SQL Task Transaction Required
Apr 29, 2008
Hello everybody,
my problem is:
When I try to set the transaction required on a SQL Task, the package will return the following error:
"[Execute SQL Task] Error: Failed to acquire connection "MYDATABASE.ADONET_CONNECTION". Connection may not be configured correctly or you may not have the right permissions on this connection."
But if the connection is made to a SQL Server in the local machine, I can have the transaction required option, if I change the SQL Server Connection to another machine, the task only runs if I get the transaction to the supported option...
Does anyone have any ideia about this problem?
I've googled the problem, but all the possible solutions I've found came to nothing... so I'ved ran out of ideias!
Thanks in advance!
Cheers
View 1 Replies
ADVERTISEMENT
Jul 24, 2007
Hi Guys,
Refering to my previous post I've a package which easily run when transaction mode is Supported but when i put it to Required and All DFs are supported inside the sequence container it won't run.
Well technically it goes and pass step 1, so it goes to green but regardless of what i put in the 2nd DF it won't run. It just hangs in there.
When i check the component service and check DTC, the transaction would be running but never commited.
I have done most of the things about DTC and configuration with the MS articles as this package was failing before but now it just sits at this point.
Any ideas?
Thank you
Gemma
View 3 Replies
View Related
Mar 25, 2008
Hi,
I have created a few packages and i want to execute this in a sequence so I created a wrapper/parent package and added all the other packages as child Package using the Execute Package Task. These packages are file system based packages. I am executing the wrapper/parent package from a web page which will execute all the child packages. All is well and works fine when I choose the TransactionOption as "Supported" in my wrapper/parent package but when I choose the TransactionOption as "Required" in my wrapper/parent package I get the following error
Error Occurred: The package is failed due to following: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024 "The transaction manager has disabled its support for remote/network transactions.".
What I am doing is connecting to 3 DB in the same server and doing some data manipulation. The MSDTC is running in the Target SQL Server and also the DTC Server in my Local is started and running. What else could be the problem.
Thanks in advance for any and all help
View 1 Replies
View Related
Feb 1, 2007
In short, does the €œTransfer SQL Server Objects Task€? support distributed transactions?
In trying to use a €œTransfer SQL Server Objects Task€? in a container using a transaction on the container. The task is set to support the transaction. It is setup to copy table data from several tables from a non-domain server (sql server 2000) to a domain-based server (sql server 2005). I get an error stating, €œThis task can not participate in a transaction€?.
I am wondering if it means exactly what it says €“ this task in SSIS can€™t participate at all. Or does it mean that it won€™t in this scenario for some reason. I attempted a simple copy of data from mssql 2005 to mssql 2005 (same server) and the task still failed). MSDTC appears to be running properly on my machine and such (I can do a simple distributed transaction across linked server to the 2000 server in Query Analyzer (QA)). Also, MSDTC appears to be working on both servers with distributed transaction query tests in QA.
Here€™s the error info€¦
SSIS package "Development BusinessContacts and Products Migration.dtsx" starting.
Information: 0x4001100A at Copy BusinessContacts Data: Starting distributed transaction for this container.
Error: 0xC002F319 at Copy BusinessContacts database table data 1, Transfer SQL Server Objects Task: This task can not participate in a transaction.
Task failed: Copy BusinessContacts database table data 1
Information: 0x4001100C at Copy BusinessContacts database table data 1: Aborting the current distributed transaction.
Information: 0x4001100C at Copy BusinessContacts Data: Aborting the current distributed transaction.
SSIS package "Development BusinessContacts and Products Migration.dtsx" finished: Failure.
The program '[4700] Development BusinessContacts and Products Migration.dtsx: DTS' has exited with code 0 (0x0).
View 9 Replies
View Related
May 30, 2007
Hi there,
We are trying to use SSIS to import data from a flat file. The file contains a mixture of 2 different sets of data - first there are an unknown number of rows that define the column names, and then there are rows of the data itself that are delimeted and that contain the same number of columns as are defined above.
Anyway, the only way we can see to import this data is first via a Script Source task, since for a flat file source we'd need to specify the number of rows to skip, which is unknown at design time. If anyone knows any way of getting round this I'd appreciate your advice.
So in the scrip source task we are looping through the rows in the flat file and writing to 2 output buffers - one for the metadata and one for the data itself.
The problem is the Script Source task only lets you specify output columns at design time, and we don't know what columns to output until run time as the number of delimited columns is unknown.
So does anyone know of a way of either:
Adding output columns for a script source task at run-time OR
Alternatively, we could output the delimited data from the Script Sourceas one long column. If so, what would be the best way of then splitting this up into individual columns?
Many thanks,
Richard F
View 4 Replies
View Related
Mar 7, 2007
1 :Control Flow Excute SQL task: Truncate Table
2: Dataflow Task: Datareader--Script componant--OLE DB Destination (SQL Server 2005--a single table --always around 600,000 rows)
How do I set up a transaction where if there is a failure the Truncate Table command will roll back---and the OLE Destination (A single SQL Server table) will be left the same as before the load started.
