SQL Sever 2005 Management Studio - Connect As Different Windows User
Jun 22, 2007
I want to connect to a SQL server from my workstation using the application in the Subject, but I need to connect as a different Windows user. Basically, I login to my workstation with my "Joe User" account, but for servers I used my "Joe Admin" account for security purposes. However, the Management console autofills in my workstation username when I select "Windows authentication" for the connection, and grays out the username/password fields so that I cannot specify another set of credentials.
Is there a way to change this behavior? Otherwise I will need to termserv into a server using my administrative account, install the management software there, and then begin the process. That is a lot of unecessary overhead that I would like to avoid.
Thank You,
John G
View 4 Replies
ADVERTISEMENT
Jun 28, 2007
Is there a way to connect to database using Windows authentication as a different user than what you've logged in with to your desktop?
For example:
I log on to my desktop as mydomainme. I'm developing queries using Management Studio against a database (on another server) where mydomainme doesn't have access, but the admins have granted access to mydomainJobs1. I have the password for mydomainJobs1, and I'm hoping I can connect to the database using that account without having to log-off my local desktop as mydomainme and then re-login using mydomainJobs1.
The analogy in the file/share-permissions world would be using "net use" from a command prompt:
net use \SomeServer /User:mydomainJobs1 jobs1password
Anything similar for SSMS?
View 1 Replies
View Related
May 7, 2007
New server - Windows 2003 with latest patches (always up to date)
Symantec Antivirus Coporate Edition 10.1
SQL 2005 Workgroup Edition
If I run SQL Server Management Studio, it connects fine to the server.
Then attach a datafile for my application which is installed on the server.
I can run app and open database. All works fine.
Then if I try to run SQL Server Management Studio again it can't connect:
TITLE: Connect to Server
------------------------------
Cannot connect to HACSRV03.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) (Microsoft SQL Server, Error: 87)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=87&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
This server is not a production server, as only just installing - like it works fine and then just fails without warning.
Help!!!
View 1 Replies
View Related
Jan 9, 2007
hi,
I have some SQL CE database .sdf file on my handheld, and I was trying to connect to that file via SQL Server 2005 Management Studio, and it does not work. I am wondering if there is any good tool that I can use on desktop to connect to sqlce .sdf database file on my handheld?
Thanks.
View 1 Replies
View Related
Oct 12, 2007
Hi,Can I use SQL 2005 Management studio to connect to SQL 2000 server?
View 1 Replies
View Related
Jan 8, 2008
Hi all,
I have Sqlserver2005 express edition installed on my pc. Now I wud like to install Sql sever2005 management studio express edition.
Can I do this or do I need delete the existing one to this?
Thanks in advance.
View 2 Replies
View Related
Aug 1, 2007
I am unable to connect to my database on a VPS server using server management studio express. I am able to ping the server. can connect to a local database but i have the same issue as others
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
have set the server so that it will allow remote connections and reset the server just to make sure that it has been implemented.
when i use osql in command prompt to make a test connection it tells me this
[SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server
[SQL Native Client]Login timeout expired
[SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
on this forum it says to perform a ping and and an a ping a- to my server which does work.
Have been working on this for 3 days and can't figure it out.
Even had a guy in New Zealand who is usually my messiah of SQL and he can't figure it out so I'll be impressed if someone knows the answer.
I will buy a crate of beer for the person who solves this for me as this problem is costing me money! Maybe even 2 if done by end of tomorrow 6pm GMT!
If you don't want the beers, i will be more than happy to give a virtual pat on the back. :-)
If you need any more info, i will be watching this thread like a hawk so i'll happily answer any questions that you may have if i can.
Thanks in advance
View 3 Replies
View Related
Jun 28, 2007
Hello,
I would like some help in uploading a database from my harddrive to a server using sql server management studio express.
If I try to attach it to the server, this program only looks at the files on this server and not on my harddrive. So how can I copy a sql database to my folder on the server.
I am sure it must be a simple problem, but I've been bizzy with it for about a day now. So, please advice.
