SQL Limit Of Demilted Pipe Characters Passed As Parameter To Sql Query
Nov 16, 2004
I am not sure about the architecture of the Issue Tracker and hence not sure if it applies here. But I will post in any case and wait for users on this forums comments as well.
===========Earlier post==================
This question is regarding the architecture of TimeEntry.
In some programs it builds an arrayList for Master-detail type of relationship and when user is ready to save it by clicking 'submit' it build a variable with pipe delimited fields.
This is then passed to a sql query.
This to me does not seem to be an efficient manner. Because the max character is 1500 chars as parameter to SQL query.
I was wondering if instead I could store it as an XML and then use the XML to import in to SQL.
Any ideas is greatly appreciated, I am running in to problems where my variable construct does increase to more than 1500 chars. Any thoughts are much appreciated in this regards.
Regards,
MillenniumIte.
View 2 Replies
ADVERTISEMENT
Jul 23, 2005
I am new to sql and very familiar with access. I am using a verylarge database(130M records) in ms sql2000 and think I need to frontend it with access for reports and forms, etc..I have some questions:1) Is there a way in SQL to prompt a user for input at the running ofa query like the [what is your name] construct in an access query?2) I can't seem to create calculated fields in a view in sql. Inaccess I put "total:=hours*rate" and a new column would be createdwhich would contain the total.3) I normally would create a form in access from which the accessqueries would pull their variables and then insert those variables inthe queries or reports, etc. How would this be accomplished usingsql.4) Lastly and probably most basic. How does a "real" sql developercreate reports and forms to interact with the enduser? I am usingaccess as a front end, but am open to suggestions.Thanks,Brad
View 1 Replies
View Related
Nov 28, 2005
Hi
i got errro mess "Invalid length parameter passed to the substring function" from this below. Anyone how can give me a hint what cause this, and how i can solve it? if i remove whats whitin thoose [] it works, i dont use [] in the code :)
colums:
VLF_InfectionDestination is nvarchar 254
SELECT TOP 10 tb_AVVirusLog.VLF_VirusName, COUNT(tb_AVVirusLog.VLF_VirusName) AS number
FROM tb_AVVirusLog INNER JOIN
__CustomerMachines002 ON tb_AVVirusLog.CLF_ComputerName = __CustomerMachines002.FalseName
WHERE (CONVERT(varchar, tb_AVVirusLog.CLF_LogGenerationTime, 120) BETWEEN @fyear + @fmonth + @fday AND @tyear + @tmonth + @tday) AND
(__CustomerMachines002.folder_id = @folderId) [OR
(CONVERT(varchar, tb_AVVirusLog.CLF_LogGenerationTime, 120) BETWEEN @fyear + @fmonth + @fday AND @tyear + @tmonth + @tday) AND
(tb_AVVirusLog.VLF_InfectionDestination LIKE N'%@%')]
GROUP BY tb_AVVirusLog.VLF_VirusName
HAVING (NOT (tb_AVVirusLog.VLF_VirusName LIKE N'cookie'))
ORDER BY COUNT(tb_AVVirusLog.VLF_VirusName) DESC
View 7 Replies
View Related
May 23, 2001
I am a newbie to SQL Server.
I have a problem, in filtering the records returned by a query.
I have a table which contains 1 million records, it has a user defined primary key which is of character type.
The problem is i need to filter the output of a select query on the table based on two parameters i send to that query.
The first parameter will be the starting row number and the second one is the ending row number.
I need a procedure to do this.
For Eg:
MyProc_GetRowsFromBigTable(startRowNo,endRowNo) should get me only the rows in the specified range.
Thanks in advance,
Raghavan.S
View 2 Replies
View Related
Nov 21, 2007
Hi,I'm using c# with a tableadapter to call stored procedures. I'm running into a problem where if I have over a certain byte size or number of parameters being passed into my stored proc I get an exception that reads: "Cannot evaluate expression because a thread is stopped at a point where garbage collection is impossible, possibly because the code is optimized." If I remove one parameter, the problem goes away. Has anyone run into this before? Thanks,Mark
View 3 Replies
View Related
Feb 19, 2007
Hello,
since a couple of days I'm fighting with RS 2005 and the Stored Procedure.
