Hello,
Why would this issue syntax errors? How can it be made to work?
DECLARE @TKey as BigInt
DECLARE @TName as VARCHAR(32)
DECLARE @Tid AS VARCHAR(32)
SET @TKey=99
SET @TName='TestTABLE'
SET @Tid='TestTABLEID'
SET IDENTITY_INSERT @TName ON
INSERT INTO @TName (@Tid) VALUES (@TKey)
SET IDENTITY_INSERT @TName OFF
--PhB
I'm building a simple webform, except Visual Studio and my service provider have combined to drive me nutty.
First, I MUST use an ODBC connection to my remote SQL Server do to some unknown configuartion problem. I've been playing with Visual Studio for only a month, so normally when something goes wrong I can go look in the mirror and find the culprit. This is different. I've got a totally functional web form with a SQL Connection, but when I try to change it to an ODBC Connection, I get the following error.
An OdbcParameter with ParameterName '@CertHolder' is not contained by this OdbcParameterCollection
My coding is fine because I stole it straight from the walkthrough and it works. But the specifications that Visual Studio provide are quite suspect. Please note the failure to include some key "@" signs.
#Region " Web Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection
Me.cmdUpdate = New System.Data.SqlClient.SqlCommand
Me.cmdGetAll = New System.Data.SqlClient.SqlCommand
Me.cmdSelect = New System.Data.SqlClient.SqlCommand
Me.OdbcConnection1 = New System.Data.Odbc.OdbcConnection
Me.OdbcGetAll = New System.Data.Odbc.OdbcCommand
Me.OdbcSelect = New System.Data.Odbc.OdbcCommand
Me.OdbcUpdate = New System.Data.Odbc.OdbcCommand
'
'SqlConnection1
'
Me.SqlConnection1.ConnectionString = "this works fine"
'
'cmdUpdate
'
Me.cmdUpdate.CommandText = "UPDATE InsuranceData SET Name = @Name, Address = @Address, Address2 = @Address2, " & _
"City = @City, State = @State, Zip = @Zip, CertHolder = WHERE (CertHolder = @Cert" & _
"Holder)"
Me.cmdUpdate.Connection = Me.SqlConnection1
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Name", System.Data.SqlDbType.NVarChar, 50, "Name"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Address", System.Data.SqlDbType.NVarChar, 50, "Address"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Address2", System.Data.SqlDbType.NVarChar, 50, "Address2"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@City", System.Data.SqlDbType.NVarChar, 50, "City"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@State", System.Data.SqlDbType.NVarChar, 50, "State"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Zip", System.Data.SqlDbType.NVarChar, 50, "Zip"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@CertHolder", System.Data.SqlDbType.NVarChar, 50, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "CertHolder", System.Data.DataRowVersion.Original, Nothing))
'
'cmdGetAll
'
Me.cmdGetAll.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData"
Me.cmdGetAll.Connection = Me.SqlConnection1
'
'cmdSelect
'
Me.cmdSelect.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData W" & _
"HERE (CertHolder = @CertHolder)"
Me.cmdSelect.Connection = Me.SqlConnection1
Me.cmdSelect.Parameters.Add(New System.Data.SqlClient.SqlParameter("@CertHolder", System.Data.SqlDbType.NVarChar, 50, "CertHolder"))
'
'OdbcConnection1
'
Me.OdbcConnection1.ConnectionString = "This works fine"
'
'OdbcGetAll
'
Me.OdbcGetAll.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData"
Me.OdbcGetAll.Connection = Me.OdbcConnection1
'
'OdbcSelect
'
Me.OdbcSelect.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData W" & _
"HERE CertHolder = @CertHolder"
Me.OdbcSelect.Connection = Me.OdbcConnection1
Me.OdbcSelect.Parameters.Add(New System.Data.Odbc.OdbcParameter("CertHolder", System.Data.Odbc.OdbcType.NVarChar, 50, "CertHolder"))
'
'OdbcUpdate
'
Me.OdbcUpdate.CommandText = "UPDATE InsuranceData SET Name = @Name, Address = @Address, Address2 = @Address2, " & _
"City = @City, State = @State, Zip = @Zip WHERE CertHolder = @CertHolder"
Me.OdbcUpdate.Connection = Me.OdbcConnection1