Rgds,
Wouter.
View 7 Replies
View Related
Jun 28, 2006
hi
i have created a .aspx page and a sql database in visual studio ,, my question is how can i connect that database in SQL Server Managment Studio?
View 3 Replies
View Related
Apr 25, 2007
Iam running sql sever 2005 express with advanced services but when i try to launch sql sever management studio express, i get the following message message and i have no idea why.
unhandled exception has occurred in a component in your application. If you click continue the application will ignore the this error and attempt to continue .
Can not create a stable key under a volatile parent key.
View 7 Replies
View Related
Apr 23, 2008
Hello,
I am creating a windows application that is not going to be used in a controlled environment like a LAN or some other network, so I want to include a local database in the install of this app. Ideally, I would like to use SQL 2005 Express like you would MSDE or Access, but I am not sure if the user must have SQL Server installed on their machine in order for this to work and I don't have a machine without it to test on.
Any help on this is greatly appreciated.
Thanks,
Derek
View 1 Replies
View Related
May 29, 2008
Hi,
Pls let me know if SQL Server 2005 Management Studio (client tools only) is compatible with Windows Server 2000 or not?
Thanks in advance.
Regards,
Bhuvana
View 1 Replies
View Related
Jan 17, 2008
Hi all,
In my SQL Server Management Studio Express (SSMSE), I executed the following sql code suuccessfully:
--insertNewRocord.sql--
USE shcDB
GO
CREATE PROC sp_insertNewRecord @procPersonID int,
@procFirstName nvarchar(20),
@procLastName nvarchar(20),
@procAddress nvarchar(50),
@procCity nvarchar(20),
@procState nvarchar(20),
@procZipCode nvarchar(20),
@procEmail nvarchar(50)
AS INSERT INTO MyFriends
VALUES (@procPersonID, @procFirstName, @procLastName, @procAddress,
@procCity, @procState, @procZipCode, @procEmail)
GO
EXEC sp_insertNewRecord 7, 'Peter', 'Wang', '678 Old St', 'Detroit',
'Michigon', '67899', 'PeterWang@yahoo.com'
GO
=======================================================================
Now, I want to insert a new record into the dbo.Friends table of my shcDB by executing the following T-SQL and Visual Basic 2005 codes that are programmed in a VB2005 Express project "CallshcDBspWithAdoNet":
--Form1.vb--
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form1
Public Sub InsertNewFriend()
Dim connectionString As String = "Integrated Security-SSPI;Persist Security Info=False;" + _
"Initial Catalog=shcDB;Data Source=.SQLEXPRESS"
Dim connection As SqlConnection = New SqlConnection(connectionString)
connection.Open()
Try
Dim command As SqlCommand = New SqlCommand("sp_InsertNewRecord", connection)
command.CommandType = CommandType.StoredProcedure
EXEC sp_insertNewRecord 6, 'Craig', 'Utley', '5577 Baltimore Ave',
'Ellicott City', 'MD', '21045', 'CraigUtley@yahoo.com'
Console.WriteLine("Row inserted: " + _
command.ExecuteNonQuery().ToString)
Catch ex As Exception
Console.WriteLine(ex.Message)
Throw
Finally
connection.Close()
End Try
End Sub
End Class
===========================================================
I ran the above project in VB 2005 Express and I got the following 5 errors:
1. Name 'EXEC' is not declared (in Line 16 of Form1.vb)
2. Method arguments must be enclosed in parentheses (in Line 16 of Form1.vb)
3. Name 'sd-insertNewRecord' is not declared. (in Line 16 of Form1.vb)
4.Comma, ')', or a valid expression continuation expected (in Line 16 of Form1.vb)
5. Expression expected (in Line 16 of Form1.vb)
============================================================
I know that "EXEC sp_insertNewRecord 6, 'Craig', 'Utley', '5577 Baltimore Ave',
'Ellicott City', 'MD', '21045', 'CraigUtley@yahoo.com' "in Line 16 of Form1.vb is grossly in error.
