It gives following errors
1.time out
2.general network failure
* Are these due to large number of online connnections
*If so what is the maximum number of connections possible
*what is the hardware requirement to avoid this
*what is the impact on stored procedures
*How to tune the server to overcome the problems
*I'm currently using the standard edition what is the impact on enterprise edition
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Thanks,
Lee
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG
I reveived the following error.
how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507).
. . . .
. . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736).
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . .
. . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875).
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
Our software vendors upgraded their software and our environment - and applications do not interface as they ought. The vendors do not appear to have any further ideas (to those listed below) and at this stage neither do I. It is now a week since the *upgrade* went live. Looking for new suggestions....
Full story (epic) below. Object names have been changed to protect the *innocent*.
Our organisation had 2 applications:-
appBank
appHouse
both running on the respective platforms:
Server name svrCAT:
Windows Server 2000 sp 4 / SQL Server 2000
Server name svrDOG:
Windows Server 2000 sp 4 / SQL Server 2000
Transactions were "posted" from svrDOG to svrCAT via a linked SQL Server, using login dbL1nkLogin.
dbL1nkLogin was made a user of (with relevant table permissions) of the respective databases:
dbForBank
dbForHouse
*** At this point all was working ***
Upgrading appBank to appBigBank required SQL Server 2005 (and more diskspace).
A new server was purchased:
Windows Server 2003 R2 sp 2 / SQL Server 2005 (Server name svrHORSE)
A linked server was created from the SQL instance on svrHORSE to svrDOG using login name dbL1nkLogin.
dbL1nkLogin was made a user (with relevant table permissions) on database:
dbForBigBank
Attempts to "post" transactions were "posted" from svrDOG to svrHORSE via the linked SQL Server fail with
the appBank application generating the following errors:
On first attempt:
************* FILE ERROR *************
Error Code...... 3902-
Error Message...The COMMIT TRANSACTION request has no co
.rresponding BEGIN TRANSACTION.
Table Name......** NOT APPLICABLE **
Description.....** NOT APPLICABLE **
Function....... COMMIT
sys991: Program already in use
COBOL error at 000444 in sys500
Called from 00076A in sys990ssv
Called from 000457 in sys991
Called from 01177D in gls489
Called from 000DFA in gls396
Called from 003961 in gls394
Called from 000258 in glp900
Called from 003DC1 in syp250
On subsequent attempts:
************* FILE ERROR *************
Error Code...... 1206-
Error Message...The Microsoft Distributed Transaction Co
.ordinator (MS DTC) has cancell
Table Name......tblHouseFinancials
Description.....DYNAMIC SQL CALL INTERLUDE
Function....... UPDATE
*FAILED* Processing Job 'WIN/'
* Parameters and controls within the appBank application were verified.
* Password on dbL1nkLogin was reset in the SQL instances on svrHORSE and svrDOG
* Compared the link server settings on svrHORSE to svrCAT:
Security tab: Be made using security context - Remote Logging: dbL1nkLogin / password
Server Options: Collation Compatible checked (on svrHORSE only)
Data Access checked
RPC checked
RPC Out checked
* Made dbL1nkLogin dbo on databases dbForBigBank and dbForHouse.
* Changed default database from master to dbForBigBank on svrHORSE
* Rebooted svrHORSE and svrDOG (multiple times)
* Verified that svrHORSE could ping svrDOG, and vice versa
* Using DTCping.exe, Verified that the SQL instance on svrHORSE could ping svrDOG, and vice versa
* On svrHORSE, Administrative Tools -> Component Services -> Computers has the following settings for "My Computer" Network DTC Access:
Network DTC Access - checked
Allow Remote Clients - checked
Allow Remote Administration - checked
Allow Inbound - checked
Allow Outbound - checked
No Authentication required - checked
Enable XA Transactions - checked
DTC Logon Account - NT AuthorityNetworkService
These settings were already set. My understanding of KB329332 suggest they are correct. As I could not establish the configuration date of these settings rebooted the server to ensure they'd taken effect.
* Loaded SQL Server 2000 sp4 on svrDOG (Rebooted afterwards in case services not stopped and started correctly)
srvDOG now has MDAC 2.8 sp1 (2.81.1117.6) while srvHORSE has a later version (2.82.3959)- I assume sp2. While they are not the same version, MDAC 2.8 sp2 KB 231943 advises that 2.8 sp2 is not available via the web - so I think it's the best I can do).