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Name", System.Data.Odbc.OdbcType.NVarChar, 50, "Name"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Address", System.Data.Odbc.OdbcType.NVarChar, 50, "Address"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Address2", System.Data.Odbc.OdbcType.NVarChar, 50, "Address2"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("City", System.Data.Odbc.OdbcType.NVarChar, 50, "City"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("State", System.Data.Odbc.OdbcType.NVarChar, 50, "State"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Zip", System.Data.Odbc.OdbcType.NVarChar, 50, "Zip"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Original_CertHolder", System.Data.Odbc.OdbcType.NVarChar, 50, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "CertHolder", System.Data.DataRowVersion.Original, Nothing))
I NEVER EVER TYPED ORIGINAL_CERTHOLDER IN THE SQL PREPARATION
End Sub
Protected WithEvents btnSave As System.Web.UI.WebControls.Button
Protected WithEvents SqlConnection1 As System.Data.SqlClient.SqlConnection
Protected WithEvents ddlCertHolder As System.Web.UI.WebControls.DropDownList
Protected WithEvents txtName As System.Web.UI.WebControls.TextBox
Protected WithEvents txtAddress As System.Web.UI.WebControls.TextBox
Protected WithEvents ddlCH As System.Web.UI.WebControls.DropDownList
Protected WithEvents cmdUpdate As System.Data.SqlClient.SqlCommand
Protected WithEvents cmdGetAll As System.Data.SqlClient.SqlCommand
Protected WithEvents cmdSelect As System.Data.SqlClient.SqlCommand
Protected WithEvents txtAddress2 As System.Web.UI.WebControls.TextBox
Protected WithEvents txtCity As System.Web.UI.WebControls.TextBox
Protected WithEvents txtState As System.Web.UI.WebControls.TextBox
Protected WithEvents txtZip As System.Web.UI.WebControls.TextBox
Protected WithEvents OdbcConnection1 As System.Data.Odbc.OdbcConnection
Protected WithEvents OdbcGetAll As System.Data.Odbc.OdbcCommand
Protected WithEvents OdbcSelect As System.Data.Odbc.OdbcCommand
Protected WithEvents OdbcUpdate As System.Data.Odbc.OdbcCommand
'NOTE: The following placeholder declaration is required by the Web Form Designer.
'Do not delete or move it.
Private designerPlaceholderDeclaration As System.Object
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Comments? Suggestions, I am not positive about how to fix this.
Can I do something like the following with SQL Server?
DECLARE @Table_Name varchar(100)
SET @Table_Name = 'Accounts'
SELECT * FROM @Table_Name
I am writing a stored procedure in which I have a query that selects the Headings of Columns from another table...
I want to then create a loop that will contain a variable with the value of the column heading and then set the column to a value of NULL...
Is there any way to accomplish this???
I thought about placing these values into a temp table...
This is what I have so far...
Declare @QueryX nvarchar(500)
Declare @FieldName varchar(20)
Create Table #UpdateRejDoc
(
Abbreviation varchar(20)
)
Insert into #UpdateRejDoc
Select Abbreviation
From tbl_Titles
left JOIN tbl_TitleRouting on tbl_Titles.Title_ID = tbl_TitleRouting.Title_ID
Where tbl_TitleRouting.Application_ID = @Application_ID
While Exists (Select Abbreviation from #UpdateRejDoc)
Begin
Set @QueryX = 'Update DBLandfillUser.tbl_ObjectApprovals' +
'@AppName + Set @FieldName = null Where object_id =' + Cast(@object_id as VarChar(20))
End
I am attempting to export data on a daily basis via DTS to an XLspreadsheet. I would either like to: a) have a separate worksheet inthe spreadsheet for each export or b) a completely differentspreadsheet for each export. Whenever I attempt to use a variable asthe name of my table in the DTS package, it will not let me.Constructing a string and attempting to execute it also fails,although both of these work in query analyzer. Any advice?Peter
View 1 Replies View RelatedHello to all,
I hope that somebody can help me.
