SQL XML :: Adding Node To XML Field If Not Exist To Validate With Schema

Jun 17, 2015

I have following data in my table. In some of the elements there can be missing nodes. I need to find out missing nodes from each element and insert default node if it doesnt exist so it validates with schena.from below exmaple in the third element location node is missing and i would like to add default node if we see any of these.

Input
CREATE
TABLE #t (xmlfile
XML)
INSERT 
INTO #t
       
[code]....

Some times Location tag name can be Location10. like <Location10>NY</Location10>.In this case i need to update <Location10> to <Location> to validate with XML schema.

View 2 Replies


ADVERTISEMENT

Do I Need To Install SQL Server To Second Node In Cluster Prior To Adding The Node?

Jun 12, 2007

I read these instructions:

http://msdn2.microsoft.com/en-us/library/ms191545(SQL.90).aspx



But I'm not sure if I have to install SQL Server first on node 2, then add it to the cluster. Or does adding it to the cluster also install the software?



Thanks

View 1 Replies View Related

Task Failed To Validate No Schema To Use In Validation Was Found..

Aug 20, 2006

I have a package with an XML Task with OperationType = Validate. The source is a string variable and the second operand is a file connection to a schema file. The schema file <include>'s other schemas. I run the package in debug mode in Visual Studio with no errors. I exit Visual Studio. Then I open Visual Studio again and run the package in debug mode like before and it fails in the xml task with error: "Task failed to validate "No schema to use in validation was found.". I don't understand why it fails since no changes were made. The strange thing is that if I click the File Connection Manager for the schema file and click Browse and then reselect the same schema file again then it runs OK. Note that I have to exit Visual Studio and not just close the package in order to repro the error. It seems like exiting Visual Studio frees some resource that is essential to the validation. Reselecting the schema file in the Connection Manager seems to restore the resource. (SP1)

View 2 Replies View Related

Text, Ntext, Or Image Node Does Not Exist Error

Apr 17, 2006

Hai Friends...

I am using sql server 2000. i have one table with columns

empid notnull
empfname not null
empmname null
emplname not null

while i am writing a simple procedure to get the employee middel name(empmname) it is giving the error message like this


Server: Msg 7105, Level 22, State 6, Procedure emp_statistics, Line 11
Page (1:70), slot 18 for text, ntext, or image node does not exist.

Connection Broken



plase help me Urgent

Thanks and Regards

Krishna Mangamuri

View 8 Replies View Related

Adding A XML Schema To XML Schema Collection

Apr 19, 2006

I used SSEUtil to add a schema to my database but I am having problems.  Used these steps:SSEUtil -c> USE "c:Rich.mdf"> GO>!RUN Resume.SQL//indicates success>SELECT * FROM SYS.XML_SCHEMA_COLLECTIONS>GO//schema not shown in list> USE master>GO>SELECT * FROM SYS.XML_SCHEMA_COLLECTIONS>GO//schema is shown in the queryIt appears that the schema is not added to the desired database, so when I try to use the schema in Visual Studio, the schema does not appear when I connect to the Rich.mdf database.  Any ideas on what I am doing wrong or why this might be happening?ThanksKevin

View 3 Replies View Related

Page (1:404399), Slot 5 For Text, Ntext, Or Image Node Does Not Exist.

Apr 7, 2008

I wonder if anyone can help.

I do not understand the error message but I do know it is associated with a specific table and one of its indexes. If I try to drop the index that is the error message I get.

I have copied the data from the table to a new table and rebuilt the indexes on the new table and everything is working fine.

The bad table is now renamed to myTable_BAD. I now want to delete it but can't as everytime I enter
drop table myTable_BAD

I get Page (1:404399), slot 5 for text, ntext, or image node does not exist.

So here is my question

How can I delete this Bad table?

View 9 Replies View Related

SQL2005 And Adding A New Node

Apr 8, 2008

I currently have a single node cluster of SQL2K5 installed on Windows 2003 Server. A second node has been purchased and ready to install but I need to know what needs to be done to configure it to be the failover for SQL.

Is it just a basic install that needs to be done on the second node or do I need to re-install the SQL Services on the first node to have it properly recognize the second node?

Thank you,

Ryan

View 5 Replies View Related

Transact SQL :: Validate Each Field Of Every Row In Table Then Send Email

Aug 5, 2015

I have some records (approx 100K - 500K) in my table (Name, DOB, Zip, Phone). I want to validate each record and every field as given below.