* Stopped and manually started MSDTC and SQL Server (via Administrative Tools - Services) in case MSDTC was not being started first.
* KB873160 suggests opening port 135 and adding msdtc.exe as an exception in the Windows Firewall. At present there is no firewall on svrHORSE - which I would assume negates this necessity (at present). In Administration Tools - Services there was a service for the firewall running. Stopping this service has no effect on this issue.
* ( The svrHORSE machine was not created from an ghosted image ).
** None of these things have resolved the issue. **
.... to be continued...
KD
I created an SSIS package for a client that does data importing. When I run the pacakge from Visual Studio there is an error window showing all the errors and warnings. A good example of an error is if the import file is in the wrong format.When there is a error or warning can I write the error log to a file OR notify someone of the errors so they can make corrections and rerun the package OR any ideas that the client can find out what went wrong and then make corrections accordingly? Thanks
View 1 Replies View RelatedI am getting the following errors when I try to connect to certain databases. Thanks for any help. Do I need to use the Surface area configuration tools to allow remote connections?
Error: 0xC0202009 at Populate_DBA_REP, Connection manager "MultiServer": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [2]. ".
Error: 0xC020801C at Load Servers, OLE DB Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "MultiServer" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Load Servers, DTS.Pipeline: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Load Servers, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Load Servers: There were errors during task validation.
I have a web application with a sql server 2000 backend. I use stored procedures to enter data, and use the sql RAISEERROR function to raise custom errors with the input.
My question is, is there anyway I can assign a number to these error and then catch them in my code?
e.g. I have an asset. Someone has authorised an inspection to occur on it. Now, they cannot authorise two inpsections - they must wait for one of the inspections to occur. I catch when someone is trying to authorise two inspections in the database, and raise an error.
But I then want my code to catch this error message and display a user friendly message to the user. Is there a way of attaching a number to the message so that I can catch it in my code and display an appropriate message?
I run a large support site - which was recently rebuilt from the ground up using the CSK - its hosted on a shared SQL server enviroment - and although bandwith and SQL server usage are huge - it was running fine.
But increasingly badly now - to the point where almost no internal pages will work in anything but the quietest times, we are getting sql timeout errors. This basically means most of the site (which is 1850 odd pages of dynamic) is offline. Since this is a support site and responsible for saving a great many lives - this is a serious serious problem.
the SQL DB, which is shared between the CSK, and a dotnetbb forum - is a little over a gig...big I know - but surely SQL is capable of managing tons more than that?
Has anyone heard of a situation like this - and perhaps shed some light? there are a number of connections that are set to sleeping (about 5-10 at a time) - but they tend only to be about 2 minutes old, and I am under the impression that only if they are sleeping for more than 5 minutes should you be concerned?
I really hope someone can help...because this is a complete nightmare.
Many Thanks,
Harley
Please help. We have no idea what is wrong.
Error message occurs at the end of the load.
"Error at Destination for Row number 6218607. Errors encountered so far in this task: 1. SqlDumpExecptionHandler: Preocess 11 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process."
Thanks for your help
Adrian.
Hello,
I want the server to check validation rules and not the user application
is this possible???
I want to send my own messages to the user and dont want the user to see the
servers messages.
Thank you in advance
Eran
I moved an instance of SQL Server 2005 Express to a different server and now receive the following error:
System.Data.SqlClient.SqlException: An error occurred in the Microsoft .NET Framework while trying to load assembly id 65538. The server may be running out of resources, or the assembly may not be trusted with PERMISSION_SET = EXTERNAL_ACCESS or UNSAFE. Run the query again, or check documentation to see how to solve the assembly trust issues. For more information about this error:
System.IO.FileLoadException: Could not load file or assembly 'xmpdbif, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. An error relating to security occurred.
I have read about a resolution that requires you to change the db owner on select databases; I have contacted the software provider to see what users own what databases. I wanted to see if anyone had suggestions on this as well.
Hi, im new to SQL server and the report services. I have SQL 2005 express installed on windows xp pro with reporting services and use .net 2.0 framework.
