SQL Server 2000 Timeout
Jul 3, 2006
I have been trying to do a query(view) in Enterprise Manger and Query
Analyzer with a timeout result everytime. In EM in happens in about
30 seconds and in QA it happens in about 45 seconds.
I am running the query directly on a W2003SBS server with SQL Server
2000 (V 8.00.2039 )running on the server.
The message is simply
[Microsoft][ODBC SQL Server Driver]Timeout expired
I have set all the time out properties I have seen and that have been
mentioned in these forums to no avail.
I have tried rewriting several of these queries also to no avail.
I am working with a database of 140 million records and have indexed
all the pertinent fields.
I have seen some info up here about a bug in SQL 2000 that impacts EM
and not QA (Q247070), but I can't QA to work either. I seem to have
no impact on the length of the timeout. The query is not that
complicated, but does go against 140M records. I should be able to
set thetimeout longer to let this run.
Any ideas.
Thanks,
Brad
View 3 Replies
ADVERTISEMENT
Mar 29, 2007
The SQL statement below works without the WHERE statement but as soon as i try to use the where it stops working, I think it has something to do with the HAVING statement in the vwMultiAE2 view but I am not sure.It did the same thing when I had it in one view. Anyone know what is going on here?SELECT Ch, Reg, FMM, AE, Acc, Totals FROM vwMultiAE2 WHERE (g1ID = @g1 or @g1 = 'All') AND (g2ID = @g2 or @g2 = 'All') AND (g3ID = @g3 or @g3 = 'All') AND (AEID = @g4 or @g4 = 'All')
vwMultiAE2 >
SELECT TOP 100 PERCENT
Ch,
Reg,
FMM,
AE,
Acc,
Totals,
g1ID,
g2ID,
g3ID,
AEID
FROM
vwMultAE
WHERE
Account_ID IN (SELECT Account_ID FROM vwMultAE GROUP BY g2ID, Account_ID HAVING ( COUNT(Account_ID) > 1 ))
ORDER BY
g2ID, Account_ID
View 5 Replies
View Related
Jan 22, 2008
Background: We have an Asp.Net page where you enter a serial number (for a part my company manufactures), and it performs some updates to the data. Before it does, it does some simple selects for validation.Problem: Testers reported that the page will work fine for a while (5 minutes?), but then suddenly start throwing command timeout exceptions. I discovered that the timeouts always occur at the same validation query. Other queries are executed before this one, and they never timeout. The query is nothing fancy. It joins five tables, has a simple where clause, and selects a count of the records. It runs in Management Studio in under one second. The system is in a development environment under very little load. There's never a valid reason for the timeout. The where clause is parameterized, and the query itself is stored in our data access layer as a string. We execute it using SqlHelper's ExecuteScalar method. There's truly nothing remarkable about the query or how we execute it.After some playing with the page for a bit, and getting lots of successes, I'll get the timeout myself, and it will continue to occur for each additional attempt. If I let the system "rest" for a period of time (a couple of hours), it will be working again.The fun bit: When the system is in "timeout mode", if I go into our data access layer and add a single space character anywhere in the command text (where it has no semantic meaning) the timeouts go away. Take the extra space out, timeout again. Put it back in, no timeout. I did this (jaw agape) for a dozen times and the result was always the same!In previous attempts at debugging this problem, it would be in "timeout mode" and I'd make a semantic change to the query (hoping to fix it) and the problem would go away. I'd tell the testers it was fixed just to have them come back a day later and say it's not. That's what made me finally try the whitespace idea. Changing the string itself made the problem go away temporarily. What I do understand about this:SQL Server will cache the execution plan of a text query, and re-use it on successive queries. It probably caches it based on some hash of the query (just a guess), and changing one character would cause the hashing function to generate a different hash, hence it's a "different" query to SQL Server. So it won't use the same cached execution plan, and will make a new one. If the original execution plan was somehow borked, then that would explain why the timeouts return once I put the query back to it's exact original form. ('Cause it will use that same broken execution plan). This would also explain why letting the system rest would alleviate the problem. I imagine the execution plan eventually expires from the cache.One more thing: If I stop using SqlHelper, and contruct the SqlCommand myself, I can specify a command timeout. If I set it really high, it will eventually complete the query. It will just never do it within the default command timeout period. What exactly is going on is a mystery to me. I thought of a fix: Make the query non-constant and append a random comment at the end to make it appear different each time to SQL Server! LOL! If it came to that, I would immediately submit my own code to TheDailyWTF.com. :D
