SQL Transfer
Feb 4, 1999
Hi Everybody...
I have recently tried to transfer my database over from one machine to another, but failed to do so because it gets jammed on 30%. I am just wondering if there is any other ways I can take to migrate the database over.
I am currently running sql server 6.5 in concurrent with iis 4 and nt4. I am trying to seperate the iis to a new server machine and sql server to another server.
Please advise me which route to take if you have any suggestions and your solution is important to me. Thanks!
-Ken
View 1 Replies
ADVERTISEMENT
Oct 22, 1998
I am using transfer manager in SQL 6.5 to copy a database and
all objects with data to another server. Transfer manager is not recreating all stored procedures. This even happens when I used it to another database on the same server. Any ideas??
View 3 Replies
View Related
May 30, 2008
Is it possible/advisable when transfering very large amounts of data from server to server to:
trasnfer the data to a new table first
second alter new table adding indexes, defaults, ets based on original table
if it is what flow item would be used to transfer/alter the indexes and defaults?
I'm very new to ssis so the more detail you can give the better.
Thanks
View 5 Replies
View Related
Feb 16, 1999
Hello:
I have been trying to run transfer manager to transfer all of the data
from the production database on one server to a test database on another
server(to refresh it). In order to make sure it runs on the server, I have
been scheduling it under EM to do so and I am pointing to the log on the
destination server on the EM Transfer panel.
For some reason, I am getting the following message in the destination
server error log:
99/02/16 10:24:41.42 ods Error : 17824, Severity: 10, State: 0
99/02/16 10:24:41.42 ods Unable to write to ListenOn connection
'.pipesqlquery', loginname 'sa', hostname 'TEMP09'.
99/02/16 10:24:41.42 ods OS Error : 232, The pipe is being closed.
99/02/16 10:24:41.42 spid17 Error : 1608, Severity: 21, State: 2
99/02/16 10:24:41.42 spid17 A network error was encountered while sending
results to the front end. Check the SQL Server errorlog for more
information.
I checked the event viewer error log and see no messages for today.
Can any one advise me what I need to do for this to run successfully?
Thanks. Any information furnished will be greatly appreciated.
David Spaisman
View 1 Replies
View Related
Mar 19, 2014
In the full recovery model, if i run a transaction that inserts 10MB of data into a table, then 10 MB of data is moved in the data file. Does this mean then that the log file will grow by exactly 10MB as well?
I understand that all transactions are logged to the log file to enable rollback and point in time recovery, but what is actually physically stored in the log file for this transactions record? Is it the text of the command from the transaction or the actual physical data from that transaction?
I ask because say if I have two drives, one with 5MB/s write speed for the log file and one with 10MB/s write speed for the data file, if I start trying to insert 10 MB of data per second into the table, am I going to be limited to 5MB/s by the log file drive, or is SQL server not going to try and log all 10 MB each second to the log file?
View 6 Replies
View Related
Mar 1, 2007
Hi,
I have the following method which transfers data SQL to SQL on the same server but when I try to change the destination server it won't transfer the data. The method runs through as expected with no exceptions or errors but with no data transfered.
Private Sub TransferSQLData(ByVal SourceDetails As Admin_upload.EnvironmentDetails, ByVal DestinationDetails As Admin_upload.EnvironmentDetails)
'Transfer database from source to destination.