But I am new in doing the programming of T-SQL in VB 2005 Express and I am not able to change it.
Please help and advise me how to correct these problems.
Thanks in advance,
Scott Chang
View 22 Replies
View Related
Jan 23, 2008
Hi Jonathan Kehayias, Thanks for your valuable response.
I had a hard time to sumbit my reply in that original thread yesterday. So I created this new thread.
Here is my response to the last code/instruction you gave me:
I corrected a small mistake (on Integrated Security-SSPI and executed the last code you gave me.
I got the following debug error message:
1) A Box appeared and said: String or binary data would be truncated.
The statement has been terminated.
|OK|
2) After I clicked on the |OK| button, the following message appeared:
This "SqlException was unhandled
String or binary data would be truncated.
The statement has been terminated."
is pointing to the "Throw" code statement in the middle of
.......................................
Catch ex As Exception
MessageBox.Show(ex.Message)
Throw
Finally
..........
Please help and advise how to correct this problem in my project that is executed in my VB 2005 Express-SQL Server Management Studio Express PC.
Thanks,
Scott Chang
The code of my Form1.vb is listed below:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form1
Public Sub InsertNewFriend()
Dim connectionString As String = "Data Source=.SQLEXPRESS;Initial Catalog=shcDB;Integrated Security=SSPI;"
Dim connection As SqlConnection = New SqlConnection(connectionString)
Try
connection.Open()
Dim command As SqlCommand = New SqlCommand("sp_insertNewRecord", connection)
command.CommandType = CommandType.StoredProcedure
command.Parameters.Add("@procPersonID", SqlDbType.Int).Value = 7
command.Parameters.Add("@procFirstName", SqlDbType.NVarChar).Value = "Craig"
command.Parameters.Add("@procLastName", SqlDbType.NVarChar).Value = "Utley"
command.Parameters.Add("@procAddress", SqlDbType.NVarChar).Value = "5577 Baltimore Ave"
command.Parameters.Add("@procCity", SqlDbType.NVarChar).Value = "Ellicott City"
command.Parameters.Add("@procState", SqlDbType.NVarChar).Value = "MD"
command.Parameters.Add("@procZipCode", SqlDbType.NVarChar).Value = "21045"
command.Parameters.Add("@procEmail", SqlDbType.NVarChar).Value = "CraigUtley@yahoo.com"
Dim resulting As String = command.ExecuteNonQuery
MessageBox.Show("Row inserted: " + resulting)
Catch ex As Exception
MessageBox.Show(ex.Message)
Throw
Finally
connection.Close()
End Try
End Sub
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
InsertNewFriend()
End Sub
End Class
View 6 Replies
View Related
Aug 28, 2006
Can I connect to remote SQL 2005 server through SQL Server Management Studio Express? I always get a error code 18456 when I try to connect to SQL 2005 server through SQL Server Management Studio Express. I'm sure I enter correct username and password!
View 3 Replies
View Related
Aug 8, 2007
Hello,
I just installed SQL Server 2005 Enterprise edition from my company's DVD. It was installed with the setting of using both Integrated windows authenitication as well as basic named authenication. I installed all the options too: Database Engine, Analysis Services, Reporting Services, SQL Server compact edition, and Integration Services. When I look at services there are: SQL Server Integration Services, SQL Server Analysis Services, SQL Server Reporting Services, and SQL Server Browser. All of which are running. Something that took me offguard was the installation did not ask me to provide an SA password. Other than that, the install looked like it went good.
I was able to connect to the local instance of the SQL Server 2005 using the SQL Server Management Studio. I could connect with SA, or connect with Integrated Windows Authenication. Whoohoo. Off and running! As a matter of fact, for the SA account I could use any password and it would still log me in.
