I get this error in my Agent after starten to synchronise.
I see the access mdb been created and then deleted and renamed to
name_old.mdb
Do you have some help?
Richard
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies View RelatedHello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies View RelatedDuring testing, the log for tempdb filled up.
That caused the replication agents to get an error and stop.
Is there an easy way to have the agents wait a minute or 2 then try to restart?
Thanks
John
I have setup a replication and after 24 hours this are the error messages I have got:Last action; The database 'supersite' on server 'solomon' does not exist. Full error message: Could not locate entry in sysdatabases for database 'superiste'. No entry found with that name.Make sure that the name is entered correctly. Can anyone out there help me out?
View 1 Replies View RelatedWhat does this error message mean ?
The process could not bulk copy out of table '[dbo].[syncobj_0x3732313945323046]'.
I ran transaction replication successfully last night. Then it was scheduled to run again in the morning, but failed .... any ideas ?
SQL2K SP2
Hello,
We are consistently getting the error message below on our subscribers that have blob images. Is there a way to increase a setting to avoid SQL to throw this error, or another suggestion? Thanks in advance.
John
Error messages:
The replication agent has not logged a progress message in 10 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Distributor are still active.
18 -BcpBatchSize 100000
18 -ChangesPerHistory 100
18 -DestThreads 2
18 -DownloadGenerationsPerBatch 5
18 -DownloadReadChangesPerBatch 100
18 -DownloadWriteChangesPerBatch 100
18 -FastRowCount 1
18 -HistoryVerboseLevel 3
18 -KeepAliveMessageInterval 300
18 -LoginTimeout 15
18 -MaxBcpThreads 2
18 -MaxDownloadChanges 0
18 -MaxUploadChanges 0
18 -MetadataRetentionCleanup 1
18 -NumDeadlockRetries 5
18 -PollingInterval 60
18 -QueryTimeout 400
18 -SrcThreads 2
18 -StartQueueTimeout 0
18 -UploadGenerationsPerBatch 3
18 -UploadReadChangesPerBatch 100
18 -UploadWriteChangesPerBatch 100
18 -Validate 0
18 -ValidateInterval 60
Due to the memory leak issue with respect to replicating blobbed images we have changed UploadGenerationsPerBatch to = 3.
We just moved source server to newer, bigger box ... Windows 2003 and Active Directory ... Snapshot agent worked but distribution failed ... Same login as on older machine, login is sysadm, used DCOMCNFG to allow ability to launch process ... What are we missing?
View 4 Replies View RelatedHi.. I tried to setup MSSQL2000 trans replicatiom using push subscription method. My Publisher is also my distributor. But whenever I started the dstribution agent, I got the following error. It has problem connecting to subscriber's DB with the following error. I had tried that the login is 100% fine. But why this error appear ? Any help?
The name ' ' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted.
(Source: Subsriber (Data source); Error number: 128)
I have few databases with SAME database structure in
SQL Server 2000 in different locations. Data will be
updated in different places with different sets of
data. Basically, i need to synchronize the data
especially to the headquarters database periodically
(may be everyday at night).
DB : SQL Server 2000
OS : Both are running on Windows XP for testing
purposes.
Situation : Now i have 2 database from 2 different
estates. Now, need to be synched into 1.
Have 2 publisher namely TH1, TH2
1 subscriber : THFinal
I've created 2 individual publications using "Create
Publication" and published database namely TH1 and
TH2.
Publication type : Merge publication
Default table article properties setting are as
follows :
a. When merging from different sources : "Treate
changes to the same column as a conflict (changes to
different columns in the same row will be merged)".
Snapshot
i Choose "DELETE DATA IN THE EXISTING TABLE that
matches the ROW FILTER statement".
Resolver :
I checked "yes" for - Allow Subscribers to resolve
conflicts interactively during on-demand
synchronizations".
Now, when i sync the TH1, all the records from TH1
goes to the subscriber database "THFinal".
When i sync the TH2, all the records which was
synched earlier (from TH1) being DELETED. and all
the records from TH2 goes to the subscriber database
"THFinal".
Basically, i WANT to retain the ALL THE data from in
"THFinal" which came from TH1 database since the
primary key is different. Also, all the database
contains running no (Identity increment = 1) .
Identity : Yes (Not For Replication) (Identit seed=1)
===================================================
PROBLEM : 1ST (TH1) database can be synched. when
I try to replicate the 2nd (TH2) database, the
following ERROR displayed : The process could not
drop one or more tables because the tables are being
used by other publications.
The process could not drop one or more tables because
the tables are being used by other publications.
(Source: Merge Replication Provider (Agent); Error
number: -2147200976)
Thanks in Advance
Reagards
Ihsan
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
We are running Reporting Services 2008 R2 on a Windows Server 2008 Standard 64-Bit server. I have a user that has full access to Reporting Services at all folder levels but IS NOT a local administrator on the 2008 server.
This user can create data source connections but when he tries to test the connection by clicking on the 'Test Connection' button, he gets the following error "The permissions granted to user <username> are insufficient for performing this operation.A user that has administrator priveleges on the server can test the connection fine.
