SQL Transaction Log Backup Fails.
Jul 11, 2007
Hi,
I'm a clueless SQL noob trying to set a maintenance plan to backup my databases.
This is SQL 2005 running on Windows SBS 2003 R2.
I've created two maintenance plans one to do a full backup of all DBs and one to do transaction log backups every 4 hours of the databases.
The full backups run but the transaction log backup fails with
DTExec: The package execution returned DTSER_SUCCESS (0). in the logs.
I can run the backup manually from the SQL Studio but not automatically.
Any clues on what can cause this not to work?
Thanks,
nline
View 20 Replies
ADVERTISEMENT
May 7, 2001
My transaction log backup is failing with the following error:
Does anyone know how I can fix it?
(null)
Microsoft (R) SQLMaint Utility (Unicode), Version 8.00.194 Copyright (C) Microsoft Corporation
(null)
Logged on to SQL Server as 'NT AUTHORITYSYSTEM' (trusted) Starting maintenance plan 'Maint Plan - TLogs' on 5/7/2001 8:18:11 AM Backup can not be performed on database. This sub task is ignored. (null)
Thanks
View 2 Replies
View Related
Jan 21, 2004
Our Transaction Log backup job runs every two hours from 7:00am to 8:59pm. Today, our Full backup job and the first Transaction Lob backup job ran successfully. Subsequent Transaction Log Backups have failed with the following error message under Job History:
"The job failed. The Job was invoked by Schedule 13 (Schedule 1). The last step to run was step 1 (Step 1)."
The caveats are that the database is in Full recovery mode and a .TRN file is generated on the server. Also, the SQL Server log says the job ran successfully. Any ideas?
View 7 Replies
View Related
Jul 5, 2002
I have setup a SQL maintenance plan to backup the transaction log file to be backup every one hour M-F.
But now I have been getting the following error:
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Any clues what does this error mean ?
Thanks.
View 2 Replies
View Related
Nov 9, 2004
:eek:
Okay. I changed the times that the transaction logs are backed up, via the built in maintenance schedule. It was then that I started to get failures only on the Transaction log backup for the master. The error that I get from the history log is Backup can not be performed on this database. This sub task is ignored. If I look in the file that is saved to disk :
Starting maintenance plan 'DB Maintenance Plan1' on 09/11/2004 02:30:00
Backup can not be performed on database 'master'. This sub task is ignored.
[1] Database onyx: Transaction Log Backup...
Destination: [R:BACKUPonyxonyx_tlog_200411090230.TRN]
** Execution Time: 0 hrs, 0 mins, 23 secs **
[2] Database onyx: Verifying Backup...
** Execution Time: 0 hrs, 0 mins, 8 secs **
Deleting old text reports... 1 file(s) deleted.
End of maintenance plan 'DB Maintenance Plan1' on 09/11/2004 02:30:31
SQLMAINT.EXE Process Exit Code: 1 (Failed)
I changed the backup back to its original time as this was the only change made. This has not resolved the problem. As I am new to SQL and still finding my feet All the other SQL maintenance plans that I changed are working fine.
Thanks
Steve
View 5 Replies
View Related
Jul 23, 2007
Hi,
I'm running SQL 2005 SP2 and having a problem with a Database Maintenance task created in SSMS doing transaction log backups of all user databases.
When I look at dbo.sysmaintplan_logdetail I see the message:
Database 'Database1' will not be backed up because it does not have its recovery model set to Full or BulkLogged.
Great - that's what we want! Skip the SIMPLE recovery mode databases. However, the next entry is the following error message:
Executing the query "BACKUP LOG [Database1] TO DISK = N'D:\MSSQL$Windows\MSSQL.2\MSSQL\Backup\Database1\Database1_backup_200707231600.trn' WITH NOFORMAT, NOINIT, NAME = N'Database1_backup_20070723160023', SKIP, REWIND, NOUNLOAD, STATS = 10 " failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE. BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Which says to me it is trying to backup the same database(s) it just said it was skipping!
What's going on? I see that there is a fix to a similar error message with the cumulative update KB936305 (http://support.microsoft.com/kb/936305) for maintenance cleanup tasks.
Does anybody else have such a problem?
View 1 Replies
View Related
Oct 5, 2015
If Transaction Log Backup fails due to a conflict could it break the Log Chain?
View 3 Replies
View Related
Jul 19, 2007
Hi
I am using the Simple recovery model and I'm taking a weekly full backup each Monday morning with differentials taken every 4 hours during the day.
On Wednesday afternoon, a programmer ran a process that corrupted the db and I had to restore to the most recent differential. It was 5pm in the afternoon and a differential backup had just occured at 4pm. No problem, I figured.
