SQL: Get A Maximum Of Items From The Same User
Mar 18, 2008
I want to select the latest photos that were posted on my site from my photos table:
id name usercode createdate
1 holiday 5 1/1/2008
2 holiday2 5 1/1/2008
3 my car 5 1/1/2008
4 new home 7 1/1/2008
5 starry night 8 1/1/2008
6 me again 6 10/10/2007
But in case one user has posted like 400 photos I dont want to show 400 photos of the same user as that would mess up latest photos. So I want to show the latest photos but always with a maximum of 3 for the same user...
So in the above data example pictures with id 1,2,3,4,5 would be shown
How can I achieve this with SQL (and as always: without temp tables :))
Thanks!
View 7 Replies
ADVERTISEMENT
Jul 29, 1999
We have a production server that is configured to 100 user connections.
Without any reason, the maximum connections had been exceeded and users
can no longer access the sql. But if you sp_who , it displayed only
4 user connections. Since, I have an open connection before this error
happens, i was able to execute sp_who. This happened 4 times since we
installed the sql server. the version is 6.50.422 sp5a with hotfix.
To all gurus out there, can you give light into this problem?
Thanks in advance.
View 3 Replies
View Related
Jul 23, 2005
Newbie here.I've got my database set up in SQL 2000, and have started an Access adpfor a front end. I have 10 licenses, and at the moment the onlyaccesses are the server through Remote Desktop and one person into theADP. I started getting ODBC timeout errors when running a complexquery, so I started poking around. In the logs there's messages sayingthe maximum of 10 user connections has been reached, over and overagain. I'm not even certain that these problems are related, but itdoesn't look good.Why are all 10 connections used when there's only the server and oneclient? No one else has access to this server. And how can I stop theODBC timeout? That paticular complex query is the whole jsutificationfor using SQL over Access, so I kind of need it to work. :)Thanks in advance, maddman
View 8 Replies
View Related
Jul 27, 2001
Hi,
Environment:
I have a Sqlserver 6.5 production server used for web based applications
Compaq 5500 4 GIG RAM, 4 processor
Sql Memory config on that server is 1048576 (which is 2048 MB)
and the run value is 640000 (which is 1250 MB).
runvalue for user connections was 500
We have only 90 user connections may increase upto 100 depends on the connections. We don't have any overload on that server.
Error: I was seeing
"unable to connect maximum no. of 500 configured user connections are already connected" in the error log.
Action Taken:
I increased the user connections to 600
and rebooted the server. Immediately the same error I can see in the error log. But we have only 20 user connections at that time. I can able to connect.
Please advise me to get rid of this error.
Thanks,
Anu.
View 3 Replies
View Related
Apr 17, 2007
Hi: I'm try to create a stored procedure where I sum the amounts in an invoice and then store that summed amount in the Invoice record. My attempts at this have been me with the error "The multi-part identifier "items.TAX" could not be bound"Any help at correcting my procedure would be greatly appreciate. Regards,Roger Swetnam ALTER PROCEDURE [dbo].[UpdateInvoiceSummary] @Invoice_ID intAS DECLARE @Amount intBEGIN SELECT Invoice_ID, SUM(Rate * Quantity) AS Amount, SUM(PST) AS TAX FROM InvoiceItems AS items GROUP BY Invoice_ID HAVING (Invoice_ID = @Invoice_ID) Update Invoices SET Amount = items.Amount WHERE Invoice_ID =@Invoice_IDEND
View 3 Replies
View Related
Feb 25, 2015
I am struggling to come up with a set-based solution for this problem (i.e. that doesn't involve loops/cursors) ..A table contains items (identified by an ItemCode) and the set they belong to (identified by a SetId). Here is some sample data:
SetIdItemCode
1A
1B
24
28
26
310
312
410
[code]....
You can see that there are some sets that have the same members:
- 1 and 10
- 2 and 11
- 7, 8 & 9
What I want to do is identify the sets that have the same members, by giving them the same ID in another column called UniqueSetId.
View 8 Replies
View Related
Sep 12, 2015
I have some code I build 2 weeks ago which I’ve been running daily but it’s suddenly stopped working with the following error.
“The table "tbl_Intraday_Tmp" has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes. INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit” When I google this there seems to be a related to tables with vast numbers of columns.
My table tbl_Intraday_tmp is relatively small. It has 7 columns. 1 of varchar(5), 3 of decimal(9,3) and 2 of decimal(18,0). The bit I’m puzzled with is it was working and stopped.
