SQL For Equipment Up Time During 2007
Dec 20, 2007
I have a table with equipment ID, transaction ID, date of transaction. How can I write a sql so that the result is a list of
equipment with % up time during 2007.
Transaction ID: 100 is down, 200 is up. Example is below the table
Equipment ID Transaction ID Date
1 200 1/12/2007
2 100 2/12/2007
1 100 2/25/2007
3 100 3/10/2007
2 200 3/14/2007
From the table I know that equiment 2 was down for 32 days and up time % during 2007 is (365-32)/365*100
How can I write a sql in order to achieve that
Daniel
sql learner
View 8 Replies
ADVERTISEMENT
Jun 22, 2006
The TSQL below all works except the bolded part at the end. I'm want to grab only the most recently logged piece of equipment not the most recent and all past ones as well which is what I've got doing minus the bolded part below. But I don't know how to say get this Equipment ID etc and only the most recently logged one to find its present location. The bolded part below is just there to show what I want it to do I know you can use an aggregate in a where clause. So in the first table listed tblRdrLog there is a column Time that I want to do this on so a.Time. I don't want to display a.Time just reference.
String dbsql = " SELECT a.EquipmentID " +
" , f.Subcategory " +
" , c.Area " +
" , d.Room " +
" FROM tblRdrLog a " +
" JOIN tblRdrInfo b ON a.ReaderID = b.ReaderID " +
" JOIN tblRdrArea c ON b.AreaID = c.AreaID " +
" JOIN tblRdrRm d ON b.RoomID = d.RoomID " +
" JOIN tblEquipInfo e ON a.EquipmentID = e.EquipmentID " +
" JOIN tblEquipSubcat f ON e.SubcategoryID = f.SubcategoryID " +
" WHERE a.EquipmentID IN (SELECT a.EquipmentID " +
" FROM tblEquipInfo a " +
" JOIN tblEquipCat b ON a.CategoryID = b.CategoryID " +
" JOIN tblEquipSubcat c ON a.SubcategoryID = c.SubcategoryID " +
" LEFT OUTER JOIN tblEquipMake d ON a.MakeID = d.MakeID " +
" LEFT OUTER JOIN tblEquipModel e ON a.ModelID = e.ModelID " +
" JOIN tblStatus f ON a.StatusID = f.StatusID " +
" WHERE b.CategoryID = '" + this.ddlCategory.SelectedValue.ToString() + "' ";
if (!"".Equals(this.ddlSubcategory.SelectedValue.ToString()))
dbsql += " AND c.SubcategoryID = '" + this.ddlSubcategory.SelectedValue.ToString() + "' ";
#region Advanced Search Criteria
// Check whether advanced search submitted
if (adv)
{
if (!"".Equals(this.tbSerialNo.Text.ToString()))
dbsql += " AND a.SerialNo = '" + this.tbSerialNo.Text.ToString() + "' ";
if (!"".Equals(this.ddlMake.SelectedValue.ToString()))
dbsql += " AND d.MakeID = '" + this.ddlMake.SelectedValue.ToString() + "' ";
if (!"".Equals(this.ddlModel.SelectedValue.ToString()))
dbsql += " AND e.ModelID = '" + this.ddlModel.SelectedValue.ToString() + "' ";
if (!"".Equals(this.ddlStatus.SelectedValue.ToString()))
dbsql += " AND f.StatusID = '" + this.ddlStatus.SelectedValue.ToString() + "' ";
}
#endregion
dbsql += " ) " +
" AND a.Time = max(a.Time) " +
"";
View 11 Replies
View Related
Nov 9, 2006
I apologize ahead of time if this has been covered. I tried searching but found only the OS specific response to my question (http://www.microsoft.com/windows/timezone/dst2007.mspx).
With the coming changes to DST in 2007, is there -- or is there even a need to -- patch either SQL Server 2005 or 2000 to account for those changes?
View 10 Replies
View Related
Feb 19, 2008
I am a novice to this type of setup and I need advice.