Dim oPackage As New DTS.Package2
Dim oConnection As DTS.Connection2
Dim oStep As DTS.Step2
Dim oTask As DTS.Task
Dim oCustomTask As DTS.TransferObjectsTask2
Try
oStep = oPackage.Steps.New
oTask = oPackage.Tasks.New("DTSTransferObjectsTask")
oCustomTask = oTask.CustomTask
oPackage.FailOnError = False
With oStep
.Name = "Copy Database design and data"
.ExecuteInMainThread = True
End With
With oTask
.Name = "GenericPkgTask"
End With
With oCustomTask
.Name = "DTSTransferObjectsTask"
.SourceServer = "MYSERVER"
.SourceUseTrustedConnection = True
.SourceDatabase = SourceDetails.MetaDB
.SourceLogin = SourceDetails.MetaUser
.SourcePassword = SourceDetails.MetaPWD
.DestinationServer = "MYSERVER"
.DestinationUseTrustedConnection = True
.DestinationDatabase = DestinationDetails.MetaDB
.DestinationLogin = DestinationDetails.MetaUser
.DestinationPassword = DestinationDetails.MetaPWD
.CopyAllObjects = True
.IncludeDependencies = False
.IncludeLogins = False
.IncludeUsers = False
.DropDestinationObjectsFirst = True
.CopySchema = True
.CopyData = DTS.DTSTransfer_CopyDataOption.DTSTransfer_ReplaceData
End With
oStep.TaskName = oCustomTask.Name
oPackage.Steps.Add(oStep)
oPackage.Tasks.Add(oTask)
oPackage.Execute()
Catch ex As Exception
LabelUploadMeta.Text = "Failed to Upload MetaData: " & ex.Message
Throw ex
Finally
oConnection = Nothing
oCustomTask = Nothing
oTask = Nothing
oStep = Nothing
If Not (oPackage Is Nothing) Then
oPackage.UnInitialize()
End If
End Try
End Sub
This works fine but when I set the following within the method:
.DestinationServer = "ANOTHERSERVER"
It won't transfer the data.
I can access the remote server and read and write data to it.
Any ideas?
View 1 Replies
View Related
Jun 16, 2000
Hi ,
Can anyone suggest me to transfer a database from 65 to 70.
I trasfer a database using DTS, but i am only getting data. I need my users , views, stored procedures, permissions.
I need to upgrade three databases from 65 to another 70 server.
i also generated a script from 65, but which is showing errors.
Could u pls give any suggestions.
thank u.
--Raj
View 1 Replies
View Related
Oct 8, 1999
I recently transferred a db from our production machine to a test machine. After the transfer was complete I realized that all copied logins were copied with blank passwords. Is this default behavior? Can I set the transfer to include passwords?
Dave King
View 3 Replies
View Related
Sep 13, 2005
Hi,
stupid question but i have forgotten how to transfer a DTS package between servers, its been so long since i last had to!!!
TIA
View 1 Replies
View Related
Oct 19, 2007
Hi,
I want to transfer rows from one database to another.
Source My Source tables in database 'Staging'
CustomersEng
Name
Age
StCode
CityCode
InternalID
CustomersSpanish
Name
Age
StCode
CityCode
InternalID
CustomersEng and CustomersSpanish contains a replica..only difference being that 'Name' in the CustomerSpanish table is written in spanish language. The Stcode, citycode and Internalid together makes the row unique.
Code BlockSample script
Create table #CustomersEng (name nvarchar(20),age int, st_code int,
citycode int, internalid int)
Insert into #CustomersEng values('Aron',23,1,1,12);
Insert into #CustomersEng values('Cathy',28,1,1,13);
Insert into #CustomersEng values('Zarog',33,1,1,14);
Insert into #CustomersEng values('Michale',25,1,2,12);
Insert into #CustomersEng values('Linda',43,1,2,13);
Insert into #CustomersEng values('Burt',53,1,2,14);
Create table #CustomersSpanish (name nvarchar(20),age int, st_code int,
citycode int, internalid int)
Insert into #CustomersSpanish values('Arona',23,1,1,12);
Insert into #CustomersSpanish values('Cathylo',28,1,1,13);
Insert into #CustomersSpanish values('Zarogo',33,1,1,14);
Insert into #CustomersSpanish values('Michalo',25,1,2,12);
Insert into #CustomersSpanish values('Lindalo',43,1,2,13);
Insert into #CustomersSpanish values('Burto',53,1,2,14);
---------------------------------------------------------------------------------------------------------------
Destination tables in database 'CMO'
CustomerMaster
CustomerId (identity) (pk)
StCode
CityCode
InternalID
CustomerDetails [customerid and languagecode together are primary keys]
CustomerId (fk)
Name
Age
languagecode
Language
languagecode (pk)
languagename
Code Block
Create table #CustomerMaster (customerid int identity(1,1), st_code int,
citycode int, internalid int)
Create table #CustomerDetails (customerid int,name nvarchar(20),age int,
languagecode int)
Create table #CustLanguage (languagecode int, languagename varchar(10))
Insert into #CustLanguage VALUES (1,'English')
Insert into #CustLanguage VALUES (2,'Spanish')
Code BlockEXPECTED OUTPUT
CustomerMaster
1 1 1 12
2 1 1 13
3 1 1 14
4 1 2 12
5 1 2 13
6 1 2 14
CustomerDetails
1 Aron 23 1
1 Arona 23 2
2 Cathy 28 1
2 Cathylo 28 2
3 Zarog 33 1
3 Zarogo 33 2
4 Michale 25 1
4 Michalo 25 2
5 Linda 43 1
5 Lindalo 43 2
6 Burt 53 1
6 Burto 53 2
How can i write t-sql for this?
