SQL Running Totals And Subtractions
Apr 8, 2008
I have a table for which I need a “special� running total. More specifically there should be a close communication between the credit and the debit column. The scenario should be in the following order
“Credit�“Debit�“Balance credit�“Balance debit�
6 0 6 0
5 0 11 0
0 4 7 0
0 9 0 2
3 0 1 0
0 5 0 4
0 2 0 6
I have to point out that this is done in a grouped form, where the CustormerID is the grouped clause. Now I have achieved this to a point where the calculations work only if the credit column is bigger than 0, but when the account starts with debit I get only sums of the column not the needed subtractions. What am I missing? Thanks in advance.
DECLARE @PrevRunBal MONEY --Overall running total
SET @PrevRunBal = 0
DECLARE @PrevGrpBal MONEY --Running total resets when account changes
SET @PrevGrpBal = 0
DECLARE @PrevRunCnt INT --Overall running count (ordinal rank)
SET @PrevRunCnt = 0
DECLARE @PrevGrpCnt INT --Running count resets when account changes
SET @PrevGrpCnt = 0
DECLARE @PrevAcctID INT --The "anchor" and "account change detector"
SET @PrevAcctID = 0
changes
SET @PrevGrpBalP = 0
update Temp
SET --===== Running Total
@PrevRunBal = RunBal = @PrevRunBal + dolguva,
-- @iznos =RunBal= dolguva - pobaruva + @sdol -@spob,
--===== Grouped Running Total (Reset when account changes)
@PrevGrpBal = Bcredit = CASE
WHEN CustomerID = @PrevAcctID
THEN CASE
WHEN CREDIt > DEBIT or CREDIT = 0
THEN (@PrevGrpBal+CREDIT)-(DEBIT)
WHEN DEBIT>CREDIT or DEBIT =0
THEN (@PrevGrpBal+DEBIT)-DEBIt
END
ELSE CASE
WHEN CREDIT >DEBIT
THEN (CREDIT)
WHEN DEBIT > CREDIT
THEN DEBIT -- restarts from 0 if only 1 rec.
END
END,
--===== Running Count (Ordinal Rank)
@PrevRunCnt = RunCnt = @PrevRunCnt + 1,
--===== Grouped Running Total (Ordinal Rank, Reset when account changes)
@PrevGrpCnt = GrpCnt = CASE
WHEN CustomerID = @PrevAcctID
THEN @PrevGrpCnt + 1
ELSE 1 -- Restarts count at "1"
END,
--===== "Anchor" and provides for "account change detection"
@PrevAcctID = CustomerID
Apologies if I'm posting in a wrong forum
Nik
View 2 Replies
ADVERTISEMENT
Oct 1, 1999
I have a situation where I want to get running totals of a potentionally very large table. Say I have a million records with a table with few fields.
Table structure like this
UID value
1 3
2 9
3 4
4 7
5 2
I want to return a result set of something like this
select uid, value, (rtotal???) from table
uid value rtotal
1 3 3
2 9 12
3 4 16
4 7 23
5 2 25
This is to be used for sort of a lotery. Say I have 1 million users with a variety of points tward the lotery. I total the points, is say 5 million, determined
the winner to be say 3,234,563 Now I have to determine which uid is the winner. So I planned to to do a running total till the winning value
is less then or equal to the running total and I have my winner. I am looking for a fast way to do this on a large database.
Any Ideas?
View 1 Replies
View Related
Jan 12, 2004
Hi Folks,
I have a problem that I know that i should be able to code up but have drawn a blank due to it being monday. Anyway......
Have a table :
create table test_registrations
(
date_maint smalldatetime,
user_name1 varchar (255),
user_address1 varchar (255),
total_users int
)
go
If i have a number of registrations on a particular date then I can tell all how many users have registered in any date by :
select date_maint , count (1)
from test_registrations
group by date_maint
order by date_maint desc
go
The qestion is how can I keep a total registared users count. Say if I have 10 users join on the 1st of Jan and 15 on the 3rd then I want
the total users for the users on 1st to read 10 and total users on the 3rd to read 25.
I know i should be able to code this up but I'm being a dumb ass. Can someone show me a way to code it. Is it some sort of correlated sub query to keep a running total ?
View 3 Replies
View Related
May 23, 2008
On SQL Server 2005 at least, this works efficiently where we have an indexed row number.
It does seem to be very sensitive to the join condition in the recursive part of the CTE: changing it to the equivalent "ON T.rn - 1 = RT.rn" results in a scan of T each time instead of a seek!