I have to display the result of a parameterized query and I created a SP that based in the parameter does something:
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
CREATE PROCEDURE [schema].[spCreateReportTest]
@Name nvarchar(20)= ''
AS
BEGIN
declare @slqSelectQuery nvarchar(MAX);
SET NOCOUNT ON
set @slqSelectQuery = N'SELECT field1,field2,field3 from table'
if (@Name <> '')
begin
set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + ''''
end
EXEC sp_executesql @slqSelectQuery
end
Inside my business Intelligence Project I created:
-the shared data source with the connection String
- a data set :
CommandType = Stored Procedure
Query String = schema.spCreateReportTest
When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.
Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter...
So inside"Layout" tab, I added the parameter: Name
allow blank value is checked and is non-queried
the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!
What is wrong? What I forgot??
Thankx for any help!
Marina B.
View 3 Replies
View Related
Jun 28, 2006
Hello,
Im currently working with a DTS-package used for importing a Excelsheet into SQL-server.
I have a "Microsoft Excel 97-2000" as source and a "Microsoft OLE DB" as destination.
A "Transformation Data Task" is used to shuffle the data.
The package works ok as long as the path for the Excelsheet doesn't exceed 128 characters! Then it gets truncated at 128 characters and of course the data task can't find the file......
I can browse to my excelsheet, and when I look at the path it's ok. But when I close the package and then opens it again the path is truncated at 128 characters. Grrrr.
Is this a set limit in SQL Server or is it something I can mail the databaseadministrator about tomorrow?
View 9 Replies
View Related
Nov 12, 2015
Is there a limit on the number of characters that can be entered in a cell? If so, what is it?
View 2 Replies
View Related
Jul 20, 2006
How could I go about doing the following:
I have a column with lets say
AHA1
AHA2
AHA3
AHE1
AHE2
ARL1
ARL2
How could I make a column next to it that is basically the same but cuts off anything after the third letter? So this new column would look like:
AHA
AHA
AHA
AHE
AHE
ARL
ARL
Thanks!
View 4 Replies
View Related
Jul 30, 2007
Hello,
I have a select statement that looks like this:
SELECT TOP 10 [Id], [Abstract] FROM NewsArticles
Abstract is a TEXT Column. I'd like to limit it to 50 characters... how would I do that.
Thanks,
-- shawn
View 4 Replies
View Related
Jul 23, 2005
Hi, all:I'd heard that the upper row limit in SQL of 6080 bytes may have beenincreased with SP3.Can anyone confirm/deny this? Is this still a 'carved-in-stone' uppercap?Thanks,DW.
View 1 Replies
View Related
Jul 23, 2007
Any one knows for sure if there is any limit on the number of characters/letters that a FLATFILE connection manager can maximally have?
Is the following name (36 letters) valid ?
Code Snippet
<DTS:Property DTS:Name="ObjectName">Load Ready Output Connection Manager</DTS:Property>
View 2 Replies
View Related
Nov 19, 2007
I have tested the following code, and it works for me:
DECLARE @XML XML
SET @XML = '
<DocumentElement>
<data>
<item code="ABCDEFG" quantity="1" sort="0" />
<item code="XCFVGBF" quantity="1" sort="0" />
<item code="ABCDEFG" quantity="10" sort="0" />
</data>
</DocumentElement>'
SELECT SUM(x.qty * ISNULL(p.price_mn,0))
FROM (SELECT [Code] = A.A.value('@code','varchar(20)'),
[Qty] = A.A.value('@quantity','INT')
FROM @xml.nodes('/DocumentElement/data/item') AS A(A)) X
LEFT JOIN productprice_t P ON p.code_id = x.code
The question is, how can I do this if the XML is in a different format & doesn't use any attributes?
So it looks like this (which I'm getting from an ADO.Net datatable using .WriteXML):
<DocumentElement>
<data>
<code>ABCDEFG</mercurycode>
<quantity>1</quantity>
<sort>0</sort>
</data>
<data>
<mercurycode>XCDFEG</mercurycode>
<quantity>2</quantity>
<sort>0</sort>
</data>
<data>
<code>ABCDEFG</mercurycode>
<quantity>10</quantity>
<sort>0</sort>
</data>
</DocumentElement>
View 5 Replies
View Related
Mar 19, 2007
I am quite new to SSRS and am having some difficulties in trying to develop a new report via Business Intelligence Studio based on a stored procedure which requires the input of 1 parameter, and also has an optional parameter which I default to NULL in the sproc.
