SQL Default Instance Fail To Start
Nov 13, 2007
Hi,
I am new to this forum and new to SQL, hope someone can help me. TIA
I have SQL 2000 running on the windows 2000 server. The program reside on the E drive and the data reside on the D drive, my system files drive C got corrupted and gave me the blue screen of death, so I had to reload it from back up, but in doing so, my SQL "Local" default instance fail to load after I got the server back up and running. My other instances are running fine except for the Local. Is their a way to bring that back? or do I have to reload SQL default instance ?
Thanks
View 5 Replies
ADVERTISEMENT
Feb 19, 2007
Hi, I have a task in hand to migrate (upgrade) from SQL2K named instance to SQL2K5 default instance. There are many intranet applications touching current SQL2K. I would like to perform this upgrade such that I don't have to touch any application code - meaning I don't have to change the connectionstring to point to new Default instance. How can I achieve this?
So, in otherwords, here is what I want to achieve:
Current Server: SQL2K: SERVER_AINSTANCE_A (named instance)
Upgraded Server: SQL2K5: SERVERB (default instance)
If I have both default, I could achive this by setting up DNS alias after migration done so that any call for SERVER_A would point to SERVER_B. But in my case, I don't have SERVER_A, I have named instance. Is there any solution?
Regards,
Vipul
View 1 Replies
View Related
Oct 10, 2001
I am trying to set up a Named Instance of SQL 2000 on the same machine that has a default instance of SQL 7.0. The setup always completes and I am able to register the Named Instance of the SQL Server with which it was installed on. However, when I try to connect the users to the database, with both windows and SQL authentication, I receive a SQL server not found error. I have tried an alias setup as well as physically specifying the port number in settup up an ODBC connection.
Has anyone ran into similar problems?
Also, has anyone been able to successfully complete the process as mentioned above?
View 1 Replies
View Related
Mar 2, 2007
I have a server with sql server 2005 installed as the default instance -- I have a piece of software that needs SQL2000 to be the default instance. Is there a way other than install new sql2005 named instance and move databases to rename my SQL2005 instance from <machinename> to <machinename>sql05 for example?
Bryan
View 2 Replies
View Related
Oct 4, 2000
The SQL Server Agent process is running. When I use EM to start a database integrity
check job, it fails with an error message of 22029 and the following:
[LOG] SQLServerAgent security context does not have server-autorestart privileges
I can not find error 22029 in Books on Line. I will go to Microsoft Knowledge base
and research this problem.
In the mean time if someone can help, it is much appreciated.
Thanks to all.
View 2 Replies
View Related
Nov 7, 2006
As part of Team Foundation Server the Integration Services are used. They are configured to start automatically but it doesn't. Status is "stopped". Trying to start the service manually fails too:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 07.11.2006
Time: 11:11:49
User: N/A
Computer: SDOSCARBUILDSRV
Description:
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
It uses default LogOnAs NT AuthorityNetworkService. Any idea what might be wrong and what to do?
Thanks
Hans-Peter
View 5 Replies
View Related
Aug 24, 2006
I have SQL Server 2000 Standard Edition (sp3a) running on a windows 2003 (sp4) Server.
It is a Production Server with 3 NAMED Instances and NO Default Instance.
Does anyone know if I can rerun the SQL Server Install and add a DEFAULT Instance to this box without disrupting the other Named Instances???
View 5 Replies
View Related
Oct 30, 2007
I installed SQL Server 2005 recently on a cluster. I didn't go for the default instance and instead I named the instance option. Now I would like to migrate everything from the named instance to the default instance, which I haven't yet installed.
Is this an easy process? What about the logins and the maintenance plans and jobs? Is there anything else I need to be aware of?
View 1 Replies
View Related
Apr 13, 2007
Hi
I've never had to do this, but when I downloaded the Web Workflow Approvals Starter Kit, it requested that I install the database into a User Instance of .SQLEXPRESS.
Now the problem is, I've installed it onto a default instance, so I was wondering whether you can create a named instance on top of a default instance... and if so, how would you do that?