I restored the full backup from Monday morning and tried to restore the most recent differential backup. The differential restore failed. Since I had used T-SQL for the initial attempt, I tried using Enterprise Manager to try again.
When viewing the backup history, I see my initial full backup taken on Monday plus all the differentials. BUT, on closer inspection, I noticed another full backup in the backup history that was taken early Tuesday morning. I can't figure out where this Tuesday morning full backup came from. It wasn't taken by me (or scheduled by me) and I'm the only one with access to the server. My full backups are usually named something like HCMPRP_20070718_FULL.bak. This erroneous full backup was named something like HCMPRP_03a_361adk2k_dd53.bak. It seemed like it was a system generated name. Not something I would choose. To top it off, I could not find this backup file anywhere on the server and when I tried to restore using this full backup, it failed.
Does anyone have any clues as to where this full backup might come from? Does SQL Server trigger a full backup on its own if some threshold is reached?
I ended up having to restore using the differential taken just before this erroneous full backup and lost a day of transactions.
Any insight is greatly appreciated.
View 3 Replies
View Related
Jul 15, 2015
We take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies
View Related
Mar 11, 2008
Hello, everyone:
I just heard that for restore purpose, ths full backup and transaction log backup should be from one maintenance plan. Otherwise transaction log backup files cannot be restored after restoring full backup files.
Is it true? Can anyone offer official documents?
In my system, full and transaction backups are from one maintenance plan. Restores are doing fine. I am not sure that ideal is true or not.
Thanks
ZYT
View 2 Replies
View Related
Jun 13, 2007
what is the differences between a differenctial backup and transaction log backup?
View 1 Replies
View Related
Oct 14, 2007
I neglected to backup the transaction log as part of the process of backing up the database. Now i only have the backup file for the database and no transaction log backup. When i try to do a restore on the database, i get the error on a "tail log missing" message (which i'm assuming is that it's looking for the t-log backup?).
Is it possible to restore or even restore to a new database? I'm only looking to retreive data from 2 tables within the backup file.
Thanks!
SQL Server 2005 on Windows 2003 Server x64.
View 16 Replies
View Related
May 12, 2008
Hi All
I have parent package which is having the Execute Sql task , which execute the script provided by file connection , after that it calls the child package thru Exceute Package task , I have set the Parent package's Transaction property as "Required" & child's as "Support" , as I run the package child package gets hang .. but it started running when I put the direct input instead of script in my parent package . Can you plz help why this is happening & what is the solution because I require that script file
Kind Regards
Renuka
Renuka.M.Popli
View 2 Replies
View Related
Nov 6, 2007
Hi guys,
I have some triggers that insert data in a table located in a remote server. If the remote server happens to be down I want to continue with the original transaction anyway. Can I use a BENGIN TRY BEGIN CATCH block to continue with the transaction in the trigger and also insert the data into a temporal local table if the remote insert fails?
Regards
View 3 Replies
View Related
Nov 24, 2003
SQL Server 2000, C#, ASP.NET and ADO.NET. I have searched for 3 days trying to figure out why my ADO.NET Transaction executes my stored procedures and runs the .COMMIT() on the server, figured this out by using the SQL Profiler, but the data doesn't show up in the database tables and I recieve no error from SQL or ASP.NET. What gives???? Anyone else ever heard of such a thing. Please help, before I loose my sanity.
View 4 Replies
View Related
May 18, 2015
I have one SP in which I am opening transaction and on fail I am rolling back transaction.
Is there any way I can preserve data in temp table before failing record.
I means to say At record no 21 get failed I need to see 20 records in any temp tables.
View 11 Replies
View Related
Dec 17, 2007
Guys I was wondering if you can help me figure out the problem with the script.
1) I am getting the following error message on one of the job which is backing up all the databases on the server.
...ges for database 'AdminWorkFlow_Reports', file 'AdminWorkFlow_Reports_Data' on file 1.
[SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'AdminWorkFlow_Reports',
file 'AdminWorkFlow_Reports_Log' on file 1. [SQLSTATE 01000] (Message 4035) Backup or
restore operation successfully processed 433177 pages in 64.328 seconds (55.163 MB/sec).
[SQLSTATE 01000] (Message 3014) Processed 113720 pages for database 'BMSRep', file 'BMS_Data'
on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'BMSRep', file '
BMS_Log' on file 1. [SQLSTATE 01000] (Message 4035) Backup or restore operation
successfully processed 113721 pages in 17.200 seconds (54.162 MB/sec). [SQLSTATE 01000]
(Message 3014) Processed 208 pages for database 'EmailAddress', file 'EMailAddress_STGE_Data'
on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'EmailAddress',
file 'EMailAddress_STGE_Log' on file 1. [SQLSTATE 01000] (Message 4035) Backup or restore
operation succe... The step failed.