View 10 Replies
View Related
Jul 20, 2005
Hi all,I am doing some large updates,that may update 10,000 plus rows.This works fine when I execute the SQL directlyin Query Analyzer.If I set the timeout on my VB connection to 0 (zero)the connection should not time out????But it does.If I set the time out to a high value, say 1200,I get the same problem well within 1200 seconds.Also, I am getting the problem that the log fills up,but it is set to auto grow????Any ideas would be appreciated.ThanksGreg
View 1 Replies
View Related
Sep 12, 2005
Hello,I have one application which is having written in asp.net & plain asp.I am having one button on asp page,when i will click on that button, then itwill execute one other asp page.And after the execution of that second asp page, I redirect it to someASPX page with some values.On the ASPX page, it will connect to the Database, and insert the values.Thus, sometime, the following error is occuring :"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."Main thing is that i am testing it on my local machine, then also it is giving me this error ...Insert into statement is also not much complicated :just I inserted three values in one table.Is this occuring due to the mixer of asp & aspx??Plz give me some proper solution.I want it in efficient manner, because this application will be accessed by number of users at the same time.Plz help me.Thanks,Sandy
View 3 Replies
View Related
Feb 5, 2008
Hi All,
I've had a DTS Package scheduled to run every morning since June last year, however on Monday and again this morning, the DTS package has failed on two of its steps. This DTS package runs on SQL Server 2000 and the server is a Windows 2000 Server.
Basically, the DTS Package steps that fail are populating a "cache" table from a "live" table and then performing Inserts / Updates on the "live" table from a CSV file depending upon whether data exists in the "cache" table and whether the CSV file contains an "Insert" or "Update" flag. The live table has just over 800,000 rows of data and our nightly CSV extract, containing both inserts and updates, has about 6000 rows.
The error / failure has only happened in the last two days and I'm not too sure if there's any "timeout" feature in DTS and if there is, how I can modify it, or whether this may be something to do with long transactions or temp dbspace running out.
The time that the DTS package runs was modified last week to run two hours earlier (03:00 instead of 05:00) and has ran okay for a few days. I don't know whether this change is a red herring, as I have checked other DTS packages on the machine and none appear to run at the same time.
Here's the message from the third step in the DTS Package (second one that's failing).
Executed as user: SOEincaservice. ...
Start: DTSStep_DTSExecuteSQLTask_1
DTSRun OnStart: DTSStep_DTSExecuteSQLTask_10
DTSRun OnError: DTSStep_DTSExecuteSQLTask_1,
Error = -2147467259 (80004005)
Error string: Timeout expired
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
Error Detail Records:
Error: -2147467259 (80004005);
Provider Error: 0 (0)
Error string: Timeout expired
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1
DTSRun OnError: DTSStep_DTSExecuteSQLTask_10,
Error = -2147467259 (80004005)
Error string: Timeout expired
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
Error Detail Records:
Error: -2147467259 (80004005);
Provider Error: 0 (0)
Error string: Timeout expired
Error source: Micros... Process Exit Code 2.
The step failed.
Any help is greatly appreciated as I've searched these forums and the web and can't really find any answers.
Cheers,
David
View 4 Replies
View Related
Dec 28, 2006
Hey,
From time to time i get this error "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding." so I tried to change the connection string by adding thie following "Connect Timeout=200; pooling='true'; Max Pool Size=200" but still it is giving the same error! so why is this happening ? and what can I do!
btw the timeout expired happens when a stored procedure is executed at the Fill method !