thanks
View 4 Replies
View Related
Feb 23, 2007
Hi All;
I know that in the SQL Server, the logins are not contained in the database (thanks to Kevin Yu) but I don't know where are they stored. For example if I want to transfer to another server I'll have to backup users too; but HOW?
In order to be more clear: When I simply take a backup from my server and restore it to my computer I can not login again with the user login information which is created on the server; However even if I make some changes; after backing the DB up from my computer and restoring to the server the logins are working (with re-mapping)
Thanks...
View 7 Replies
View Related
Mar 26, 2007
I had Sql Server 2005 installed on my machine, with that I am working on Visual Studio 2005. I just need to add an existing database into the app_data folder. The database is existing in the Sql server, it contains 180 tables so I cannot manually copy that tables in the app_data folder. for that is there any another way to copy all the tables into the database into the folder app_data with the data in the table.
Thanks & Regards
Girish Nehte
View 4 Replies
View Related
Apr 16, 2004
I recently transferred my SQL DB from one server to another, I backed the DB up, copied across and restored it into the new location, the problem is that I get the following error.
System.Data.SqlClient.SqlException: Invalid object name 'Table Name'
I have created a new user for this database and changed my code accordingly.
<%@ Import Namespace="System.Data.SqlClient" %>
<%@ Page Language="VB" Debug="true" %>
<Script Runat="Server">
Sub Page_Load
Dim conPubs As SqlConnection
Dim cmdSelectContacts As SqlCommand
Dim dtrContacts As SqlDataReader
conPubs = New SqlConnection("Server=Treebeard;UID=Intranet;Pwd=glglgl;Database=Contacts")
ConPubs.Open()
cmdSelectContacts = New SqlCommand ("Select * From Clientdata", ConPubs)
dtrContacts = cmdSelectContacts.ExecuteReader()
While dtrContacts.Read()
Response.Write( "<li>" )
Response.Write( dtrContacts( "c_forename" ))
End While
dtrContacts.Close
conPubs.Close()
End Sub
</script>
Any Ideas?
View 4 Replies
View Related
Aug 22, 2005
Hi everyone,I need some help transfering my database(SQL2005) to the host's server.In SQL 2000 I had the Management tools > DTS or ImportExport tools.SQL2005 lacks this, all I've got is Express Manager > can't connect to multiple databases.Can connect to one database and has a screen to excute TSQL commands.I don't want to have to recreate the whole database on the server.....This would be crazy... 150 stored procedures and 30 tables. Not to mention all the individual settings for each column.I know there is SQL Studio Management tools for the full version of SQL 2005. Anyone got any idea's ?Any input/suggestions is greatly appreciated.Thanks,JShep
View 1 Replies
View Related
Jan 16, 2006
I am trying to transfer my database from my computer where built it to another computer. I have microsoft SQL server 2005 CTP on my computer and the other computer has Microsoft SQL server.