First thing I did was I went in to the copy wizard to attempt to copy a database from a server on our network to my local box. First it asked me for the remote server. Then when I specified my local instance in the wizard, the wizard complained that my local instance was NOT SQL Server 2005. Doh! This I didn't understand. I figured maybe I need to check for MS updates. Sure enough, I found that ther was a SP2 and then a hot-fix for that SP2. I applied both. Now I cannot connect from SQL Server Management studio to my local instance of SQL Server 2005 database server. I get the following error:
"An error occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)"
However, I went in to see what other services I could connect to, and here's the results:
Analysis Services : OK!
Reporting Services (Windows Auth/Basic/Forms) : NG "The reporting Services Instance could not be found (Microsoft.SqlServer.Management.UI.RSClient)"
SQL Server Compact Edition : NG "The database cannot be found. Check the path to the database. [ File Name = CCG092 ] (SQL Server Compact Edition ADO.NET Data Provider)
Integration Services : OK!
I can connect to other SQL Server databases on our network. However, just not my local one. No one on the network can connect to me either.
I even turned off my windows firewall and still no luck connecting to my own.
So something really went wrong when I applied SP2, however, admittedly from the error message when I tried to use the copy wizard, something was probably already wrong.
Any ideas?
Thanks!
View 4 Replies
View Related
Mar 10, 2006
I've seen the following error posted when people try to connect to their server via their applications but didn't see anyone having problems when trying to connect with SQL Server Management Studio Express. Am I missing something here? This is the error:<<An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)>>The server is not remote so I don't see why I need to enable remote connection. I am also using the default connection settings.
View 3 Replies
View Related
Feb 24, 2007
On my home machine without permanent network connections enabled, I cannot get the Management Studio connect to the database server. Always get this error:
Cannot connect ot MPLIAMSQLEXPRESS
Additional Information:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, erro: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I have used the SQL Surface Area Configuration Tool to reset the defaults to allow remote connections, stopped and restarted the server, but still get the same message.
Please help.
View 12 Replies
View Related
Feb 18, 2006
Hi All,
I have a brand new install of sql server 2005 on brand new WINDOWS SERVER2003 with latest versions. Every thing works fine excepting I get a 404 when I connect to report server from management studio..
I am even able to publish reports and all the
url://localhost/reportserver
url://localhost/reports
url://localhost/reportserver/reportbuilder/reportbuilder.application
all work fine on local machine and with in the network behind the fire wall.
But when I try to connect to report server using management studio on the local server or remote server, I get the following error.
"
TITLE: Microsoft SQL Server Management Studio
------------------------------
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
ADDITIONAL INFORMATION:
The request failed with HTTP status 404: Not Found. (Microsoft.SqlServer.Management.UI.RSClient)
"
More techinal details
"===================================
Cannot connect to xxxxxxxxxxxx.
===================================
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.MissingEndpointException.ThrowIfEndpointMissing(WebException e)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The request failed with HTTP status 404: Not Found. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
Program Location:
at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
"
Any help would be greatly appreciated.
Bob
View 27 Replies
View Related
Apr 25, 2008
hello,
I have a question about opening files in the Microsoft SQL Server 2005 Management Studio.
In the old Query Analyzer from SQL 2000 I can open SQL Files via drag & drop (from explorer to QA) or open it with a double click in the explorer. Then the Files opened, if I had actual a connection to a server / database (QA is stared with one file and has a connection to Server/Datebase), with this connection.
Now in Microsoft SQL Server 2005 Management Studio I'll be asked everytime for Server and have to get the database from the database list - it does not connect automaticly to server/database, that is actual connected (I have opened a file with the connection and a connected database in the object explorer).
Someone do not have this problem - but we found no option to set it up.
Any ideas?
thanks &
best regards,
Christian Kiedels
View 9 Replies
View Related
Mar 5, 2008
Hi all,
For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area":
(1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the
following: Select Computer
The Surface Area Configuration of this surface area of this computer or a remote computer.
Specify a computer to configure: O Local computer
O Remote computer
Should I choose the "Local computer" or the "Remote computer" option?