I have written a sql query to search Partner. I have a wtcomValidRelationships Table. There are two Fields (IDMember(type: Int) and RelationshipIDs(type: varchar(1000)) in this table.
Example: 3418 has 3422 RelationshipID and 3422 has 4088 RelationshipID, if i want to check if there is a relationship between 3418 and 4088.
declare @IDM int;
declare @IDO char(100);
set @IDM = 3418;
set @IDO = '4088';
select B.IDMember
from wtcomValidRelationships as A, wtcomValidRelationships as B
where A.IDMember = @IDM and charindex(cast(B.IDMember as char(100)),A.RelationshipIDS) > 0
and charindex(@IDO,B.RelationshipIDs) > 0
Using this query i get nothing.
I try to use constant in charindex and i get result.
declare @IDM int;
declare @IDO char(100);
set @IDM = 3418;
set @IDO = '4088';
select B.IDMember
from wtcomValidRelationships as A, wtcomValidRelationships as B
where A.IDMember = @IDM and charindex('3422',A.RelationshipIDS) > 0
and charindex('4088',B.RelationshipIDs) > 0
So i think that charindex doesn't work with variable. But I must use variable. Can someone help me? What should i do ?
Thanks
Best Regards
Pinsha
I've created a user variable but when I'm going through its variable collections for that TaskHost appears all the system users but not mine.
Why??
?th.variables.count
26
When I have 27 including the mine.
I am writing some functions that work on a time series database of prices, ie volatility, correlation. I need to use the SELECT TOP syntax, but cannot do this with a variable, ie 'SELECT @x TOP * from prices'. My solution is to simply have a function for each potential period that will be looked at - 30day_volatility, 60day_volatility, etc. I looked at setting the ROWCOUNT variable but this is not allowed in functions. I haven't posted any DDL because I think the question is general enough - How do I return n ordered rows from a function without using SELECT TOP, or is there a way to use SELECT TOP with a variable that I am not aware of.
Thanks!
Is there anyway anyone knows of that i can select columns using variable names without building an execute statement??
ie.
DECLARE @col varchar(10)
SELECT @col = "AuditID"
SELECT @Col FROM tblAudit
??
Anyhelp a bonus
Thanks
Daniel/
Greetings!I am now doing one type of analysis every month, and wanted to creattable names in a more efficient way.Here is what happens now, everytime I do the analysis, I will create atable called something like customer_20050930, and then update thetable by using several update steps. Then next month I will create atable called customer_20051031. Does anyone know if there is a betterway to do it? like using a macro variable for the month-end date? Noweverytime I have to change the table name in every single update step,which would cause errors if I forget to change one of them. By using amacro, I would only need to change it once.Thanks!
View 8 Replies View RelatedI want to create a SP that creates a new database, so I script-ed out the db and paste the script into new SP gui (SQL 2000). I want to pass it a variable for the data/log file location that is not the default location. The original script looks like this:
CREATE DATABASE [PWRR_DDS] ON (NAME = N'PWRR_DDS_Data', FILENAME = N'F:SQL SERVER FILESDatabasesdbName.mdf' , SIZE = 3118, FILEGROWTH = 10%) LOG ON (NAME = N'PWRR_DDS_Log', FILENAME = N'F:SQL SERVER FILESDatabasesdbName_Log.LDF' , SIZE = 5000, FILEGROWTH = 10%) COLLATE SQL_Latin1_General_CP1_CI_AS.