We have three field offices currently using A VPN over DSL connection to a server in the main office. We use a program that has 11 licenses for all the users and will purcahse 2 more licenses with the upgrade. As you can seee, not all employees are users of the software and for the moent the 11 licenses are adequate. We have 25 computers including the server, 21 employees, 15 in main office and four in one field office and 2 in another. All computer workstations are WIN XP PRO and the server is currently running Server 2003.
The program we currently use is a client/network where the employees fille out the forms and then the data is saved on the main home based server. No data is local to the user. At the workstations, only a small kernel of the client software is installed but it is a significant size and over DSL it is relativel slow to make the connection and save the data to the home server. Speed of this connection is not the issue, however.
We are going to upgrade the current server later this year and install either Server 2008 Standard or Small Business Server.
Our issues are many and suffice it to say I am not sure what to do,but am asking for help only with this one.
Issues
We may purchase an Enterprise version of software that we currently use. This requires SQL databses that we do not use in the present version.
Question. Do we need a Separate SQL server. The program developers say we should have a separate server, but the company does not want to purchsae a separate server because of cost. They want to use the single server for all users and as a data storage server for all other work related data not used by the main software. The program vendor says that there may be issues with this setup because we also may use, in the future, another program that may be server based and therte could be a "slowdown" in usage. This future program is not known to me a this time as they have not made this decision as yet so it does not enter into the current scenario.
I feel that a separate server for SQL is necessary because of the needs of each of the users in each of the field offices and the "load" they currently place on our current server.
Thanks
wyrover
View 1 Replies
View Related
Mar 27, 2007
This isn't a performance type of question, or whose CPU is bigger, but I'm more interested in knowing what people use out there as far as monitor setups go.
The root of the question stems from working in large package where there are many components laid out on the work flow. What do you use to work with large layouts? I constantly find it troubling to view enough of my package and am always zooming out to see more of the package. However, when doing that, the text becomes unreadable, of course.
I currently use a dual-monitor setup using my laptop and a LCD flat screen.
Resolutions on the laptop is 1920 x 1200 and the LCD monitor is 1280 x 1024. This helps to keep windows and output screens on one monitor while keeping the work flow on the other. Even still, I wish I had more screen real estate.
So, what say you?
View 6 Replies
View Related
Mar 3, 2008
Hi
everybody.
I am new to VBA,.,, I Have created a folder under inbox in Outlook 2007 which stored the receipients information
like name, E-mail, which is not present in the address book of outlook.
I have imported this folder in access 2007. My problem is ... it does not display the email address.
Rest of the informations is displayed... Is there any way i could do this.??
is there any way i could get the email addresses to appear(import/get) in to the access table???
Is there any module i mite have to create??
Plz help...
thanks a million
View 1 Replies
View Related
Aug 7, 2007
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
View 5 Replies
View Related
Feb 20, 2007
Hi everyone,
I am new to SQL Server. I have SQL 2007 installed on win 2003 server, my problem is when I try to start the Sql 2007 server I get the error message "The service control action cannot be completed as no service has been selected"
Thanks in advance
Arunchu from London
View 4 Replies
View Related
Jan 22, 2007
Sharepoint Server Portal 2007, MSSQL 2005, Reporting Services
When I try to integrate Reporting Services in Adminitsrator, for url of RS I write this: http://servername/ReportServer/ and click OK.
But when I try to go to 'Set Server defaults' or 'Managed Shared Shedules' I get this:
Server was unable to process request. ---> Client found response content type of '', but expected 'text/xml'. The request failed with an empty responseWhat should I Do ?
View 1 Replies
View Related
Feb 1, 2007
I have bcm with outlook 2007 and accounting express. when i create an opportunity in bcm, everything is fine. when i click the convert to quote button, it dumps all of the item information (quantity, name, description, price, tax....) into the description field in accounting. Then I have to copy each piece out of the description field into it's appropriate field in accounting 2007 express. Where is the mapping for these fields, so that I can map each one correctly? Is there something else i should be doing?
View 1 Replies
View Related
Mar 12, 2008
I want to user 'acCmdExportFixedFormat' in ms-access to save reports as PDF and XPS.
when i use the code runcommand acCmdExportFixedFormat i have to set manually the filename.
I want to give the filename in my vba code. How do i user this
View 4 Replies
View Related
Mar 18, 2007
Can Moneycounts 9.0 (data) be imported to Quickbooks 2007? If so How?
