? Do I need to tune up something ?
Any input in this will sincerely be appreciated.
View 1 Replies
View Related
Jul 20, 2005
Anyone encounter differences between SQL2K EE and SQL2K Dev Editon?FAILS-----Machine_A [App Server] <-- JDBC --> Machine_ASQL2K_Dev_Ed..dbError: "com.inet.tds.SQLException: Connection refused"When app server on Machine_A attempts to connect to database onMachine_A the conenction is refused.SUCCEEDS---------Machine_A [App Server] <-- JDBC --> Machine_BSQL2K_EE..dbWhen app server on Machine_A attempts to connect to database onMachine_B the conenction succeeds and the app server runs normally.JDBC driver: com.inet.tds.TdsDriverjdbc:inetdae7:locahost:1433I don't believe the app server is exhausting the 10-connection max onSQL2K developer edition (there is a 10-connection limit imposed on thedeveloper edition, correct?)LB
View 2 Replies
View Related
Mar 30, 2007
Hi!
When trying to log into Reporting Services in SQL Server 2005 Management Studio, I receive the following error message:
TITEL: Verbindung mit Server herstellen
------------------------------
Es kann keine Verbindung mit 'RD2MWD000349' hergestellt werden.
------------------------------
ZUSÄTZLICHE INFORMATIONEN:
Unable to connect to the remote server (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
No connection could be made because the target machine actively refused it (System)
------------------------------
SCHALTFLÄCHEN:
OK
------------------------------
Has anybody had that problem before? Happens right after installation, no customisation of the SQL Server has been done yet. And I run the server on localhost.......
View 3 Replies
View Related
Jul 18, 2005
I have an ASP.NET webform:This connection works: "Server=localhost;uid=sa;pwd=;database=pubs"but this connection DOES NOT work: "Server=dnrsqlt1;uid=sa;pwd=;database=pubs"dnrsqlt1 is a sql server my network.Do I have to do something to users ASPNET or IUSER_Machinename on the remote machine
View 6 Replies
View Related
Jun 27, 2001
Hi,
We have recently upgraded our production server from a dual pentium II 400mhz server with 384Mb of RAM to a triple 700mhz Pentium III system with 2gb of RAM . However, since switching over, all of our Access queries on the SQL7 databases are either running extremely slowly or not at all despite the DSN's being set up correctly . Does anyone have any ideas why, and more importantly, how I can resolve this???
Thanks
Pete Burton
(IT Support)
Durham Aged Mineworkers Homes Association
View 2 Replies
View Related
May 13, 2008
Please let me know what type of Traces I can run to identify the underlying cause.
Both setup are in Dev. This is a brain teaser. Same everything but 100x slower.
declare
@AN_CustID int,
@LastName varchar(30),
@FirstName varchar(30)
select @AN_CustID = 2824, @LastName = 'XXXXX', @FirstName = 'XXXXX'
SET NOCOUNT ON
DECLARE @SdxLastName char(4)
DECLARE @TheFirstName varchar(30)
DECLARE @HitCountLastNameOnly int
DECLARE @HitCountFirstName int
DECLARE @ThresholdLastName int
DECLARE @ThresholdFirstName int
-- Set minimum row hit count for when to use the first name in addition to last name for search
SET @ThresholdLastName = 2 --if we get at least this number of rows back, ignore the first name completely
-- Set maximum row hit count for when to use the exact first name instead of first name soundex in addition to last name soundex for search
SET @ThresholdFirstName = 12 --if we get over this number of rows back, look for exact first name match
SELECT
@AN_CustID = ISNULL(@AN_CustID, 0),
@LastName = RTRIM(ISNULL(@LastName, '')),
@FirstName = RTRIM(ISNULL(@FirstName, ''))
IF @AN_CustID < 1 OR @LastName = '' RETURN --required params
-- Whenever a doctor's first name is unknown, the user will enter "DR"; therefore, do not soundex the first name in this case