Cheers
Chris
View 3 Replies
View Related
Jul 4, 2007
Why I am not able to start the Analysis Services Engine again as the error message from event viewer as:
Event Type: Error
Event Source: MSSQLServerOLAPService
Event Category: (289)
Event ID: 0
Date: 04/07/2007
Time: 10:45:48
User: N/A
Computer: computer_name
Description:
The service cannot be started: Message-handling subsystem: The message manager for the default locale cannot be found. The locale will be changed to US English. Message-handling subsystem: The message manager for the default locale cannot be found. The locale will be changed to US English. The following system error occurred: The filename, directory name, or volume label syntax is incorrect. . File system error: Error occurred during the creation of directory: '\?'.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
On SQL Server, when I start the Analysis services, the error message is : The SQL Server Analysis Services (MSSQLSERVER) service on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the performance logs and Alerts service.
Why is that? That is really frustrated and please any of you give me any advices or help on it. Thanks a lot in advance.
With best regards,
Yours sincerely,
View 8 Replies
View Related
Nov 15, 2007
The box I am trying to connect to is running two instances of SQL Server.
There is a SQL Server 2005 instance which is the default. There is a SQL Server 2000 instance which is named 'SQLSERVER'.
I can connect to the SQL Server 2000 instance no problem:<add key="ConnectionString" value="server=MYPCSQLSERVER;database=mydatabase;user id=****;password=****" />
However, I am having trouble connecting to the Default SQL Server 2005 instance. I have tried:
<add key="ConnectionString" value="server=MYPC;database=mydatabase;user id=****;password=****" />
but it doesn't work. I have tried explicitly setting SQL Server 2005 to use port 1434 (as SQL Server 2000 is running on port 1433), and then used:
<add key="ConnectionString" value="server=MYPC,1434;database=mydatabase;user id=****;password=****" />
but this doesn't work either.
Am I mssing something here? Any help much appreciated
Thanks...
View 2 Replies
View Related
Jan 17, 2007
If you were asked to install SQL 2005 on a machine, would u install a default instance or a named one? And why would u choose one over the other?? Also, r there any issues with using a default instance?
Thank you for all your help.
View 6 Replies
View Related
Oct 25, 2006
Hello,
I've got a question about failover with the database mirroring.
I have 3 servers, 2 with SQL 2005 and 1 with SQL Express as witness.
After getting some problems to install database mirroring with Windows authentification, i had to create an authentification by certificate.
All goes well but my problem is about my primary instance SQL alias.
The alias on the primary doesn't follow on the secondary when the primary is down.
I've searched on forums and in the internet SQL web sites, but i didn't find anything.
I create another alias on the secondary but i don't know how to modify it in T-SQL...
I would like to know if there's any solution to modify an SQL instance alias by transact-SQL? or if anyone has already install on its servers, a fail over automatic with one instance alias with data mirroring in T-SQL?
Thank you all for your help...
View 6 Replies
View Related
Oct 8, 2006
I can't get an instance of SQL Server 2005 to start using TCP/IP.
The issue is pretty basic: I have a local SQL Server 2005 that I can get to run and connect to it using Named Pipes.
The problem is that from a remote machine, although I can connect to it using Named Pipes, ASP.NET can't connect to it (when I'm in design mode, I can connect to the SQL server to configure Data Sources, but at run-time, it refuses to work).
So, I tried to switch to TCP/IP. I can't get it to work on the local machine. I get the following errors:
SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
TDSSNIClient initialization failed with error 0xd, status code 0x1.
I've looked up these errors, and most of them are basic "make sure protocols are enabled, make sure VIA is disabled, etc." but those aren't it.
Any ideas?
TIA
jdn
View 7 Replies
View Related
Dec 26, 2007
I have a SQL server with SQL 2000 installed and running, in parallel with a recent SQL 2005 installation (viaa named instance on the same box, etc.) - What I would like to do is "decommision" the SQL 2000 installation and "promote" the 2005 named instance to the default- is there a way to do this?
View 2 Replies
View Related
Feb 27, 2008
I will need to use a unique instance name. Do i first need to install SQL 2005 using the Default Instance name, than install using my unique Instance name?
Any help appreciated.
Thanks,
Kerry
View 6 Replies
View Related
Jan 15, 2008
Dear Experts,
I am running a named instance of SQL-Server 2005 SP2 on Win2003 with two local partitions C: and F:
The TCP settings for this instance have ecplicitly been set to use the port 1433.