I don’t recall changing anything but I wouldn’t rule that out. I ‘ve inspected the source files and I don’t believe they have changed either.
DECLARE
@FileName varchar(50),
@Path varchar(50),
@SqlCmd varchar(1000)
= '',
@ASXCode varchar(5),
@Offset decimal(18,0),
[code]....
View 5 Replies
View Related
Apr 20, 2012
I am using MS SQL server 2008, and i have a table with 350 columns and when i m trying to create one more column its giving error with below message -
Warning: The table XXX has been created, but its maximum row size exceeds the allowed maximum of 8060 bytes.
INSERT or UPDATE to this table will fail if the resulting row exceeds the size limit.
how can i resolve this?
View 14 Replies
View Related
Apr 10, 2015
I'm having an issue creating a report that can group & sum similar items together (I know in some ways, the requirement doesn't make sense, but it's what the client wants).
I have a table of items (i.e. products). In some cases, items can be components of another item (called "Kits"). In this scenario, we consider the kit itself, the "parent item" and the components within the kit are called "child items". In our Items table, we have a field called "Parent_Item_Id". Records for Child Items contain the Item Id of the parent. So a sample of my database would be the following:
ItemId | Parent_Item_Id | Name | QuantityAvailable
----------------------------------------
1 | NULL | Kit A | 10
2 | 1 | Item 1 | 2
3 | 1 | Item 2 | 3
4 | NULL | Kit B | 4
5 | 4 | Item 3 | 21
6 | NULL | Item 4 | 100
Item's 2 & 3 are child items of "Kit A", Item 5 is a child item of "Kit B" and Item 6 is just a stand alone item.
So, in my report, the client wants to see the SUM of both the kit & its components in a single line, grouped by the parent item. So an example of the report would be the following:
Name | Available Qty
--------------------------
Kit A | 15
Kit B | 25
Item 4 | 100
How I can setup my report to group properly?
View 6 Replies
View Related
Oct 15, 2007
I have created a local user on Report Server Computer and the user has the administrative rights.
When i try to connect Report Server (http://xxx.xxx.xxx.xxx/reportserver) with this user's credantials. (ReportServer directory security is set -only- to Basic Authentication. ).
I get the following error.
Reporting Services Error
--------------------------------------------------------------------------------
The number of requests for "XXXServerXXXUser" has exceeded the maximum number allowed for a single user.
--------------------------------------------------------------------------------
SQL Server Reporting Services
Then i try to login using a different user with administrative rights on the machine, i can logon successfully.
The system is up for a month but this problem occured today?!? What could be the problem?!?
View 2 Replies
View Related
May 12, 2006
I cannot find an easy way to DELETE items which are > 1 time in my table (i am working with MS SQL 2000)
idserialisOk
-------------------
2AAA1
3BBB0
5dfds0
6CCC1
7fdfd 0
8AAA0
9CCC0
I want to DELETE each Row IN
SELECT doublons.serial, Count(doublons.serial) AS 2Times
FROM doublons
GROUP BY doublons.serial
HAVING Count(doublons.serial)>1
and WHERE isOK = 0
in my exemple , after deleting, my table must look like
idserialisOk
-------------------
8AAA1
9CCC1
3BBB0
5dfds0
7fdfd0
thank you for helping
View 10 Replies
View Related
Oct 10, 2005
SQL Server 2000 8.00.760 (SP3)I've been working on a test system and the following UDF worked fine.It runs in the "current" database, and references another database onthe same server called 127-SuperQuote.CREATE FUNCTION fnGetFormattedAddress(@WorkID int)RETURNS varchar(130)ASBEGINDECLARE@Address1 As varchar(50)@ReturnAddress As varchar(130)SELECT@Address1 = [127-SuperQuote].dbo.tblCompany.Address1FROM[Work] INNER JOIN[127-SuperQuote].dbo.tblCompany ON [Work].ClientID =[127-SuperQuote].dbo.tblCompany.CompanyIDWHERE[Work].WorkID = @WorkIDIF @Address1 IS NOT NULLSET @ReturnAddress = @ReturnAddress + @Address1 + CHAR(13)+ CHAR(10)RETURN @ReturnAddressENDSo now the system has gone live and it turns out that the live"SuperQuote" database is on a different server.I've linked the server and changed the function as below, but I get anerror both in QA and when checking Syntax in the UDF builder:The number name 'Zen.SuperQuote.dbo.tblCompany' contains more than themaximum number of prefixes. The maximum is 3.CREATE FUNCTION fnGetFormattedAddress(@WorkID int)RETURNS varchar(130)ASBEGINDECLARE@Address1 As varchar(50)@ReturnAddress As varchar(130)SELECT@Address1 = Zen.SuperQuote.dbo.tblCompany.Address1FROM[Work] INNER JOINZen.SuperQuote.dbo.tblCompany ON [Work].ClientID =Zen.SuperQuote.dbo.tblCompany.CompanyIDWHERE[Work].WorkID = @WorkIDIF @Address1 IS NOT NULLSET @ReturnAddress = @ReturnAddress + @Address1 + CHAR(13)+ CHAR(10)RETURN @ReturnAddressENDHow can I get round this? By the way, I've rather simplified thefunction to ease readability. Also, I haven't posted any DDL because Idon't think that's the problem!ThanksEdward
View 2 Replies
View Related
Dec 7, 2006
This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database)
Help pleaseee
View 3 Replies
View Related
May 22, 2008
Hi,
Please give the T-SQL script for this ? Thanks
Shanth
View 4 Replies
View Related
May 4, 2006
t1
order
item
how can i get the order that has less than 2 items?