View 2 Replies
View Related
Jun 12, 2008
I know this is not SQL server related. Do anyone know good Third-party tools to backup sharepoint 2007? I have looked at www.avepoint.com and ideras tools but didn't find price listings. I am looking which has reasonable price and efficient.
Only xpurt ownly
View 4 Replies
View Related
Dec 2, 2007
hi everybody
I've been working in the database field for 9 months
I started from very simple tables, to some sql stuff
And then I started studying SQL Server 2005 extensively until I took MCTS SQL Server 2005
During that time, I was building a database for a new company from scratch, and while I build it for them I keep on reading books and learning, and using this knowledge to upgrade the database
Recently, I could successfully migrate the back-end to SQL Server 2005, and after days of struggling I could connect the front end to it via ODBC in a LAN
My next step is connecting the database through the internet, so I just changed the server name in the DSN file to the address of the server, and opened the ports, but it didn't work....
Can you tell me what's the problem?
Is there a book that can help me do this thing?
I can buy any book and I have the will to learn, provided that I'll apply for MCITP Database Developer next months
Thank you..
View 20 Replies
View Related
Mar 24, 2008
I have installed System Center Essentials on our network. Everything seems to be working but we are now getting Perflib errors (event id 1008) on our windows 2000 servers. This error indicates there is a problem with our ASP.net v2.xx.xx.xx. We have been unable to resolve this and are looking for more things to try.
View 5 Replies
View Related
Jul 31, 2007
Haven't been able to find much information on using openrowset with excel 2007 xlsx files. I've tried the following with no success so far.
SELECT * FROM OPENROWSET('Microsoft.ACE.OLEDB.12.0',
'Excel 12.0 Xml;Database=\serverfolderfile.xlsx;HDR=No;IMEX=1',
'SELECT f1 FROM [Raw Keywords$] WHERE f1 IS NOT NULL')
If anyone knows the correct way to do this please tell me.
View 3 Replies
View Related
Feb 20, 2007
Hi,
I'm having troubles connecting the webparts on SharePoint 2007. I installed the RSWebParts package from SQL Server 2005 Reporting Services on my MOSS 2007 box. The installation went smoothly and I can add both Report Explorer and Report Viewer on a page. But when I try to connect RE to RV I get the following error:
An unexpected error has occurred.
Web Parts Maintenance Page: If you have permission, you can use this page to temporarily close Web Parts or remove personal settings. For more information, contact your site administrator.
So I have to go to the maintenance page and remove the web parts.
Have anyone managed to bypass this and make them work together?
Thanks,
View 1 Replies
View Related
Oct 31, 2007
Is anyone attempting or has anyone successfully deployed MOSS2007 with a SQL 2005 Database Mirror on the backend? We are doing it in our lab with the automatic failover (principal, mirror & witness) and the SQL portion works great. The only issue is we have is that we have to manually switch MOSS over (via Sharepoint 3.0 Central Admin or stsadm) to the new content database on the other server. Thank you
We have reviewed the White Paper that Microsoft offered with no help to our issue.
View 1 Replies
View Related
Feb 21, 2007
hellow all,
i installed SqlServer 2005 sp2 on my server.
now, how do i import excel 2007 files in SSIS? i don't have office 2007 installed on my computer, but i've got some .xslx that i would like to try ro import. i tried to create an OLEDB connection, but i don't know which provider to choose.
anyway, can i do it without the sp2 or office 2007 installed on my server?
thanks for tour reply!
View 5 Replies
View Related
Oct 26, 2006
Is there any way that I can connect an Access 200? front end through .NET?
View 1 Replies
View Related
Jan 16, 2008
Hi Experts,
The trigger is not sucessfully calling the Stored Procedure. This was working up until last year (12/21/2007 @ 1600 hrs.)Here I am providing codes for both Trigger and Storedprocedure.Can you help me out where the problem is?
Trigger
USE [personnelreq]
GO
/****** Object: Trigger [tgrTracking] Script Date: 01/16/2008 11:55:29 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER OFF
GO
/*****************************************************************************************************************************************************************
* Trigger Name: tgrTracking
* Description: Calls the CalcTrackingHours stored procedure for replacement and net staff addition
* requisitions when the requisitions are emailed, transferred, or completed.