The config file for SSIS (F:ProgrammeMicrosoft SQL Server90DTSBinnMsDtsSrvr.ini.xml) has been changed to:
<?xml version="1.0" encoding="utf-8"?>
<DtsServiceConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<StopExecutingPackagesOnShutdown>true</StopExecutingPackagesOnShutdown>
<TopLevelFolders>
<Folder xsi:type="SqlServerFolder">
<Name>MSDB</Name>
<ServerName>.INSTNAME,1433</ServerName>
</Folder>
<Folder xsi:type="FileSystemFolder">
<Name>File System</Name>
<StorePath>..Packages</StorePath>
</Folder>
</TopLevelFolders>
</DtsServiceConfiguration>
I have tried different logons (NetworkService, LocalSystem, DomainAdmin).
The service still refuses to start. There is no detailed message in the event log just that the service didn't respond in a reasonable time, doh!
Any help is welcome
Fridtjof
View 1 Replies
View Related
May 20, 2004
We installed SQL 7.0 first, then SQL 2000. SQL 7.0 is the default instance.
How can we change the default to SQL 2000?
View 5 Replies
View Related
May 15, 2008
I have SQL server 2005 Developers edition instaled on W2003 only one instance. When I'm trying to install SP2, service pack can't see default instance. I can only upgrace tools and other stuf. I need to upgrade server.
Hava anybody some idea?
Thank you
View 3 Replies
View Related
May 5, 2006
Problem: When the application installs it requires SQL Express
Server 2005. If it does not exist it will install it or
rollback. -> continue installation -> When the form
attempts to locate an SQL Instance on a machine that has not had SQL
server or any components connected before it shows up as
<null>. I need to have access to the server(s) instances in
order to build the application database inside SQL. Am I using
the wrong approach with SQLDMO? Is there adifferent method
to access the installed SQL Express 2005 connection string?
Current code to locate SQL Instances:
try
{
////////////////////////////////////////
// Search and List SQL Server Instances
////////////////////////////////////////
//set cursor to thinking/hourglass
System.Windows.Forms.Cursor.Current =
System.Windows.Forms.Cursors.AppStarting;
//begin
ArrayList aServers = new ArrayList();
SQLDMO.ApplicationClass acServers = new SQLDMO.ApplicationClass();
//loop through the servers found
for (int iServerGroupCount = 1; iServerGroupCount <=
acServers.ServerGroups.Count; iServerGroupCount++)
{
for (int iServerCount = 1; iServerCount <=
acServers.ServerGroups.Item(iServerGroupCount).RegisteredServers.Count;
iServerCount++)
{
aServers.Add(acServers.ServerGroups.Item(iServerGroupCount).RegisteredServers.Item(iServerCount).Name);
}
}
//add the servers to the drop down box
if (aServers.Count < 1)
{
string NotExist = "<No Servers Found>";
cboServers.Items.Add(NotExist);
cboServers.SelectedIndex = 0;
btnSQLDataBaseCheckDB.Enabled = false;
}
else
{
cboServers.Items.AddRange(aServers.ToArray());
//select the first item in the array index to display
cboServers.SelectedIndex = 0;
}
}
catch (Exception ServerException)
{
MessageBox.Show(ServerException.Message);
}
Slightly stuck at the moment with this. Any tips or leads in the right direction would be greatly appreciated.
View 1 Replies
View Related
Sep 15, 2005
Hello, PLEASE Help me.I have just installed the Quick Starts on my local machine, and it mentions that you will need a new instance of SQL called (local)/NetSDK.I already have the MS Personal Edition and the tutorials say to download the MS Desktop Engine. So what do i need to do in order to get teh Quick Start samples to work locally???Can i not just use my own instance and use the Grocer and other Databases there???Please Help
View 1 Replies
View Related
Aug 21, 2007
I have an ASP.NET project that uses a ASPNETDB.MDF file. This file is attached with a SQL Server Express everytime when I run the application, include debuging session. There are two debugging modes under Visual Studio 2005, through WebDev.WebServer or IIS. Both ways worked fine with this project until yesterday. Right now, whenever I try to debug it with WebDev.WebServer, it will show me an error:
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
But if I debug it with IIS it works fine. Also, using the same machine and same installation of Visual Studio 2005 I can debug another project with WebDev.WebServer, that also uses a .mdf file (a different file). So, seems to me I jsut have problem with one mode and one project. The only thing that I did yesterday that I think may be relevant was that I reinstalled Visual Studio 2005 SP1 to fix another issue. Anyone has an idea? Thanks!