View 6 Replies
View Related
Jun 22, 2004
Hi,
I'm trying to include the COUNT(*) value of a sub-query in the results of a parent query. My SQL code is:
SELECT appt.ref, (Case When noteCount > 0 Then 1 Else 0 End) AS notes FROM touchAppointments appt, (SELECT COUNT(*) as noteCount FROM touchNotes WHERE appointment=touchAppointments.ref) note WHERE appt.practitioner=1
This comes up with an error basically saying that 'touchAppointments' isn't valid in the subquery. How can I get this statement to work and return the number of notes that relate to the relevant appointment?
Cheers.
View 6 Replies
View Related
May 13, 2008
Hey everyone,
I'm working on a document management system that will allow the users to tag docs. Would it better in terms of performance and general maintenance to have all the tags comma de-limited in a column of the doc record, or have each tag in a row of an associated table?
Thanks in advance!
View 3 Replies
View Related
Aug 22, 2014
how can run a query that would not list duplicate e.g.
item 1 section 1
item 2 section 1
item 3 section 1
item 4 section 1
item 5 section 2
item 6 section 2
item 7 section 3
the output would be
section 1
section 2
section 3
View 1 Replies
View Related
Oct 3, 2007
how to find which items from a list (without using table ) are not in a specific table
('443',
'470',
'878',
'567',
'430'
)
problem is the following query gives what is in the table
select distinct areacode
from area_code
where areacode
in
('443',
'470',
'878',
'567',
'430'
)
tried using count to see 0 but only get 1 .... N
don't want to create a table everytime ... for dynamic list
TIA
View 1 Replies
View Related
Jun 25, 2007
Hello Experts. You may have more luck at this than me.
I am interested in finding the quantity of items that were ordered alone. I have an orderid field and a product field. So the count of the orderid has to equal one and the have them grouped by product.
Example of how data looks like
I am looking for transactions like orderid 3 and 5.
OrderID
Product
1
hotdog
1
burger
1
taco
2
burrito
2
snack
2
chips
3
burger
4
hotdog
4
burger
4
taco
5
burrito
6
snack
6
chips
When i run
SELECT product, count(orderid)
From Table
Where BusinessDateID = 20060725
group by product
having (count(orderid)=1)
I only get back items that were only sold once.
I am looking for a result that looks like this
Product
Ordered alone
hotdog
2
burger
3
taco
4
burrito
32
snack
12
chips
76
View 7 Replies
View Related
Jul 6, 2006
hi, im trying to get the last row of a column by using this code
cmd.CommandText = "SELECT max(orderID) as orderID from orders where memberNo = '" & Session.Item("memberNum") & "'"but it return me 1 instead which is the smallest value in my orderID column n located in the first rowthen i try to use this code but they say got syntax errorcmd.CommandText = "SELECT max(orderID) as orderID from orders where memberNo = '" & Session.Item("memberNum") & "'" ' order by orderID asc " ' and orderID = '" & Session("ordersID") & "'"
can anyone tell me the right way to write the syntax??
thx in advance
View 2 Replies
View Related
Aug 7, 2002
Does anyone know the specific website that documents the maximum RAM SQL 7.0 Standard and Enterprise edition can handle within Windows 2000 Server and Windows 2000 Advanced server? All help appreciated!!