* History
* TKT/CO # Date Developer Description
* ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* 01/03/2005 Zsofia Horompoli Created
* CO#1570 03/22/2005 Zsofia Horompoli Added originator email tracking for transfer events
*****************************************************************************************************************************************************************/
CREATE TRIGGER [tgrTracking] ON [dbo].[Log2]
FOR INSERT
AS
DECLARE @reqId int -- store requisition ID
DECLARE @eventId int -- event value inserted
DECLARE @parentId int -- store parent requisition ID
DECLARE @eventTime datetime -- store date/time of event
DECLARE @email varchar(50) -- store email address
DECLARE @logId int -- store ID assigned to the record in the Log2 table
DECLARE @location varchar(30) -- Location
DECLARE @title varchar(30) -- Job title
DECLARE @multiReq int -- > 0 = Multi NSA
DECLARE @origMail varchar(50) -- Originator's email address
DECLARE @subject varchar(200) -- Email subject line
DECLARE @from varchar(50) -- From email
DECLARE @body varchar(8000) -- Email body
DECLARE @reqType int -- Requisition type (0-replacement, 1-net staff addition, 6-Bonus)
DECLARE @sReqType varchar(30) -- Requisition type description
DECLARE @appEmail varchar(500) -- Approvers' email addresses
SELECT @from = 'compensationandbenefits@west.com'
DECLARE @inserted_rows AS CURSOR -- hold the inserted rows
SET @inserted_rows = CURSOR FOR
SELECT id,reqid, timestamp, event, stuff(notes,1,patindex('%:%',notes),'') AS email FROM inserted -- get the Log2 id,requisition id, event, timestamp, and email address from the updated/inserted rows
OPEN @inserted_rows
FETCH NEXT FROM @inserted_rows INTO @logId, @reqId, @eventTime, @eventId, @email
WHILE (@@FETCH_STATUS = 0)
BEGIN
--Is this an email/transfer/complete/deny event?
IF (@eventId = 4 OR @eventId = 6 OR @eventId = 7 OR @eventId = 0 OR @eventId = 10)
BEGIN -- Yes, is this a deny event?
IF (@eventId = 0)
BEGIN --Yes, is this an active replacement/net staff addition/parent multi NSA requisition?
SELECT @parentId = id
FROM reqs2 r
WHERE requisitiontype in (0,1) and id = @reqId and
(SELECT ParentReqId from ParentChild WHERE ChildReqId = @reqId) IS NULL and
NOT (markedfortransfer = 0 AND logging <> 1) AND markedfortransfer <> 2
END
ELSE IF (@eventId = 6)
BEGIN
SELECT @parentId = id
FROM reqs2 r
WHERE requisitiontype IN (0,1,6) AND id = @reqId AND
(SELECT ParentReqId FROM ParentChild WHERE ChildReqId = @reqId) IS NULL and
NOT (markedfortransfer = 0 AND logging <> 1) and
(SELECT id FROM Log2 WHERE reqId = @reqId AND event = 0) IS NULL
END
ELSE IF (@eventId = 7 OR @eventId = 10)
BEGIN
SELECT @parentId = id
FROM reqs2 r
WHERE requisitiontype IN (0,1) AND id = @reqId AND
(SELECT ParentReqId FROM ParentChild WHERE ChildReqId = @reqId) IS NULL and
markedfortransfer <> 2 and
(SELECT id FROM Log2 WHERE reqId = @reqId AND event = 0) IS NULL
END
ELSE
BEGIN -- No, is this an active replacement/net staff addition/parent multi NSA requisition?
SELECT @parentId = id
FROM reqs2 r
WHERE requisitiontype IN (0,1) AND id = @reqId AND
(SELECT ParentReqId FROM ParentChild WHERE ChildReqId = @reqId) IS NULL and
NOT (markedfortransfer = 0 AND logging <> 1) AND markedfortransfer <> 2 and
(SELECT id FROM Log2 WHERE reqId = @reqId AND event = 0) IS NULL
END
--Is this a requisition to be tracked?
