Ok, I have tried everything I can think of, but I am still getting errors to do with SQL server 2005 beta. Since the beta expired on all the VS.net 2005 I thought it would be a good idea to uninstall the lot to save some hard disk space...how wrong I was!!
View 4 RepliesHello,
I am trying to uninstall Sql Server 2005 Beta in order to upgrade to
the Sql Server 2005 Enterprise Edition but without success.
Here is what I have already done:
I had VS 2005 2.0 Beta and Sql Server 2005 Beta installed. I wanted to
upgrade to the Professional Editions so I uninstalled VS 2005 2.0 Beta
and Sql Server 2005 Beta from Add/ Remove programs.
I have successfully installed VS 2005 Professional Edition but when I
try to install Sql Server 2005 it gives me an error saying that SQL
Server 2005 has detected incompatible components from beta versions of
Visual Studio, .NET Framework, or SQL Server 2005.
Please advise.
Thank you.
-Arpit
My SQL Server 2005 Beta has expired and I want to unistall it. When I try, it tells me I need to have .NET framework 2.0 before I can run setup. I do have .NET 2.0. And I uninstalled it and reinstalled it and I still get the error from SQL Server when I try to unsintall. This error is pissing me off and this stupid beta is taking up almost a gig of space. HELP.
View 1 Replies View RelatedWhile trying to 'tidy up' I ran into this error when trying to ininstall an SQL 7.0 beta: 'Unable to locate the installation log file C:MSSQL7Uninst.isu Uninstall will not continue'.
Search confirms that such a file is not present. I would reinstall (with the final product) then try Uninstall again, but disk space prohibits this.
Ideas to get around this?
When i tried to install the beta 3 above I encounter the following problems ;-
TITLE: Microsoft SQL Server 2005 Beta 3 Setup----------------------------------------
Setup configuration check cannot be executed due to WMI configuration on the computer D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnetwcls.mof. For details, see the Sqlrunxx.log file or call Microsoft Product Support.
A seach in the net has the followings help link
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&ProdVer=9.00.852&EvtSrc=setup.rll&EvtID=29535&EvtType=sqlca%5Csqlmofca.cpp@Do_sqlMofcomp@Do_sqlMofcomp@x8007735f
Can this version coexist with VS2005 beta 2 because before i can install visual studio 2005 beta 2 I need to uninstall the dot net framework 2.0 beta which come together with the beta 3 sql 2005 installation.
Hey I link this editor, Where can I get this beautiful forum message editor ?.
hi all,
ive been having this problem recently and havnt been able to hunt down a solution for it....
i have a table. 3 columns. name(varchar),age(int) and job(varchar)
i have a stored procedure which takes in name age and job from a form and attemps to through them into the db,but its giving me...
Parameter object is improperly defined. Inconsistent or incomplete information was provided.
or
Type Mismatch..
lovely!
Here's some code for the sproc
CREATE proc sp_insertinfo
@name varchar(50),
@age int,
@job varchar(50)
as
insert into users
values (@name,@age,@job)
GO
and for the actual ASP file...
strConn="Provider=SQLOLEDB;User ID=sa; Password=xxxxx; Initial Catalog=Skills; Data Source=xxxxx"
oConn.Open strConn
Set oCmd.ActiveConnection = oConn
'assign form info to params
name=Request.Form("name")
age=Request.Form("age")
job=Request.Form("job")
'call sproc
oCmd.CommandText = "call sp_insertinfo @name,@age,@job"
'Append params
oCmd.Parameters.Append oCmd.CreateParameter("name", adVarChar, adParamInput, 50, name)
oCmd.Parameters.Append oCmd.CreateParameter("age", adInteger, adParamInput,4,age)
oCmd.Parameters.Append oCmd.CreateParameter("job", adVarChar, adParamInput, 50, job)
'execute the sproc with the params
Set oRs = oCmd.Execute
Anyways it would be great if you could check that out there. Any help def appreciated as this "simple" prob is holding me up big style!
Cheers!
damalo
Do you now, How can I move database with datas to release version of sql server?
Procedores backup/restore can't help becouse of unsuported version database.
Any ideas?
I installed the beta version first and it was working fine, then I obtained a copy of SQL Server 200 Enterpirse Edition and installed it. But I can't connect to the beta SQL Server 2005 Instance on my computer through Enterprise Mananger, but I can in Query Analyzer. ANyone know why?
View 10 Replies View RelatedHi All,
View 5 Replies View RelatedHow do you connect to sql server 2005 express beta when using asp.net
View 1 Replies View RelatedI have completed the uninstallation instructions for my beta versions of SQLExpress (repeatedly). I have used the manual unistall procedures also. I have physically removed the SqlServer directory from the the Program Files directory. The result is the same. This message appears every time I try to to install the MS SQL Advanced package:
"SQL Server 2005 setup has detected incompatible components from beta versions of Visual Studio, Net Framework, or SQL 2005. For detailed instructions on uninstalling SQL Server 2005, see the SQL Server 2005 Readme."