I have recently tried deploying a report i have wrote in VB.net (VS2005 standard) but encountered problems. I have setup the report server to allow remote connections and i am able to connect to it from other computers on my LAN. I have setup anonymous login through IIS to both reports and reportserver instances, this works fine. When i try to deploy a report to my server i am asked for login details. I have tried to login with the execution account set in report server manager but that doesn't work and i have tried the sa SQL account.
When i connect to the report server by http://servername/reportserver it says internat error and there is also the error page displayed when i connect with http://servername/reports. Is this becuase i have not deployed any reports? If i check the server status it says running and initialised, sometimes. I have reinstalled SQL 2005 and report services about three times and still i am getting a problem. I am sure there is something wrong with how i have configured the server but dont know what.
Also when deploying reports should i put the URL as http://servername/reports or ../reportserver?
I can provide error logs if someone could point me in the direction of them if required to. (reportserver just says refer to error log)
I am sure this is an old problem and down to my config of the server. Need help though!!
Thanks in advance for any replies
Regards,
Matt
I notice this running the SQL Server Profiler under the application name Report Server. Every time it runs, it reports an error (in the Error field of Profiler). Does anyone know what this is?declare @p1 nvarchar(64)set @p1=NULLexec GetDBVersion @DBVersion=@p1 outputselect @p1
View 1 Replies View Relatedhi i am running a stored procedure and i want to trap the error of that stored procedure and pass it on the user in the asp.net prog.
my stored procedure are running thru a class library using C#. i tried various options of creating a new sql connnection with out using the classlibrary, but i dont get any errors. the code s
used is as follows Dim conn As New SqlConnection(System.Configuration.ConfigurationManager.AppSettings("dbconnection1"))
Dim cmd As New SqlCommand("usp_ImportPlanDetails", conn)
cmd.CommandType = CommandType.StoredProcedure'cmd.Parameters.AddWithValue("@ClientId", Session("ClientId"))
AddHandler conn.InfoMessage, New SqlInfoMessageEventHandler(AddressOf MessageEventHandler)
conn.Close()
Private Sub MessageEventHandler(ByVal sender As System.Object, ByVal e As SqlInfoMessageEventArgs)
Dim strMessage As String
For Each sqle As SqlError In e.Errors
strMessage = "Message:" + sqle.Message + "Number:" + sqle.Number + "Procedure:" + sqle.Procedure + "Server:" + sqle.Server + "Source:" + sqle.Source + "State:" + sqle.State + "Line Number:" + sqle.LineNumber
' strMessage = String.Format("Message: {1}, Number: {2}, Procedure: {3}, Server: {4}, Source: {5}, State: {6}, Line Number: {7}" , new Object[]{sqle.Message, sqle.Number, sqle.Server, sqle.Source, sqle.State, sqle.LineNumber})
'Console.WriteLine(strMessage)
lblErrorMsg.Visible = True
lblErrorMsg.Text = strMessage
and also tried doing this oImportPlan = New ImportPlan(System.Configuration.ConfigurationManager.AppSettings(APPSETTINGS_CONNECTION))
With oImportPlan
Try
.ClientID = Session("ClientId")
' .FileName = strFilePath1
.save()
Catch sqlex1 As SqlException
LogException(sqlex1)
End Try
End With
Catch sqlex As SqlException
LogException(sqlex)
End Try
Catch ex As Exception
lblErrorMsg.Text = "Error: Import Failed" + ex.Message
lblErrorMsg.Visible = True
End Try but have no luck in displaying the errors, My stored procedure has raiseerrors, Please help me out
Hi, Folks!
I have a multitier app running 24 x 7...All is running ok until the server delay too much to respond when I'm trying to add the records, so I start to
receive erros from the msdtc and the transaction is aborted...How can I resolved this trouble? I'm not sure if the cause is too long response from the server, but I have noted that in some moments the server is busier than when it's running ok...just for clearing this, my app have a maximum of 5 threads each one create an transactional objects to process the new entry.
Any idea?
TIA!
Armando Marrero
CTI. Miami
I have my error routines and raiserrors working fine. I can run my stored procs through query analyzer and I get the error messages I expect. WHen the stored proces are run through Access, VB, C++, what is required to return the
error messages I see in QA. