This code works in the SQL task in dts packages but not in SQL task in SSIS. It would run the file but the problem is that when there is an error it doesn't raise the error in SQL task in SSIS. Anyone can provide me with a solution would be appreciated.
USE MASTER
DECLARE @result int
EXEC @result = xp_cmdshell 'dtexec /f "D:File2.dtsx"'
If (@result <> 0 )
BEGIN
RaisError ('Job Failed.',16,1)
END
Since applying July 2007 Microsoft patches it was noted that we were not able to open the editor for the Script Task component in an SSIS package. We received an error dialog with text similar to 'Engine failed with unknown error. (Microsoft.VisualBasic.Vsa.Dt).' All other solutions provided in the forum did not resolve our issue. It was noted somewhere else that the OLE32.dll seemed to have been affected. We reregistered this file using the command 'regsvr32.exe ole32.dll' and suddenly we were able to get into the editor. I don't know why this fixed the issue, but it did for us in our environment. Good luck!
View 3 Replies View RelatedI have VS 2013 installed in my machine with SQL server 2012 ,I have installed Microsoft data tools for VS 2013,In the integration service project  i used script component when i try to pen the script task its not opening VSTA projects ,its simple ideally without any action.I am facing this issue for past 2 months i tried fixing this problem but no use.
The script  task editor has "Access VSTA to write script using VS 2012".So i installed VSTA tools for 2012 and 2013 but no issue.
But the script component works for VS 2010.I have installed Microsoft Visual Studio tools for VS 2012,VS2012 AND VS 2013.
This issue is occurring for VS 2012 and VS 2013.
hi,
lets say i have an input param calld x.
i want to use it inside sql task:
i try to put if(? = 0)
begin
do somthing
end
but i get an error.
the variable is configured correctly in the mapping input as i have succeeded to do the
same with insert: insert into y values(?)
why it does not work with if statment? how can i use it?
thx,
Tomer
hi !
I have problem here with sql task editor. i have a stored proceedure with 1 input value and 1 output value which needs to be updated in a variable.
stored proc - exec GetRDate ? , ? output
input value is set in a varaible.
I tried giving 1 input and 1 output in the parameter box and result set as fullresultset 1 value for variable -
" failed with the following error: "No disconnected record set is available for the specified SQL statement.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Get Retention Date
what should i give in the parameter and result set
Thanks,
Jasmine
Hi,
Im trying to do an Insert:
INSERT INTO myTable(column1)
VALUES(..)
How can I use my parameter mapping value inside the SQL statement ablove?
Thank you.
This error is pretty persistent. I re-installed VS 2005 and SQL Server 2005 but did not help. Every time I try to open a Script Task editor it gives me the same error regardless of the project or package. DO I NEED TO REBUILD MY SYSTEM ?
===================================
Cannot show the editor for this task. (Microsoft Visual Studio)
===================================
Specified cast is not valid. (Microsoft.VisualBasic.Vsa.DT)
------------------------------
Program Location:
at Microsoft.VisualBasic.Vsa.Dt.VsaIDE.get_ExtensibilityObject()
at Microsoft.SqlServer.VSAHosting.DesignTime.get_ExtensibilityObject()
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.ScriptTaskUI.Dispose()
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.ScriptTaskMainWnd.Dispose(Boolean disposing)
at System.ComponentModel.Component.Dispose()
at Microsoft.DataTransformationServices.Design.DtrPackageDesigner.DoDefaultActionForTask(TaskHost task)
-------
Any help is appreciated.
Gulden
.......
Hi,
I drag the database Backup Task from the toolbox and double-click on it, it shows this error:
Cannot show the editor for this task.
Additional information
Method not found: 'Void Microsoft.SQLServer.Management.DatabaseMaintenance.TaskUIUtils..ctor()'.
(Microsoft.SQLServer.MaintenancePlanTasksUI)
What is the prob with this?
cherriesh
I am using SSIS 2008 tool for developing ETL package. I get below error whenever I click on script task editor.Cannot show Visual Studio 2008 Tools for Applications editor. (Microsoft Visual Studio).