IF @parentId is not NULL
BEGIN --Yes, is this a transfer event?
IF @eventId = 6
BEGIN --Yes, retrieve information for email
SELECT @location = RTRIM(L.DESCR), @title = RTRIM(PT.DESCR), @multiReq = (SELECT COUNT(*) FROM ParentChild WHERE ParentReqID = R.id), @reqType = R.requisitiontype
FROM reqs2 R
LEFT OUTER JOIN TDSdev.dbo.PS_LOCATION_TBL L ON R.sitename = L.LOCATION
LEFT OUTER JOIN TDSdev.dbo.PS_JOBCODE_TBL PT ON R.jobtitle = PT.JOBCODE
WHERE R.id = @reqId
-- Get email addresses to use
EXEC sel_EmailUsers @reqId = @reqId, @bApprover = 1, @currentUser = NULL, @origEmail = @origMail OUTPUT, @appEmail = @appEmail OUTPUT
--Set requisition type description
IF @reqType = 0
BEGIN --Replacement requisition
SELECT @sReqType = 'Replacement'
END
ELSE IF @reqType = 1 AND @multiReq > 0
BEGIN --Multi-NSA
SELECT @sReqType = 'Multiple Net Staff Addition'
END
ELSE IF @reqType = 1
BEGIN --NSA
SELECT @sReqType = 'Net Staff Addition'
END
ELSE IF @reqType = 6
BEGIN --Bonus
SELECT @sReqType = 'Bonus'
END
--Build subject line
--Do we have a location?
IF @location IS NULL
BEGIN --No, default to Nothing
SELECT @location = ''
END
--Do we have a job title?
IF @title IS NULL
BEGIN --No, default to Nothing
SELECT @title = ''
END
SELECT @subject = @location + ': ' + @sReqType + ': ' + CAST(@reqId AS varchar(15)) + ': ' + @title
--Set email body
IF @reqType = 6 -- If Bonus Req
BEGIN
SELECT @body = '<p>Bonus requisition number ' + CAST(@reqId AS varchar(15)) + ' has been processed by Compensation.</p>'
SELECT @body = @body + '<p>If you have any questions, please contact us at <a href=''mailto: compensationandbenefits@west.com'' target=''_blank''>compensationandbenefits@west.com</a> .</p>'
END
ELSE IF @reqType IN (0,1) -- If Net Staff or Replacement Req
BEGIN
SELECT @body = '<p>Requisition number ' + CAST(@reqId AS varchar(15)) + ' has been finalized and sent to Human Resources on ' + convert(char(10),@eventTime, 101) + ' at ' + substring(convert(char(19),@eventTime, 100), 12, 8) + ' for recruiting.</p>'
SELECT @body = @body + '<p>If you have any questions, please contact us at <a href=''mailto: compensationandbenefits@west.com'' target=''_blank''>compensationandbenefits@west.com</a> .</p>'
END
--Send email
EXEC usp_SMTPMail @SenderAddress = @from, @RecipientAddress = @origMail, @Subject = @subject, @Body = @body, @Cc = @appEmail
END
-- Call the CalcTrackingHours stored procedure
IF @reqType IN (0,1)
BEGIN
EXEC CalcTrackingHours @event = @eventId, @reqId = @reqId, @emailTo = @email, @endDateTime = @eventTime, @logId = @logId
END
END
END
FETCH NEXT FROM @inserted_rows INTO @logId, @reqId, @eventTime, @eventId, @email
END
--clean up
CLOSE @inserted_rows
DEALLOCATE @inserted_rows
Stored Procedure is
USE [personnelreq]
GO
/****** Object: StoredProcedure [dbo].[CalcTrackingHours] Script Date: 01/16/2008 12:01:33 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER OFF
GO
/****** Object: Stored Procedure dbo.CalcTrackingHours Script Date: 4/12/2005 9:20:19 AM ******/
/*****************************************************************************************************************************************************************
* Stored Procedure Name: CalcTrackingHours
* Description: Determines the appropriate tracking level, the number of business hours the requisition
* spent at the current tracking level and inserts this information into the timeLog table
* History
* Date Developer Description
* ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
* 01/03/2005 syszxh Created
*****************************************************************************************************************************************************************/
CREATE procedure [dbo].[CalcTrackingHours]