IF @FirstName='DR.' OR @FirstName='DR' SET @FirstName=''
-- Get the soundex of the specified physician
SELECT @SdxLastName = dbo.aif_Soundex(@LastName), @TheFirstName = dbo.aif_Soundex(@FirstName)
-- Determine how many rows are returned based solely on similarity of the last name
SELECT
@HitCountLastNameOnly = COUNT(*) FROM PhysicianMstr p (NOLOCK)
WHERE
p.AN_CustID = @AN_CustID
AND p.Active = 1
AND @SdxLastName = dbo.aif_Soundex(RTRIM(p.LastName))
-- Check if using just the last name soundex returns too few rows
IF @HitCountLastNameOnly < @ThresholdLastName
BEGIN
-- Determine how many rows are returned based on last name soundex or first name soundex
SELECT
@HitCountFirstName = COUNT(*)
FROM PhysicianMstr p (NOLOCK)
WHERE
p.AN_CustID = @AN_CustID
AND p.Active = 1
AND (
@SdxLastName = dbo.aif_Soundex(RTRIM(p.LastName))
OR @TheFirstName = dbo.aif_Soundex(RTRIM(p.FirstName))
)
-- If too many rows, switch to exact match on first name instead of soundex of first name
IF @HitCountFirstName > @ThresholdFirstName
BEGIN
SET @TheFirstName = @FirstName
SET @HitCountLastNameOnly = -1 --negative value indicates first name exact match, not soundex
END
END
-- List physicians with similar sounding names
SELECT
p.AN_PhysicianID,
pm.AN_CustID,
RTRIM(p.LastName) AS LastName,
RTRIM(p.FirstName) AS FirstName,
RTRIM(p.StateLicNo) AS UPIN,
RTRIM(mis.Specialty) AS Specialty1,
pm.Specialty2,
p.Active,
RTRIM(pm.Degree) AS Degree,
pm.Extra,
p.CreatedBy,
p.CreatedOn,
p.ModifiedBy,
p.ModifiedOn,
p.PLEPhysicianMIID
FROM
PLEPhysicianMstrMI p (NOLOCK)
INNER JOIN PhysicianMstr pm (NOLOCK) ON
p.AN_PhysicianID = pm.AN_PhysicianID
LEFT JOIN PLEPhysicianSpecialtyMstrMI mis (NOLOCK) ON
p.PLEPhysicianSpecialtyMIID = mis.PLEPhysicianSpecialtyMIID
WHERE
pm.AN_CustID = @AN_CustID
AND p.Active = 1
AND (
@SdxLastName = dbo.aif_Soundex(RTRIM(p.LastName))
OR @TheFirstName =
CASE
-- Include first name only when we don't have the minimum number of rows
WHEN @HitCountLastNameOnly < 0 THEN p.FirstName --exact first name match
WHEN @HitCountLastNameOnly < @ThresholdLastName THEN dbo.aif_Soundex(RTRIM(p.FirstName))
ELSE '****' --force false for first name test
END
)
ORDER BY p.LastName, p.FirstName
View 6 Replies
View Related
Jan 19, 2007
Hello Guys,
Please take me out from this hell. I created report using VS2005 Business Intelligence Project. It builds fine. I can also see data in the design time. But when I am trying to deploy it gives me this error.
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://localhost/ReportServer.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>Configuration Error</title>
<style>
body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
pre {font-family:"Lucida Console";font-size: .9em}
.marker {font-weight: bold; color: black;text-decoration: none;}
.version {color: gray;}
.error {margin-bottom: 10px;}
.expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
</style>
</head>
<body bgcolor="white">
<span><H1>Server Error in '/ReportServer' Application.<hr width=100% size=1 color=silver></H1>
<h2> <i>Configuration Error</i> </h2></span>
<font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
<b> Description: </b>An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
<br><br>
<b> Parser Error Message: </b>An error occurred loading a configuration file: Failed to start monitoring changes to 'c:inetpubwwwroot' because access is denied.<br><br>
<b>Source Error:</b> <br><br>
<table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code><pre>
[No relevant source lines]</pre></code>
</td>
</tr>
</table>
<br>
<b> Source File: </b> c:inetpubwwwrootweb.config<b> Line: </b> 0
<br><br>
<hr width=100% size=1 color=silver>
<b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
</font>
</body>
</html>
<!--
[HttpException]: Failed to start monitoring changes to 'c:inetpubwwwroot' because access is denied.