DROP TABLE dbo.T
-- rn must have contiguous values for this to work:
CREATE TABLE dbo.T (rn int PRIMARY KEY, f float NOT NULL)
-- 100000 random floats between 0 and 1:
INSERT INTO dbo.T
SELECT n+1 AS rn, RAND(CAST(NEWID() AS binary(4))) AS f
FROM dbo.Numbers
GO
;WITH RT AS (
SELECT rn, f AS rt
FROM dbo.T
WHERE rn = 1
UNION ALL
SELECT T.rn, RT.rt + T.f
FROM RT
INNER JOIN dbo.T AS T
ON T.rn = RT.rn + 1
)
SELECT *
INTO dbo.TRT
FROM RT
--ORDER BY rn
OPTION (MAXRECURSION 0)
SQL Server parse and compile time:
CPU time = 0 ms, elapsed time = 1 ms.
Table 'Worktable'. Scan count 2, logical reads 600001, physical reads 0,
read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0.
Table 'T'. Scan count 100000, logical reads 200002, physical reads 0,
read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0.
SQL Server Execution Times:
CPU time = 3500 ms, elapsed time = 3724 ms.
(100000 row(s) affected)
View 4 Replies
View Related
Jun 11, 2008
Now my code below brings everything i want it too, the problems comes is I need to get a running total of sales for each day. Currently it shows the sales for a store for each day and what there projections should be. I need a running total for each day so if you were to have todays date it would have the sum(sales) between today and the first or the month that im in. but still show what the total was on the 10th, 9th, and so on.
Declare @Brand as varchar(10)
DECLARE @StartDate datetime
Declare @EndDAte as Datetime
Set @Brand = 'business'
SELECT @StartDate=CAST('1/1/'+CAST(YEAR(GETDATE()) AS varchar(4)) AS datetime)
SET @EndDate =CAST('12/31/'+CAST(YEAR(GETDATE()) AS varchar(4)) AS datetime)
Select ttProjection.StoreID,S.StoreName , ttProjection.DailyProjection, ttProjection.DAYS, ISNULL(ttSales.Sales,0) as Sales
From
/**********Finds projection per day****************/
(Select StoreID, Projection, Projection/Cast(DaysInMonth as INT) as DailyProjection, DAYS
From
(Select StoreID, Projection as Projection,
Month, Day(DateAdd(m, 1,DateAdd(d,1 - Day(Month), Month))-1) As DaysInMonth
From Reporting.dbo.RetailSalesComparison_ProjectionsView
Where StoreID between 12000 and 12999
)ttTemp
Right Join
(SELECT DATEADD(dd,number,@StartDate) as DAYS
FROM
(
select number from master..spt_values
WHERE type='p'
union all
select number+256 from master..spt_values
WHERE type='p'
) as s
where DATEADD(dd,number,@StartDate)<=@EndDate)ttDays on Month(ttTemp.Month) = Month(ttDays.DAYS))ttProjection
Left Join
(Select Date, StoreID, Sum(Sales) as Sales
From Reporting.dbo.RetailSales_byStore_byDay
Group By Date, StoreID)ttSales
on ttProjection.StoreID = ttSales.StoreID
and ttProjection.DAYS = ttSales.Date
Inner Join DelSolNet2.dbo.Store S on ttProjection.StoreID = S.StoreID
Where Month(Days) = Month(getdate())
Order By Days, ttProjection.StoreID
View 3 Replies
View Related
Jan 19, 2007
We are trying to create a report that shows a Week to Date, Month to Date, and Year to Date
Week to Date Month to Date Year to Date
Item Number
I've tried using an if statement (if date = current week, Qty, 0) and then sum the data but I get an error message that reportitems can only be summed in the page header and footer. I've also tried running totals, but it doesn't like the iif statement. Any ideas on how to do this?
Nancy
View 6 Replies
View Related
Apr 22, 2008
Hi There,
I have the following query:
SELECT NATNLACCT, IDCUST, TEXTSNAM, AMTBALDUEH
FROM
VIEW_ARCUS
where amtbaldueh != .000
order by NATNLACCT
but i want to display the data something similar as below. How do I create a column to display with the natinlacct name(I have many) concatenated to Total and then sum amtbaldueh?