I replaced the path of the FILENAME variable like this:
CREATE DATABASE [PWRR_DDS] ON (NAME = N'PWRR_DDS_Data', FILENAME = @DBPath, SIZE = 5000, FILEGROWTH = 10%) LOG ON (NAME = N'PWRR_DDS_Log', FILENAME = @LogPath , SIZE = 5000, FILEGROWTH = 10%) COLLATE SQL_Latin1_General_CP1_CI_AS,
declaring the variables as char(500). The error I get is "Incorrect sybtax near '@DBPath'.
Any ideas for workaround?
Thanks,
EJM
Has someone managed to pass successfully a variable from a parent package to a child package? I€™ve tried a zillion permutations and I can€™t get it to work. The strange thing was that I was able to successfully do this with pre-RTM builds. Basically, what I am trying to do is:
The parent package has a variable, e.g. ExecutionID which I set using a script to System::ExecutionInstanceGUID. I verified that the variable is set correctly by dumping it to a SQL Server table.
I created a child package variable with the same name.
In the child package, I€™ve created a parent package configuration that points to the ExecutionID variable.
I am trying to read the variable in a Derived Column Task in which I have a column linked to @ExecutionID.
This doesn€™t work. Step-by-step instructions from someone who managed to concur this will be greatly appreciated.
Oh, I didn€™t have any luck hitting a breakpoint in a script task inside a child package with both in and out of process execution also.
I need to execute a stored procedure which selects all columns from the passed table. The table used is a variable.
Select * from @Passedtablename. This won't work. Any insights.
is it possible to use twice declared. Variable names-
declared. Variable and after KILL
and use the same declared. Variable
like
DECLARE
@StartDate datetime
KILL @StartDate datetime (remove from memory)
use after with the same name
i have 2 big stored PROCEDURE
i need to put one after one
and psss only 1 Variable name to the second stored PROCEDURE
like this i don't get this error
The variable name '@Start_Date' has already been declared. Variable names must be unique within a query batch or stored procedure.
Msg 134, Level 15, State 1, Line 146
The variable name '@End_Date' has already been declared. Variable names must be unique within a query batch or stored procedure.
i use like
KILL @endDate ??
KILL @StartDate ??
TNX
hi ,
i got this error ... i have tried various scenarios.. nothing works for me... can any one gimme the proper guidance...
The variable name '@CCSID' has already been declared. Variable names must be unique within a query batch or stored procedure.
thanx in advance
raj
Ok I am faced with working with XML on a regular basis, which is fine.
DECLARE @ViewSN INT
IF NOT EXISTS (select null from tblviews where viewcode = 'loadAtTerm') --<workflowEventType>loadAtTerminal</workflowEventType>
insert into tblviews (ViewName,Description,OutBoundForm,StoredProcSN,TriggersReply,ViewCode,DispXactLayer,DispXactViewType,DispXfcTag,Comments)
select 'QC:WF-LoadAtTerminal','This View Corresponds to the XML for loadAtTerminal in Omnitracs Workflow','0',NULL,'0', 'loadAtTerm','MCOM','MCOM',NULL,NULL
[code]...
What would be really useful is to be able to present any xml file and automatically parse the NODE names into a memory variable table and then the fields of each node in another.
I'm exporting reports daily to a file share and I need to rename the reports with a pseudo time stamp.
Example: I have a report named "Disk Usage" and when I export (using a data-driven subscription) I want to rename it "Disk Usage - (Jan07)" - or something to that effect.
Can anybody tell me how to accomplish this.
I am designing a package to export staging tables into a flat file.The names of the tables will be: TableAStaging_YYYYMM and TableBStaging_YYYYMM. As you can see the names of the tables will be changing each month.
The flat files will have similar naming: C:MyPathFlatFileTableAStaging__YYYYMM and C:MyPathFlatFileTableAStaging__YYYYMM.I want to run the package as an sql job in two steps, one for each table.I need to dynamically pass the table names and file names (together with the path) to the IS package.
As part if a recent requirement I have to export Chinese/Singaporean names in a CSV file. The data in the tables is a NVARCHAR(256).