darius
View 2 Replies
View Related
Oct 24, 2006
Hi , I am trying to write a report generator by simply using a form and then a gridview that query's the database based on what the user selects on the form. Anyways, I update the SQL parameters similar to below code. I just want to know how i can tell the parameter to get ALL values from the parameter instead of a specific value. For example if the user wanted to see ALL the records for CustomerName what would i set the parameter default value to? I tried the asterisk but that did not work. Please guide me....Thanks! MattSqlDataSource1.SelectParameters["CustomerName"].DefaultValue = "some value";<asp:SqlDataSource ... > <SelectParameters> <asp:Parameter Name="CustomerName" /> </SelectParameters></asp:SqlDataSource>
View 1 Replies
View Related
Nov 7, 2006
I need to create a stored procedure that takes a list of product
numbers(541, 456, CE6050,...) and selects only the customers that have
all product numbers in the list. I have a product table that has the
following schema:
rowid numeric(18,0),productNumber numeric(5,0),customerNumber numeric(5,0)
and a customer table:
customerNumber numeric(5,0),address varchar(50),contact varchar(50)
So a customer can have more than one product, but I need a select
statement that takes the product numbers and selects them against the
product table and returns only the customerNumbers that have the entire
list of product numbers. I have tried doing a join on the product list and productNumber, then join with the customer table on customerNumber, but that gets any entires found in the list not the entries that have all the product numbers. Thanks in advance for any help.
View 1 Replies
View Related
Apr 15, 2007
...such as stored procedures, tables etc.
Initially this started as a case of "doh, I should just be using one database here, not two", and I was simply wanting to copy database tables. In VS2K5 I tried as there is a right click menu option of copy when a table is selected but this doesn't work for me with any database object of any kind. So fast forward to the present...I now am attempting to deploy an app to a hosting service, 1&1.com. I am allowed only one database in my current package, which should be fine for now. So I had to combine the ASPNETDB along with 2 other databases. It took a bit of time, but I got everything done, I thought, and posted to the servers. While debugging I get an error saying a stored procedure can not be found. And it indeed is not.This really confuses me as I made the changes in VS2k5, shut down and restarted to make sure I didn't miss anything, then used SQL Server Man. Studio to make a .bak file to upload to my hosting service. It never occurred to me to verify the changes I made in VS2k5 were actually on the database when viewed there. Well, they aren't, and I have no idea why. That would be issue #1 I suppose.So after giving the background info here, what I am looking for help with is how to get the changes I am making in VS2k5 to also be present when viewed from SQL Server Man. Studio as the only means of posting a db to my hosting provider is by using a .bak file.Also, why is it a project template I download has a .mdf file I am not able to even see in SQL Server Man. Studio? I guess if I had this answer the issue would be resolved.TIARegards,Joe
View 9 Replies
View Related
Nov 5, 2007
Hi,I am getting a mysterious error message, and it doesnt say which line it referres to, just gives me a stack trace.Could somone decipher it for me?:System.Data.SqlClient.SqlException: Incorrect syntax near 'items'. [SqlException (0x80131904): Incorrect syntax near 'items'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +180 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +68 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +199 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2411 System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) +190 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +380 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +115 System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +395 System.Web.UI.WebControls.SqlDataSourceView.ExecuteInsert(IDictionary values) +405 System.Web.UI.WebControls.SqlDataSource.Insert() +13 detailproview.Button2_Command(Object sender, CommandEventArgs e) +41 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +75 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +155 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4886 My page code is:private bool ExecuteUpdate(int quantity){ SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "UPDATE Items SET Quantityavailable = @qty WHERE productID=@productID"; command.Parameters.Add("@qty", TextBox1.Text); command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery(); con.Close(); return true;} private bool ExecuteInsert(String quantity) { SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "INSERT INTO Transactions (Usersname)VALUES (@User)"+ "INSERT INTO Transactions (Itemid)VALUES (@productID)"+ "INSERT INTO Transactions (itemname)VALUES (@Itemsname)"+ "INSERT INTO Transactions (Date)VALUES (+DateTime.Now.ToString() +)"+ "INSERT INTO Transactions (Qty)VALUES (@qty)"+ command.Parameters.Add("@User", System.Web.HttpContext.Current.User.Identity.Name); command.Parameters.Add("@Itemsname", labname.Text); command.Parameters.Add("@productID", labid.Text); command.Parameters.Add("@qty", TextBox1.Text); command.ExecuteNonQuery(); con.Close(); return true; }protected void Button2_Click(object sender, EventArgs e){ TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteUpdate(Int32.Parse(TextBox1.Text) );}protected void Button2_Command(object sender, CommandEventArgs e) { if (e.CommandName == "Update") { SqlDataSource1.Insert(); } }}. Thanks!Jon
View 7 Replies
View Related
Mar 24, 2008
hi I Cant delete items in my grid view.. here is my code
"
DeleteCommand="DELETE FROM [aspnet_Membership] WHERE [UserId = @UserId]" SelectCommand="SELECT First, Last, Email, CreateDate, IsApproved, IsLockedOut FROM aspnet_Membership">
when i run it.. and clicked the delete button.. this appears:
Server Error in '/mapuaResearch' Application.