(2) Below the "Configure Surface Area for localhost [change computer]",
I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS
|-| Database Engine
Service
I picked => Remote Connection
On the right-hand side, there are: O Local connections only
O Local and remorte connections
O Using TCP/IP
O Using named pipes only
O Using both TCP/IP and named pipes
Should I choose O Local and remorte connections and O Using named pipes only?
Please help and tell me what options I should choose in (1) and (2).
Thanks in advance,
Scott Chang
View 10 Replies
View Related
Sep 28, 2007
Hi all,
I want to do SQLCLR by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express and I have read the following articles and books:
(i) Connecting to SQL Express User Instances in Management Studio in http://blogs.msdn.com/sqlexpress/archive/2006/11/22/connecting-to-sql-express-user-insta...
(ii) Managing SQL Server Express with SQL Server 2005 Management Studio Express Edition in http://www.microsoft.com/technet/sql/2005/mgsqlexpwssmse.mspx
(iii) Chapter 16 - Going Beyand Transact-SQL: Using the SQL Common Language Rutime (SQLCLR) in Microsoft SQL Server 2005 Express Edition for Dummies
(iv) Chapter 21 - Working with the Common Language Runtime in Microsft SQL Server 2005 Programming for Dummies
(v) Chapter 4 - Introduction to Common Language Runtime (CLR) Integration in Programming SQL Server 2005 by Bill Hamilton.
I want to create an SQLCLR project "HelloWorld" by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express. But I am still not sure how to get it started, because I do not understand the following things:
(1) Pipe Name for a User Instance, (2) Enabling (or Disabling) the CLR by using Transact-SQL, (3) Creating a Transact-SQL script, (4) Creating an Assembly, (5) Creating a backup device, etc. I need to see some simple examples of SQLCLR by Connecting to SQL Express User Instances in Management Studio via VB 2005 Express. Please help and tell me where in the websites I can find them.
Thanks in advance,
Scott Chang
View 5 Replies
View Related
Aug 29, 2007
Hi,
I am having a very frustrating problem trying to connect to a remote SQL Server 2005 at my ISP. When I try to connect through Management Studio the ISP SQL Server returns an error of 'Login failed for user xxx (18456)'.
According to the ISP they can see my connection attempt in their logs.
However, I can access the same SQL Server through Visual Studio, and UDL files using exactly the same credentials.
The ISP have given up, and this is driving me crazy!
I will be very, very grateful for any help or suggestions.
Thanks,
Martin
View 3 Replies
View Related
Apr 9, 2007
I can connect to my SQLEXPRESS on the same box when I use the default connection, but when I specify TCP/IP in the Network Protocol, I get the dreaded (provider: SQL Network Interfaces, error:26 - Error Locating Server/Instance Specified).
I can access the port with telnet and I can run "SQLCMD -S TCP:<servername>SQLEXPRESS,1433 -U username -P password -q"Select * from <table>" and they both work fine.
Ultiimately my goal is to connect via IIS and PHP, but that is failing right now and I figure it'll keep failing until I can connect Management Studio using TCP.
I can also run the SQLCMD from my other box when the firewall is shutdown. I'm out of ideas? Any thoughts?
View 4 Replies
View Related
Oct 24, 2015
I am asking a dummy question. I downloaded SQL Express 2014 and can't find the management studio from Windows 8.
View 2 Replies
View Related
Mar 22, 2007
I€™m unable to connect to SQL Management Studio. I get the following error:
===================================
Cannot connect to serverabc
. ===================================
Client found response content type of 'text/html; charset=Windows-1252', but expected 'text/xml'. The request failed with the error message: --
body
{font-family:'Verdana';font-weight:normal;font-size:.7em;color:black;}
p
{font-family:'Verdana';font-weight:normal;color:black;margin-top:-5px;}
b
{font-family:'Verdana';font-weight:bold;color:black;margin-top:-5px;}
H1
{font-family:'Verdana';font-weight:normal;font-size:18pt;color:red;}
H2
{font-family:'Verdana';font-weight:normal;font-size:14pt;color:maroon;}
pre
{font-family:'Lucida Console';font-size:.9em;}
.marker
{font-weight:bold;color:black;text-decoration:none;}
.version
{color:gray;}
.error
{margin-bottom:10px;}
.expandable
{text-decoration:underline;font-weight:bold;color:navy;cursor:hand;}
Server Error in '/' Application.