Natinlacct idcust textsnam amtbaldueh
Doda 1234 abcd $101
Doda 5678 efgh $200
Doda 9876 ijkl $300
Doda Total $601
Nava 5847 jhgf $230
Nava 5487 lfde $130
Nava 3587 lrsd $100
Nava Total $460
Thanks
Rhonda
View 5 Replies
View Related
Apr 8, 2008
I have a table for which I need a €œspecial€? running total. More specifically there should be a close communication between the credit and the debit column. The scenario should be in the following order
Credit
Debit
Balance credit
Balance debit
6
0
6
0
5
0
11
0
0
4
7
0
0
9
0
2
3
0
1
0
0
5
0
4
0
2
0
6
I have to point out that this is done in a grouped way where the CustormerID is the grouped clause. Now I have achieved this to a point where the calculations work only if the credit column is bigger than 0, but when the account starts with debit I get only sums of the column not the needed subtractions. What am I missing? Thanks in advance.
DECLARE @PrevRunBal MONEY --Overall running total
SET @PrevRunBal = 0
DECLARE @PrevGrpBal MONEY --Running total resets when account changes
SET @PrevGrpBal = 0
DECLARE @PrevRunCnt INT --Overall running count (ordinal rank)
SET @PrevRunCnt = 0
DECLARE @PrevGrpCnt INT --Running count resets when account changes
SET @PrevGrpCnt = 0
DECLARE @PrevAcctID INT --The "anchor" and "account change detector"
SET @PrevAcctID = 0
changes
SET @PrevGrpBalP = 0
update Temp
SET --===== Running Total
@PrevRunBal = RunBal = @PrevRunBal + Credit,
--===== Grouped Running Total (Reset when account changes)
@PrevGrpBal = Bcredit = CASE
WHEN CustomerID = @PrevAcctID
THEN CASE
WHEN CREDIt > DEBIT or CREDIT = 0
THEN (@PrevGrpBal+CREDIT)-(DEBIT)
WHEN DEBIT>CREDIT or DEBIT =0
THEN (@PrevGrpBal+DEBIT)-DEBIt
END
ELSE CASE
WHEN CREDIT >DEBIT
THEN (CREDIT)
WHEN DEBIT > CREDIT
THEN DEBIT -- restarts from 0 if only 1 rec.
END
END,
--===== Running Count (Ordinal Rank)
@PrevRunCnt = RunCnt = @PrevRunCnt + 1,
--===== Grouped Running Total (Ordinal Rank, Reset when account changes)
@PrevGrpCnt = GrpCnt = CASE
WHEN CustomerID = @PrevAcctID
THEN @PrevGrpCnt + 1
ELSE 1 -- Restarts count at "1"
END,
--===== "Anchor" and provides for "account change detection"
@PrevAcctID = CustomerID
View 13 Replies
View Related
Jul 8, 2013
I'm trying to adapt a formula for running totals to my Query, have some difficulties in declaring the tables correctly.
Formula: SELECT Ordinal, QTY, QTY+COALESCE((SELECT SUM(QTY)
FROM Table b
WHERE b.Ordinal < a.Ordinal),0) AS RunningTotal
FROM Table a
ORDER BY Ordinal
Now my Table is rather lengthy and is described by this query:
Select X.Ord, X.QTY
From (Select.... )X
Now in order to adapt the formula for running totals I did:Select X.Ord, X.QTY, X.QTY+COALESCE((SELECT SUM(X.QTY)
FROM X b
WHERE b.Ord < a.Ord),0) as RunningTotal
From (Select....)X a
Order by X.Ord
It gives my an ncorrect syntax error near a. I guess I miss the (double) declaration of the Table.
View 4 Replies
View Related
Jul 13, 2006
Hi I have a table with the following structure:
UserID__DateJoined
I want to produce a query that shows on a month/year bases the number of users joined for each month AND show a running total of membership, I'm almost there....just got a problem getting the running totals:
this is what I have so far:
SELECT DATEPART(MONTH, DateJoined) AS Month, DATEPART(YEAR, DateJoined) AS Year, COUNT(UserID) AS NuAccounts
FROM Accounts_Users
GROUP BY DATEPART(MONTH, DateJoined), DATEPART(YEAR, DateJoined)
ORDER BY DATEPART(YEAR, DateJoined), DATEPART(MONTH, DateJoined)
How do I produce a column that shows the running total of accounts?
thanks for any help
View 6 Replies
View Related
Sep 14, 2015
I have a ms-sql 2012 for this task. I read that running totals / sum over is better supported here.
There are customers with an account where they can insert or withdraw cash. When they insert, the inserted amount will get a date where it expires. After the expiration date, the cash becomes unavailable.
I'm not sure how to design the tables to meet my needs, but this is my best guess. And below is the first problem in the view.