When I create my dataset I select the given sproc I want and when I attempt to execute it, I am prompted for the parameters the sproc expects.
However, when I enter a value in the dialog for the required Parameter I get a SQL error indicating that the parameter the sproc expects was not supplied. I have profiled the call and see the attempt to execute the sproc, but no parameter value.
Can some one tell me why the value I enter is not being passed to the sproc in my database ? Is there some special syntax that I need to use ?
I have scanned a number of sites & through the books I have and can't find anything on this. From what I have read, when I exec my sproc the parameters get recongnized & I can just enter my values. This doesn't seem to be the case.
Any help and/or suggestions are appreciated !!!
Thanks.
View 8 Replies
View Related
Nov 30, 2007
I have a requirement where, I need to get the value of parameter from a query string of url and use it in my report.
Ex:- http://www.mysite.com?name=bobby
From the above url, I have to take the value of name and be able to use it in my report query or assign to a parameter.
Please let me know, how can I acheive this.
View 1 Replies
View Related
Jan 28, 2008
I have a boolean parameter on my report that the user will enter. Currently, it shows as an option button with True/False beside each option as the words used. Is it possible to have a check box instead of an option button for the user instead?
Thanks in advance!
View 3 Replies
View Related
Oct 18, 2006
I am trying to pass multiple values as parameters into my update command:UPDATE tblUserDetails SET DeploymentNameID = 102 WHERE ((EmployeeNumber IN (@selectedusersparam)));I develop my parameter (@selectedusersparam) using the following subroutine: Private Sub btnAddUsersToDeployment_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAddUsersToDeployment.ClickDim iVal As Integer = 0Dim SelectedCollection As StringSelectedCollection = ""If (lsbUsersAvail.Items).Count > 1 ThenFor iVal = 0 To lsbUsersAvail.Items.Count - 1If lsbUsersAvail.Items(iVal).Selected = True ThenSelectedCollection = SelectedCollection & "," & lsbUsersAvail.Items(iVal).ValueEnd IfNextSelectedCollection = Mid(SelectedCollection, 2, Len(SelectedCollection))Session.Item("SelectedCollectionSession") = SelectedCollectionSqlDataSource4.Update()ltlUsersMessage.Text = String.Empty 'UPDATE tblUserDetails SET DeploymentNameID = @DeploymentNameIDparam WHERE (EmployeeNumber IN (@selectedusersparam))'SqlDataSource4.UpdateCommand = "UPDATE tblUserDetails SET DeploymentNameID = @DeploymentNameIDparam WHERE (EmployeeNumber IN (" + SelectedCollection + ")"ElseltlUsersMessage.Text = "Select users before adding to deployment. Hold Control for multiselect"End IfEnd SubFor some reason the query does not pass the parameters which are "21077679,22648722,22652940,21080617" into the queryI don't understand why.
View 4 Replies
View Related
Apr 9, 2008
I am using two drop downs, like so:
<asp:DropDownList ID="ChurchStateDrop" runat="server" DataSourceID="ChurchStateDropData" DataTextField="State" DataValueField="State" AutoPostBack="True" onselectedindexchanged="ChurchStateDrop_SelectedIndexChanged" AppendDataBoundItems="True"> <asp:ListItem Value="?????" Selected="True" Text="All States" /></asp:DropDownList>
<asp:DropDownList ID="ChurchCityDrop" runat="server" DataSourceID="ChurchCityDropData" DataTextField="City" DataValueField="City" AutoPostBack="True" onselectedindexchanged="ChurchCityDrop_SelectedIndexChanged" AppendDataBoundItems="True"> <asp:ListItem Value="?????" Selected="True" Text="All Cities" /></asp:DropDownList>
I have ????? in the value fields because I don't know what value needs to be passed to negate filtering (to choose all). The Dropdowns have the following SQLDatasources:<asp:SqlDataSource ID="ChurchStateDropData" runat="server" ConnectionString="<%$ ConnectionStrings:tceDatabaseOnlineSQLConnection %>" SelectCommand="SELECT DISTINCT [State] FROM [ChurchView]" DataSourceMode="DataReader"></asp:SqlDataSource>
<asp:SqlDataSource ID="ChurchCityDropData" runat="server" ConnectionString="<%$ ConnectionStrings:tceDatabaseOnlineSQLConnection %>" SelectCommand="SELECT DISTINCT [City] FROM [ChurchView] WHERE ([State] = @State)" DataSourceMode="DataReader"> <SelectParameters> <asp:ControlParameter ControlID="ChurchStateDrop" Name="State" PropertyName="SelectedValue" Type="String" /> </SelectParameters></asp:SqlDataSource>
Now, lets say I wanted to pass a value to the WHERE statement in ChurchCityDropData to coincide with 'All States', what would I replace value="??????" with? Now you may think I'm crazy to do such a thing, but this actually has to do with adding a Denomination Dropdown to show Denominations from all states or all cities. I will figure out the best logic for that later, I just want to know the wildcard to pass to the parameter to choose all states (negate filtering).