Thank you in advance
Hiba
View 2 Replies
View Related
Mar 1, 2007
Hi All,
I am facing a problem in SQL Server 2005 and the .NET Environment. I have an SP, which will return me the result within fraction of second when i execute it in SQL Server Management studio. But randomly (Frequently), its giving timeout when i execute it from .NET Envirnment.
If i execute it at that same time in Management studio, i am not getting the error. But getting the Timeout when i execute it in the Server Explorere of VS 2005 or in the Application which uses it.
Can any one figure out the solution.
View 9 Replies
View Related
May 19, 2007
Hi Team Iam working in a asp.net web application. In my system i have installed the xp as os and the in my network is of 2003 server. All files and database are there. But when me accessing the files from my laptop it shows the error as follows Timeout expired. The timeout period elapsed prior to completion of the
operation or the server is not responding.Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Timeout expired. The timeout period
elapsed prior to completion of the operation or the server is not
responding.Source Error:
Line 19: con = New SqlConnection(constring)Line 20: If con.State = ConnectionState.Open Then con.Close()Line 21: con.Open()Line 22: cmdobj = New SqlCommand(query, con) Source File:
Y:Inetpubwwwrootsreeskybuilderssreeskybuildersdbmain.vb Line:
21 If me accessing that same from that mechine there were no errors and i can go thru that program successfully. So please help me to do access the db from anywhere in my network Thanks Rajesh.C.S
View 5 Replies
View Related
Jul 15, 2007
Hi!
I am having a problem with my windows app in VB.net. I am just trying to do a very simple select command to retrieve some data. I am using a hosting server with a VPN.
When i click on the button it keeps giving me the error above. When I use server management express to do the same query it works fine and relatively fast.
So I have tried setting the CommandTimeout to 120 but when it stops, the debugger shows that the value of the COmmandTimeout is 30, although it stops after about 15 secs.
I am really lost and would need some help please! Find my code underneath.
Private Sub RetrieveButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RetrieveButton.Click
'Create a connection string to connect to the database. Associate it to a connection object.Dim connString As String = "Data Source=192.168.24.75;Initial Catalog=edenoverseasproperty;" & _
"Integrated Security=SSPI;User ID=edenoverseasproperty;Password=blossomcar"
'Dim connString As String = "Data Source=JPCHENOTSQLEXPRESS;Initial Catalog=EdenOverseasProperty;" & _
' "Integrated Security=SSPI;User ID=sa;"Dim sqlConn As New SqlConnection(connString)
'Create a new command and associate the connection object to it.Dim cmd As New SqlCommand()
cmd.CommandTimeout = 120
cmd = sqlConn.CreateCommand()
'Define the command type and the source
cmd.CommandType = CommandType.Text
cmd.CommandText = "SELECT * FROM Clients"
'Create a data adapter and a datasetDim da As New SqlDataAdapter()Dim ds As New DataSet()
da.SelectCommand = cmd
da.Fill(ds, "Clients")
'Bind the data to the datagrid
EdenDataGridView.DataSource = ds
EdenDataGridView.DataMember = "Clients"
End Sub
Jean-Philippe
View 2 Replies
View Related
Feb 1, 2008
HI,
I am getting this error on web server. My Appication is working fine on my Local Network where DB server and web server are on different machine. But getting TimeOut on web server. I tested the query on Query Analyzer it takes hardly 3 sec (Max) to execute. There is only Select query and total number of records are around 2100 which is not a big data.
I have used Connect Timeout = 180 in connection string which is also not effective.
please tell me how can I handle this exception.
View 1 Replies
View Related
Mar 7, 2008
We've been having timeout problems.
In our development environment we have IIS and SQL Server 2005 both running on the same box. We use VWD or our dev server's IIS to run the apps.