Table: deposit    This table will hold all deposits
customerId    (string)
balanceType    (string)
transactionDate   (date)Â
expiresOnDate   (date)
amount     (decimal)
transactionText   (string)
The data set for the deposit table could be:
1 Bonus 01-05-2015 30-04-2016  500  Inserted 500
2 Bonus 01-05-2015 30-04-2016  500  Inserted 500
3Â Bonus2Â 01-01-2015Â 31-12-2015Â Â 100Â Â Inserted 100
2Â Bonus2Â 01-01-2015Â 31-12-2015Â Â 100Â Â Inserted 100
Table: withdrawal  This table will hold all withdrawals
customerId    (string)
balanceType    (string)
transactionDate   (date)Â
amount     (decimal)
transactionText   (string)
The data set for the withdrawal table could be:
2Â Bonus2Â 01-04-2015Â -100Â Â Needed 100
2Â Bonus2Â 02-04-2015Â -100Â Â Needed 100
2Â Bonus2Â 03-01-2015Â -100Â Â Needed 100
3Â Bonus2Â 10-04-2015Â -50Â Â Â Took out 50
3Â Bonus2Â 11-04-2015Â -100Â Â Took out 100
[Code] .....
Now I need to combine the two tables in a view with a running total, ordered by customerId, balanceType and transactionDate
customerId
balanceType
transactionDate
amount
Total
Text
The view must show this, when selecting all records:
1 Bonus 01-05-2015 500  500  Inserted 500
1 Bonus 01-07-2015 -100 400  Yes, got 100
1 Bonus 02-07-2015 -100 300  Yes, got 100
1 Bonus 03-07-2015 -100 200  Yes, got 100
[Code] ....
And a last view that will show distinct totals for each customer and balanceType
customerId
balanceType
totalBalance
1 Bonus -200
2 Bonus -300
2Â Bonus2Â -200
3Â Bonus2Â -550
View 8 Replies
View Related
May 28, 2015
A while back, a "quirky update" method was proposed for lightning fast running totals based on the three-part MSSQL UPDATE's SET statement and tally tables. However, some claimed this was not 100% absolutely guaranteed behavior.
How does the new OVER clause compare in terms of performance ?
DECLARE @Tbl TABLE
(
pk int not null primary key identity,
N int
)
INSERT INTO @Tbl (N) SELECT TOP 1000 1 FROM syscolumns a CROSS JOIN syscolumns b
SELECT pk, SUM(pk) OVER (ORDER BY pk )
FROM @Tbl
View 9 Replies
View Related
May 13, 2015
get the desired results for the following sample data set. I was able to come up with a query that returns the the expected results however only for a given day, so I'd need to union several select statements the get the desired results which is definitely not ideal. I'd like to pass a parameter in (number of days) instead of doing a unions for each select.
DECLARE @T TABLE (Id INT, Category VARCHAR(1), [Date] DATE)
INSERT INTO @T
SELECT 1 AS Id, 'A' AS Category, '2015-5-13' AS ActivationDate UNION ALL
SELECT 1, 'A', NULL UNION ALL
SELECT 1, 'A', '2015-5-13' UNION ALL
SELECT 1, 'A', NULL UNION ALL
[code]....
View 9 Replies
View Related
Sep 23, 2015
I have table named #t1 and three columns. CODE, Column1, and Column2.
create table #t1 (
CODE NVARCHAR(20),
COLUMN1 NUMERIC(18,2),
COLUMN2 NUMERIC(18,2)
)
And i have some data:
INSERT INTO #t1 (CODE,COLUMN1,COLUMN2)
VALUES ('432', 0,100),
('TOTAL FOR 432',0,100),
('4320001',0,250),
('4320001',50,0),
('4320001',0,140),
('4320001',300,0),
('TOTAL FOR 4320001',350,390),
('432002',200,0),
('432002',0,100),
('TOTAL FOR 432002',200,100)
drop table #t1
I want to have 4 column (named BALANCE). Balance must be column that represent running totals between two columns (Column1 - Column2) for each group of data. For each group total must start from zero.after total 432 it starts to count again for total 4320001 and again for total 432002. I'm using MS SQL SERVER 2014.
View 9 Replies
View Related
Mar 9, 2006
I've created a Report Builder Column chart with months as the x-axis
(category) and revenue as the y-axis (value). This correctly displays
the revenue for each month, but I'd like to display a running total of
the revenue for the year.
I'm currently displaying:
Jan $2
Feb $1
Mar $4
I want to display:
Jan $2
Feb $3
Mar $7
I know this is possibly using the RunningTotal formula in Reporting
Services, but I'd like to do this in Report Builder so the users can
change and create their own graphs with running totals. Is there a way to do this in Report Builder?