@event int, -- 4=Emailed,6=Transferred,7=Completed
@reqId int, -- Requisition Id
@emailTo varchar(50), -- Email address requisition was forwarded to
@endDateTime datetime, -- Date/time of event
@logId int -- ID assigned to new record in the Log2 table
as
set nocount on
declare @currentUserType as int -- Current user type
declare @startDateTime as datetime -- Date/time requisition arrived at current step
declare @newUserType as int -- New user type
declare @currentTrackLevel as varchar(5) -- Tracking level to be inserted into the timeLog table
declare @newTrackLevel as varchar(5) -- New tracking level
declare @trackEmail as varchar(50) -- Email address at current tracking level
declare @count as int -- counter variable
declare @errorValue as int -- Error flag (1 = start date/time missing)
declare @trackHours as decimal(10,2)
select @errorValue = 0
select @startDateTime = NULL
-- Retrieve last email's user type, date/time stamp, and email address
select top 1 @currentUserType = userType, @startDateTime = timestamp, @trackEmail = n.userid
from personnelreq.dbo.Log2 l left outer join personnelreq.dbo.names2 n on stuff(notes,1,patindex('%:%',notes),'') = n.userid
where (l.event = 4 or l.event = 10) and timestamp <= @endDateTime and reqid = @reqId and l.id < @logId order by l.id desc
-- Last email found?
if @startDateTime is NULL
begin
-- No, this is the very first email, retrieve new user type
select @newUserType = userType
from personnelreq.dbo.names2 n
where userid = @emailTo
-- Is new user @C&B?
if @newUserType = 2
begin -- Yes, set new tracking level
select @newTrackLevel = 'cb1'
end
else
begin -- No, set new tracking level
select @newTrackLevel = 'dept'
end
end
else
begin
-- Is this event = email?
if @event = 4
begin
-- Retrieve new user type
select @newUserType = userType
from personnelreq.dbo.names2 n
where userid = @emailTo
-- Is the current user the same as the new user?
if @currentUserType = @newUserType and @emailTo = @trackEmail
begin
-- Yes, get latest level
select top 1 @newTrackLevel = trackLevel
from timeLog
where reqID = @reqId and trackEmail = @trackEmail and dateIn = @startDateTime
order by dateIn desc
select @currentTrackLevel = @newTrackLevel
end
-- Is the current user type @C&B?
else if @currentUserType <> 2 or @currentUserType is NULL
begin
-- No, retrieve current tracking level
exec GetTrackLevel @userType = @currentUserType, @reqID = @reqID, @email = @trackEmail, @trackLevel = @currentTrackLevel output
-- Is the new user type @C&B?
if @newUserType = 2
begin -- Yes, retrieve new tracking level
exec GetCBLevel @trackLevel = @currentTrackLevel, @reqID = @reqID, @currentTrackLevel = @newTrackLevel output
end
else -- No, retrieve new tracking level
begin
exec GetTrackLevel @userType = @newUserType, @reqID = @reqID, @email = @emailTo, @trackLevel = @newTrackLevel output
end
end
else
begin
-- Yes, retrieve new tracking level
exec GetTrackLevel @userType = @newUserType, @reqID = @reqID, @email = @emailTo, @trackLevel = @newTrackLevel output
-- Retrieve current tracking level
exec GetCBLevel @trackLevel = @newTrackLevel, @reqID = @reqID, @currentTrackLevel = @currentTrackLevel output
end
end
-- Is this event = transfer/completed?
else if @event = 6 or @event = 7 or @event = 10
begin
-- No, any existing entries for exec3?
if (select count(*) from timeLog where trackLevel = 'exec3' and reqID = @reqID) > 0
begin
-- Yes, set current tracking level to cb5
select @currentTrackLevel = 'cb5'
end
-- Any existing entries for exec2?
else if (select count(*) from timeLog where trackLevel = 'exec2' and reqID = @reqID) > 0
begin
-- Yes, set current tracking level to cb4
select @currentTrackLevel = 'cb4'
end
-- Any existing entries for exec1?