What happens is the database stops responding to our web applications and we continue to get the timeout error. I can still execute queries from Management Studio but all of the web apps all timeout.
Then, the only was we can get the database to start responding again is if we restart the SQL Server service.
Any ideas as to why the database would stop responding to all of the web apps but not Management Studio? It tends to happen a couple times a day when we are developing. Only the other developer and myself use the DEV environment.
View 2 Replies
View Related
Mar 28, 2008
Hi Dear,I have some problem.Problem Is:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.I have two table.1. BlogUrl2.HistoryBlogstable BlogUrl has approximate 30 url(some part of url).and table HistoryBlogs has approximate 2,00,000(2 lac) record.table history blog has a colon blogUrl and a colon subject name.when a user select one url from blogUrl table then display all subject related to blogUrl.it's ok.but i want select all blogUrl related subject.my query is:SSELECT distinct S.subject_id as 'id', cast(S.subject_raw as varchar(8000)) as 'subject' FROM HistoryBlogs S where substring ( cast(S.blog_url as varchar(8000)), charindex('/',cast(S.blog_url as varchar(8000)))+2, charindex('/', substring ( cast(S.blog_url as varchar(8000)), charindex('/',cast(S.blog_url as varchar(8000)))+2, len(cast(S.blog_url as varchar(8000) ) ) ) )-1 ) IN
('-' , 'discussions.apple.com' , 'feeds.gawker.com' ,
'legalalan.blogspot.com' , 'real.estatez.net' , 'szeteng.blogspot.com'
, 'willdo.philadelphiaweekly.com' , 'www.beginnertriathlete.com' ,
'www.bestbuy.ca' , 'www.bestbuy.com' , 'www.binsearch.info' ,
'www.centennialcollege.ca' , 'www.chatsusa.com' , 'www.dvinfo.net' ,
'www.feedhub.com' , 'www.futureshop.ca' , 'www.libble.com' ,
'www.mcdonalds.com' , 'www.monova.org' , 'www.net-security.org' ,
'www.osnews.com' , 'www.senecac.on.ca' , 'www.shop.com' ,
'www.sumotorrent.com' , 'www.theimpulsivebuy.com' ,
'www.tomshardware.com' , 'www.wal-mart.ca' , 'www.walmart.com' ,
'www.xbitlabs.com') group by S.Subject_Id,cast(S.Subject_Raw as
varchar(8000))This query is ok.but when we want select all blogUrl.then i found above mention errori have asp.net 2.0 and sql server 2000.this type problem i am facing on remote serverPlease help me.Yogesh Saini
View 2 Replies
View Related
Apr 8, 2008
Hi I am getting error:Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not respondingMy Connection string is like this. But still i am getting above error: <add key="ConnectionString" value="Initial Catalog=XX;DataBase=XX;Data Source=XX;User ID=XX;pwd=xx;Min Pool Size=5;Max Pool Size=225;Connection Reset=True;Connection Lifetime=180;"></add> Please advice me.Thanks-Dil
View 1 Replies
View Related
May 12, 2008
Hi, I keep getting this error. I have a query that takes 47 seconds when I run it in SQL Server 2005. My connection string looks like this:connectionString="Server=server; Database=db; Pooling = true; Connect Timeout=60; Max Pool Size=300;I understand that Connect Timeout 60 = 60 minutes. Is there any other place where a timeout can be set in an ASP.NET 2.0 application?Thanks for any ideas.
View 6 Replies
View Related
May 27, 2008
Hi....i got this error,I have already set in my connection string:----
Connect Timeout=300; pooling='true'; Max Pool Size=200;but i got this error till now,how can i solve this .......thanks
View 2 Replies
View Related
Jun 9, 2008
When I connect remotely to SQL SERVER 2005 the following error occurs.Error: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.thanks & regards priya.
View 2 Replies
View Related
Jan 3, 2004
"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."