Another question with that volume of data --600,000 rows will a truncate table be pratical in a transaction
Any ides welcome
thanks in advance
David
View 3 Replies
View Related
Jun 1, 2006
I've created an SSIS package that contains a Sequence Container with TransactionOption = Required. Within the container, there are a number of Execute Package Task components running in a serial fashion which are responsible for performing "Upserts" to dimension and fact tables on our production server. The destination db configuration is loaded into each of these packages using an XML configuration file. The structure of these "Upsert" packages are nearly identical, while some execute correctly and others fail. Those that fail all provide the same error messages.
These messages appear during Pre-Execute
[Insert new dimension record [1627]] Error: The AcquireConnection method call to the connection manager "DW" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "Insert new dimension record" (1627) failed the pre-execute phase and returned error code 0xC020801C.
... which are followed by
[Connection manager "DW"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
[Connection manager "DW"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
While still in debug mode, I can check the properties of the "DW" connection and successfully test the connection within the packages that fail.
The same packages run successfully when tested outside the container (i.e. no transaction) or when the configuration file is modified to point the "DW" connection to a development version of the db which is running on the same server as the source database.
I have successfully used DTCtester to verify that transactions from source to destination server are working correctly. Also tried setting DelayValidation = True with no change. I have opened a case with Microsoft and am awaiting a reply so I thought I'd throw a post out here to see if anyone else has encountered this and might have a resolution. Here's some more on the environment:
Source Server:
Windows Server 2003 Enterprise Edition SP1
SQL Server 2005 Enterprise Edition SP0
Destination Server:
Windows Server 2003 Enterprise Edition SP1
SQL Server 2000 Enterprise Edition SP3 (clustered)
Thank you in advance for any feedback you might be able to provide.
KS
View 4 Replies
View Related
Nov 6, 2006
I'm making a copy of some tanles between 2 servers.
Server 1 requires a sql login
Server 2 is using Windows Auth.
I have a user on server 1 named "odbc" able to log in.
however my copy task fails, when I drill the error, it's lists the first user in server 1 alphabetically as the failed login???? but in my dts I am specifying the "odbc" user and password.
I think I have a permissions problem on server 1. So my Question, what minimum permissions does user "odbc" need to copy a table?
On server 1 I can copy from northwind to server 2 just fine..but any other db on server 1 causes the weird failure with the wrong username.
Any Ideas? I am not a DBA obviously :)
Thanks,
Carl
View 1 Replies
View Related
Jul 23, 2005
Hallo All,I'm making in my DB some logs.I have a separate table containing:ID,Date,Source,Type,ErrorNo,DescriptionAcctualy the table struct is not immportand that's why I do not postthe script.I have one procedure, which I call in my other function procedures,triggers etc. with parameters.This procedure (WriteToLog) is called, if in other procedures, triggersis any validation, exception or only information which I would like tolog me separately, and it writes the record into this table.But sometimes, it is very hard, to follow much logs, and I figured out,if I could have something like transaction ID, task ID, it will be mucheasier.Firs idea was to, by going from procedures to other procedures, pass aself generated token (ie. date with any additional number). But then, Ineed to change everywhere where I call WriteToLog procedure the callsyntax.Let's say that we have following situation:Procedure1:Action1Select1CompareOfValues1exec WriteToLogAction2CompareOfValues2exec WriteToLogAction3exec Procedure2Procedure2:Action1exec WriteToLogSelect1Insert1Trigger1Started:Action1CompareOfValues1exec WriteToLogAction2Trigger1Exit:Procedure2Exit:Procedure1Exit:Now ... I could pass this my generated number, from SP to SP and so on.But I would like to now, does the MS SQL server has something whatidentifies transaction like descripted below.In this case, I do not need to pass any number, only I need to get thisnumber anyhow in SP WriteToLog, and insert it into my log table.Any sugestions?Thank's in advance.Mateusz
View 3 Replies
View Related
Oct 9, 2007
Hi,
Can we include a Send Mail Task inside a transaction?
We intend to callback a sent email in case there is an error in the subsequent task, if it is possible.
Thanks and Regards,
B@ns.
View 4 Replies
View Related
Oct 30, 2006
We are designing an ETL solution for a BI project using SSIS.
We need to load a dimension table from a source DB into the DW; inside the DW there are two tables for each source dimension table: a current dimension table and a storical dimension table.
The source table includes technical columns that indicate if each record was processed correctly by ETL procedures.
Each row in the source table can be a new record, or an exisisting one. If it's a new record, a corresponding new record should be inserted into the current dimension table of the DW; if it's an exisisting one, a new record should be inserted in the storical dimension table and the existing record in the current dimension table should be updated.
Furthermore for each record we need to update the source table with an error code. If the record was processed with succes the code is zero, otherwise it contains an error code.
I try to use a single data flow task, using the 'ole db command trasformation' task for managing update and 'ole db destination' task for managing insert.
The problem is that some insert and update should be executed inside a single transaction, for each record; for example if the source contains a new record I should insert the record in the current dimension table and update the source record with error code zero if every think goes fine.