else if (select count(*) from timeLog where trackLevel = 'exec1' and reqID = @reqID) > 0
begin
-- Yes, set current tracking level to cb3
select @currentTrackLevel = 'cb3'
end
-- Any existing entries for acct?
else if (select count(*) from timeLog where trackLevel = 'acct' and reqID = @reqID) > 0
begin
-- Yes, set current tracking level to cb2
select @currentTrackLevel = 'cb2'
end
else
begin
-- Set current tracking level to cb1
select @currentTrackLevel = 'cb1'
end
end
-- Calculate hours worked
if @event <> 10
begin
exec CalcBusinessHours @startDateT = @startDateTime, @endDateT = @endDateTime, @totalHours = @trackHours output
-- Update information in the timeLog table
update timeLog
set dateOut = @endDateTime, trackHours = @trackHours
where reqID = @reqID and trackHours = 0 and dateOut = '1990-12-31'
end
end
-- Is this event = email?
if @event = 4 and @newTrackLevel is not NULL
begin
-- Yes, insert new row for new track step
insert into timeLog (reqID, trackLevel, dateIn, trackEmail, trackHours, dateOut)
values (@reqID, @newTrackLevel, @endDateTime, @emailTo, 0, '1990-12-31')
end
-- Is this event = reopen?
else if @event = 10 and @trackEmail is not NULL
begin -- Yes, insert new row for new track step
insert into timeLog (reqID, trackLevel, dateIn, trackEmail, trackHours, dateOut)
values (@reqID, @currentTrackLevel, @endDateTime, @trackEmail, 0, '1990-12-31')
end
endProcedure:
Return @errorValue
View 2 Replies
View Related
May 15, 2008
When importing an .xlsx file the number of columns stops at 255. Does anybody know how to get all columns imported?
Tried saving the file as text and that allows me to import all the columns but it would be much easier to do this directly from Excel.
Thanks
View 4 Replies
View Related
Jul 17, 2007
Hello Everyone,
Is there any way in RS2005 to export to Excel 2007 format ?
The reason I'm asking is that we have a report that can potentially have more than 256 columns but for now, there is no way of directly importing to excel 2003 (.xls).
Is microsoft going to come out with an improvement to RS2005 or is there already a way to export to Excel 2007 to bypass the 256 column limit?
Regards,
Joseph
View 1 Replies
View Related
Feb 28, 2008
Hi Folks,
I have got a quick question, Is it possible to use office 2007 in SSIS, If so what would be the driver?
or Could we use JET 4.0 itself?
Any thoughts and help in this regard would be appreciated.
Zulfi.
View 3 Replies
View Related
May 8, 2007
I am trying to work through a test on database mirroring I am following the whitepaper that Micrososft published on how to configure mirroring and sahrepoint, but when i failover the config database and admin content database it doesnt appear to work. I execute the following commands after both are failed over
----
stsadm.exe -o renameserver -oldservername <OldPrincipalServer> -newservername <NewPrincipalServer>
iisreset
----
It doesnt work it get the following error.
Unable to connect to database. Check database connection information and make sure the database server is running.
When i bring the admin content databse back to the original principle the admin site works great.
What am I missing?
View 3 Replies
View Related
Oct 4, 2007
Help! My network support staff just upgraded my MS Office products from Office 2003 to Office 2007, and now I no longer get the "F5 = Run" option in Microsoft Visual Studio to run any of my SSIS packages that ran just fine yesterday, before the upgrade.
The "Debug" option does not occur in the menu choices across the top of the screen. (They are File, Edit, View, Project, Build, Data, Format, SSIS, Tools, Test, Window, Community, and Help -- no Debug.)
I store my packages in the File System. I can run many of them just fine, even today, with the Execute Package Utility. My problem occurs when I try to run them in Visual Studio.
Even if I make a simple, new package that moves a table from Access 2003 to SQL Server 2005, I see no Debug menu selection option when I am finished with the new package.
I figure it must be something simple -- I just don't know where to find it in the Visual Studio menu.
Most of the packages I am trying to run do not access Office files: they access dBase 5 files (database); they run processes on SQL Server 2005 servers. I realize that I may have to make some adjustments to connections to Access databases, should such databases be upgraded to Office 2007.
Thanks in advance.