Environment:-
Framework 1.1
DB:SQL Server 2000 (SQL Provider)
OS:Windows 2000
Language: VB.NET
I'm trying to do mass inserts/updates. Using Transactions. The table hierarchy contains 3 levels (TL1, TL2, and TL3):
Here is what I'm trying to accomplish:
1) Start Begin Transaction (in desperation, I've tried all the isolation levels- I was hoping ReadUncommitted would work!)
2) Do an Insert/Update in table TL1 (this works).
3) Grab the ID from step 2 and do a SELECT on table TL2 to determine if I need to an UPDATE or INSERT.
Since I'd be inserting 3 rows into table TL2 (for a particular parent ID with different types), the first SELECT (on TL2) works and then I'm able to do an INSERT into TL2. The transaction is still alive. Now, I try to do a SELECT on table TL2 to see if a record exists for this type and this is when I get the exception "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."
My guess is that I have a LOCK on the table TL2 (from the first SELECT), which seems to be causing the problem.
Note:
The INSERTs and UPDATEs are done by executing stored procs.
For the SELECTS, I'm using a different connection (from the one which the transaction is using) and close it after the SELECT is executed.
View 1 Replies
View Related
Jul 17, 2005
Okay all this used to be fine on another machine it has jsut been moved. Original machineWindows 2003 server.Net 2.0Sql server 2005New machine Windows 2003 server.Net 2.0Sql server 2005Not that I don't see how this is a timeout setting issue as it shoudln't take but a second to access what it needs. It also workse fine on the original machine which is still up. I go to the website and try to login and get that error message. Says it timed out or server is not responding. below is the details.HERE IS THE ERROR IN EVENT VIEWER____________________________________________________Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 7/17/2005 3:26:38 AM
Event time (UTC): 7/17/2005 7:26:38 AM
Event ID: 1da418026f5641e8914bcafa571233c3
Event sequence: 10
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/Root/application1-127660587297031250
Trust level: Full
Application Virtual Path: /application
Application Path: D:Websitesapplication
Machine name: DATING
Process information:
Process ID: 3892
Process name: w3wp.exe
Account name: NT AUTHORITYNETWORK SERVICE
Exception information:
Exception type: SqlException
Exception message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Request information:
Request URL: http://dating/application/Login.aspx
Request path: /application/Login.aspx
User host address: 192.168.1.20
User:
Is authenticated: False
Authentication Type:
Thread account name: NT AUTHORITYNETWORK SERVICE
Thread information:
Thread ID: 7
Thread account name: NT AUTHORITYNETWORK SERVICE
Is impersonating: False
Stack trace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at citimatch.Login.LoginButton_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.HERE IS THE ERROR IN INTERNET EXPLORER____________________________________________________Server Error in '/APPlication' Application.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +684931 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +207 System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +890 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +601 System.Data.SqlClient.SqlInternalConnectionTds..ctor(SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +159 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +346 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +445 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +304 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +85 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 citimatch.Login.LoginButton_Click(Object sender, EventArgs e) +576 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +78 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5670
View 1 Replies
View Related
Mar 13, 2008
I am getting this error when I am modifying a table. I am trying to change the IDENTITY seed value for a column. How to handle this error.
Thanks.
View 4 Replies
View Related
Jul 3, 2007
Hi,
I am running a stored procedure that collects some records from two tables do some calculations with those records and insert those calculation result in a temp. table. I am calling this stored procedure in my aspx page and then later select all the records from temp table and show it in a table.
When I run this application on browser it give me Timeout expired error but whn I execute the stored procedure it runs properly but takes around 3:10 mins to execute in query analyzer. I did some google work and based on that I specified CommandTimeout = 300 for SP and Connection timeout=400 in web.config. But still it didnt worked. Sometimes it runs properly but sometimes its not.
Where I am doing mistake? and Wht should i do to resolve this? Plz. help.
Thanks in adv.
Regards,
Yogita
View 1 Replies
View Related
Dec 26, 2007
Guys,
I am trying to attach a database object to the App_Data directory I got thie error
Error: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
This is what I did. I right click the App_Data folder and click Add New Item. Then I click the SQL Database. This is where I got the error.