I am using a FlatFile Connection manager where all the present columns from the table are exported as NVARCHARs. My understanding was that the Chinese/Singaporean names would blend seamlessly with NVARCHARs in place. But, they get garbled when pushed to the CSV.
Here is the connection manager setup
There are a lot of suggestions of fixing this by copying/pasting to a notepad file and changing the formatting... But I cant do that since the file is generated using a schedules SSIS package. How can I tweak the process to fix the issue?
Hi
I was wondering if anyone has an idea of how we could find the table names and column names of the tables in our Sql server database at runtime/dynamically given our connection string? Please let me know.
Thanks.
I'm going to be setting up DB mirroring between two SQL Server 2005 boxes. Since these are on two different servers, can the instance names be the same? Is there any reason NOT to do so if the mirror server is going to be used exclusively for DB mirroring?
For example: if the my primary DB is located on SERVER1INSTANCE1, can the mirror be SERVER2INSTANCE1 or do the instance names have to be different even though they're on different boxes.
Thanks!
I'm trying to do an update query that looks like this:
UPDATE
PAEMPLOYEE
SET PAEMPLOYEE.LOCAT_CODE = EMPLOYEE.PROCESS_LEVEL
FROM
PAEMPLOYEE A
JOIN EMPLOYEE B ON A.EMPLOYEE = B.EMPLOYEE
It's erroring out on the Employee prefix B.EMPLOYEE saying:
..."does not match with a table name or alias name used in the query"
Is it wrong or will it cause problems to have a field name the same as the table name?
Hello there. I'm trying to populate a drop down box with a list of all available instances of SQL server (express or not) available on a network. To list all instances I'm using EnumAvailableServers() in SmoApplication.
The issue is that the Instance column in the returned data table is always empty, and both the Name and the Server columns contain the same string -- the name of the computer the SQL server is installed. Locally I have SSE installed, the instance name is <computer_name>SQLEXPRESS, however, using Smo I can't seem to get to the either full instance name or just the instance name. I can't assume SQLEXPRESS, since there may be more than one installed.
Alternately I used EnumRegisteredServers() in SmoApplication.SqlServerRegistrations and that, while returning instance information (can be retrieved from the RegisteredServer in the returned collection), doesn't always return the remote SQL servers in the list.
Any idea how can this be done? Maybe I'm going at it the wrong way, maybe there's another class / method I need to use to retrieve all instances?
Thank you
Hi All,
I have these two commands that I execute at the end of my stored procedure. I get an email every time I execute this stored procedure whether the select statement returns a value or not. But I only want to get an email if select statement returns an Error value. How can I accomplish this?
set @cmd = 'osql -S server -U user -P psswd -q "set nocount on; select distinct(rtrim(col1)) from ##table where datediff(dd,col2,getdate()) = 1 and (col1 like ''%Error: %'')" -h-1 -w 1025 -o J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @cmd, no_output
SET @email = 'mailsend -f someone@mymail.com -d -smtp -t someone@mymail.com -sub "Error Log Errors" -m J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @email, no_output
Thanks.
Hi All,
I have these two commands that I execute at the end of my stored procedure. I get an email every time I execute this stored procedure whether the select statement returns a value or not. But I only want to get an email if select statement returns an Error value. How can I accomplish this?
set @cmd = 'osql -S server -U user -P psswd -q "set nocount on; select distinct(rtrim(col1)) from ##table where datediff(dd,col2,getdate()) = 1 and (col1 like ''%Error: %'')" -h-1 -w 1025 -o J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @cmd, no_output
SET @email = 'mailsend -f someone@mymail.com -d -smtp -t someone@mymail.com -sub "Error Log Errors" -m J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @email, no_output
Thanks.
How can I get all SQL commands in SqlServer? How can I trace this commands?
Thansk
Hello,
I finally got access to Northwind/pubs.
I would like to know when and why do we use the following set commands. The SQL Server BOL does not say why and when to use these commands.