Dan
View 9 Replies
View Related
Oct 30, 2007
I am going to compare thie value 2007-9-11 (this value was retrived from the column(TxnDate) in my DataBase, type is DateTime)
I write code
select * from ZT_ModifyLog where Year(TXnDate) = Year(GetDate()) AND ( ( Month(TXnDate) < Month(GetDate()) ) and Month(TXnDate) >= Month(GetDate())-1)
it will like
select * from ZT_ModifyLog where Year(2007-9-11 ) = Year(GetDate()) AND ( ( Month(2007-9-11 ) < Month(GetDate()) ) and Month(2007-9-11 ) >= Month(GetDate())-1)
→ select * from ZT_ModifyLog where TxnDate(2007) = 2007 AND 10 < GetDate(10) and 9 >= 9 so return TXnDate between 2007/9/1~ 2007/9/30
but what if Month(GetDate())-13)?? when the -1 biger than 12... I guess the code will cause error ... but can't think out how to avoid and change my code
pleae help... thank you very much
View 1 Replies
View Related
Jun 12, 2007
Hi Guys,
I am trying to export data from database to excel 2007 file on my machine.
I have downloaded the provider for office 2007 and I have XP with sp2 and SQL server 2005 with SP2.
I havn't installed office 2007 on my machine,but I have a excel file which is created in office 2007.To get acess of read and write i have downloaded office compatibilty pack too,So I can read and write into the file.
Now I am creating one SSIS package to export data into excel file.But I m not able to coause I am getting some errors like
"test connection failed because of an error in intializing provider. Invalid UDl file"
"Test connection is failed because of an error in intializing provider.Not a valid file name".
Please help or suggest how to export data from database to 2007 excel file.
Yogesh V. Desai. | SQLDBA|
View 10 Replies
View Related
Sep 9, 2007
Hi all
I am wondering if there is a solution for our current issue i.e. we can't export the query report from SQL report services into 2007 Excel.
We have no problem with Excel 2003.
Any help/reply would be much appreciated.
Cheers
View 9 Replies
View Related
Feb 6, 2008
Hi, I would really appreciate some help on this one as I know nothing about triggers to be quite honest.
I'm trying to add a feature to my Delphi 2007 application to start a SQL package whenever a load button on my Delphi form is clicked. Assume I'll need SQL code to perform this.
Can anyone please assist in this matter - sample code will also be much appreciated. Thanks a million!
View 1 Replies
View Related
Apr 8, 2008
I converted my database to 2007 version and when I tried to execute VBA Module which adds records from one table to another it showed me a mistake (Type mismatch) Here is the code (it worked on 2003 version). Can anybode help me to fix the error?
Function AddBulletin()
Dim st As String
Dim i As Integer
Dim db As Database
Dim Table1 As Recordset
Dim Table2 As Recordset
DoCmd.OpenTable "Today", acNormal, acEdit
DoCmd.ApplyFilter "", "[Today]![F3] Is Null"
DoCmd.RunCommand acCmdSelectAllRecords
DoCmd.RunCommand acCmdDeleteRecord
DoCmd.Close acTable, "Today"
Set db = DBEngine.Workspaces(0).Databases(0)
Set Table1 = db.OpenRecordset("Today", dbOpenDynaset)
Set Table2 = db.OpenRecordset("BULLETINS", dbOpenDynaset)
The mistake appears on the last two rows.
It's probably easy but I cannot find it.
View 1 Replies
View Related
Aug 10, 2007
Hi,
I wants to import data using DTS package from Excel 2007. I have tried this by using DSN but i'm not getting Excel 2007 types.
Please suggest me how to Connect to Excel 2007 using DTS package to import data.
Thanks!
View 3 Replies
View Related
Aug 13, 2007
Hi
In my matrix cell I have a cell with the following Expression:
=Fields!monthname.Value & " " & Fields!Year.Value
In one of my datasets I have a SELECT CAST(FCYB.cyb_yearname AS int) AS 'Year' ... amongst other things.
Now, how do I make 'Year' to say 07 instead of 2007? What is the proper way to do it? In the expression or in the SQL code?
Thanks in advanced as always
KR
View 3 Replies
View Related