What should I do? Please help
View 2 Replies
View Related
Jan 15, 2006
When I run my web app on my dev machine it works perfect. When I precomile it to my web deployment project and then copy the debug files to my web server I get this problem when trying to login (obviously it's using ASPNETDB.mdf). Any ideas?
Server Error in '/' Application.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +684835
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +207
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +890
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +601
System.Data.SqlClient.SqlInternalConnectionTds..ctor(SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +159
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +108
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +445
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +304
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +85
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +126
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +239
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved) +815
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +80
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +78
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +161
System.Web.UI.WebControls.Login.AttemptLogin() +94
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +101
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +134
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5670
Version Information: Microsoft .NET Framework Version:2.0.50215.44; ASP.NET Version:2.0.50215.44
View 7 Replies
View Related
Jul 2, 2007
Hi,
I am getting the following error when running SQL Server 2005 Upgrade Advisor on a test database of 300Gb aprox. After a long wait we got the following error:
Database Server,"PreUpgrade","Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.","OLDSYSTEMTABLES",
After that error we got several similar errors of "timeout expired" pointing to FTCATALOGNAMERESTRICTION, and others.
I found the same problem reported in other forums and recommended to run the UA database per database, but we are running the Upgrade Advisor against only one database in periods of low activity.
We cannot advance the upgrade to SQL Server 2005 on other databases due to this error. I would appreciate some clues or suggestions.
Thanks,
Juan
View 1 Replies
View Related
May 19, 2008
Hi Everyone,
I have an ASP.Net webpage for uploading multiple files. The process is, when the client uploads files..using SQL queries I am inserting into a database1 and then calling a stored procedure to remove garbage data from database1 and insert this new data into a production database(Database2).
When the file size is aroung 6-7MB it executes fine....but when the size increases to 30 MB I can see the data in Database1 but only when the Stored procedure is called...after a minute or so, I get the following error in the analyser.
I a getting the following error:Error System.Data.SqlClient.SqlException Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
No Changes made to the ClientPlan table.
Inserting records(s) in ClientPlan table.
No Changes made to ClientPlan table.
Updating changes to PlanStatementInfo.
Updated 1 record(s) in PlanStatementInfo.
Inserting new records into PlanStatementInfo.
No new records were added to PlanStatementInfo.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(SqlConnection connection, CommandType commandType, String commandText, SqlParameter[] commandParameters)
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(String connectionString, CommandType commandType, String commandText, SqlParameter[] commandParameters)
at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteNonQuery(String connectionString, String spName, Object[] parameterValues)
at icc.BaseClasses.DL.DLImportPlan.Import(Int32 ClientId, Int32 PeriodId, Int32 UserId) in CDocuments and SettingskroslundMy DocumentskareniccPlanStatementsiccImportDLDLImportPlan.csline 116
Please help me.
View 3 Replies
View Related
Jul 23, 2005
Hello,I have a program called Gestimum which question a MS SQL 2000 DataBase.I have 6 clients who connect to the database througth Gestimum.It works good for 5 of them.But one of them I have TimeOut Error when he wants to print.Gestimum use ADO to connect with Database, it use also TCP/IP toconnect with the server.I already change the timeout delay to 0 (infinite)So i don't understand why only one client doesn't work.If anybody I have an idea ?Thanks wery much.PS: I'm sorry for my poor English (i'm French)
View 3 Replies
View Related
Feb 23, 2007
I have implemented the Forms Authentication in Reporting Services 2000. In addition, we have a reports web application that uses the authentication to access the reports in the Reports Server. I have implemented a similar code that is posted in http://msdn2.microsoft.com/en-us/library/aa902691(SQL.80).aspxhttp://msdn2.microsoft.com/en-us/library/aa902691(SQL.80).aspx for the Reports Server and Reports Manager. For the web application, I added reference to the custom security assembly, created a new ReportsServerProxy, and then called the LogonUser().