Thanks.
View 1 Replies
View Related
Nov 28, 2012
I have a sales tables which looks as below.
DEPARTMENT
Barnd_Name
Item_Group
   S_DATE
     S_AMOUNT
Administration
IBM
[code]....
Now i need Month Wise Running Totals.but i should check the following group as show below i that order
1) DEPARTMENT
1) Brand
3) Item Group
4) Month
View 12 Replies
View Related
Apr 24, 2008
Hi,
I have a table with say 10 rows. How can I sum up the first 10 rows and subtract that total from the 10th row value?
Rows 1-9 have a specific value in the dataset and row 10 has a different value so I can distinguish the rows. However I can figure out the expression I should add to the table footer?
I am trying this...
=sum(iif(Fields!recordType.Value<>1,Fields!Month1.Value,0))-sum(iif(Fields!recordType.Value=1,Fields!Month1.Value,0))
So I am saying, if the row has a "recordType" value of something other than 1 then sum it and then subtract any value where the "recordType" is equal to 1.
But I just get am "#error" on the report footer when I run it.
Any help?
Thanks
View 1 Replies
View Related
May 9, 2015
I have some data grouped in a table by a certain criteria, and for each group it is computed a subtotal for the group. Of the values from each of the group, I want to create a grand total on the report by adding every subtotal from each group.
Example:
...
....
Group1 Â Â Â Â Â Â Â Value
              10
              20
Sub Total 1: Â Â Â Â 30
Group2 Â Â Â Â Â Â Â Â Value
               15
               25
Sub Total 2: Â Â Â Â Â 40
Now, I would like to be able to add subtotal 1 (30) to subtotal 2 (40) and my grand total would be 70. Can I accomplish this task in SSRS?
View 5 Replies
View Related
Oct 2, 2006
I have been providing sales data for a few months now from a table that is set up like this:
Date WorkDay GasSales EquipmentSales
9/1/2006 1 100.00 200.00
9/4/2006 2 50.00 45.00
etc.
As can be seen, the data is daily, i.e., on the first workday of September we sold one hundred dollars in gas and two hundred dollars in equipment. On the second workday of September we sold fifty dollars in gas and forty-five dollars in equipment.
Now, however, the data I have to pull from is cumulative. So, using the last table as an example it would look like this:
Date_WorkDay_GasSales_EquipmentSales
9/1/2006 1 100.00 200.00
9/4/2006 2 150.00 245.00
etc.
To make things more complicated, the powers that be wanted this data presented in this fashion:
Total Sales:
1_2_etc.
300.00 95.00 etc.
So, I have been doing a pivot on a CRT to get the data to look like I want. The code is like this:
with SalesCTE (Month, WorkDay, [Total Sales])
as
(
SELECT
datename(month, cag.date),
cag.WorkDay AS [Work Day],
sum(cag.sales_gas + cag.sales_hgs) AS [Total Sales]
FROM CAG INNER JOIN
Branch ON CAG.[Oracle Branch] = Branch.OracleBranch
group by cag.date, cag.WorkDay
)
select * from SalesCTE
pivot
(
sum([Total Sales])
for WorkDay
in ([1],[2],[3],[4],[5],,[7],,[9],[10],[11],[12],[13],[14],[15],[16],[17],[18],[19],[20],[21],[22],[23])
) as p
So, my question is:
How do I get the data to give back daily totals instead of the cumulative amounts for each workday? If the query was a simple one, I'd do something like
select [1] as [Day 1], [2]-[1] as [Day 2], [3]-[2] as [Day 3], etc.
but the query is far from normal, with the CRT and the pivot. I can't seem to get it to work how I'd like.
Any advice/answers? Thanks in advance!!!
P.S. I don't know how to get it to quit with the freakin' smileys.... I suppose you can figure out what my code is really supposed to look like above. Needless to say, it doesn't include a devil face and a damn music note...
View 12 Replies
View Related
Feb 22, 2004
I am using a web page to enter records into a table that tracks production on machine parts.
I get two recordsets and loop through them using vbscript to get the totals.
I use two because I first get all production data greater than the last date an event occurred. The second I get the totals for the day of because I have to back out shifts of production prior to the event, the day of the event (ie 3 shift per day, 3rd shift begins the day so a day looks like this 3, 1, 2. We do an event on shift 1. I have to back out shift 3 as it happened prior to 1. Once I have the two seperate totals I then write a record in the historical data table with the event, shift, production totals, etc.