Does anyone have any suggestions on how to do this??? I cannot find much info on SQL server 2005 CTP. I have found some info about the copy database wizzard, but I cannot find that in CTP.
Please any ideas or info would be wonderful
Thanks
Sarah
View 6 Replies
View Related
Mar 1, 2002
If I’m using the DTS Transfer SQL Object to move all objects and data from one server to another server and I make a schema change to source server, why is the dts package failing the next time I run it? Do I have to do some sort of refresh?
Any help!
View 1 Replies
View Related
May 11, 2001
I have a corrupt master db due to a rogue script that inserted lots of information into it. I have two SQL servers, and I could use some advice on the best way to copy the files over to the second server, then back after a reload of the first server. My main concern is the DTS packages I have built- I can't afford to lose those.
View 4 Replies
View Related
Jul 26, 2000
Hi,
I am in the process of upgrading database in sql server 6.5 to 7.0.
For that i am following one computer upgrade.
For creating dev environment in my computer i am using Transfer/Objects in 6.5
for transferring database from remote(production) computer to my computer.
Do i need only to transfer Userdatabase alone or do i need to Transfer Master and other ?
Or Is it better to restore dump ?
Thanks
View 4 Replies
View Related
Jul 12, 2000
HI,
If i transfer logins from one server to another server using dts, I am getting all the logins and permissions... How will i get passwords too..
-thank u.
--Siva
View 2 Replies
View Related
Sep 18, 2000
Does anyone have a sample SQL DMO script to transfer SQL Server logins from one server to another including the passwords ? any pointers will be greatly appreciated
View 1 Replies
View Related
Jul 30, 2000
Hello. Firstly apologies for what might appear as a basic question, but being a newbie and all :-). .
I have a SQL 7 DB, loads of sp, vw, tables etc. I want to copy this DB to another server so that all the DB and sp permissions stay current, all the sql logins come across etc etc.
I have tried restoring a backup to the new server (which worked fine), but then I appear to have lost the permissions for the tables and sp's.
I have then tried taking a copy of the original SQL master table and restoring this to the new server - but no luck.
Can anyone advise a sure method of copying an entire table and related entries (meaning sql logins etc) to a new server.
Appreciate any comments.
Regards
View 3 Replies
View Related
Aug 3, 2000
can any body can tell how data trnsfer from oracle database to sql server database. what is the methods i can use? is it required to write scripts.
if scripts required, can anybody can give me sample scipt.
View 1 Replies
View Related
Apr 6, 2000
Does anyone know whats the best to transfer sqlserver to new server but maintain the same Sqlserver name. The reason for this is that we have thousands of users out in the field and it would be too much trouble to identify these users and update the odbc entry to point to new sqlserver.
Thanks in advance for all your help.
View 1 Replies
View Related
Nov 10, 2000
When i try to load tables from DB2 OS390 Via DTS and DB2 ODBC it
give me an error with the timestamp field. Its (DTS) says the timestamp
field on SQL is marked read only.
Is there anyway around this problem?
View 1 Replies
View Related
Nov 16, 2000
SQL v7.0 - DTS
Tying to transfer all object info, sp's, constraints and data in to a fresh new database in the same instance, but it's hit and miss when it comes to getting everything transferred. Followed step by step instructions (GUI/Scripts) and sometimes the table structure will transfer without PK's, as well as some data and if you're lucky, some constraints. Stored proc's have a tendency to show up 20 minutes later. I'm testing this on a machine with IE 5, SP2 and fresh new Dll's (just in case something was corrupted). Is there a priority as far as what to transfer first? For example, tables only 1st, then constraints on down to records parent to child? I am assumming you should be able to transfer all at the same time since it's built in to the utility. Or, does it come down to something in the schema? If anyone out there has experienced something similar and found a solution, please advise.
View 1 Replies
View Related
Jan 3, 2000
Does anyone know why you get an error while trying to transfer a database with the DTS?
Thanks in advance
Dennis
View 4 Replies
View Related
Jun 14, 2000
hi,
I am having two servers one is 6.5 and another is 7.0.