The detailed instructions are NOT detailed enough.
I have uninstalled the .NET 2.0 package and re-installed it. The SERVICES window still lists the SQL Server as present even though it is not started.
Any suggestions?
Hi friends ,
I am trying to uninstall the SQL SERVER 2005 Beta version but I am getting following error.
SQL Server 2005 has detected incompatible componanets from Beta version of Visual Studio. NET framework or sql server 2005
I have SQL Server 2005 is already in my system but it is B version so I am trying to uninstall it but it is not getting Uninstalled. and my system is having visual studio 2003 .net
so how to uninstall SQL Server 2005 Beta version ?
any help will help me a lot
sandeep
Hi,
Is it possible to install SQL Server 2005 Eval on a Virtual PC 2007
client running Server 2008 Beta? Nothing says it isn't possible, it
says I need to service pack it right away, but before it gets started
it comes up with the error 'sqlcu.dll failed to load'. Anyone know
what this is all about?
Any ideas?
Any help would be appreciated.
Thanks!
Hello guys! I have to develop a new web based project. It's a web
portal for events. At the moment it's runnung on an Access database.
The new version should be running on a SQL server - the desicion is:
MSDE 2000 or SQL Server 2005 Express (Beta). What do you recommend? The
webpages are developed under .NET 1.1.
Hi All,
I had installed a beta version of SQL Server (SQL Server 2005 CTP) and now I want to install a full version of SQL Server 2005 Developer Edition on my machine. I have properly uninstalled all the CTP componenets from Add-Remove programs and even deleted the registry data of that installation. I have also removed the related folders from the hard drive.
When I run the setup of the full version it says that setup has detected the beta versions of either .Net Framework, Visual Studio or SQl Server. Remove the beta components using Add-Remove programs and try again. Can anyone help me out of this problem?
Regards,
Sachin
Hi,I’m having a problem uninstalling SQL Server 2005. I went into add/remove programs,clicked on each of the entries for all of the associated services to remove them,then removed SQL Server 2005, rebooted, and the tasks are still listed in services.There are no entries in add/remove programs.I’m removing SQL Server in order to install Visual Studio first - I’ve still gota problem with the “Package Load Failure” that I posted about last week:http://forums.asp.net/thread/1402873.aspxCan anyone give me a clue as to how I can completely remove SQL Server?I’m running Win 2k SP4.Thanks!
View 4 Replies View RelatedHi all,Afetr a bad install of sql server 2005 which failed due to WMI problem; something that seems unfixable save a reinstall of windows.I am now left with a part installion of sql server 2005. From add/remove programs clicking 'remove' activates nothing as does change. However the files are there in program files.At start up I get multiple fatal errors etc.Does anyone know how I can unistall SQL server 2005 completely - perhaps from the command line?Or..how could I stop SQL server from trying to start at start up?All help most appreciated.TFM
View 1 Replies View Related???
View 1 Replies View RelatedI uninstalled SQL Server 2005 through "Add or Remove Programs". Apparently I did something wrong. The files are gone, but when I try to reinstall, the installer says SQL Server already exists, and won't install. When I go to the Configuration Manager, it shows all the components, but not of the services are started - or will start. How do I clean this up without wiping my drive and reinstalling my OS?
I am new to SQL Server 2005. I want to uninstall the Standard version, for now, and install the Express version.
In my un-install of SQL Server 2005 I have managed to end up in a situation where I can't completely un-install, nor can I
re-install. I get a 1635 error message when attempting to install and I get the following message at system startup time:
Your SQL Server installation is either corrupt or has been tampered with(could not open SQLEVN70.RLL)
Please uninstall then re-run setup to correct this problem.
Assistance in resolving this would be deeply appreciated.
If I try to uninstall my SQL Server 2005 I nead to have instaled SqlSupport.msi in my list programs and I don't have it.
Then I found it in a folder "...ServersSetup" but it dosen't work. I can't install that program and if it's already instaled I can't see it in my list programs.
What can I do?
how to uninstall SQL Server 2005?
View 1 Replies View RelatedI have been trying to uninstall SQL Server (Enterprise Edition) from one of our development boxes and the programs bombs out. When I looked in the log file, I see the following error message which is useless needless to say. Has anyone come across this issue? How did you resolve it? Thanks in Advance.
=== Verbose logging started: 2/11/2008 9:38:35 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (98:C8) [09:38:35:385]: Resetting cached policy values
MSI (c) (98:C8) [09:38:35:385]: Machine policy value 'Debug' is 0
MSI (c) (98:C8) [09:38:35:385]: ******* RunEngine:
******* Product: {EB76B218-8FC5-41DF-9F1F-7FF3E0448383}
******* Action:
******* CommandLine: **********
MSI (c) (98:C8) [09:38:35:385]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (98:C8) [09:38:38:376]: Failed to grab execution mutex. System error 258.