View 2 Replies View RelatedI'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. Â I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters. Â
Dear Friends,
In my controlFlow I have 2 sequence container... Sequence1 goes to Sequence2 if an expression valuate to TRUE.
If the expression value is true, than there isn's any problem and sequence2 runs, but if the expression is FALSE the sequence2 container doesn't run.
OK?
In the case of expression valueate to FALSE I need to generate an error or an information in order to get it in the eventhandler automatic...
I can add a script task to make the package failure... but what I insert in the precedence constraint editor from Sequence1 to the scripttask?
Imagine... the expression from Sequence1 to Sequence2 is a>=b
The expression from Sequence1 to ScriotTask os a<b? (How can I define this only to run when the expression (seq1 to Seq2) is false??
Someone know how?
Regards!
I need to check if the date is Null then use today's date and if not do something else.
If RowModifiedOn IS NULL Then
GETUTCDATE()
ELSE
DATEADD("Hh",@[User::TimeZone],RowModifiedOn)
End If
What do I do wrong here? Can I do something like it?
RowModifiedOn == NULL ? GETUTCDATE() : DATEADD("Hh",@[User::TimeZone],RowModifiedOn)
Thanks.
I am having a problem in the Business Intelligence Development Studio. When I add and try to edit a Script Task or a Script Component, I click on the Design Script button and get one of two errors. For the Script task I get an error that states:
Cannot show the editor for this task. (Microsoft Visual Studio)
For the Script component I get:
Cannot show Visual Studio for Applications editor. (Microsoft Visual Studio)
For some reason or another it just will not start Visual Studio for Applications. I have uninstalled an re-installed several times. I have also researched and discovered that there is a bug when C# tasks are include in the project. However, this is not the case. Please help!
I am trying to put the following as an expression in the SSIS Derived Column Transformation Editor.
DATEADD(DAY, DATEDIFF(DAY, 0, GETDATE()), 0)
It is not allowing it. This works fine in a regular SQL statement.
Does anyone know how I can get this to work?
Hi All
I have seen several posts on this issue but as yet no answer. So i'm hoping that somewhere out there knows what the issue is.
SSIS package queries database creates MS spreadsheets per customer and then emails each customer their list.
Anyway all works fine apart from the fact that the Excel Destination Editor converts the date from uk to us format. My routine is already using an MS Excel template (correctly formatted) which it copies as part of the package.
Any ideas anyone?
rgds
Hi,
I am not comfortable with DTS 2000 but I need to execute a encapsulated DTS 2000 package from a SSIS package. The real problem is when I need to pass SSIS variables to DTS 2000 package. The DTS 2000 package have 3 global variables that I can identify on " Execute DTS 2000 Package Task Editor - Inner Variables ". I believe the SSIS variables must be mapped on " Execute DTS 2000 Package Task Editor - OuterVariables ". How can I associate the SSIS variables(OuterVariables ) to "Inner Variables"? How can I do it? Much Thanks.
João
Does anyone know how to do this using variables? Everytime I try it, I get the
Error: Failed to lock variable for read access with error 0xc00100001.
I also tried it writing a script and still the same error. If I hard code the values into the variables it works fine but I will be running this everday so that it will pull in the current date along with the filename. So the value of the variables will change everyday. Here is my expression:
@[User::Variable] +(DT_WSTR,4) YEAR( GETDATE() )+"0"+(DT_WSTR,2) MONTH( GETDATE() ) + (DT_WSTR,2) DAY( GETDATE() )
The result:
C:Documents and SettingsmroushDesktopOSU20060818
the 20060818 part will change everyday ie.(tomorrow will be 20060819, next day 20060820 and so on.)
I am trying to prove I can use SSIS to connect to a web service. The WS I am trying to connect to was developed by a vendor and covered by a NDA, but I was able to reproduce the issue with a public WS.
