We have a DB on sql server 2000 64 bit and the build is 2187.
The database consisted of two transaction log files and several data files at the time we took backup. However, the backup taken was a cold backup (backup of files through OS). In this backupset, one transaction log file was skipped due to some error...... Now I want to restore the database for referring to some history data. Will I be able to attach the database with all MDF and one of the transaction log files.??
I heard this kind of recovery is not possible. If anybody can post some solution , I would be grateful...!!
hello all.I have a database file in sqlserver 2005 mode, i set it's compatiblity to sqlserver 2000 (80) but i cant attach it in sqlserver 2000.My host only support sqlserver 2000!I need any help to convert or attach it!Thank all!
My last post was terminated without the error message. To recap, I am unable to re-attach a database to a SQL server 2000 server after I detached it and attached it to a 2005 Server. When I detached it from the 2005 server and tried to re-attach it to the 2000 server I got the following error message:
" Error 5123: CREATE FILE encountered operating system error 5(Access denied) while attempting to create the physical file ..."
I tried using both the 2005 Server Management Studio and the 2000 Enterprise manager to do the re-attachement but got the same error message.
I've got a question regarding attaching/restoring of DBs and wonder if anyone could help me out.
Does SQL Server 2000 provide a functionality to attach/restore DB automatically? ie, some kind of polling service to attach/restore DB that were detached previously?
I am very inexperienced with the Administration side of SQL Server 2005.
I have been given a .bak file which I need to restore onto my SQL Server. The database .bak file was created on another PC and I cannot seem to restore/recover the .bak file onto my SQL Server.
Hi I have new bought the SQL server 2005 enterprise, but it have 2 CDs, so what are the differences between CD1 and CD2? and so which one should i install first? or is it necessary to install both two or just need to install one of them? And about my original sql 2000 database, can i just attach it's MDF file into the sql 2005 engine, or which import wizard can load the sql 2000 MDF into sql 2005? or do i need to keep the sql 2000 engine before do this? thx
I had few databases developed in SQL Server 2005 Developer Edition. I have detached all the databases and stopped developing anything new other than taking reqular backup of detached .mdf and .ldf files. I installed Vista on the other Hard drive that corrupted my XP installation drive letters so I had to reinstall XP OS. I have reinstalled SQL 2005 Dev edition. Now I am trying to attach the database it is giving error of Operating system error 5: "5(Access is denied.)". I tried to copy those .mdf and .Ldf files through windows explorer and it is not letting me copy past in the other place. I am getting Access denied from OS. I have about 5 databases and only one has this problem. What is going on and how do I solve this? Is the OS has locked the file? My home computer is not in a domain. I tried to right click the file to see if I can set access permission on the file. There is no such security options. Any help is appreciated.
I have a an asp.net application running under IIS. this application is using two folders, the virtual directory under C:Inetpubwwwroot and the application phisical folder at C:. I want to manage this applications .mdf database using microsoft sql server management studio express(iam running sql express with advanced services) which means i have to attach the database to Ms sql server managemet studio express tool. What i dont know is if i should attach the .mdf file in the physical folder's App_Data folder at C:myapplicationFolderApp_data or the .mdf file in the virtual directory under C:InetpubwwwrootMyapplicationFolderApp_Data I dont know which of the two i should attach. Where exactly is the running database, the .mdf file in the physical folder or the .mdf file in the virtual directory under wwwroot.
I had a database running under a SQL Server 2000 server. I detached it and then attached it to a 2005 Server. I the detached it from the 2005 server and tried to re-attach it to the 2000 server. I got this error message:
I have used the copy database wizard, but I realized I had forgotten to shrink the transaction log file. So I canceled the wizard. My database, detached by the wizard, has now disappeared. The mdf file is still there, but when I try to attach it manually I get the "create file encountered operating system error 5 while attempting to open the physical file..." error.
I have a customer they are running raid 5 on a windows 2000 server one of the drives went bad. The customer replaced the drive and raid rebuilt the drive, every thing seamed to be fine but there is one database file that cannot be attached to SQL. The file is 15G so I know there is information the error states that the file is not a Primary file. Any clue on how to fix this?
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET. I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page. Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer. Cheers ~ J
Is it possible to detach a database on SQL Server 2000 and attach it to SQL Server 7 ? I know it's fine to do the other way around. Also, any adverse effects I should be aware of ?
I need to move a DB that's on a SQL 7.0 box to a SQL 2000 box for consolidation. I cannot upgrade the 7.0 box to 2000 at this time. I tried reattaching it on the 2000 box and it gave me some errors about versions mismatched. Would DTS be the best way to pull it over? If not, what's the recommended operation?
I built an app, works fine. Had the development environment working fine (VS2005 (SP0) and SQL Server Express). It had been stable for months, no problem.
Then I had to reinstall XP Pro...(finally threw too many conflicting programs into it, I guess...)
I managed to get VS2005 reinstalled ok. However, when I opened and compiled my existing app in VS2005, using Cassini, I got the dreaded error:
An attempt to attach an auto-named database for file <file string> failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
I also get this error for the compiled copy of the app on the same machine, running on IIS. (Where it also previously worked fine).
I appreciate that there are zillions of posts on this issue. I'm hoping that someone might know why this should happen in this particular case.
The thing that's different about this case is that the app was working fine; I have the app deployed on a demo machine and also on a remote server as well as on the development machine.
The only thing that changed is that there was this fresh install of SQL Server Express.
I tried using >> sp_configure user instances enabled','1';RECONFIGURE <<< in SSMSEE, which took, but didn't help.
So something is different in SSE. Since the app is stable everywhere else, I REALLY don't want to go through and adjust the connection strings...MUCH better to figure out what SSE needs to be happy with the existing connection strings...as it was before.