at System.Web.FileChangesMonitor.FindDirectoryMonitor(String dir, Boolean addIfNotFound, Boolean throwOnError)
at System.Web.FileChangesMonitor.StartMonitoringFile(String alias, FileChangeEventHandler callback)
at System.Web.Configuration.WebConfigurationHost.StartMonitoringStreamForChanges(String streamName, StreamChangeCallback callback)
at System.Configuration.BaseConfigurationRecord.MonitorStream(String configKey, String configSource, String streamname)
at System.Configuration.BaseConfigurationRecord.InitConfigFromFile()
[ConfigurationErrorsException]: An error occurred loading a configuration file: Failed to start monitoring changes to 'c:inetpubwwwroot' because access is denied. (c:inetpubwwwrootweb.config)
at System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean ignoreLocal)
at System.Configuration.BaseConfigurationRecord.ThrowIfParseErrors(ConfigurationSchemaErrors schemaErrors)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey, Boolean getLkg, Boolean checkPermission)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
at System.Web.Configuration.RuntimeConfig.get_HealthMonitoring()
at System.Web.Configuration.HealthMonitoringSectionHelper..ctor()
at System.Web.Management.HealthMonitoringManager..ctor()
at System.Web.Management.HealthMonitoringManager.Manager()
at System.Web.Management.WebBaseEvent.RaiseRuntimeError(Exception e, Object source)
at System.Web.HttpResponse.ReportRuntimeError(Exception e, Boolean canThrow, Boolean localExecute)
at System.Web.HttpRuntime.FinishRequest(HttpWorkerRequest wr, HttpContext context, Exception e)
-->
--. (Microsoft.ReportingServices.Designer)
------------------------------
BUTTONS:
OK
------------------------------
View 8 Replies
View Related
May 14, 2007
hi ,
I am trying to connect to my local SQL server 2005 from "Server Explorer" but it is giving the error of "Remote Connectons" not allowed.
I am using "windows authentication" login.
My SQLExpress and SQLExpress browser are running from "SQL server configuration manager".
If i use a "App.Config" file to connect to database, the SQl connection can open and i can run the stored procedure.... but cannot access the database on my local machine.
Please help.
thanks for reply.
With regards,
Girish.
View 7 Replies
View Related
Sep 18, 2006
hi,
I got this error when I was trying to deploy the reporting into IIS..
A connection could not be made to the report server http://localhost/reportServer.
------------------------------
ADDITIONAL INFORMATION:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
------------------------------
The request failed with HTTP status 404: Not Found. (Microsoft.ReportingServices.Designer)
I am not able to solve it please help.
Thanks.
View 12 Replies
View Related
Jul 21, 2006
Hi all,
When I build a simple project using the report wizard project.
When i deploy the report i get the following error.
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://localhost/ReportServer.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<?xml version="1.0" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head>
<title>Server Unavailable
</title>
</head>
<body>
<h1><span style="font-family:Verdana;color: #ff3300">Server Application Unavailable
</span></h1>
<p>
<span style="font-family:Verdana;">
The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request.
</span></p>
<p>
<b>Administrator Note:
</b> An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.
</p>
</body>
</html>
--. (Microsoft.ReportingServices.Designer)
------------------------------
BUTTONS:
OK
------------------------------
Could some one come to my rescue.
Thanx in advance.
Ronald
View 4 Replies
View Related
Feb 9, 2007
I have set up a locahost site in IIS using the "Configure Web Synchronization Wizard". One of the first test I was asked to do was to open a broweser and browse to http://localhost/MobileTest/sqlcesa30.dll
If all is well I should get a web page with the following line:
SQL Server Mobile Server Agent 3.0
But unfortunately I get an error stating :
"The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance."