I would like to export a one database from 6.5 to 7.0.
when i was trying to transfer the data it is saying u have to upgrade the server of 6.5.
pls tell me how i have to transfer data from 65 to 7.0
without bcp.
--raj
View 2 Replies
View Related
Nov 15, 1999
I would like to know how I can transfer all Login and password and access records from one SQL Server to another, without transferring the databases. I know I can do this via DTS, but I can not figure out the right combination for bringing over the login names. passwords, and roles, with out transferring the databases. The databases have been transfered already via a backup and restore process. Now I need all of the login infomation from the old server to come across. In DTS I go through the Wizard saying to transfer the Master Database from one server to the other, and transfer objects and Data between SQL Server databases. Under the selcet options to transfer page, I uncheck the "Use Default Options" , and on the options page I select all of the "Security options" and deselect all of the "Table options" (Indexes, triggers, keys, etc). The process runs for a short time before bombing out with a failure. I can not find a log file under the Log folder to tell me where it has failed. Can anyone one lend me a hand with this?
TIA
Ken Merrigan
View 2 Replies
View Related
Nov 15, 1999
Hi,
here we have 5 servers,application server,datawarehousing server,web server,QA server and production server. so i suppose to transfer(by using DTS) the total data(GDWReports) from production server to QA server. so actually i exported that data from production server to one destination by using export wizard and i tried for import that data to qa server by using VB script.but i got one error that "login failed like that". so how to import the data. pl give the suggestions asap.
thanx
Janreddy
View 1 Replies
View Related
Oct 22, 1999
New Member to group
I'm having trouble with what must be a common task as people migrate to 7.0. From the info I've read (MSDN, Books Online, etc) you cannot use the 7.0 Transfer GUI to access SQL Server 6.0, so I used a SQL 6.5 box to bring the old 6.0 DB half way.( all objects transfer well ).
However, I lose many types of objects whenever I attempt the 6.5 to 7.0 move.(views, contraints, rules, identity columns and seeds, etc.).
Does 7.0 require an ole connection to get these objects ? I believe it only gets an ODBC connection. Is there a required upgrade to the 6.5 box before the transfer? I have not found any articles mentioning this.
ps This is a 6.0->6.5->7.0 transfer, not using the upgrade wizard.
View 2 Replies
View Related
Jan 19, 2001
I am currently in the process of transfering data from an existing SQL 6.5 server to new box. Both boxes have SQL 6.5 with SP4. I having a problem with a paticular database transfer. The Database/Object transfer utility starts and then about 20% in it says that it is complete. The transfer creates all the objects in the new server but does not transfer the data. I have manually transferred the data but I am curious if anyone else has had this problem or if this is a known bug. Just curious. Thanks
View 2 Replies
View Related
Oct 20, 2000
I have a database that I tried to shrink with no luck and have read to use the transfer Manager to transfer the data to a smaller database. Is this possible
to do?? Right now the database size is 31.5 Gig though the backups are only 14 Gig. I want to set the
database to about 20 gig.
Can anyone help me??
View 1 Replies
View Related
Nov 24, 1999
I'm trying to transfer a table from a sql 7 server to an sql 6.5 server. When I try to select OLE db as the destination it gives me an error saying I can't do OLE DB unless I have sql 7.... So I chose ODBC
When it tries to transfer the table I get this error:
QUERY BASED INSERTION OR UPDATING OF BLOB VALUES CAN NOT BE SUPPORTED
what the hell? Is this due to the transfer from 7 to 6.5? How do I get around this?
-----
What I'm trying to do is change the datatype of a table in this 6.5 database from smallint to integer... (I wasn't the idiot that designed this database with a smallint primary key) There is not enough room to copy the table into a new table, and when I ran through the above process it dropped the table and I can't restore it because I'm not the admin. Is there a way of changing the primary key datatype without using up a large amount of database space? or can I do a transfer from 7-6.5 some how?
This is a nightmare... I wish my client would just upgrade to 7 then this would have taken 5 seconds instead of all day long
View 1 Replies
View Related