--------------------------------------------------------------------------------
An expression of non-boolean type specified in a context where a condition is expected, near 'UserId = @UserId'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An expression of non-boolean type specified in a context where a condition is expected, near 'UserId = @UserId'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An expression of non-boolean type specified in a context where a condition is expected, near 'UserId = @UserId'.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +95
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +82
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +3430
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +186
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1139
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +334
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +407
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +149
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +493
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDelete(IDictionary keys, IDictionary oldValues) +922
System.Web.UI.DataSourceView.Delete(IDictionary keys, IDictionary oldValues, DataSourceViewOperationCallback callback) +176
System.Web.UI.WebControls.GridView.HandleDelete(GridViewRow row, Int32 rowIndex) +914
System.Web.UI.WebControls.GridView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +1067
System.Web.UI.WebControls.GridView.RaisePostBackEvent(String eventArgument) +215
System.Web.UI.WebControls.GridView.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +31
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +244
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3839
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
PLEASE HELP ME!!!!! TNX
View 2 Replies
View Related
May 9, 2008
I have a database with multiple items each day. I'm looking to extract monthly information from this data. So I'm thinking that I would like to have a drop down list with each available month in the list. How would I extract which months (for multiple years) have data from a datatype = smalldatetime?
I'm using c#
Thanks!
View 9 Replies
View Related
May 9, 2008
I need to create an ordered list of items using a select statement in a stored procedure. All itemsare obtained from a table but the first item in the list has a different value from the others.
View 10 Replies
View Related
May 4, 2004
Hello,
Inside a column I have this result:
Record 1: Sales;Admins
Record 2: ;Sales;Admins
Record 3: Sales;
Record 4: Admins;
You can see the delimiter ";", it can be everywhere.
Now I want to delete "Sales".
Therefor I have to search where the "Sales" is. (records)
After that I want to delete the "Sales".
If I delete it the record may not have 2 or more delimiters after each other, like here:
Record 1: ;Admins (good, better is to remove the delimiter also)
Record 2: ;;Admins (bad)
Record 3: ;(good, better is to remove the delimiter also)
Record 4: Admins;
Can somebody help me how to build this query?
Thanks!
View 7 Replies
View Related
Jun 4, 2001
We are having blocking issues on our server. Recently, I noticed that we no longer have any thing under Current Activity. When I click the plus sign beside it, it shows no items - that is, no process info, locks/process ID, or the locks/object. Does anybody know why and how I can reset it?? Thanks for your help.
View 3 Replies
View Related
Aug 24, 1999
Hi
I had replication set up and working but had to unbind the Pub/Sub and re add. Now on the ditribution task in Executive I am getting the following error
The last distributor job id and the last subscriber job id do not match. No jobs were available with a job id > 2147.
This is SQL Server 6.5 by the way.
Does anyone know what has caused this and what the solution is?
Steve
View 2 Replies
View Related
Nov 2, 2005
I am trying to get a count of how many times a badge is entered in each hour it appears. In other words, I would like to find out how many times badge 3333 comes up in each hour of the day, the same with badge 4532.
The task at hand is to find out productivity for items processed per hour per badge number. I know I will need to take the hour out of timedate using datepart, but the results do not look right. Would anyone have any ideas on this? Thanks!
the table I have looks like this:
IDBadgeOrdNumberTimeDate
6112133333781267941/10/05 9:19
6112084532781275591/10/05 9:21
6111973333781265611/10/05 9:29
6111903333781261671/10/05 9:30
6111774532781253021/10/05 9:38
6111693333781257811/10/05 9:40
View 4 Replies
View Related