Thanks in advance!!!
sqlnovice123
Option Default Setting
Set nocount OFF
Set rowcount 0
Set ansi_nulls ON
Set quoted_identifier ON
Hi guys,I wanna ask bout the problem with my web application. I'm doing a select a statement from table 1 and and with the query results i got, i need it to store the result on table 2. How will i do this? I need your tips and suggestions.
View 1 Replies View RelatedI'm running asp.net 2.0 and acessing MSSQL 2K. I am trying to run a query in which I need to set up variables first. I tried the following group of commands as shown, passing it to the SqlDataReader object, but it failed.. does anyone know how i can pass multiple SQL commands? MainQuery = "declare @MinGrades as Table(GradeID Bigint) " & _ " INSERT @MinGrades SELECT MIN(CreditGrades.SplitID) AS Expr1" & _ " FROM CreditGrades INNER JOIN" & _ " CreditGradeSplits ON CreditGradeSplits.CreditGradeSplitID = CreditGrades.SplitID " & _ " WHERE (CreditGrades.x0x30 = - 1 OR " & _ " CreditGrades.x0x30 >= 0) AND (CreditGrades.x1x30 = - 1 OR " & _ " CreditGrades.x1x30 >= 0) AND (CreditGrades.x2x30 = - 1 OR " & _ " CreditGrades.x2x30 >= 0) AND (CreditGrades.x3x30 = - 1 OR " & _ " CreditGrades.x3xNOD >= 0) " & _ " GROUP BY CreditGradeSplits.CreditGradeGroupID" & _ " Select * from @MinGrades "
View 2 Replies View RelatedI am experiencing a situation where I issue a lengthy SQL command to MS SQL Server 7.0 through MTS and it "disappears" - no errors or recordsets are returned. The command is "SELECT * FROM CUSTOMERS WHERE LASTNAME LIKE 'SMITH%'". When I issue this command from SQL Query Analyzer it takes 27 seconds to return 87 rows. When I issue this exact same command through MTS it does not return at all.
I've used the SQL Profiler to analyze the requests. It shows the commands from MTS starting but they never stop (or at least the profiler never reports them as stopping). The same commands coming from Query Analyzer are reported as starting and stopping without fail.
Here's a twist: I can issue less demanding commands (ie, one that doesn't take so long to process) through MTS and they come back fine. For example, when a user logs into my application, I use an SQL statement to verify the user name and password and status the user as logged in. This is routed through MTS and it comes back fine in less than a second. Same application, same PC, same MTS and SQL server, same SQL database. The only difference is that the CUSTOMERS table has over 800,000 records and the USERS table has only 5 records.
PLEASE HELP!
Hi,
I am very new to sql server and I have been reading up on the dbcc commands. For instance, DBCC SHOWCONTIG where do I execute this command? I went into the cmd prompt and opened osql and typed:
1> DBCC SHOWCONTIG
2> GO
This gives me the information for what I assume is the master database. But, how do I use this command under the other databases?
Also, I have been trying to learn how to determine when to do index maintenance by using the index tuning wizard. But, I don't know what a workload is. Can someone point me in the right direction or give me some information about this topic.
Thanks,
Laura
Hi
Please can someone point me in the direction, i built a very badly designed database consisting of only one huge table when i first started databases, since learning about normalization i have designed and set up a new database which consists of many more tables instead of just the one. My question is where do i start in transfering the data from the old single tabled database to my new multi-tabled database?
I have MS SQL server 2005 managment studio if that helps, but want to transfer around 200,000 rows of data into the new database. Both new and old databases are on the same server.
thanks in advance
I have a job that runs between the hours of 10 PM and 9 AM. It launches a controller stored procedure that will call other stored procedure until the entire process is done.I would like the controlling stored procedure to only call the steps between the hours of 10PM and 9AM also.. So at 8:59 AM it will start the next step, but at 9:00 AM it will exit.
View 6 Replies View Related