Not sure where to start. I looked up the backup script it looks fine.
BackUp Database AdminWorkFlow_Reports to Disk = 'q:\AdminWorkFlow_Reports12-17-2007.bak'
--
--
--
--
BackUp Database EmailAddress to Disk = 'q:\EmailAddress12-17-2007.bak'
2)Also I have another script which for some reason doesn't run on some nights. Its enabled and the job is scheduled daily but its not running for about a week.
SQL server agent is running though.
Any help in this regard would be appreciated.
View 5 Replies
View Related
Jul 18, 2007
Hi
We have a nightly job on a production server which backs up all databases
(about 90 on the server)
Sometimes it'll only backup some of them, yet it reports success.
Our proc to manage the process is below:
Any ideas on what we need to do to make it reliable ?
-----------------------------------------------------
DECLARE @DB_Name varchar(32)
DECLARE @Backup_Path varchar(255)
DECLARE @Backup_Name varchar(255)
DECLARE DB_Cursor CURSOR FOR SELECT NAME FROM sysdatabases
OPEN DB_Cursor
FETCH NEXT FROM DB_Cursor INTO @DB_Name
WHILE @@FETCH_STATUS = 0
BEGIN
IF @DB_Name <> 'tempdb' AND @DB_Name <> 'model'
BEGIN
print '--------------------------------<< ' + @db_name + '
>>--------------------------------'
SET @Backup_Path = N'd:sql2005backupsightly' + @DB_Name + 'Daily' +
'.bak'
SET @Backup_Name = @DB_Name + N' backup'
BACKUP DATABASE @DB_Name TO DISK = @Backup_Path WITH INIT
print ''
END
FETCH NEXT FROM DB_Cursor INTO @DB_Name
END
Print "Finished backing up the databases"
CLOSE DB_cursor
DEALLOCATE DB_cursor
View 8 Replies
View Related
Nov 4, 2005
I have a trans log backup that runs every 15 minutes on san, works fine until I do a backup after a large load. I get the below error message. Anyone had this before?
Executed as user: DPSCSDOMsqlexec. The file on device 'n:sqllogsmdentallgdmp' is not a valid Microsoft Tape Format backup set. [SQLSTATE 42000] (Error 3242) BACKUP LOG is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step fail
View 4 Replies
View Related
Jul 2, 2001
I am trying to backup a database to a tape. It works when it wants to. I get a 3013 error. The drive is fully functional. Seagate backup works fine. SQL Backup does not. I think it might be that the tape needs retensioning sometimes. Here is the sql statement: BACKUP DATABASE pubs TO TAPE='.ape0' WITH FORMAT. Is there a retension parameter I am failing to see?
View 2 Replies
View Related
Feb 11, 2007
HelloI'm seeing the backup using SMO fails with big databases (>15GB). Ihave a 2GB database and I can see the command go thru. in Profiler butafter it's about 50-70% done, I get an exception saying backup failed.There is no details on the SQLServer log.Here's the code snippet:bk.Initialize = m_backupInit;bk.PercentCompleteNotification = 10;bk.PercentComplete += newPercentCompleteEventHandler(bk_PercentComplete);bk.SqlBackup(m_Server);Here's the command as captured by SQL-Profiler:BACKUP DATABASE [Test_MODEL] TO DISK = N'D:TempTest_Model_Backup.dat' WITH NOFORMAT, INIT, NOSKIP, REWIND,NOUNLOAD, STATS = 10Has anyone else seen this. The wierd thing is it works using old SQL-DMO.thanksSunit
View 1 Replies
View Related
Jun 13, 2006
I've problems with backing up the certificate (on the Witness Server). On principal and mirror, it works fine (Win 2003 Server, US English), but on my local PC (XP Prof, German) what i use as witness Server following backup command raises an error:
USE master;
CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'something$Strong123';
CREATE CERTIFICATE HOST_W_cert WITH SUBJECT = 'HOST_W certificate for database mirroring', START_DATE = '01/01/2006', EXPIRY_DATE = '12/31/2050';
BACKUP CERTIFICATE HOST_W_cert TO FILE = 'C:HOST_W_cert.cer';
The error message is:
Msg 15240, Level 16, State 1, Line 1
Cannot write into file 'C:HOST_W_cert.cer'. Verify that you have write permissions, that the file path is valid, and that the file does not already exist.