My question is can I get the production totals from within SQL or is looping through the rs's in vb better?
the vb for the shift is similar to this
If last_event_shift = 1 then
DayProd = shift1prod + shift2prod
elseif last_event_shift = 2 then
DayProd = shift2prod
elseif last_event_shift = 3 then
DayProd = shift1prod + shift2prod + shift3prod
else
end if
TotProd = DayProd + GreaterProd
Here is the SQL for each rs
Data Greater than last date
Select Sum(Production)AS TotProd, dbo.Production.LineNum, EventType
From dbo.Production INNER JOIN dbo.EventDate ON dbo.Production.LineNum = dbo.EventDate.LineNum AND dbo.Production.EntryDate > dbo.EventDate.EntryDate
Where dbo.EventDate.LineNum = @Line
Group By dbo.Production.LineNum, dbo.EventDate.EventType
Data for the last date
Select Max(dbo.EventDate.ShiftRemoved) AS RemovedShift, dbo.EventDate.Set_Pos, Max(dbo.EventDate.CutOff)AS CutOff, dbo.EventDate.EntryDate, Sum(Production)AS TotProd, dbo.Production.LineNum, EventType, Shift
From dbo.Production INNER JOIN dbo.EventDate ON dbo.Production.LineNum = dbo.EventDate.LineNum AND dbo.Production.EntryDate = dbo.EventDate.EntryDate
Where dbo.EventDate.LineNum = @Line
Group By dbo.Production.LineNum, dbo.EventDate.EventType, Shift, dbo.EventDate.EntryDate, dbo.EventDate.Set_Pos
Thanks in advance,
Lee
View 2 Replies
View Related
Mar 16, 2007
Hello All,
I have done a report that shows all the subtotals however, I want to show the grand total (the sum of each subtotal) in a row. I am using SQL server BI studio-2005. I know I can add a row but all the rows are detailed rows and subsequenlty reflect the subtotals for last record in the report. All I need to know what type of row do I need to add to show my totals.
Thanks,
Rashi
View 3 Replies
View Related
Feb 4, 2002
This is probably a simple task but I just don't know how to do it. I need to return a recordset of details with a row of totals for selected columns. Something with a result like this:
Location Attendance Showings
======== ========== ========
JOHNS 210 3
SEREN 116 2
total 326 5
I know I could do this with a stored procedure, but I'd prefer to do it with just one sql statement. I tried compute but because I have a total on more than one column, the returned recordset is actually 3 rows.
Thanks in advance for any suggestions.
View 2 Replies
View Related
May 27, 2002
--Select Capital_Amount + Interest_Amount + Insurance_Amount + Admin_Fee
--from Loan Where loan_no = '9110001AA667'
--Select top 3* from loan
Select sum(Capital_Amount) As Capital_Amount from Sales
Select * from Sales
How can l run these two Queries in the same view. l want to display what l have in the salesNew View and at the same time sum all the amount columns.But l'm not
being successful. Is it achievable or l have to have two separate views?
CREATE View SalesNew
AS
SELECT DISTINCT
tr.Transaction_Date,
tr.Loan_No,
n.Store,
n.User_Issued,
n.LoanBook As Company,
p.Product,
n.Capital_Amount,
n.Interest_Amount,
n.Insurance_Amount,
n.Admin_Fee,
n.Total_Amount
FROM Transaction_Record tr
INNER JOIN Loan n
ON tr.loan_No = n.loan_No AND tr.loan_No = n.loan_No
INNER JOIN Product p ON n.product = p.product
--2nd query
Select n.loanbook As Company,Sum(n.Capital_Amount) As Capital_Amount,
Sum(n.Interest_Amount) As Interest_Amount,
Sum(n.Insurance_Amount) As Insurance_Amount,
Sum(n.Admin_Fee) As Admin_Fee,
Sum(n.Total_Amount) As Total_Amount
From Loan n
Group By n.loanBook with RollUp
View 2 Replies
View Related
Nov 14, 2006
I am relatively new to SQL i.e. I know the basics!
What I am trying to do is: I have a database of customer spend and I am trying to segment them into certain %ages of the search results. So, for example, find all of the customers that are in the top 10% of spenders (I also want to only select customers with a spend of greater than x!). I am trying to do this using a Case When but feel that I may be out of my depth.
Please help if you can!!
Thanks, Kris
View 4 Replies
View Related
Jul 17, 2007
Hi,
I use the following query in my stats page to find the unique visitors and the pages they visited per day in a given month.