Server cannot access application directory '\{server}{share}'. The directory does not exist or is not accessible because of security settings. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Server cannot access application directory '\{server}{share}'. The directory does not exist or is not accessible because of security settings.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[HttpException (0x80004005): Server cannot access application directory '\{server}{share}'. The directory does not exist or is not accessible because of security settings.]
System.Web.HttpRuntime.EnsureAccessToApplicationDirectory() +72
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +263
[HttpException (0x80004005): ASP.NET Initialization Error]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +982
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +128
Version Information: Microsoft .NET Framework Version:1.1.4322.2300; ASP.NET Version:1.1.4322.2300 --. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------ Program Location: at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString) at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject() at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci) at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci) at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
I believe the problem is the server has ASP 1.1 and ASP 2.0 installed and Management Studio is trying to use ASP 1.1 (see highlight section). If I go into IIS and disable ASP 1.1 I get an 404 error when trying to connect to Management Studio. Is there a way to force Management Studio to use ASP 2.0? I can't uninstall ASP 1.1 because this is a dev server and other apps use ASP 1.1.
View 2 Replies
View Related
Sep 10, 2007
Hi,
I am currently looged into the OS (windows xp pro,belongs to domian ABC) as user vdm.
I have connected to VPN for a client and would now like to connect to their sql server database using sql server management studio. This sql server installation is on a remote domain called XYZ.
When I open sql server studio and select windows authentication, my local domain ABC is selected and greyed out...I would like to change this to XYZ domain...how to achieve this ?
thanks in advance
View 5 Replies
View Related
Feb 6, 2008
When I try to connect to my sql server 2005, from a asp.net web application (asp.net development server) using...
Database=Prism_Project_db; Server=(local); Integrated Security=SSPI; MultipleActiveResultSets=True
... as the connection string, i get:
Cannot open database "Prism_Project_db" requested by the login. The login failed.
Login failed for user 'R-LAPTOPRyan Holdren'.Yet I can connect using sql server management studio, no problem:
Server Type: Database Engine
Server: R-Laptop
Authentication: Windows Authentication
which connects as "R-LAPTOPRyan Holdren".
I do not understand how the login could work for one application and not for another. Can anyone help me get this working?
Ryan
View 8 Replies
View Related
May 19, 2008
Hi,
I am using Windows vista ultimate 32 bit. I installed SQL Server 2005 developer edition on my machine it installed ok but i cant open sql management studio. I have just installed SQL Server 2005 and SP2. but didnt get it working. I dont have any SQL Server Express or visual studio installed on the machine. I can see an icon of sql management studio in the programms menu When i try to open sql management studio it gives me an error saying "Progarm is closing" and it closes the whole SQL Server. Can any one help me please what is going wrong and where thanks in advance.
View 1 Replies
View Related
Dec 18, 2007
Hi All!
Anyone know if is possible to disabilitate windows authentication with management studio for sqlexpress?
thanks
Marco
View 4 Replies
View Related
Apr 24, 2007
Iam trying to connect to local copy of sql sever express from the command prompt with this command(sqlcmd) but i get the error below. What should i do to overcome the error. Basically what i want to do is to try out some commandline backup utilities and i deadly want to know how to do a backup from the command prompt. Help is greatly appreciated.
HResult 0x2, level 16, state 1
Named pipes provider: could not open a connection to sql sever [2]
sqlcmd: Error: Microsft sql native client: An error has occurred while estarblishing a connection to the sever. When connecting to sql sever 2005, this failure may be caused by the fact that under the default settings SQL sever does not allow remote connections..
Sqlcmd: Error: Microsoft sql native client: Login time out expired.