I connect to the database with a domain user what is a local admin on the witness server (my local user), so this couldn't be a permission reason. The file doesn't already exists, so that is not the problem.
What could it be?
Greetings, Torsten
View 3 Replies
View Related
Nov 14, 2000
I have creted a backup device on network drive and getting the following error when I run the backup command as a job.SQL server and the agent are running on a domain account which has full permission on the network drive.Any help is greatly appreciated.
Thanks!
"Cannot open backup device 'mccdiffbkpond2build'.
Device error or device off-line. See the SQL Server error
log for more details. [SQLSTATE 42000] (Error 3201) Backup or
restore operation terminating abnormally. [SQLSTATE 42000]
(Error 3013). The step failed"
View 1 Replies
View Related
Aug 21, 2014
If I try to backup of database in sql 2012 with t-Sql as follows:
Backup database db1
to disk='c:myfullbkup.bak' with init
go
This code works absolutely fine.
But if I try to take backup through SSMS -Task -Backup in object explorer and gave the same path of c: drive or any other folder outside sql default "Backup" folder.It gives error as access denied.This was not the scene in Sql server 2008.
View 8 Replies
View Related
Jul 20, 2005
I am running a SQL Server 2000 installation with several databases. Eachdatabase and log is backed-up using a maintenance plan.The scheduled maintance plan for the latest database does not run, butdisplays no error. There is no entry in the job history. The same thinghappens when I try to run the individual jobs from Enterprise Manager.I've checked the database recovery model (full), the location of the backupfiles (same as the other databases), and just about everything else I canthink of. The scheduled maintenance plan for every other database runs asit should.What am I missing?ThanksIain
View 6 Replies
View Related
Aug 28, 2006
Hello,
I would like to have a script , that sends a mail to the dba mail box when the database backup fails . The mail should be sent to the SMTP server.
I have the script which gives the whole output of the backup status but I would like it to change so that it fires only when a backup fails. Please suggest me what to do..
select
bmf.physical_device_name,
RIGHT(bmf.physical_device_name, CHARINDEX('', REVERSE(bmf.physical_device_name))-1) as physical_device_file,
bs.database_name,
bs.backup_start_date,
bs.backup_finish_date,
bs.type,
bs.first_lsn,
bs.last_lsn,
bs.checkpoint_lsn,
bs.database_backup_lsn
into #backup
from
msdb.dbo.backupset bs,
msdb.dbo.backupmediafamily bmf
where bmf.media_set_id = bs.media_set_id
and bs.backup_finish_date is not null
AND bs.type = 'D'
AND bs.backup_start_date = (select max(backup_start_date) from msdb.dbo.backupset WHERE type = bs.type and database_name = bs.database_name)
order by bs.database_name, bs.backup_start_date asc
select @message = @message + char(13) + Char(13) + 'Backup Status' + Char(13)
DECLARE GetBackup CURSOR FOR
select database_name, backup_finish_date from #backup order by database_name
OPEN GetBackup
FETCH NEXT FROM GetBackup INTO @dbname, @Status
WHILE @@FETCH_STATUS = 0
BEGIN
select @message = @message + @dbname + ' backup up on ' + @Status + Char(13)
FETCH NEXT FROM GetBackup INTO @dbname, @Status
END
Close GetBackup
Deallocate GetBackup
drop table #backup
print @message
EXEC master.dbo.xp_smtp_sendmail
@FROM = N'testsql2000@is.depaul.edu',
@TO = N'dvaddi@depaul.edu',
@server = N'smtp.depaul.edu',
@subject = N'Status of sqlserver!',
@type = N'text/html',
@message = @message
Thanks
View 1 Replies
View Related
Nov 1, 2007
Hi all,
I am using SQL Server 2000 for one of our web application system called eRoom. eRoom uses SQL Server 2000 as a database. Now I have used SQL Server 2000 Database backup features to run the 4 database backup every night at 10pm. The backup runs fine. But recently I have found that for some reason when Our server machine which is hosting eRoom and SQL Server (Windows Server 2003 Standard Edition) is restarted, the database backup does not run anymore.
Now I have checked SQL Server settings and the settings allow SQL Server and SQL Server agent to restart both the services when the operating system starts. But still the database backup does not run when the server machine is restarted. It happened twice last week. Can anyone please help me?
Here are some information to help you understand the problem.
Backup Process Followed:
I went to SQL Server 2000 Enterprise Manager, then went to the appropriate server and then right click the Database>All Tasks> Backup Database> and then selected the backup file which is a (.BAK) file and then scheduled the database to be backed up at 10:00pm every night. I followed the same procedure for all 4 databases.