View 3 Replies
View Related
Jun 4, 2007
I have the follwoing stored procedure:ALTER procedure [dbo].[up_GetExecutionContext](@ExecutionGUID int = null) asbeginset nocount ondeclare@s varchar(500)declare @i intset @s = ''select @s = @s + EventType + ','-- Dynamically build the list ofeventsfrom(select distinct top 100 percent [event] as EventTypefrom dbo.PackageStepwhere (@ExecutionGUID is null or PackageStep.packagerunid =@ExecutionGUID)order by 1) as xset @i = len(@s)select case @iwhen 500 then left(@s, @i - 3) + '...'-- If string is too long thenterminate with '...'else left(@s, @i - 1) -- else just remove the final commaend as 'Context'set nocount offend --procedureGOWhen I run this and pass in a value of NULL, things work fine. When Ipass in an actual value (i.e. 15198), I get the following message:Invalid length parameter passed to the SUBSTRING function.There is no SUBSTRING being used anywhere in the query and thedatatypes look okay to me.Any suggestions would be greatly appreciated.Thanks!!
View 2 Replies
View Related
Jul 30, 2007
Hi all,
I'd think this is possible but I'm having trouble getting data returned from the query. Fields PART_NUMBER and INTERNAL_SKU exist in the SKU table. This will be inside a SP. If user passes 'PN' as first parameter then I'd need to have the WHERE clause by PART_NUMBER, if he passes 'SK' (or anything else for now) then the WHERE clause shold be by SKU.
Can't I just build the WHERE by replacing @SearchField with its value ? I've looked up the CASE statement but I don't think it does what I need.
DECLARE @strSearchType varchar(2)
DECLARE @strSearchValue varchar(15)
DECLARE @SearchField varchar(15)
set @strSearchType = 'PN'
set @strSearchValue = '1234567'
IF @strSearchType = 'PN'
begin
set @SearchField = 'PART_NUMBER'
end
ELSE
begin
set @SearchField = 'INTERNAL_SKU'
end
SELECT
SKU as 'SKU',
PART_NUMBER as 'PartNumber',
DESCRIPTION as 'Description'
FROM SKUs
WHERE @SearchField = @strSearchValue
FOR XML PATH('SKU'), ROOT('Response')
Thanks,
ST
View 4 Replies
View Related
Mar 1, 2007
I have a SP that inserts data into a table with an identity column I want to get that id and use it in my response.redirect however I keep getting 0 back instead of the identity. Relevent Sql 2005 Declare @NEWEMPID int --after an insert happens in sqlSet @NEWEMPID= SCOPE_IDENTITY()--last thing in my sqlReturn @NEWEMPID Or I tried NEWEMPID as an output parameter VB.Net Dim retValParam As New SqlParameter("@NEWEMPID", SqlDbType.Int) retValParam.Direction = ParameterDirection.ReturnValue'execute the sqldatasource insert command
sqlEmpNewEmp.Insert()
Dim EmpIDVar As Integer = Convert.ToInt32(retValParam.Value) Response.Redirect("http://www.mysite.com?EMPID=" + Server.HtmlEncode(EmpIDVar)) sqlEmpNewEmp.InsertParameters.Clear()
View 8 Replies
View Related
Aug 13, 2007
Hi there when i tried to execute the following query in sql server
select au_fname,
SUBSTRING(P1.au_lname, CHARINDEX('/', P1.au_lname) + 1,
CHARINDEX('=', P1.au_lname, 1)-3)AS [Full Name]
from authors as P1
i will get the error like
"Invalid length parameter passed to the substring function."