Name - Should not have numerics
DOB - Should be in yyyy-mm-dd format, should be < 1995
Zip - Should be 5 char zip, allowed 3 or 4 char zip for some States
Phone - Should have 10 numeric digits, should be in xxxx-xxxx-xx format.

After validating these rules, If the record is valid then send email saying valid record, if invalid then send email with validation failure details like which column failed which validation rule suppose DOB might not be in specified format or it might be > 2000 all these details.

How to validate all the records in bulk without any loop or cursor.

View 10 Replies View Related

Adding Second Node To SQL 2005 Cluster

Feb 20, 2008

I've installed MSCS on two Win2k3 x64 Enterprise systems. On the first I installed SQL 2005, and all went well. All resources are online and SQL works, migrated 25 databases into the new install. Installing SQL 2005 on the second node is problematic. If I select install cluster resources, I have to define new stuff for a new group. If I don't install cluster resources, then the install is all local (nothing on the unseen shared disk resource.)

It does not see the shared disk resource during install, the Quorum is good. I can move the Cluster Group between servers with no problems. None of the SQL resources is available on the second node. Error is basically "a cluster node is not available for this operation".


The Sql Server and Sql Server Agent do not even acknowledge the existence of the second node, and it is not available as a possible owner. i can't find any specific instructions on installing the second node. The other SQL resources say the second server is an available possible owner. None of them will take ownership and run the resource.

Any help available out there?
Thanks!
Bill

View 1 Replies View Related

Adding New Node In SQL Server 2000 Cluster

Jun 24, 2008

Friends -

Currently we are using SQL Server 2000 Cluster (Active/Active) on windows 2000 advance server.

This cluster contains two nodes.

Is it possible to add another two nodes on the existing cluster, please provide me steps or any link.

Appreciate your support

Cheers:)
satish

View 1 Replies View Related

The Default Schema Does Not Exist.

Mar 31, 2006

During deployment of my database project I receive the following error:

"The default schema does not exist."

What could be causing this error?

View 1 Replies View Related

SQL 2012 :: Specify Server Installation Location When Adding Second Node To Cluster

Jun 6, 2014

When adding a node to a SQL Server 2012 Standard edition cluster, how I do I identify the location for SQL server shared components and the rest of the SQL Server installation binaries?

When adding a node to a SQL Server 2012 Standard edition cluster all the binaries went to the C: drive default location. We put those files on a different drive when installing the first node. What needs to be done so both nodes have the binaries on the same drives and folders?

View 3 Replies View Related

Adding Integration Services Node In Server Management Studio

Jun 15, 2005

Hi,

View 8 Replies View Related

SQL 2012 :: Symmetrically Encrypt A Single Node In XML Field

Apr 30, 2014

How do I reliably symmetrically encrypt a single node in an XML field in my SQL Server 2012 database? I know I cannot use SQL Server encryption to encrypt an XML field and I have been getting unpredictable results with a home grown solution.

View 9 Replies View Related

How To Refresh Linq-To-SQL Classes After Schema Changes Without Dropping And Adding

May 28, 2008

All --
Please help. 
I need to know how to refresh Linq-To-SQL classes after schema changes without dropping and adding them.
Now, when I make a schema change (such as add or delete a column to a table), I want to "refresh" the Context.dbml file.
The only way that seems to work is to drop the table from the Context.dbml designer and then add it back in.
Is there a better way to do this?
How are others doing this?
Please advise.
Thank you.
-- Mark Kamoski

View 5 Replies View Related

Adding A New Field To A Table With Image Field

Aug 24, 2006

Hi,
I have a concern about adding a new field to a table with image field - which is huge.
Will there be a problem with some databases, where they have a hard time locating data correctly after such a large field?
Previously this happened to me, and what was advised to put all the big fields at the end of the table.
Thanks.
 

View 1 Replies View Related

Adding In A Whole Dataset Into A Table - Instead Of Field By Field

Feb 29, 2008



does anyone know if there is a way, or perhaps a custom toolbox control that is already developed that allows you to drag an entire dataset into a table, instead of pulling everything in field by field...?

was just curious.

-dk

View 3 Replies View Related

Analysis :: Adding Or Updating New Schema Updates Into DB With Regards To SSAS Project?