Here are the steps to reproduce the issue:
In the Web Services Connection Manager, I entered http://office.microsoft.com/Research/Providers/MoneyCentral.asmx?wsdl in the URL window. I am able to successfully "test" the connection
I pasted the above link into IE and saved the resulting XML as a .wsdl file on my local machine. In the Web Services Task Editor, General Tab, I specify the path to the .wsdl file and click on "Download WSDL" button. No Issues
When I click on "Input" and select "MoneyCentralRemote" from the drop-down for Service, I receive an error message saying "This version of the Web Services Description Language (WSDL) is not supported"
So the questions are:
Did I perform the above steps correctly?
What WSDL versions are supported in SSIS?
How can I tell what WSDL version was used to create the .wsdl I am trying to access?
If the WSDL is an unsupported version, is there a work-around to fix the issue?
Could someone please instruct me on how to use the File System Task Editor to rename a file? I place control on control flow tab, change the operation to rename, from there I am not sure what to do.
View 29 Replies View Related
I am using the "Transfer SQL Server Objects Task" to copy some tables from database A to database B including data.
The tables, primary key constraints, Foreign key, data and all transfers nicely except for "DEFAULT CONSTRAINTS" on the tables.
I have failed to find any option in the "Transfer SQL Server Objects Task" task to explicitly say "copy default constraints". So I guess logically it should happen automatically but it doesn't. I hope it is not a bug :-)
Any option anyone knows will help.
Thanks.
In short, does the €œTransfer SQL Server Objects Task€? support distributed transactions?
In trying to use a €œTransfer SQL Server Objects Task€? in a container using a transaction on the container. The task is set to support the transaction. It is setup to copy table data from several tables from a non-domain server (sql server 2000) to a domain-based server (sql server 2005). I get an error stating, €œThis task can not participate in a transaction€?.
I am wondering if it means exactly what it says €“ this task in SSIS can€™t participate at all. Or does it mean that it won€™t in this scenario for some reason. I attempted a simple copy of data from mssql 2005 to mssql 2005 (same server) and the task still failed). MSDTC appears to be running properly on my machine and such (I can do a simple distributed transaction across linked server to the 2000 server in Query Analyzer (QA)). Also, MSDTC appears to be working on both servers with distributed transaction query tests in QA.
Here€™s the error info€¦
SSIS package "Development BusinessContacts and Products Migration.dtsx" starting.
Information: 0x4001100A at Copy BusinessContacts Data: Starting distributed transaction for this container.
Error: 0xC002F319 at Copy BusinessContacts database table data 1, Transfer SQL Server Objects Task: This task can not participate in a transaction.
Task failed: Copy BusinessContacts database table data 1
Information: 0x4001100C at Copy BusinessContacts database table data 1: Aborting the current distributed transaction.
Information: 0x4001100C at Copy BusinessContacts Data: Aborting the current distributed transaction.
SSIS package "Development BusinessContacts and Products Migration.dtsx" finished: Failure.
The program '[4700] Development BusinessContacts and Products Migration.dtsx: DTS' has exited with code 0 (0x0).
A common issue that I run across with clients is they want only want to process a file if it's finished transmitting to the server. This SQL Server 2005 task reads the properties of a file and writes the values to a series of variables. For example, you can use this task to determine if the file is in use (still be uploaded or written to) and then conditionally run the Data Flow task to load the file if it's not being used. You can also use it to determine when the file was created in order to determine if it must be archived.
http://www.pragmaticworks.com/filepropertiestask.htm
I've created my own posting for this. The original post was here, I apologize: http://forums.microsoft.com/forums/ShowPost.aspx?PostID=2906512&SiteID=1
According to the poster it's not possible. But there has to be some way to do it? Reflection (don't know how)?
I need to get a reference to the task host in an SSIS Task component.
Basically the scenario is this:
I have a custom task I have created. However I would like to validate that the ExecValueVariable is infact a string variable during the validate event of the task. I know how to verify its a string variable. But I can't figure out how to read what the user selected (such as User::Myvariable). The only way I've been able to figure out how to do it, but it only works if you open my custom task UI.