If i remove -3 from there it works fine...
Please can anyone clarify this issue.
Thank You.
pavan
View 3 Replies
View Related
May 27, 2015
I have a requirement to show the parent value which is passed and also all the leaf member details in MDX. For example in Adventure works, if I pass Bikes as the value in MDX, the results should display Bikes along with All the child member names as a measure value in SSAS MDX. I only have one hierarchy with Product Category-> Subcategory-> Product.
Â
I am trying to use the following MDX but I am getting all the members. I need to get only Bikes in my report.
Â
WITH MEMBER [Prod_Passed] AS SETTOSTR(AXIS(1))
MEMBER [Prod_Child] AS DESCENDANTS ([Dim Product].[Hierarchy].CURRENTMEMBER,,LEAVES).item(0).NAME
MEMBER [Child_Value] AS ([Dim Product].[Hierarchy].CURRENTMEMBER,[Measures].[Sales Amount])
SELECT [Dim Product].[Hierarchy].[Product Category].&[1] * [Dim Product].[Product Key].[Product Key].MEMBERS ON ROWS,
{[Measures].[Sales Amount],[Prod_Passed],[Prod_Child],[Child_Value]} ON COLUMNS FROM
[AdvWorks]
View 10 Replies
View Related
Nov 12, 2004
Does anyone know what the above error message means?
View 4 Replies
View Related
Oct 7, 2014
How can I compute the biweekly periods when a date is passed in as a parameter, for example if the user enters 9/12/2014 I should get:
Friday /2nd half9/12/2014
Saturday9/13/2014
Sunday9/14/2014
Monday9/15/2014
Tuesday9/16/2014
Wednesday9/17/2014
Thursday9/18/2014
Friday/1st half 9/19/2014
Friday/2nd half9/19/2014
Saturday9/20/2014
Sunday9/21/2014
Monday9/22/2014
Tuesday9/23/2014
Wednesday 9/24/2014
Thursday9/25/2014
Friday/1st half 9/26/2014
View 2 Replies
View Related
Mar 3, 2014
I have a sql job which will execute the below stored proc.
Basically it Refresh the data by truncating the tables and using BCP to import the data. Job was running fine but today got a error message.
Invalid length parameter passed to the substring function. [SQLSTATE 42000] (Error 536). The step failed.
USE [database]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE Procedure [dbo].[Refresh_tables]
[Code] ......
View 2 Replies
View Related
Feb 1, 2008
Hi,
I was trying to execute the following query.
select substring(ISNULL(CAST(FullAdress AS NVARCHAR(MAX)),''),1,charindex(',',ISNULL(CAST(FullAdress AS NVARCHAR(MAX)),''))-1) from tbl_lrf_company_details_with_codes
but i am getting the error as "Invalid length parameter passed to the SUBSTRING function."
Please advice
Thanks In advance
View 4 Replies
View Related
May 27, 2008
SELECT
C.Description,
SUBSTRING (
(CONVERT (VARCHAR (255), D.CurrentXmlValue)), --expression
(CHARINDEX ('>', CONVERT (VARCHAR (255), D.CurrentXmlValue)) + 1), --start
( (LEN (CONVERT (VARCHAR (255), D.CurrentXmlValue))) -
(CHARINDEX ('>', CONVERT (VARCHAR (255), D.CurrentXmlValue))*2) - 1
)--length
) AS Version
FROM
:
:
WHERE
:
:
This does not work while
:
:
--SUBSTRING (
(CONVERT (VARCHAR (255), D.CurrentXmlValue)) as expression, --expression
(CHARINDEX ('>', CONVERT (VARCHAR (255), D.CurrentXmlValue)) + 1) as start, --start
( (LEN (CONVERT (VARCHAR (255), D.CurrentXmlValue))) -
(CHARINDEX ('>', CONVERT (VARCHAR (255), D.CurrentXmlValue))*2) - 1
) as length --length
--) AS Version
:
:
works!!