Jul 22, 2015

I seem to having a really hard time when making schema changes.  Adding a new fact table, renaming a dimension column, adding a new measure or renaming an existing one. Somehow these things tend to cause problems at one or more stages - either running the schema wizard or processing the cube.So I ask, what is your overall strategy for adding or updating new schema updates into your DB with regards to the SSAS project?

Another way to ask this - is how often do you find yourself deleting the the DSV and / or the whole cube and starting over because some schema change lead to a cascade of issues that just didnt seem to want to let you correct them?

View 2 Replies View Related

Setup And Upgrade :: Cluster Installation Failed On Adding Node To Cluster

Oct 10, 2015

During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .
 
1<sup>st</sup> Method…

1. Open console command (Run->CMD with administrator privileges). 

2. net stop winmgmt 

3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository). 

4. net start winmgmt

2<sup>nd</sup> Method..

1. Disable and stop the WMI service.

a) Command : - sc config winmgmt start= disabled

b. Command : -                 net stop winmgmt

2. Run the following commands.

a).  Command:  Winmgmt /salvagerepository %windir%System32wbem

b). Command:   Winmgmt /resetrepository %windir%System32wbem

3. Re-enable the WMI service

Command:          sc config winmgmt start= auto 

Last command to run after above steps

4. Command:     mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"

File not found Error for above command.

View 3 Replies View Related

About Field Not Exist In Database

Mar 6, 2008

alo people..
so..this is my question regarding to gridview.. is possible to put the field inside the gridview if it is not exist in the database..
example here is the database:
Name      salaryADAM       30 BOY          50
so right now i want to check their yearly salary..so mysql command will look like thisSELECT NAME,SALARY,SALARY*12 AS YEARLY_SALARYFROM TABLE1;
right now the result of the query will look like thisName      Salary    yearly_salaryADAM      30           360BOY        50           600my question again is, is it possible to put the yearly_salary inside the gridview since it is not originally from the table 1?
ps;/ i;m using vb.net(asp.net) and mysql..and also i use the sqldatasource..  
thanx everyone for the help...

View 3 Replies View Related

SQL 2012 :: Log Shipping - Reboot Secondary Node And Then Primary Node

Apr 20, 2015

I have not used log shipping before and find myself in a position where I need to reboot the secondary node and then the primary node and I don't actually need to failover.

Is there anything I need to be aware of. When rebooting the secondary node I assume the transactions will be held in the primary nodes log till the secondary comes back and just carry on once back up?

When rebooting the primary node nothing needs to be done and the log shipping will just start again once it has come back?

View 3 Replies View Related

Show Field Names/Schema

Jan 15, 2004

I can't seem to find a sample code, either here or on the net - - so I'll go ahead and ask...

What I'm looking for is a sample of how to query a database, so that I can populate a listbox with the table names from a database - - and then, populate another listobx with the field names from the database, in order to build a user-driven sql statement builder....

either of the above (at least the field name part) - either a code sample, or a link, will be greatly appreciated) - -

Thanks

View 1 Replies View Related

Dynamic Field DB Schema Brainstorming

Sep 6, 2005

Hello - Have a project where we are going to build a form creation application.  (ASP.NET).  This will allow an administrator to build a form on the fly - this form will appear on the front end of the site.This is a fairly common thing.  Are there any resources out there as to where to start designing the DB schema?  I'm not looking to reinvent the wheel.  Here's the basic objects I'm seeing:TablesFormsFormFieldNamesFormFieldTypesFormFieldJSAny tips on the right direction to go?ThanksRob

View 4 Replies View Related

Transact SQL :: How To Get All Distinct Values From 10 Different Tables That Exist In The Field

Aug 19, 2015

I need to get all distinct values from 10 different tables that exist in the field [favoritesport]  And each table holds close to 50K records so I am looking at 500,000 records to get distinct values for.  Would the fastest, less intrusive way of achieving this be to just create a UNION ALL so run 

Select Distinct([favoritesport]) from table1
Union
Select Distinct([favoritesport]) from table2
Union
Select Distinct([favoritesport]) from table3
etc etc etc

View 2 Replies View Related

SQL 2012 :: Running 2 Distinct AGs On Each Node Of A Two Node Cluster?