Now, one of the functionality we have in the applicaiton is to set the reporting services Timeout for reports that take too long to run. The weird thing is the Timeout (in milliseconds) is getting ignored by the ReportServerProxy using the custom security assembly. I verified that without the custom secuirty assembly, the Timeout property is getting set.
I did find the code for ReportServerProxy's GetWebRequest(Uri uri) is setting the request.Timeout to -1. I thought this was interfering with the rs.Timeout, but removing the code did not make any difference.
How do I set the Timeout property correctly? Do you know of any issues with setting the Timeout property for Reporting Services with Forms Authentication?
Can anybody help PLEASE? I need an answer ASAP. Thanks in advance for your help.
/**partial UILogon.aspx code for ReportServerProxy below**/
public class ReportServerProxy : ReportingService
{
protected override WebRequest GetWebRequest(Uri uri)
{
HttpWebRequest request;
request = (HttpWebRequest)HttpWebRequest.Create(uri);
// Create a cookie jar to hold the request cookie
CookieContainer cookieJar = new CookieContainer();
request.CookieContainer = cookieJar;
Cookie authCookie = AuthCookie;
// if the client already has an auth cookie
// place it in the request's cookie container
if (authCookie != null)
request.CookieContainer.Add(authCookie);
request.Timeout = -1;
request.Headers.Add("Accept-Language",
HttpContext.Current.Request.Headers["Accept-Language"]);
return request;
} ...}
/** Below is the Reports Web applicaiton code that calls the ReportsServerProxy LogonUser **/
Public Function GetReportServerProxy() As ReportServerProxy
Dim rsProx As New ReportServerProxy
rsProx.Url = ConfigurationSettings.AppSettings("REPORT_SERVER_URL") + "/ReportService.asmx"
Try
rsProx.LogonUser("SYSADMIN", "password", Nothing)
Return rsProx
Catch ex As Exception
Throw New Exception("GetReportServerProxy Failed.", ex)
End Try
End Function
Private Function CreateSnapShot() As String
...
Dim rs As RSCustomSecurity.ReportServerProxy
Try
rs = GetReportServerProxy()
' First set the parameters' default values
parameters = setParamters()
rs.SetReportParameters(reportPath, parameters)
If errorsList.Count > 0 Then Throw New Exception
'Server.ScriptTimeout = 10
rs.Timeout = Integer.Parse(ConfigurationSettings.AppSettings.Get("REPORT_PROCESS_TIMEOUT"))
lsHistoryID = rs.CreateReportHistorySnapshot(reportPath, warnings)
'lblStatus.NavigateUrl = "ViewSnapShot.aspx?History_ID=" & lsHistoryID
lblStatus.Text = "Your request has been processed. View report as"
....
Catch ex As Exception
....
Finally
Debug.Write("End : " & Now.ToLongTimeString)
rs = Nothing
End Try
End Function
View 1 Replies
View Related
Sep 11, 2007
Hello,
I am attempting to restore the database from within VB.NET application I am making the following 3 calls:
RESTORE FileListOnly FROM DISK = 'C:MyDatabase.dat'
USE Master RESTORE DATABASE MyDatabase FROM DISK = 'C:MyDatabase.dat' WITH NORECOVERY, MOVE 'MyDatabase' TO 'C:Program FilesMicrosoft SQL ServerMSSQLDataMyDatabase.mdf', MOVE 'MyDatabase_log' TO 'C:Program FilesMicrosoft SQL ServerMSSQLDataLDFMyDatabase.ldf', REPLACE
RESTORE DATABASE MyDatabase FROM DISK = 'C:MyDatabase.dat'
using SMO. This logic works fine with small *.dat files, however when using *.dat file of about 4Gb I get an error on the 3d restore database call:
ExecuteNonQuery failed for Database 'master'.
An exception occurred while executing a Transact-SQL statement or batch.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Operator aborted backup or restore. See the error messages returned to the console for more details.
