How do I remove the first 5 characters from a column?
I have a list of id's - 9999925173 9999924037 9999924063 9999924053 9999924053 0 0 9999924053 9999924049 9999924037 9999944659 9999924053 0 9999924032 9999924037 9999924053
For some reason, we add a 99999 to our ID's and in order to compare to the customers data, I need to remove the 99999 (if they exist) from the column. How would I do that? LEN?
Hi all, I have a stored procedure that generates the following SQL WHERE clause UserName LIKE 'Adi234%' AND Fname LIKE 'David%' AND LName LIKE 'Justin%' AND It is good except that it i can not remove the last AND which is not neccessary at the end of the clause. I want to remove the last AND that come up at the end, my code places AND after each data field(UserName, Fname, Lname) .
Hi I have a table with a few hundred emailadresses. How can I delete all quotes (') from the addresses, so that 'email@email.com' is replaced as email@email.com. Thank you zipfeli
I have built a SSIS package that reads in data from a SQL Server 2005 source database into a flat file destination. The Row Delimiter is {CR}{LF}. The Column Delimiter is Tab {t}.
The data being read from the SQL Server database contains both {CR}{LF} and Tab {t} characters in various fields on several rows.
How can I process the input data from the SQL Server to remove these characters before passing it to the destination output file?
Sorry if this is obvious to all, but I am only just starting with SSIS...
I need to be able to prevent an invalid character from being entered into a sql 2000 databae on import from oracle.
In short, I need to exclude a certain character from being entered and need to be able to send an email which specifies that an attempt was made to enter this character, if the change was due to an insert or an update, the row to be affected in the target database, date and time info. Also the source of the data.
If this is not possible, is it viable to remove the character after insert and still send the email with the required info?
Hi, I am populating a dataset in .net with output from sql 2005 database. One of the columns in the table is a 'varchar(max)' type. This dataset is then converted to XML using WriteXml and written to a .xml document. But due to the presence of invalid characters, this process errors out. Is there any way using which these invalid characters can be replaced at the database level itself when querying on the table? The error that is produced is as follows: '', hexadecimal value 0x1C, is an invalid character. Line 32201, position 924.
When we are getting data in a table and we want to replace characters with other characters. For example, We have a table with a street address, and there are numerous ascii character values we want to review and replace if they exist. We were looking at using a table with 2 columns, 1 containing each ascii character value the other it's preferred replacement value. Then updating the street address searching through each ascii character and replacing it if needed. Currently, we are running it through a looping process searching each individual address for each ascii character, and updating it.
I have a table that is riddled with weird characters. So far I have found an escape character for PDF files and a trademark sign. These characters are crashing my SSIS packages. I am able to remove these characters with an update script...
Update TABLE set LEAD_NOTES__C = Replace(LEAD_NOTES__C, nchar(65533) COLLATE Latin1_General_BIN2, '!');
Update TABLE set LEAD_NOTES__C = Replace(LEAD_NOTES__C, nchar(1671) COLLATE Latin1_General_BIN2, '!');
This works fine, but my question is...
I would like to write a script that removes all foreign characters with the exception of the normal characters like (@,#,$,%,etc). I need a dynamic process that handles this so I am not losing time sifting through over 20,000 rows of data and changing my update script to remove a specific column. Although this method works, I would prefer a dynamic query. I intend to wrap this in a stored procedure that loops through all columns in a table (as parameter).
Hi to all, I am having a string like (234) 522-4342. i have to remove the non numeric characters from the above string. Please help me in this regards. Thanks in advance. M.ArulMani
Hi to all, I am having a string like (234) 522-4342. i have to remove the non numeric characters from the above string. Please help me in this regards. Thanks in advance. M.ArulMani
I have an Address column that I need to Substring. I want to remove part of the string after either, or both of the following characters i.e ',' OR '*'
Example Record 1. Elland **REQUIRES BOOKING IN*** Example Record 2. Theale, Nr Reading, Berkshire Example Record 3. Stockport
How do I achieve this in a CASE Statement?
The following two case statements return the correct results, but I some how need to combine them into a single Statement?
,LEFT(Address ,CASE WHEN CHARINDEX(',',Address) =0 THEN LEN(Address ) ELSE CHARINDEX(',' ,Address ) -1 END) AS 'Town Test'
,LEFT(Address ,CASE WHEN CHARINDEX('*',Address ) =0 THEN LEN(Address) ELSE CHARINDEX('*' ,Address ) -1 END) AS 'Town Test2'
I'm presented with a problem where I have a database table which must be migrated via a "custom tool", moving the data into a new table which has special character requirements that didn't exist in the source database. My data resides in an SQL Server 2008R2 instance.
I envision a one-time query which will loop through selected records and replace the offending characters with --, however I'm having trouble understanding how this works.
There are roughly 2500 records which meet the criteria of "contains bad characters", frequently containing multiple separate bad chars, and the table contains roughly 100000 rows.
Special Characters are defined as #%&*:<>?/{}|~ and ..
While the field is called "Filename" it isn't always so, it is a parent/child table where foldernames are also stored.
The examples I'm finding are all oriented around SELECT statements, to change the output of what I see returned, however I'd rather just fix the entire column using an UPDATE. Initial testing using REPLACE fails because I don't always have a single character as the bad thing in a string.
In a better solution, I found an example using a User Defined Function to modify the output of a select, but I cannot use that UDF in an UPDATE.
My alternative is to learn enough C# to modify the "migration tool" to do this in-transit, but I know even less about C# than I do of SQL.
I gather I want to use @@ROWCOUNT to loop through the rows but I really can't put it all together in a cohesive way.
In my application I must store over 16000 character in a sql table field . When I split into more than 1 field it gives "unclosed quotation mark" message. How can I store over 16000 characters to sql table field (only one field) with language specific characters?
I tried to remove AdventureWorksDB in the "Add or Remove Programs" of Contol Panel and I got the following errors: (1) AdventureWorksDB Error 1326: Error getting file security: CProgram FilesMicrosoft SQL ServerMSSQL1MSSQLGetLastError: 5. |OK| and (2) Add or Remove Programs Fatal Error during installation (after I clicked the |OK| button). Please help and tell me how I can solve this problem.
I have uninstalled the CTP version of the SQL Server express so that I can install the released version but CTP version is still listed in the add/remove program list but without the change/remove button. I have been to different sites to find information on cleaning this up and I have ran all the uninstall tool I can find but the problem still prevails. I cannot install the released version without completely getting rid of the CTP version. Please help anyone.
Hi everybody, I would like to know if there is any property in sql2000 database to separate lowercase characters from uppercase characters. I mean not to take the values €˜child€™ and €˜Child€™ as to be the same. We are transferring our ingres database into sqlserver. In ingres we have these values but we consider them as different values. Can we have it in sqlserver too?
I am having a hard time removing my SQL instance inside the Add/Remove program. After i select the SQL Instance name and then I tried to remove it but it won't allow me to delete it. There isn't any error message or whatsoever. Actually, when i try to log it in my SQL Management studio, that certain sql instance name is not existing according to the message box. Is there any way to remove the Sql Instance in my system?
We are trying to build a FAQ in a SQL database that will be updateble trough the web.
Now to the questione: We can't use more than 255 characters, in Books Online it says that char and varchar supports 1 to 8000 characters but it doesn't work for us.
I have a field oh phone numbers that had no specific format. I have removed all of the previous formatting so know there are just a string of 10 numbers and I want them all to change to "(###) ###-####". Is there an SQL statement that I can use to update the field in a batch process. Any help would be great. I also have linked the tables to an access db, if that makes it easier. Any help is much appreciated.