Oct 23, 2014

I'm contemplating running two availability groups on a two node WSFC. The WSFC is setup with a file share witness (i.e. no shared storage). Can I safely run 1 AG on one primary node, and the other AG on the other node (as primary). Each AG would have replicas on the passive node. This would effectively allow both servers to be in use at the same time. In a failover event, I understand that both workloads would transfer to a single server - so the box needs to be sized appropriately.

View 1 Replies View Related

SQL 2012 :: 3 Node Cluster Runs With 2 Node Failures?

Jun 11, 2015

We are in the process of building a 3 node SQL Server Cluster (Server 2012/ SQL Server 2012), and we have configured the quorum so that all 3 nodes have a vote (no file share witness as we already have an odd number of nodes).

As I understand it, this should allow the cluster to run as long as 2 of the nodes remain online.

However, the validation report states that 2 node failures would be acceptable and, when we tested this by powering off two of the nodes, the cluster did indeed continue to run on a single node.

View 4 Replies View Related

Transfering Cluster Resources From One Node To Another Node

Aug 21, 2007



I configure Windows 2003 R2 and SQL 2005 two nodes Cluster. When I move cluster resource from one node to anther node it takes around 30 seconds to become online. So in that time if any query is running it stops responding.



So please suggest in this regard

View 2 Replies View Related

Adding A Field In SQL

Apr 18, 2006

I need to add a field to a query which i have created in SQL Server, i have done this in Access no problem and it works fine but when icopy the SQL code from Access to SQL it just falls over. This is my code in Access...

SELECT AIMPDTA_CDADDR.CDCUST, AIMPDTA_CDADDR.CDADDC, AIMPDTA_CDADDR.CDNAME, AIMPDTA_CDADDR.CDADD1, AIMPDTA_CDADDR.CDADD2, AIMPDTA_CDADDR.CDADD3, [CDCUST] & [CDADDC] AS Expr1
FROM AIMPDTA_CDADDR LEFT JOIN AIMPDTA_ASAREA ON AIMPDTA_CDADDR.CDNAME = AIMPDTA_ASAREA.ASNAME
WHERE (((AIMPDTA_CDADDR.CDADDC)<>" "));

Any suggestions would be much appreciated.

Thanks

View 2 Replies View Related

Adding A New Field To A View!!!

Aug 30, 2000

I am trying to add a field on a view which should be query-able.
Please what is the best way to go about it. HELP PLEASE!!!

View 1 Replies View Related

Adding A Field To An Accesstable Using Sql

Mar 19, 2003

Hi,

I have this problem: I'm creating a weblinked database using Access and ASP. The problem is that the fields in the table won't be always the same. E.g. sometimes there will be need for an extra field, but after a while it may not be necessary anymore. Users should be able to add a field to the table (and if possible delete one later on)

I don't whether it is possible to use sql to add a field to an accessdbase. Or is there another way to solve this problem?

thanks for your reply,
yours sincerely,
Dimitri De Vos

View 2 Replies View Related

Adding A Field And Inserting A Value Into It.

Apr 24, 2002

how do i add a new field and insert a value into it?

I'm importing data from another table into a new one, but my source table has a char field and the target filed is (int) can I add a new field to the source file and add a value to it? and how?
I have in my source table a field call companyName that contains text and the target table has a companyId which is an INT.
If I create a field call companyId and add a value of '1' depending on the value of CompanyName...
This is what i want ot do
if CompanyName = LA then insert 1 into new filed companyID
How can I do that? I have to do this for 100 or more tables. Can I write a script that will do that for me?
does it make sence?

View 2 Replies View Related

Adding A Field In A Trigger

May 30, 2008

Have a table with the following data.

Table1
Ord_no inv_no amt Account freefield3
25 125 100.00 1444
25 125 10.00 3555 Rebate
25 125 10.00 3555 Rebate

After the records are inserted I need to add the amt's where freefield3 equals rebate then subtract that sum from the amt where account = 1444. So my final result would be to have 80.00 in the amt field where account equals 1444

View 4 Replies View Related

Adding A Word To Existing Value Of A Field

Sep 17, 2007

Hi!
I want to add a word to a value if the value already exists in that field. How to do this? Please help me. In detail, i have 'id', 'name' and 'info' three columns in one Data Table. When I inserted one value to id field, if the value already exists it should add a word to that value and it should get inserted. Please help me to do this?
Thanks in advance!

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved