I am new to SQL Admin .
A scheduled JOB runs nightly to update a database with the days info.
This has been running fine for a very long time.
The JOB consists of many stored procedures but now the last one is failing with following message:
SQL Server message 1101, state 1, severity 17: unable to allocate new
page for database 'tempdb'. There are no more pages available on valid
allocation pages.
space can be created by dropping objects, extending the database or
dumping the log with no_log.
I tried to Shrink TEMPDB but get the following error:
Server: Msg 8909, Level 16, State 1, Line 1
Table error: Object ID 0, index ID 0, page ID (1:192). The PageId in the page header = (0:0).
If we run the query below with the values of 'rml' and 'ra' it runs but if we use 'cca' and 'cc' we get this error:
Server: Msg 1101, Level 17, State 10, Line 8 Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth.
from tblAsset, tblAsset_Book, tblCounty_Names, CER..tblLocation, tblGL_Account where tblAsset_Book.Level_1 = @Level_1 and tblAsset.Level_1 = tblAsset_Book.Level_1 and tblAsset_Book.Level_2 = @Level_2 and tblAsset.Level_2 = tblAsset_Book.Level_2 and tblGL_Account.Company = tblAsset.Level_2 and CER..tblLocation.SBU = tblGL_Account.Company and tblCounty_Names.County = tblAsset.County and CER..tblLocation.County = tblCounty_Names.County and CER..tblLocation.Code = tblAsset.Plant and tblGL_Account.Account = tblAsset.Account and tblAsset_Book.Book_Number = '1' order by tblAsset.State
hi , i am getting this error while executing,pls tell me the way..
Server: Msg 1101, Level 17, State 10, Line 1 Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth.
I run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound). What is a reasone for the error? What to do?
I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid" What is a reason for error?
I am having trouble specifying a message body that is valid. I mean for the client to send. If I leave it as null then everything is ok but if I create a memorystream and add a line of text it reports back it did not pass validation. I do not understand this and am not sure what to do. I need to send a message based on a code and text but do not know the format of the body that is allowed. The code I am refering to comes out of HelloWord_CLR because that is what I am formating my sample after. I call it the same way it calls the return message done in ServiceProc. I need to know the message format including body since this does not seem to work. A sample of the call is bellow.
// Create an empty request message
string Msg = "Hello";
MemoryStream body = new MemoryStream(Encoding.ASCII.GetBytes(Msg));
I installed Micrsoft Server Desktop Engine from the CD I received in my ASP.net book. The installation went fine and then I went to the DOS prompt and did the "setup SAPWD..." and it ran. I restarted my computer and opened ASP Matrix and went to the Data tab and proceed to connect to the server. It gave me an error message it couldn't connect.
So I uninstalled MSDE and made sure the sql2ksp3 folder was gone. So I went ahead and installed the MSDE again from the CD again and then went to DOS to do the setup. It ran through the setup until the very end with 11 seconds remaining and received error message " Setup failed to configure the server. Refer to the server error logs and setup logs for more information. I have tried it several times and it always stops around 11 seconds. I have tried to install the download from microsoft.com instead the CD and that didn't work also. So at this point I am stuck. PLEASE HELP!
I also checked my Registry keys for a file called PendingFileRenameOperations and it wasn't in the registry keys.
If anyone has any suggestions I would appreciate it.
I began recieving the following error message. How can I resolve this?
SQL Server SQL Server could not find the specified named instance (PINNACLESYS) - please specify the name of an existing instance on the invocation of sqlserver.exe.
I am getting an error while communicating between SvrA and SvrB. I am able to see the messages in the sys.transmission_queue on serverA. On server B could not see the message.
I ran the SQL Server Profiler to trace the events and on 'Broker/Broker:Message Undeliverable' event following error message is displayed :
"This message could not be delivered because an internal error (code 15404, state 19) was encountered while processing it. Check the error log for more information."
Where is this error log located? Is there any way to pinpoint exact error.
I have a website that works OK on my local machine when I test it within Microsoft Visual Studio's debugging mode. However now that I have copied it over to a remote server it is failing with an error message of:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)As far as I'm aware I have never used SQL Server with my webpage. All connections to databases are to Oracle with connection strings and providers set up in the webconfig file. The website does however use a login control to recognise authorised users. Does this mean I've unknowingly been using SQL Server (to support the login control) and I therefore need to install this on the remote machine? Or is it something simpler? Wondered if anybody had seen this error message before?
I'm working with a small ISP/Hosting company and we set up a development server with NT, Site Server, SQL 6.5, and Site Site Commerce Edition. It has been working fine, but the other night their network guy assigned a new IP address to the NT server.
Now SQL server can't talk to/find the NT server. Any time you try to look at anything in Enterprise Manager, it throws the error:
DBLibrary - Server is unavailable or does not exist...general network error.
We can't figure out how/where to tell SQL Server that NT has a new IP address, and get it all working again.
Hi All, I'm running peoplesoft 8.8 on MS-SQL 2000 SP4. When I try to access my peoplesoft application through web and add access some pages, I get some error like "SQL error. Stmt #: 651 Error Position: 0 Return: 8601 - [Microsoft][ODBC SQL Server Driver][SQL Server] fetch: The fetch type refresh not allowed with forward only cursors (SQLSTATE 37000) 16911 " I need to solve this issue at the earliest. Thanks in Advance, Aniruddha.