I don't want to make this user an administrator on the server.
This is an extract from the log file:
ibrary!ReportServer_0-24!3478!08/16/2011-13:45:37:: Call to TestConnectForDataSourceDefinitionAction().
library!ReportServer_0-24!3478!08/16/2011-13:45:37:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: , Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user <username>
are insufficient for performing this operation.;
[code]....
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
I have a really odd one here. We have a production server which is running SQL 2000 Enterprise Edition SP3. It has a number of databases which are backed up nightly. Last night all of the back-up jobs failed with the following error: -
Msg 913, Sev 16: Could not find database ID ##. Database may not be activated yet or may be in transition. [SQLSTATE 42000]
The databases are in good shape - no issues to report. When I run the Agent Job code within a Query Analyser session it works fine.
When I try and re-start the back-up from the Agent Job it continues to fail with the same error.
Any ideas?
Hi all,
View 4 Replies View Relatedwhere can i find it?
thanks
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
i hope you can help me with issue.
Thanks in advance.
Hello, I get the following error when I run my package interactively. From the logs written out by the driver, it appears that all is working well as far as connecting to the data source and pulling data. It seems as if this error occurs when the DataReader source tries to process the received data.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Error: 0xC0047062 at Data Flow Task, DataReader Source [1]: System.Data.Odbc.OdbcException: ERROR [42000] XML parse error at 162:1338: not well-formed (invalid token)
at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode)
at System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method, Boolean needReader, Object[] methodArguments, SQL_API odbcApiMethod)
at System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method, Boolean needReader)
at System.Data.Odbc.OdbcCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Odbc.OdbcCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PreExecute()
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPreExecute(IDTSManagedComponentWrapper90 wrapper)
Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "DataReader Source" (1) failed the pre-execute phase and returned error code 0x80131937.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (691)" wrote 0 rows.
Task failed: Data Flow Task
SSIS package "MyPackage.dtsx" finished: Success.
I am not sure where to look next. Any help is much appreciated.
Dave
Hi,
I am trying to install "Microsoft SQL Server 2005 Express Edition" through VS2005 Setup but it is always failing to install. I am presenting here log file information.I appriciate if any one help me on this..I have marked all failed message with red color
--------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Wed Dec 20 15:04:57 2006
Machine : DATLA
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_2.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_2.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_2.log
--------------------------------------------------------------------------------
Machine : DATLA
Product : SQL Server Database Services
Error : Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 111 (The file name is too long.
)
--------------------------------------------------------------------------------
Machine : DATLA
Product : SQL Server Database Services
Error : Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 111 (The file name is too long.
)
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQL.log
Last Action : InstallFinalize
Error String : Failed to set registry settings for server network libraries. The action is SetDefaults. The error is 111 (The file name is too long.
Error Number : 29530
--------------------------------------------------------------------------------
Machine : DATLA
Product : Microsoft SQL Server 2005 Tools Express Edition
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Tools.log
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.
Time : Wed Dec 20 15:19:47 2006
List of log files:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Core(Local).log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SqlWriter_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLSupport_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQLNCLI_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_MSXML6_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SQL.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Tools.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Datastore.xml
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_.NET Framework 2.0.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SNAC.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Core.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_Support.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_DATLA_SCC.log
---------------------------------------------------------------------------------------------------------------
Thanks in Advance.
HI ,
This is a problem I encountered when I had to detach a database file (type .mdf):
1) I went to the MS SQL Management Server Studi and detached my database file successfully from a connection called Workhorse.
2) I needed to place the .mdf database file into a zip file in order to put it on a remote server. I did this using Shared Portal. This was also successful
3) However when I tried reattaching the database file, I got this error:
CREATE FILE encountered operating system error 5A(Access denied.) while attempting to open or create the physical file "CProgram FilesMSSQL ServerMSSQLData<databasename>.mdf'
Q) The database file and log file (ldf) exist in the correct directory so I don't know what happened. Can any one help?
Thanks much
Tonante
Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
Hello there,
I recently started having trouble with my local SQL Server 8.0 database server. When I try to start it with Enterprise Manager I get the following error:
An error 5 - (Access is denied) occured while performing this service operation on the MSSQLServer service.
Nothing showed up in the SQL Server error logs. If I try to connect to it using the SQL Server Management Studio that came with SQL Server 2005 I get the following (slightly more informative) message:
Cannot connect to (local) ... (provider: Named Pipes Provider, error 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
I'm not sure which log to look at in the MSSQL folders: MSSQL.1, MSSQL.2 or MSSQL.3.
Furthermore, if I manually start the MSSQLSERVER service, then I can connect just fine with the SQL Server 2005 Management Studio but still get the weird error message with SQL Server 8.0 Enterprise Manager.
Any ideas?
Thanks
Hello everyone.
I am trying to install Project Server, and i'm having issues with sharepoint, and connecting to SQL:
dataserver is running sbs2003 sql2003 and analsys services.
server2 is running server2003 is to be the application server for project.