I am running SQL Server 2000 Standard Edition on Windows Server 2003 Standard Edition R2
Thanks
View 9 Replies
View Related
Nov 6, 2007
Hello,
SQL 2000 backup to C dirve fails with event 17055 Operating system error = 5 access is denied. Creating and running a backup job wizards errors with SQL State 42000, Deveice error or device off line. SQL is running as LocalSystem. The backup destination has every Windows group added with Full Control.
Thanks
View 4 Replies
View Related
Mar 31, 2015
We have a rather large environment and have just a couple of boxes out there that we are getting cannot begin distributed transaction on inserts and updates but works fine on selects. Inserts and updates work fine outside the begin tran / commit so it's definitely DTC
We have checked the configuration on and the source box is set to No authentication required same for destination.
We have: Verified credentials running the service, changed them, same problem. Uninstalled and re-installed MSDTC per Microsoft instructions.
Have run all the tools for checking DTC DTCPing etc and followed those procedures which typically in the past has resolved any DTC issues. Other than swapping out the offending pc for a new one we are at a loss.
View 2 Replies
View Related
Jan 8, 2008
Hi everyone,
I am running SQL 2000 SP3. I have one maintenence plan that is backing up one database and that is working fine. I am trying to create another maintenence plan for another database but the job does not execute and it gives me errors. Both SQL server and the agent uses 'local system account' to run the service. I have tried changing this to a domain account to see if it fixes anything. Also on the jobs, the job owner is a domain account. Below are two erros I am getting when running the jobs.
Error1:
BackupDiskFile::CreateMedia: Backup device 'D:SQL Backups....mybackupfile.bak' failed to create. Operating system error = 3(The system cannot find the path specified.).
Error2:
BACKUP failed to complete the command BACKUP DATABASE [Database_Name] TO DISK = N'D:SQL Backups....mybackupfile.bak' WITH INIT , NOUNLOAD , NOSKIP , STATS = 10, NOFORMAT
Any help would be appreciated.
Thanks.
View 1 Replies
View Related
Jul 19, 2007
We are doing the following steps:-
1. Weekly Full Bckup
2.Daily Differential backup
3.hr Log back up
The following command works fine for all the Backups. it means backup file is fine.
RESTORE FILELISTONLY from DISK = 'D:BackupewDB_ full.BAK'
RESTORE HEADERONLY FROM DISK = 'D:BackupewDB_ ull.BAK'
RESTORE LABELONLY FROM DISK = 'D:BackupewTest_full.BAK'
RESTORE VERIFYONLY FROM DISK = 'D:BackupewTest_full.BAK'
Also The full back up restoration works fine:
RESTORE DATABASE Test3 FROM DISK = 'D:BackupewTest_full.BAK'
WITH MOVE 'Test2_Data' TO 'F:MSSQL2KMSSQLdataTest2Net_Data.MDF',
MOVE 'Test2_Log' TO 'F:MSSQL2KMSSQLdataTest2Net_Log.LDF',
NORECOVERY
GO
/* RESULT :
Processed 1032 pages for database 'Test3', file 'test2_Data' on file 1.
Processed 1 pages for database 'Test3', file 'test2_Log' on file 1.
RESTORE DATABASE successfully processed 1033 pages in 1.907 seconds (4.433 MB/sec).
*/
But While restoring the Differential file it throws error:
RESTORE DATABASE Test3 from DISK = 'D:Backupew est2_Diff1.bak'
WITH NORECOVERY
GO
Msg 3136, Level 16, State 0, Line 1
Cannot apply the backup on device 'D:Backupew est2_Diff1.bak' to database 'Test3'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
I checked the SQL Server Log no error msg corresponding Differential backup restore.
I don't know how to proceed further.Can any one guide me how to over come this..
Thanks !
View 2 Replies
View Related
May 29, 2007
I have a maintenance plan step to perform transaction log backups. There are a few databases that are offline. The backup seems to fail because it tries to backup the offline databases. The backup step is by itself as one of three subplans, although it also fails when it is the only step in a plan with only one subplan.
I have another server that is only on SP1 and it does not have problems handling the offline databases.
Is this an issue with SP2(9.0.3054)?
View 4 Replies
View Related
Dec 3, 2001
The database is SQL Server 2000. Recover Plan = 'Simple'. Maintenance Plan always fails when DBCC tries to put database in single-user mode so it can do the backup, if there is a user has a connection to it from EssBase. No queries running - just a connection. How can I get SQL Server to automatically kill the connections so it can do the backup?
View 2 Replies
View Related