What I did is this:
I've implemented IDtsTaskUI and during the initialize section I wrote:
Sub Initialize(ByVal taskHost As TaskHost, ByVal serviceProvider As IServiceProvider) Implements IDtsTaskUI.Initialize
' Store the TaskHost of the task.
Me.taskHostValue = taskHost
Dim myTask As CustomTask= CType(taskHost.InnerObject, CustomTask)
myTask.myTaskHost = taskHost
End Sub
My Task is named: CustomTask. I have a public variable in my task as follows:
Public NotInheritable Class CustomTask
Inherits Task
Implements IDTSComponentPersist
Public myTaskHost As TaskHost = Nothing
Therefore I pass back the taskhost value to the CustomTask class, and voila I have it.
Problem is, this only works if the custom task calls the initialize method, and this only happens when you open the custom editor.
I then do the validation in my CustomTask class and it works fine, but myTaskHost is null/nothing until you actually open the custom task UI
How do I solve this?
Hello,
I'm just learning SSIS and I've hit my first bump. I am doing a bulk import from a tab delimited text file to an empty sql table that has a Idendity column defined. How do I tell the bulk insert task to skip that column when inserting from the text file. If I remove the identity column it imports the data fine, but I want to create the indentity column in the table too.
Thanks.
Sorry guys, I'm really new to this. Can somebody tell me the easiest way to use the FTP task with a dynamic local path. I just want the FTP task to send whatever file is in the directory I specify.
I'm creating a package that extracts data from a table to a pipe-delimited file. I then use an external process (since using Expressions for it was a nightmare) to rename the file so that it'll reflect the previous month (e.g. April2008_report.txt). Then, I have to FTP that file. That's where my problem is. It seems I need to specify the exact filename on the local path of the FTP task, and since the filename will change each month... well, you see my problem.
Is there a way to tell the FTP task to just send *.txt, or something to that effect?
Thanks in advance for you help!
Thanks,
Mark
Hi ,
I have a master database. Based on certain criteria's I will be creating one new database. Once I have finished the creation, I have to check the value of a particular column in both database tables.
This is actually a status check. if both are not equal i have to update detail database table column value with master column value.
I thought i can use lookup transform for this. The problem is master database table's status datatype and detail table's status datatype is diff.
Can anyone suggest me any other way for this problem?
thanks in advance.
In my package i am loading data from a flat file into multiple tables like table1, table2, table3 all tables have a column called cust_num.
But data for this column cust_num is only coming in table1 and i need to load the data from this column to other tables how can i do this.
I have written the Dynamic TSQL S-Proc. Below is what i wanted to implement in SSIS using foreach loop container as a cursor. But i am little doubtful whether I can achieve the dynamics to this level. I know everything is possible but is it advisable to go for this simple Sproc or SSIS tasks.
I have some 15 tables being populated using this SPROC.
Here is some helpful description
ENTITYNAME gives me the table i need to work
FIELDNAME gives me the field i have to work on
CHANGEDVALUE gives me the value changed in that field
( This three i get from source table which is about 9000 rows and containing 15 possible ENTITY to be work on and 100's of their respective FIELD )
while in Cursors i need to get using these above variables other variables like
FLAG
KeyName
Thrugh SQL1 I get the KeyValue
then using this KeyValue check if the data exist update else insert new data.
QUESTION: IS THIS ADVISABLE to go for SSIS task or just carry with SPROC?