ProjectDb is the database that i have setup in sql.
username is the account that can control everything as administrer.
in Sharepoint is asks for the database server: <<dataserver>>
SQL Server database name: <<ProjectDb>>
I'm using windoes authentication and then i click ok, and get the error message.
I've also see the error message can not find the SQL Server, and access denied. Under ODBC i have installed the sql server information under System DSN.
Any help would be great.
Thanks
Everett Buel
Hi,
I'm writing a stored procedure and when I click on the Check Syntax button its giving me the error in the subject. I'm not really sure whats wrong with this. Here is my Stored Procedure code. Any help wud be appreciated.
CREATE PROC CabsSchedule_Insert
{
@JulianDatesmallint,
@SiteCodesmallint,
@CalendarDaysmallint,
@BillPeriodsmallint,
@WorkDaysmallint,
@CalDayBillRcvd varchar(30),
@Remarksvarchar(50)
}
AS
INSERT INTO CabsSchedule
(JulianDate, SiteCode, CalendarDay, BillPeriod, WorkDay, CalDayBillRcvd, Remarks)
VALUES
(@JulianDate, @SiteCode, @CalendarDay, @BillPeriod, @WorkDay, @CalDayBillRcvd, @Remarks)
Thanks,
hi ,
i am trying for a drill through report (rdlc)
ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like
An error has occurred during report processing.
A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".
the code is
using System;
using System.Data;
using System.Data.SqlClient;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
//using Microsoft.ApplicationBlocks.Data;
using Microsoft.Reporting.WebForms;
using DAC;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
ReportViewer1.Visible = false;
}
protected void Button1_Click(object sender, EventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
DataSet ds = new DataSet();
ds = obj.get_order();
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";
ReportViewer1.LocalReport.Refresh();
ReportViewer1.Visible = true;
}
protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
ReportParameterInfoCollection DrillThroughValues =
e.Report.GetParameters();
foreach (ReportParameterInfo d in DrillThroughValues)
{
Label1.Text = d.Values[0].ToString().Trim();
}
LocalReport localreport = (LocalReport)e.Report;
string order_id = Label1.Text;
DataSet ds = new DataSet();
ds = obj.get_orderdetail(order_id);
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");
ReportViewer1.LocalReport.Refresh();
}
}
the code in method get_orderdetail(order_id) is
public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.
Hi,I am getting the following error (When i am trying to update the column thru windows service) Please let me know the solution for the following.The following error is comming only when i set CommandTimeout to infinity (Commandtimeout=0).General network error. Check your network documentation. Number 11 Procedure ConnectionRead (recv()). Class 20 State 0 Source .Net SqlClient Data Provider Server Line number 0 Thanks and Best RegardsNagaraju A
View 2 Replies View Related
When creating a replication publisher in the live server enviroment, the repicaltion displays an error saying
Could not obatin information about Windows NT group/user '........', error code 0x6e. (Microsoft SQL Server, Error: 15404)
When looking at the replication server, the error report says that the user is a System administrator on the Live Server but they do not exist on the replication server.
Why would this cause an error?
I appreciate your answer
Thanks
JC
Hi all,
I have created alert to give me information for a backup that was done and since I don't have SQL Mail set up on my servers I use sp_SQLSMTPMAIL using a smtp server. The Alert is kicking off a job called EMAIL DBA which have the code below:
exec master.dbo.sp_sqlsmtpmail @vcTo = 'lwilliams@uhc.com', @vcBody = '
Error: [A-ERR]
Severity: [A-SEV]
Date: [STRTDT]
Time: [STRTTM]
Database: [A-DBN]
Message: [A-MSG]
Check the [SRVR] SQL Server ErrorLog and the Application event log on the server for additional details'
This uses the Agent Token which is very powerful.
The error I get on this job is:
Executed as user: NT AUTHORITYSYSTEM. Line 8: Incorrect syntax near ''. [SQLSTATE 42000] (Error 170). The step failed.
If you look at the code there is no '', so am I missing something or could this error come from the sp_SQLSMTPMAIL.
Please help thanks
Lystra
Hi all
is any one aware what this error means. one of my server restart every now and then(application issue). when server restart following message appears for SQL Agent not in error log.
what is the reason behind
Message
[425] delay_between_response attribute (10 sec) of alert (9) is less than poll interval for this alert (20 sec)
Hello,
When i try to stop or Start SQLServer Agent I get the
following error:
" An Error 1060(the specified service does now exist as an installed service)
occured while performing this service operation on the SQLServerAgent service "
I use SQL Server 7.0 on windows 2000.
Does anyone have a solution to this problem.
Thank you,
Ran
hi, I am doing the following: I am testing the email or the pager for an operator under ms sql server agen. when I click test, it ask me to confirm test pager address I clik oK,then get a message that the mail was sent successfully then I get an error message then sql server enterprise close.
any idea what is going on
Ahmed
Anyone seen this in 7.0 SQL:
The 'SQLAgentCmdExec' proxy account does not exist or has an incorrect password. I am not running a proxy.