I get
Msg 536, Level 16, State 5, Line 2
Invalid length parameter passed to the SUBSTRING function.
Error.
Any idea why i am getting this??
I am trying to get rid of xml tags in the column.
Thanks,
View 4 Replies
View Related
Sep 29, 2015
Currently i am using SQL Server 2012 Import/Export Wizard to upload data to sql tables manually. However i was trying to write a procedure to update that table. and on the time of execution, if i can pass excel. Is there any way to pass excel to stored procedure parameter?
View 1 Replies
View Related
Dec 1, 2015
is it possible to identify which value is causing me the above error message and how to resolve it,These are for British postcodes.
create table #tmp (postcode varchar(200) NULL)
insert into #tmp values ('NULL')
insert into #tmp values ('-')
insert into #tmp values ('.')
insert into #tmp values ('0L6 7TP')
insert into #tmp values ('AB10 1WP')
insert into #tmp values ('AB51 5HH')
[code]...
This is the main query
select postcode,LEFT([Postcode], CHARINDEX(' ',[Postcode]) - 1)
from #tmp
order by Postcode
drop table #tmp
View 4 Replies
View Related
Sep 28, 2007
Hi,
I am using a simple procedure to pivot results (found in another forum and adapted it). It is done on SQL Server 2005 server with all service packs. Procedure:
**************
ALTER Procedure [dbo].[EthnicityPivot] @StDate as Datetime, @EndDate as Datetime
as
begin
DECLARE @Teams varchar(2000)
truncate table ForEthnicPivot
INSERT INTO ForEthnicPivot
SELECT DISTINCT COUNT(ID), Team, Ethnicity
FROM dbo._EthnicityByTeamEpisode
where Startdate between @StDate and @EndDate
GROUP BY Ethnicity, Team
SET @Teams = ''
--// Get a list of the pivot columns that are important to you.
SELECT @Teams = @Teams + '[' + Team + '],'
FROM (SELECT Distinct Team FROM ForEthnicPivot) Team
--// Remove the trailing comma
SET @Teams = LEFT(@Teams, LEN(@Teams)-1)
--// Now execute the Select with the PIVOT and dynamically add the list
--// of dates for the columns
EXEC( 'SELECT * FROM ForEthnicPivot PIVOT (SUM(countID) FOR Team IN (' + @Teams + ')) AS X' )
end
************
I can call the function:
exec EthnicityPivot '01/01/2007','09/09/2007'
and it works fine in SQL analyzer, but when I want to use it in Visual Studio in a new report I am getting this error
message:
There is an error in the query. Invalid length parameter passed to the SUBSTRING function. Incorrect syntax near ')'.
Anyone had similar error and sorted it?
Cheers
Polda
View 4 Replies
View Related
May 28, 2015
I have a procedure that calls a SVF to convert an xmldocument. The ultimate purpose is to update the xml in a column in a multi-million row table. The xml is stored as varchar(MAX), it was supposed to carry any type of text, initially at least.
My question is: why is the xml-parsing performed inside the function much slower when i pass the xmldocument as type xml than when it is passed as varchar(MAX) and the CAST to xml is within the function? Does processing the xml input parameter in SlowFunction involve expensive crossing of some context border?
The two versions of the SVF (they return the rowcount in this simplified example):
CREATE FUNCTION [dbo].[FastFunction]
(
@inDetaljerText varchar(MAX)
)
RETURNS int
[Code] ....
The two versions of the SP
CREATE PROCEDURE [dbo].[FastProcedure]
AS
BEGIN
SET NOCOUNT ON;
select
dbo.FastFunction(al.Detaljer)
[Code] ....
View 2 Replies
View Related
Oct 9, 2006
Hi,
I am new at sql 2000 and 2005, I have created a package in 2005 which I am trying to execute on a daily bases by creating a job. At first because of security issues the job would not execute. Hence, I had to create a credential and a proxy to run the job with sa account. Now it is giving me this error,
€œSQLServer Error: 536, Invalid length parameter passed to the SUBSTRING function. €œ
Through research I have no clue as what I need to do, or where to look.
The package runs without error when I execute the package itself.
Any help is greatly appreciated.
Thanks,
Lori
View 1 Replies
View Related