I checekd the Event log and found this error related the IIS launch process on my machine.
DCOM got error "Logon failure: unknown user name or bad password. " and was unable to logon .IWAM_Rataq in order to run the server:
where Rataq is the name of my machine. Could my IWAM_Rataq account be corrupted, my other sites on the machine work.
Infact if i put in a Test.htm page in the virtual directory MobileTest I am able to browse to the page.
Can the Account be re-set? is there another problem that I am not aware of. I have Norton Internet 2006 running could that be the reason? Could Norton be blocking the dll from loading? But the event log states it is a Account error.
Any ideas why this might occur? any help is always appreciated
View 1 Replies
View Related
Apr 11, 2007
Hi -
I got through the installation hoops for SQLEXPRESS Reporting Services in Vista and set up the default configurations in Report Services Configuration. I can explore the default directory for "Reports" in IIS7, but I can't browse in IE. I get the "The report server is not responding. verify that the report server..." message in the browser. This is after I migrated the app per the initial http 500 error using the preferred method - %systemroot%system32inetservAPPCMD.exe migrate config "Default Web Site/Reports".
I'm running Vista Ultimate, VS2005, SQLEXPRESS SP2. I've tried running IE as admin and also I've disabled UAC from gpedit.msc - ...Windows SettingsSecurity SettingsLocal PolicySecurity Options and unchecking UAC.
Thanks,
Mike
View 13 Replies
View Related
May 28, 2015
how I can load the CSV file data into the sql server table. I know there are ways like bulk insert and other to load the csv file data into the table. But in my case the table doesn't exist and has to be created at the run time. With simple insert in temp table we do like select * into #temp from tablename and that creates the temp table. So. I need something like that which create the temp table and load the data into it. because the CSV file would have different number of columns and names so I can not create the table structure in advance. I have to create the table at run time.Â
View 3 Replies
View Related
Feb 15, 2008
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
here is my web.config file:<?xml version="1.0"?><!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
--><configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<appSettings><add key="EmailFrom" value="webmaster@reaganpower.com"/>
<add key="EmailSubject" value="File Ready for Download!"/><add key="SmtpServer" value=""/>
<add key="MailUser" value=""/><add key="MailPassword" value=""/>
<add key="MailPort" value="25"/><add key="EmailFormatSelected" value="Text"/>
<add key="PageTitle" value="Send It Now!"/><add key="ShareLocalFolderPath" value="H:MIS DepartmentIntranetSendItNowFileStorage"/>
<add key="httpDownloadPath" value="http://misfs/SendItNow/ContentFiles/"/>
<!--
<add key="CurrentTheme" value="CleanBlue" />-->
<add key="CurrentTheme" value="CleanOrange"/></appSettings>
<connectionStrings>
<add name="ConnectionString" connectionString="Data Source=(local)SqlExpress;AttachDbFilename=|DataDirectory|FileShareDB.mdf;Integrated Security=True;User Instance=True"providerName="System.Data.SqlClient"/>
</connectionStrings><system.web><!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.-->
<identity impersonate="false"/>
<roleManager enabled="true"/><compilation debug="true" strict="false" explicit="true">
<assemblies><add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/></assemblies></compilation>
<pages><namespaces>
<clear/><add namespace="System"/>
<add namespace="System.Collections"/><add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/><add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/><add namespace="System.Web"/>
<add namespace="System.Web.Caching"/><add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/><add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/><add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/><add namespace="System.Web.UI.HtmlControls"/>
</namespaces></pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user. -->
<authentication mode="Forms"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>-->
</system.web>
</configuration>
View 2 Replies
View Related
Dec 14, 2007
Hi,
Here I will describe my problem.
1. We are loading large amount of data from database on background thread which is starting on Application_start event in global.aspx.cs file.The data is later cached for subsquent request to improve the performance.
2. Now when we put the application on web farm garden, it is not able to load the application.
3. We are sending the request the servers through Router kind of application.
4 This application is working fine on single server enviornment.
Please help us.
Ajay Kumar Dwivedi
View 1 Replies
View Related