SELECT
CONVERT(CHAR(10),LogDate,103) As Date_,
Count(DISTINCT LogRemote_Addr) As Visitors,
Count(Lid) As Pages
FROM Log
WHERE LogMonth=7
Group by CONVERT(CHAR(10),LogDate,103)
ORDER BY CONVERT(CHAR(10),LogDate,103)
I would like to have the totals (Sum) of the "Visitors" and "Pages" also for the given month.
I think I have to use a subquery to accomplish that but I can't figure it out. I would appreciate your help.
Thanks,
Deni
www.tabletennis.gr
View 9 Replies
View Related
Aug 25, 2006
I have a tblTax. It has fields InvoiceNum, TaxAuthority, TaxableTotal,NonTaxableTotal, TaxCollected.Sample data1,county,10.00,0.00,0.401,city,10.00,0.00,0.102,state,0.00,15.00,0.15When totaling invoice 1 should have totals of 10.00,0.00,0.50 becausethe 10.00 is the total for the invoice, but 0.50 is the total taxcollected. I nee these totals in a report. In crystal reports i couldjust do a total on change of invoice number for the Taxable andnonTaxable Totals. but i have to this on an Access adp. I was hoping icould get a query to return something likeinv,auth,Taxable,nonTaxable,Collected,TaxableTot,N onTaxableTot,CollectedTot1,county,10.00,0.00,0.40,10.00,0.00,0.501,city,10.00,0.00,0.10,10.00,0.00,0.502,state,0.00,15.00,0.15,0.00,15.00,0.15I'm not sure how to do a group by that would allow this, although imsure its possible.
View 3 Replies
View Related
Dec 29, 2006
Hi,Am using robvolks crosstab-procedure to generate a crosstab query.I get this result:Total A B Cjuli 455 1 107 347okt 83 1 9 73aug 612 1 113 498juni 451 1 108 342So I get a total for each month. But I would also like a total of eachletterTotal A B Cjuli 455 1 107 347okt 83 1 9 73aug 612 1 113 498juni 451 1 108 342Total 1601 4 337 1260Is that possible?/jim---call to procedureexecute crosstab 'select DATENAME(month,(theDate)) as '' '', count(*) as'MonthsTotal'' from tblData group byDATENAME(month,(theDate))','count(letter)','letter ','tblData'-----------Robvolks procedure----CREATE PROCEDURE crosstab@select varchar(8000),@sumfunc varchar(100),@pivot varchar(100),@table varchar(100),@where varchar(1000)='1=1'ASDECLARE @sql varchar(8000), @delim varchar(1)SET NOCOUNT ONSET ANSI_WARNINGS OFFSET LANGUAGE DanishEXEC ('SELECT ' + @pivot + ' AS pivot INTO ##pivot FROM ' + @table + ' WHERE1=2')EXEC ('INSERT INTO ##pivot SELECT DISTINCT ' + @pivot + ' FROM ' + @table +' WHERE '+ @where + ' AND ' + @pivot + ' Is Not Null')SELECT @sql='', @sumfunc=stuff(@sumfunc, len(@sumfunc), 1, ' END)' )SELECT @delim=CASE Sign( CharIndex('char', data_type)+CharIndex('date',data_type) )WHEN 0 THEN '' ELSE '''' ENDFROM tempdb.information_schema.columnsWHERE table_name='##pivot' AND column_name='pivot'SELECT @sql=@sql + '''' + convert(varchar(100), pivot) + ''' = ' +stuff(@sumfunc,charindex( '(', @sumfunc )+1, 0, ' CASE ' + @pivot + ' WHEN '+ @delim + convert(varchar(100), pivot) + @delim + ' THEN ' ) + ', ' FROM##pivotDROP TABLE ##pivotSELECT @sql=left(@sql, len(@sql)-1)SELECT @select=stuff(@select, charindex(' FROM ', @select)+1, 0, ', ' + @sql+ ' ')EXEC (@select)SET ANSI_WARNINGS ONGO
View 3 Replies
View Related
Dec 8, 2007
How can I return daily running totals for each day:
TABLE:
date: # of downloads
1/1/2007 100
1/1/2007 12
1/1/2007 8
1/2/2007 100
1/2/2007 20
1/2/2007 20
1/3/2007 40
example of what I want:
RESULTS:
date number of downloads total
1/1/2007 120 120
1/2/2007 140 260
1/3/2007 40 300
I want to return a running total value for each seperate day.
View 4 Replies
View Related
Mar 20, 2008
I'm writing reports that absolutely require page totals for several columns. I don't need a cumulative total for everything in the report, just for the items on the current page. Is this doable in SSRS? If not, is there another reporting package that supports putting data in the header or footer?