We have use SQL Server 2005 on 64bit windows 2003 server Cluster. In the application log I noticed the following errors during . When error occurred , i was copying the 45 GB backup file from this machine to another Network machine over 1Gbps network link. The sql server database was used by many user. The SQL resorce probably failed in this failover cluster.We could immediately restart the group.So what could be the cause of the error? anyone has faced this problem ?. Here are the logs in chronology. Any recommended remedy / parameter change to prevent this further (of course besides not copying full backup file online. Normally it's done at night in lean times)
We are seeing the following in our SQLAgent log every minute. I cannot find any information anywhere about this error message.
[298] SQLServer Error: 599, WRITE: The length of the result exceeds the length limit (2GB) of the target large type. [SQLSTATE 42000] (LogToTableWrite)
Over the last couple of years on my development machine, I occasionaly received the error:-
'SQL Server does not exist or access denied.'
when testing my web app. All I had to do was stop SQL server and restart it and the problem would go away.
Unfortunately i'm now getting the error everytime, and no amount of stopping/restarting SQL Server makes any difference. I can make remote connections ok, just can't make any local ones.
Hi there, I access to server SQL by an application on web,I configured the ODBC box for using TCP/IP and the server use also the TCP/IP. I have this message :
Microsoft OLE DB Provider for ODBC Drivers error '80004005' [Microsoft][ODBC SQL Server Driver][Named Pipes]Specified SQL server not found. /medecin/IdentificationAcces/membre_enregistrer.asp, line 108
I have a SQL server scheduled to replication. This works fine if it has to do that one the sever on the same mechine. If it has to be done to another server, the replication fails with the following error message.
08001[Microsoft][ODBC SQL Server Driver][dbnmpntw]Connectionopen(Createfile())
The following function I am trying to design is to INSERT data into a SQL Server 2005 database. It is called from a different function, parse_file();, which is looping through a .CSV file and returning each record as an array to recordInsert();. Here is the function code and SQL syntax
I am receiving the following error when attempting to INSERT into the database.
Code:
[Microsoft][ODBC SQL Server Driver][SQL Server]The name "YFM700RVL" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
I have tried googling the error and since it is a long error, it has been hard trying to find an answer. One solution I found (which wasn't a solution) was to add the '@' infront of the variables. It did not work.
I have a procedure (a) where i call another procedure (b) passing @message as a parameter to procedure B.
Ex: Create procedure a as Begin declare @prevyear exec b @message = 'avvasdva' + cast(@prevyear as varchar) End
When i execute above procedure, i get error at + sign i.e. @message parameter. how can i concatenate string with another parameter when passing parameters
While attempting to configure DTC on a Windows xp Pro, SP 2 machine I receive the error message [DTC was installed by the SQL Server. Please reinstall!] Where do I find this installation file to complete the requested task -- any help would be awesome -- I have tried down loading hotfixes, and security updates that mention fixing problems with DTC -- but alas they did not fix my error ;-)
Hi, I started getting a delay when I try to connect to a SQL Server 2005 server from Management Studio. I get a little pop-up from the quick launch telling me : Is Busy. SQL Server Management is waiting for an internal operation to complete. If you encounter this problem... report it to Microsoft. Has anybody experienced anything similar? If so, have you been able to fix it and how? Thanks in advance
Hi, To be more clear. My problem is : 1) I launched the stataments behing via sql server studio : Use AutClust GO SET NOCOUNT ON; Set statistics IO ON GO select * FROM table_1; Go Set statistics IO OFF GO
2) I have then obtained in tab message the result displayed in text format in tab messages : Table 'table_1'. Scan count 1, logical reads 490, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0.
The objective is to implement those statements in a stored procedure that will be able to recover in automatic manner the content of tab messages. This text is a system response connected to the statements above. I think that exist a system variable which contain the result displayed in tab messages.
I tried tu use @@rowcount it deos not work because this system variable return number of row affacted by last statement.
Does it exist another system variable that could contain the text which is in tab messages?
I do need a solution for this problem. Please bring me your help.
Hi I am trying to learn VB 2005 and I am reaching a step in my studies which requires downloading Sql Server 2005. However every time I attempt to download, I receive this error message.
"SQL Server Setup cannot install files to the compressed or encrypted folder: c:Program FilesMicrosoft SQL Server. To continue, make sure that your installation directories are not compressed or encrypted, or specify a different directory, and then run SQL Server Setup again."
I have tried saving it to another folder, this did not help. Somewhere in my search for answers, I came across something that said I needed a strong Sa authentication or password. I did not have a place to store a password in the setup program and when I went to administration password all my fields were blank, so it should not have needed any password. I also tried the link that this error message directed me to and they said they had no further information on this error.
I have exhausted all the leads, a beginner could possibly come across, except you. Please Help!
Process information: Process ID: 1108 Process name: w3wp.exe Account name: NT AUTHORITYNETWORK SERVICE
Exception information: Exception type: ReportServerException Exception message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Request information: Request URL: http://hodb04/ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=eidr1n55m03smr55uasdkba4&ControlID=ff4568201e0948da9615d136c680ec50&Culture=127&UICulture=9&ReportStack=1&OpType=SessionKeepAlive&TimerMethod=KeepAliveMethodReportViewerControlTouchSession0&CacheSeed=Fri Oct 19 12:55:37 2007 Request path: /ReportServer/Reserved.ReportViewerWebControl.axd User host address: 172.16.10.12 User: THRIFTYFOODSsruescher Is authenticated: True Authentication Type: Negotiate Thread account name: NT AUTHORITYNETWORK SERVICE
Thread information: Thread ID: 10 Thread account name: NT AUTHORITYNETWORK SERVICE Is impersonating: False Stack trace:
Custom event details:
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