MSI (c) (98:C8) [09:38:38:376]: Cloaking enabled.
MSI (c) (98:C8) [09:38:38:376]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (98:C8) [09:38:38:391]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (c) (98:C8) [09:38:38:391]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (98:C8) [09:38:38:391]: MainEngineThread is returning 1618
=== Verbose logging stopped: 2/11/2008 9:38:38 ===
Hello
after uninstall SQL server 2005 by tools (vs_uninst_betas) still exist in program menu.
How can uninstall definetly.
Thanks you.
i need help for completely removing sql server 2005 from my computer,in order to reinstall it again.
please help me
Hi,
I had to do a system restore to solve some other issues now my SQL Server 2005 doesnt work (SQL Server 2000 on the same machine [diffrent instance] does). I have tried to uninstall with add/remove programs but the instance doesnt appear there. I have tried to use the 'ARPWrapper.exe /Remove' command as described in KB909967 wich also fails.
I have also tried to reinstall with no sucess. I also tried uninstalling SQL2000 and removing as many references as I could find, again now joy.
Is there a script somewhere to remove everything (although I would like to try and keep the SQL2000 instance)?
Hi,
View 3 Replies View RelatedLong story short: Installed SQL Server 2005 Developers Edition along with Visual Studio 2005. Everything worked as it should.
Then there was a problem installing .NET Framework 2.0 Security Update. Fixed that by uninstall and reinstall of .NET Framework 2.0.
Now SQL Server does not work. So I figured uninstall/reinstall. Only problem is that it WILL NOT uninstall. I have tried to uninstall manually per KB article (9009967). That doesn't work either.
The error info that I'm geting is:
LinkID: 20476
Product Name: Microsoft SQL Server
Product Version: 9.00.2047.00
Message source: setup.rll
Message ID: 50000
EvtType: stateengine
esourcemodule.cpp@ScheduleActionAction@sqls::ResourceModule::LoadStringW@0x716
I get the same data during setup or uninstall. Neither of which completes.
Needless to say this is driving me nuts. I'm trying to learn VB.NET programming and many of the examples use SQL Server.
Any help would be appreciated.
Hello All.
I have a failed sql cluster setup on Windows 2003 OS cluster. sql will not uninstall on node 1 because it says the group name was not specified in the template.ini file for the cluster. The OS cluster nodes have been evicted from the cluster. The OS cluster is no longer available to provide a group name for.
SQl uninstall process process is failing because of the error mentioned above.
I want to completely , uninstall SQL server from both nodes,
clean up Windows Server and install just a default instance of SQL server on just one of the machines, The cluster can wait.
Thanks.
This is getting extremely annoying. I cannot unistall another instance of SQL Server Express 2005.
I have had three different servers with the separate installs of SQL Server Express 2005. I remove the product (Backup Exec, Dell IT Assistant, Microsoft System Center 2007). I uninstall the third-party product and they leave behind SQL Server Express 2005. For what idiotic reason I do not know. Then I try and remove SQL Server Express 2005 and for the third straight time it fails.
Here's the latest failure error, "TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=1603&EvtType=sqlca%5csqlcax.cpp%40SetInstanceProperty%40SetInstanceProperty%40x534
------------------------------
BUTTONS:
OK
------------------------------
Does anyone know how to actually remove SQL Server Express 2005? This is pathetic.
Hi.
I'm trying to perform a silent install/uninstall of SQL Server 2005 Express.
I manage to install silently, but when trying to uninstall with the following command line:
sqlexpr.exe /qb REMOVE=ALL INSTANCENAME=<INSTANCENAME>
there is one item left behind - "Microsoft SQL Server Native Client"
Does anyone know how to uninstall this as well?
Also, if MSXML 6.0 is already installed when installing SQL Server 2005 Express, when performing an uninstall with the above command line, MSXML 6.0 is also uninstalled, which may not be the desired outcome.
When I try to un install SQL Server Express (VS 2005 Beta 2), which is not functional, I get an error message:
View 5 Replies View RelatedAfter going through "Add and Remove Programs" and removing all components of SQL Server 2005 Standard Edition on my desktop I get an error telling me there is a copy already installed and to remove it before continuing. Well nothing shows up under "Add and Remove Programs"; Windows cleanup shows none of the SQL Server components; a check of the register (HOTKEYS.../unistall) have no SQL Server entries; under services all SQL Server services are disabled and not running.
I have followed all the steps in http://support.microsoft.com/kb/909967 (Describes how to uninstall an instance of SQL Server 2005 manually).
Anyone out there got a solution? (Visual Studio 2005 eval is loaded on the box)