View 3 Replies
View Related
Feb 4, 2008
I have a report, using a table, that is grouped by acct. The acct indicates either revenue or expenses. I have a total in my table that will give me the totals for revenue, and the total for expenses. At the end of the report, in the table footer, I want to add a Surplus/Deficit total, which would be the total revenue - total expenses, but I can't seem to get it right. I tried the following:
=Sum(ReportItems!table1_Group1.Value)
thinking that it would give me the total by the group, but I get the error that an aggregate function can only be used on page header and footer. How do I just get a basic grand total in my report?
Thanks in advance!
View 1 Replies
View Related
Dec 12, 2006
Below is part of a matrix report. Sooo close, but I have two problems I have not been able to solve. Please help as a I have several similar reports to do.
1. Row totals. I have been able to get a row total by adding a row group (i.e., $849.7 in the first row). However it does not display a group total (i.e., the sum of $849.7 and $371.3 for Economic Development) for that column.
I have not been able to add a static column outside of the dynamic groupings. I thought this might be a resolution by displaying the sum of the Estimated Costs in a static column and hoping it would show the group totals the same as with the dynamic column totals. Is there a way to do this?
2. Sorting. The report needs to display the groups based on the descending total values. I have specified the following sorts on the groups: sum(Fields!Estimated_Cost),"matrix1_Proj_Typ_Group" descending (this is the first column) and sum(Fields!Estimated_Cost),"matrix1_Proj_Typ" descending (this is the second column). Neither sort appears to be work.
City
County
Federal
Joint
Estimated Cost
% of Total
Estimated Cost
% of Total
Estimated Cost
% of Total
Estimated Cost
% of Total
Economic Development
Business District Development
$849.7
$816.0
66.83%
$27.2
2.23%
$0.0
0.0%
$6.5
0.53%
Industrial Sites & Parks
$371.3
$131.5
10.77%
$190.4
15.59%
$0.0
0.0%
$36.0
2.95%
Total
$947.6
77.61%
$217.6
17.82%
$0.0
0.0%
$42.5
3.48%
Education
K-12 New School Construction
$1,594.7
$223.0
10.05%
$1,363.5
61.43%
$0.0
0.0%
$0.0
0.0%
Non K-12 Education
$37.8
$3.1
0.14%
$33.2
1.5%
$0.0
0.0%
$0.0
0.0%
School System-wide Need
$587.1
$167.2
7.53%
$419.2
18.89%
$0.0
0.0%
$0.0
0.0%
Total
$393.2
17.72%
$1,816.0
81.82%
$0.0
0.0%
$0.0
0.0%
General Government
Other Facilities
$21.3
$17.5
4.3%
$3.9
0.95%
$0.0
0.0%
$0.0
0.0%
Property Acquisition
$8.8
$6.8
1.68%
$2.0
0.49%
$0.0
0.0%
$0.0
0.0%
Public Buildings
$375.5
$294.2
72.54%
$72.0
17.74%
$3.0
0.74%
$6.2
1.52%
Total
$318.5
78.52%
$77.8
19.19%
$3.0
0.74%
$6.2
1.52%
View 4 Replies
View Related
May 2, 2007
Hi Everyone I have an ADP and I need to create a report that will give me the total number of each item. I need the report to show how many [Violation Type], and the total [Loss] per violation. Can anyone help please
Code Snippet
CREATE TABLE [dbo].[Revised_MainTable] (
[I/RDocument] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[IR Number] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[Date] [datetime] NULL ,
[Inspector] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Area] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Violation] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Violation Type] [nvarchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Loss] [money] NULL ,
[Loss Type] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Employee] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Guest] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Action] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Action Type] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Notes] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Security/GC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
View 9 Replies
View Related
Feb 12, 2008
I have a matrix that displays the number of employees grouped by their grade and department and business group. At the bottom i have a subtotal cell displaying total like so for each group
Accounts admin assistant engineer
BSG CENBUS 1 0 0
CENFIN 1 1 0
SUB TOTAL 2 1 0
BUILDINGS BIRST1 0 1 1
CHBRS1 0 1 1
SUB TOTAL 0 2 2
what i need is a total of all employees in each grade as well at the bottom of the matrix like so
Accounts admin assistant engineer
BSG CENBUS 1 0 0
CENFIN 1 1 0
SUB TOTAL 2 1 0
BUILDINGS BIRST1 0 1 1
CHBRS1 0 1 1
SUB TOTAL 0 2 2
TOTAL 2 3 2
Is there a way i can add another row below the subtotals that only appears at the bottom and that sums either the subtotals together or the entire columns?
View 1 Replies
View Related