ExecuteNonQuery failed for Database 'master'.
An exception occurred while executing a Transact-SQL statement or batch.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Operator aborted backup or restore. See the error messages returned to the console for more details.
The same program/logic also works fine when I use MS SQL 2005 and it runs fine from MS SQL 2005 Query Analyzer for both 2005 and 2000 databases. There seem to be only problem with MS SQL 2000 from within VB.NET. Anybody has any idea? I'd appreciate any response. Thanks
Eugene
View 6 Replies
View Related
Jan 13, 2008
Server Error in '/' Application.
Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[InvalidOperationException: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.]
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +1188873
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +413
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
LogDo.Log_Db_Save(String sjm, String k_sql, String bz) +438
LogDo.Log_Save(Exception e, String sql) +124
DataCaoZuo.Manage_ResultTB_Caozuo(String comstr) +145
Cls_UserManage.GetAllUserList() +18
Index.Page_Load(Object sender, EventArgs e) +83
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +34
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 1 Replies
View Related
Feb 5, 2004
Ok bear with me here :). I have a server that is getting about 1000000 hits per day with about 10,000 unique vistors. For the past 2 months I have been revamping my code trying to deal with the increase in traffic. I have 2 boxes, one for the website, and one for the SQL. They are connected through a secure backlink so that I dont have to worry about encrypting the data. So the problem started when I updated the MDAC components a few weeks ago. I started getting these freaking timeout errors, they are up to about 1000 errors per hour. I have been monitoring the connection pooling using the system monitor for about a week and have noticed that I am not maxing out the pooling but I am still dropping connections. I went into the web.config and turned my max connections to 1000. Unfortunately this didn't even put a dent in the problem. It doesn't matter if I have 12 or 212 open connections it still drops them. I am at my wits end with trying to debug this problem. I am wondering if anyone else has had similiar problems recently. Also on a side note I have checked all my connections to make sure that I am closing them. Not only do I close my datareaders but I also set them to nothing. In addition to closing and reseting my datareaders I am also disposing and reseting my connection objects as well as closing them. Any help would be greatly appreciated.
Thanks,
Daniel Christoffersen
View 3 Replies
View Related
Oct 15, 2007
Hi All,
This is first time I am trying to ste timeout on SSIS package ,Can some one let me know which is the best way to set timeout for connection?
And what is the difference between General TimeOut and Command TimeOut?
Thanks,
Shilpa
View 4 Replies
View Related
Jul 6, 2007
I'm trying to test my backups by restoring from production onto a DEV machine.
However, when I insert the backup tape into the drive, then go into SSMS and right click on
Databases -> Restore Database -> From Device .... -> Tape -> Add -> (my tape drive \.Tape0) -> Contents
it displays the contents as it should.
So I click "Close" to close the contents and bring me back to the Specify Backup where I have \.Tape0 selected and I then click "OK"
SSMS sits for a few seconds, and then I get a time out error message:
TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server, Error: -2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3054&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
That's all the further I can get... any suggestions?
I'm VERY perplexed by this...
View 11 Replies
View Related
Nov 10, 2006
Hi,I
get this error from our web application every once in a while. " Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding". I email
myself when an error occurs, and once every 2-3 days I get this timeout
error emails, like 5-10 emails in a span of few minutes. Then it goes
away. I have set the command timeout for 60 secs.
It
doesn't happen from the same stored procedure, actually I have seen it
timeout from really simple 1 or 2 line stored procedures, which shouldn't normally take 1 sec. Its like
sql server just shuts down for few minutes. We have some
backups and maintenance jobs scheduled, but they run only after
midnight. I have checked the
application event viewer, there are no warnings or
error messages for MSSQLSERVER. Can
any one tell me how to check whats going on during that short timespan
when timeout error occurs, and what causes it? I don't want to run sql
profiler continuously for 2-3 days, I am afraid it will slow down the
server more. Thanks.
View 3 Replies
View Related