View 3 Replies
View Related
Sep 6, 2006
I recently upgraded from SQL Server 2000 to SQL Server 2005. I have Oracle databases I need to share data with. I was using the Heterogeneous Services (hsodbc) from Oracle and connected to SS 2000 fine. Since I've upgraded, I can't use hsodbc to connect to my SS 2005 database. I get the following error:
ORACLE GENERIC GATEWAY Log File Started at 2006-09-06T09:40:07
hoainit (3): ; hoainit Exited with retcode = 0.
hoalgon (7): ; hoalgon Entered. name = edw.
DB_ODBC_INTERFACE (2085): ; [Microsoft][SQL Native Client][SQL Server]Login
failed for user 'edw'. (SQL State: 28000; SQL Code: 18456)
DRV_InitTdp: DB_ODBC_INTERFACE (2085): ; [Microsoft][SQL Native Client][SQL
Server]Login failed for user 'edw'. (SQL State: 28000; SQL Code: 18456)
nvRETURN (F:WorkConnect_4_6_3srcdrvDRV_BIND.C 356): -2220
nvRETURN (F:WorkConnect_4_6_3srcavNAV_BIND.C 293): -2220
hoalgon (7): ; hoalgon Exited with retcode = 28500.
View 6 Replies
View Related
Dec 22, 2005
THIS IS DRIVING MY CRAZY!!!!
I currently can't connecto to my database in SQL Server 2005 (enterprise) but as soon as I try to use any functions, I get cryptic errors found below. I am about to pull my hair out. Everything was working fine for around 4 days and now everything just blows up. I've tried using both sql authentification and also windows:
Errors I'm getting (print screens):
http://www.photopizzaz.biz/junk/sqlserver_2005_errors_and_resolutions.doc
SQL logs:
http://www.photopizzaz.biz/junk/logs.txt
Event log errors are:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 17809
Date: 12/21/2005
Time: 11:18:34 PM
User: N/A
Computer: BG-SQL2005
Description:
Could not connect because the maximum number of '4' user connections has already been reached. The system administrator can use sp_configure to increase the maximum value. The connection has been closed. [CLIENT: <local machine>]
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 91 45 00 00 14 00 00 00 ‘E......
0008: 0b 00 00 00 42 00 47 00 ....B.G.
0010: 2d 00 53 00 51 00 4c 00 -.S.Q.L.
0018: 32 00 30 00 30 00 35 00 2.0.0.5.
0020: 00 00 00 00 00 00 ......
Event Type: Failure Audit
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 18456
Date: 12/21/2005
Time: 10:34:03 PM
User: N/A
Computer: BG-SQL2005
Description:
Login failed for user 'sa'. [CLIENT: <local machine>]
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 18 48 00 00 0e 00 00 00 .H......
0008: 0b 00 00 00 42 00 47 00 ....B.G.
0010: 2d 00 53 00 51 00 4c 00 -.S.Q.L.
0018: 32 00 30 00 30 00 35 00 2.0.0.5.
0020: 00 00 07 00 00 00 6d 00 ......m.
0028: 61 00 73 00 74 00 65 00 a.s.t.e.
0030: 72 00 00 00 r...
Event Type: Information
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 8561
Date: 12/21/2005
Time: 10:19:51 PM
User: N/A
Computer: BG-SQL2005
Description:
Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 71 21 00 00 0a 00 00 00 q!......
0008: 0b 00 00 00 42 00 47 00 ....B.G.
0010: 2d 00 53 00 51 00 4c 00 -.S.Q.L.
0018: 32 00 30 00 30 00 35 00 2.0.0.5.
0020: 00 00 07 00 00 00 6d 00 ......m.
0028: 61 00 73 00 74 00 65 00 a.s.t.e.
0030: 72 00 00 00 r...
Event Type: Error
Event Source: Report Server Windows Service (MSSQLSERVER)
Event Category: Management
Event ID: 107
Date: 12/21/2005
Time: 4:46:14 PM
User: N/A
Computer: BG-SQL2005
Description:
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
View 1 Replies
View Related