View 3 Replies
View Related
Aug 18, 2006
Is this the only way to rename the default SQLEXPRESS instance name?
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q283811
Is there an easier way? I tried going to Register and changing it.. but that didn't seem to do anything.
View 3 Replies
View Related
Mar 16, 2008
I just installed Sql Server 2005, and opened the Sql Server management studio, and the connect to server dialog box popped up, i selected database engine, but what do I put in the server name box? I tried my computer name, and got an error, i tried localhost and got an error, i tried my computer name/localhost and got an error. I installed it as the default instance with windows authentication, and I verified that the sql server service is running, but I always get a login error. Can anyone help me get started?
View 5 Replies
View Related
Jul 23, 2005
Currently I have a server that has two instances of SQL Server that areboth heavily used. We are moving the databases that are on the defaultinstance of this server to a new server. Since the old server willonly need one instance (the current named instance) of SQL Server isthere a good way to remove the default instance and make the namedinstance the default? If this change is possible will the name of thecurrent named instance need to be changed? Will all of the programscurrently accessing the named instance need to change their connectionstring?
View 2 Replies
View Related
Mar 12, 2008
Hi,
Can I Install a default instance on Virtual SQL Server on a 2 node Cluster. If I already have a default instance on a different Virtual SQL Server on the same clustered Server.
What i am trying to do..
if i create 2 virtual sql Server (say sqlVi1 and sqlVi2)..
i want o connect using sqlVi1 and sqlVi2..not Sqlvi1 and SQlvi2Namedinstance.
If yes..How can I do it?
Thanks in advance
I Hope someone from Microsoft or MVPs will help me.
if this is not the corrcet forum...please point me the correct one
View 3 Replies
View Related
Feb 5, 2007
When I try to connect to a default Express instance in Management Studio at the machine (Windows XP SP2) where the instance is installed, I'm getting the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server)
What does provider: SQL Network Interfaces mean? Does it mean the Shared Memory, Named Pipes and TCP/IP?
Additional information:
1. The following Network Protocols are enabled: Shared Memory, Named Pipes, TCP/IP thru Configuration Manager
2. SQL Server Express default instance is running using NT
AUTHORITYNetworkService.
3. SQL Server Browser service is not running. I believe this is not needed unless I want to connect to the instance from another machine.
4. Has tried to disable Windows Firewall but I believe it should not be matter in this particular case since this is within the same machine.
5. Can connect to the instance in ODBC Administrator using System DSN thru Named Pipes or TCP/IP.
Can such error caused by not having sufficient memory so the system is running kind of slow?
View 2 Replies
View Related
Oct 7, 2015
How to identify an instance - default or named ?
Is there any parameter or any where in properties sql server show as 'Named' or ' Default'.
or
if SELECT SERVERPROPERTY ('InstanceName') result is blank, then can we assume it is a default one ?
View 2 Replies
View Related
Dec 1, 2005
Windows XP, SP2; MSDE 2000 Release A - on some installs of the XP SP2 MSDE installation fails, the section of the install log that applies is:
View 3 Replies
View Related
Jun 1, 2008
moving to a new sql server box because of a problem with the SAN its connected to.
started my named instance in single user mode and restored master. sqlserve.exe -c -m -s ovops
now the instance won't start. tried starting it with the -t3608 switch.. won't start!!
Its because my drive configuration is different on the new server than it was on the old server, I cannot start the instance because it is expecting model, msdb, temdb and all of the user databases on drives that don't exist?? what can I do?????
View 4 Replies
View Related
Aug 25, 2015
Though to setup Alwayson, it is necessary to have both SQl Instances to be in same version, same database file path , etc.But, is this possible to setup the AlwaysOn between a default and a named instance?
View 1 Replies
View Related
Jul 28, 2015
why we will go to install named instance as we having default instance already installed. Is there any advantage of named instance.
View 6 Replies
View Related
Nov 7, 2007
I have question about install both default instance and name instance on to one server. Do I need follow a specific order such as default instance first then name instance?
If my server already has two or more name instances, can I install one more default instance?
Thanks
View 1 Replies
View Related