/*******************************************************************************************************/
DECLARE Table_Cursor CURSOR
FOR SELECT ENTITYNAME,FIELDNAME, KEYID, CHANGEDVALUE, UPDATEUSER, UPDATEDATE
FROM dbo.ChangedDimensionStage
OPEN Table_cursor
FETCH NEXT FROM Table_cursor INTO @ENTITY, @FIELD, @KEYID, @VALUE, @USER, @DATE
WHILE @@FETCH_STATUS = 0
BEGIN
DECLARE @FLAG NVARCHAR(50);
SET @FLAG = (SELECT LEFT(@ENTITY, (SELECT CHARINDEX( 'DIM', @ENTITY) -1)) )+ 'LastUpdateFlag';
DECLARE @KeyName NVARCHAR(50);
SET @KeyName = (SELECT LEFT(@ENTITY, (SELECT CHARINDEX( 'DIM', @ENTITY) -1)) )+ 'Key'
DECLARE @KeyValue NVARCHAR(50)
DECLARE @SQL1 NVARCHAR (1000)
SET @SQL1 = N'Select @KeyValueOUT = '+ @KeyName + ' FROM DW_Integration.dbo.MangFact WHERE ClaKey = ' + @KEYID + ' GROUP BY ' + @KeyName + ' HAVING SUM(TotalClaCount) > 0 OR SUM(IncidentOnlyClaCount) > 0 '
EXECUTE sp_executesql @SQL1, N'@KeyValueOUT INT OUTPUT', @KeyValue OUTPUT;
DECLARE @WC_TABLE NVARCHAR(100)
SET @WC_TABLE = 'WorkingCopy' + @ENTITY
DECLARE @SQL2 nvarchar (1000);
SET @SQL2 = 'IF EXISTS (SELECT '+ @KeyName +' FROM ' + @WC_TABLE + ' WHERE ' + @KeyName + ' = ' + @KeyValue + ' )' +
' BEGIN UPDATE ' + @WC_TABLE + ' SET '+ @FIELD + ' = '''+ @VALUE + ''' WHERE ' + @KeyName + ' = ' + @KeyValue +'; END' +
' ELSE BEGIN
INSERT INTO '+ @WC_TABLE + ' SELECT * FROM DW_Integration.dbo.' + @ENTITY + ' WHERE ' + @Flag + ' = ' + '''Y''' + ' AND '+ @KeyName + ' = ' + @KeyValue + ';' +
'UPDATE ' + @WC_TABLE + ' SET '+ @FIELD + ' = '''+ @VALUE + ''' WHERE ' + @KeyName + ' = ' + @KeyValue +'; END'
EXECUTE sp_executesql @SQL2
FETCH NEXT FROM Table_cursor INTO @ENTITY, @FIELD, @KEYID, @VALUE, @USER, @DATE
END
CLOSE Table_cursor
DEALLOCATE Table_cursor
Hello,
I m having an FTP Task in SSIS project, from where I have downloaded .csv file.
And also having a Processed Folder in which the processed .csv files are kept.
Main task is to download file from FTP and check , if the date of downloaded file is newer than file in processed folder, then only process that file. Else skip the processing
Can anyone help me out how to process about.
plz reply as early as possible.
Thanks & Kind regards ....
Aparna
I have written a very basic Script Task using VS 2005, it just looks through a sqlDataReader and display a message.
I want this script to be triggered by an SQL Agent. I am not sure what to do from this point on. How do I publish or whatever it is called to get it to the SQL server or agent?
This is my very first attempt, no I have no clue what I am doing, will need lots of help and tutorials, thanks for reading.
i am trying to generate a dynamic connection string using a variable 'servername'
i know where and how to do it but i am not sure abt the details of the paramenters that are to be passed in the script
and anyone give me a sample script
this is what iam trying to do
Public Sub Main()
'
Dts.Connections("SQL????").ConnectionString = "Data Source????" + Dts.Variables("servername").Value.ToString() + ???windows authentication and what else ????
'
Dts.TaskResult = Dts.Results.Success
End Sub
Thanks all
Hi there,
I'm still pretty new to SSIS, what I am really battling with is getting a custom task to work.
I have developed a custom task, digitally signed it added it to the Global Assembly Cache, written the UI for it - Pretty much as it is done here: http://technet.microsoft.com/en-us/library/ms136080.aspx
but my problem is that when I drag it from the tool box into the control flow pane, I get this message: "The task user interface specified by type name 'XXXXXXXXXXXXXXXXXXX' could not be loaded.
(Microsoft.DatatransformationServices.Design).
Does anybody have an idea of what I am doing wrong here?
Duane.
Dim RootFolder As String
RootFolder = DTSGlobalVariables("gRootFolder")
I have an error that RootFolder is not being declared with this ?
but it is , why is .NET such a heap of sh*t ?