Any suggestions would be appreciated.
Thanks!
EDIT----TRIED SOME THINGS:
Changed folder and file permissions to allow ASPNET full access to the .mdf's and log files (though never had to do this before on the development machine.) No change...
Can see the table contents within the .mdf through SSMSE, and also through Server Explorer in VS2005.
So because the problem happens with both IIS and Cassini, I'm assuming it's got to be an issue between ASPNET and SSE.
EDIT --- TRIED SOME MORE THINGS:
I dimly remember that when I had this problem before, it was that the error message was too "dumb". It wasn't my file that had the permissions problems, it was that the SSE System Databases had to have permissions with respect to ASPNET.
I tried to set that up but I'm a complete newb on this area, so I don't know if I did it right. In SSMSE I created a Login for MyComputer/ASPNET, and gave it all permissions and roles, and then made it an owner for the four system databases...but no joy.
Any pointers on this last piece would be helpful.
EDIT - MORE INFO
The error details
[SqlException (0x80131904): An attempt to attach an auto-named database for file <filestring>.MDF failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
Thanks in advance. What is maximum SQL Server database (*.mdf) file size with SQL Server 2000 as part of Microsoft Small Business Server 2000? (Database files were limited to 10 GB in SBS 4.5 with SQLServer 7.0... has this changed?).
I know allot of folks are having this problem and I tried lots of things but nothing works. I understand the problem is coping the SQL Express on another server is the problem - I just not sure what to do?
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
This is the last statement on the Stack Trace:
SqlException (0x80131904): An attempt to attach an auto-named database for file e:wwwdata81d0493fwwwApp_DataTestDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
I checked my server forum and they said I had to name a database: Example: Database=(unique name);
But this didn't work either.
I just tried a simple web project that has only one database and one table in SQL Express with one sqldatasource and one datagrid. It works fine on my pc but when I use the copy function in Visio Studio 2005 Pro - I can't run the site on the remote server: www.myjewelrydirect.com
I tried coping the database manually. I tried disconnecting the database before I copy it. Below is my connection statement:
I have MS SQL server database with two files 1- x_data.mdf, 2- x_log.ldf The database become suspect and i have no space problem. now the problem is that the log file become corrupted because when i stop the database service I tray to copy the log file into another place but I can't Now the result is that I have one data file x_data.mdf and how can I solve the problem and the question is how can I back the data again when I have a data file without a log file Thanks
I'm in a BIG BIG trouble... A co-worker tried to help me out with the huge database huge log file. So he first detach my db, and deleted the log.ldf file... now, i tried to attach it back....ERROR... could someone help me out ... please..
I have "SQL Server Express" as well as SSMS-E installed on the same machine. I am trying to get SSMS-E to connect to a database (i.e., an .MDF file) that resides in a folder on the desktop.
After establishing a connection to my "SQL Server Express" instance within SSMS-E, I right-click on "Databases", in the "Object Explorer" window and select "Attach..." and click the "Add..." button. The resulting dialog box opens in the directory: "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData" where I see several MDF files. But as I said, my MDF is not in this directory - it's on the desktop.
If I try to navigate to the proper directory on the desktop I see no MDF files. In fact, I cannot even navigate past my username -- that is, I cannot even navigate to the desktop, let alone folders on the desktop. I don't know why.
Of course I *could* put the MDF file in the SQL-E approved directory but shouldn't I just be able to navigate to it using SSMS-E? Incidentally, I *AM* able to connect to the database on my desktop if I use Visual Studio and I specify "UserInstance=true". Not specifying "UserInstance=true" results in this error:
An attempt to attach an auto-named database for file C:Documents and SettingsRobinDesktopMyCompany.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Can someone explain what might be causing the problem with SSMS-E, and, for that matter, why it's necessary to specify "UserInstance=true" in Visual Studio?
Thanks so much. I hope these are not too many questions.
I have Sql Server in one pc and I want to attach one databse that is in another computer that doesnt have SQL Server. Sql Server doesnt permit UNC path when attaching database files. Is there anyway to workarounf this. Is Trace Flag 1807 of any use?
I got a mdf file from my co-workerwho just stopped SQL server and delete ldf fileand give me a mdf file.if it was detached, it would work finebut it was just copied.Is there any way to attach this mdf file?I tried sp_attach_db and sp_attach_single_file_dband both failed.thanks,
I'm trying to see the differences between Backup/Restore and Attach/Detach. I backup and detach a database from SQL Server 2000 SP3 and then attach and restore it to SQL Server 2005 SP1.
The differences I noticed are:
1. The restored database has a much larger initial size (database size is same) for data and log. 2. The attached database has a last backup date 3. If the backup is restored over a database, the restored database is showing owned by the database owner of the database restored over but syslogins and sysusers do not match.
I don't understand why #1 happens.
Are there any other differences between Backup/Restore and Attach/Detach?
Dear All... I want my database file to be attached to remote server database when i published my site Notes : Remote Server Database:SqlServer2000 .net Version:1.1
I was having problems on myt PC so i did a fresh installation. However I had backed up my SQL database (I only have the MDF file and not the log file).
I have tried restoring and attaching options but nothing works :(
I also get the error saying
"Can not open backup device.... Device error or device off-line. See the SQL server error log for more details. RESTORE database is terminating abnormally".
Please this is urgent. WIll be VERY grateful for your urgent reply.
I was having problems on myt PC so i did a fresh installation. However I had backed up my SQL database (I only have the MDF file and not the log file).
I have tried restoring and attaching options but nothing works :(
I also get the error saying
"Can not open backup device.... Device error or device off-line. See the SQL server error log for more details. RESTORE database is terminating abnormally".
Please this is really urgent. Will be VERY grateful for your urgent reply.