There is some way to group task in the data flow pane in a single transaction ?
There is a better way to do that ?
Cosimo
View 12 Replies
View Related
Dec 16, 2007
Hi all,
I am having a simple ssis package. In that i have an sql task that will insert a record in to the database. i find that if i use a simple OLEDB connection it works fine. but the problem comes here when i change the connection string with an valiable. Once i assign the same connection string to a valiable and assign the variable as expression, there after i encounter the following error.
[Execute SQL Task] Error: Failed to acquire connection "DB connection". Connection may not be configured correctly or you may not have the right permissions on this connection.
I am struggling with this for a long time.
Any of you plz suggest me a solution for this problem
Thankz
View 2 Replies
View Related
Jun 30, 2006
I have a simple SSIS package with three "Execute SQL Tasks". I am using ADO.Net Connection to execute SPs on a DB server.
When I execute this package It works fine. So far so good.
Now, I need to implement transation on this package. And problem starts now onwards. When I try to execute package after setting TransationOption = Required for the Sequence container which contains all the tasks, I get following error.
[Execute SQL Task] Error: Failed to acquire connection "NYCDB0008.Export". Connection may not be configured correctly or you may not have the right permissions on this connection.
"NYCDB0008.Export" is the name of the ADO.Net connection. I have been hunting for any solution but all in vain. I have tried changing all DTC settings on the dev as well as Database server.
Please respond if anyone has any solution.
Thanks!
Anand
View 24 Replies
View Related
May 31, 2008
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
View 1 Replies
View Related
Feb 22, 2007
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
View 3 Replies
View Related
Feb 6, 2007
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
View 1 Replies
View Related
Dec 22, 2006
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
View 8 Replies
View Related
Jan 8, 2008
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
View 2 Replies
View Related
Dec 6, 2006
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
View 5 Replies
View Related
Aug 6, 2007
HI,
I have been trying to solve the locking problem from past couple of days. Please help mee!!
Scenario:
--------------
I have a SSIS package in which 2 data flow tasks. 1st data flow task deletes records from a 5 tables and the 2nd data flow task should insert records into 1 of the five tables after the success of 1st data flow task. This scenario runs in Transacation.
The above scenrio in the 2nd data flow task hangs in runtime. It does not complete. with sp_who2 command i could see that there is an intent share lock(LK_M_IS) on the table and the status is SUSPENDED.
I dont know how to come out of this locking. Please help.
Thanks ,
Sunil
View 7 Replies
View Related
Jun 21, 2007
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
View 5 Replies
View Related
Jun 10, 2015
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
View 8 Replies
View Related
Jul 11, 2007
I want to list out the pending transaction for transaction replication by publication.
Help needed.
View 1 Replies
View Related
Nov 14, 2006
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
View 1 Replies
View Related
Jul 27, 2015
I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.
you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]
View 6 Replies
View Related
Jun 1, 2007
Hi
How do I make use of begin transaction and commit transaction in SSIS.
As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:
Hresult:0x80004005
descriptionyntax error or access violation.
its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.
Thanks,
Prashant
View 3 Replies
View Related
Oct 10, 2005
Error returned when trying to commit the transaction to a database that is a replication distributor. (sql2005 ctp16)
View 10 Replies
View Related
Jun 1, 2006
Hi,
I am having some problem with SSIS transaction. Eventhought I tried to imitate the concept that Jamie presented at http://www.sqlservercentral.com/columnists/jthomson/transactionsinsqlserver2005integrationservices.asp
. My workflow is as followed
*********************************
For Each ADO.Record in Oracle (transaction=not supported)
If (Certain_Field_Value = 'A')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence A (Start a Transaction , transaction=required)
INSERT/UPDATE some records in SQLDB(transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'B')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence B (Start a Transaction , transaction = required)
INSERT/UPDATE some records in SQLDB (transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'C')
------------
------------
End ForEach Loop
*************************************
My requirements are that I want separate transaction for each Sequence A, B, C, etc... If Sequence A transaction fails, the other should still be continuing with another transaction.
But I am getting an error regarding the OLEDB Error in next Task (e.g in Certain_Field_Value = 'B') "Lookup Data in SQL DB with values from Oracle ", the error message is ".......Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. ".
What is it that I am doing wrong?
Regards
KyawAM
View 12 Replies
View Related
Jul 1, 2015
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies
View Related
May 4, 2006
Hi,
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
View 17 Replies
View Related
Feb 21, 2008
I am using the "Transfer SQL Server Objects Task" to copy some tables from database A to database B including data.
The tables, primary key constraints, Foreign key, data and all transfers nicely except for "DEFAULT CONSTRAINTS" on the tables.
I have failed to find any option in the "Transfer SQL Server Objects Task" task to explicitly say "copy default constraints". So I guess logically it should happen automatically but it doesn't. I hope it is not a bug :-)
Any option anyone knows will help.
Thanks.
View 17 Replies
View Related
Mar 12, 2008
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
View 7 Replies
View Related
Dec 2, 2005
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies
View Related
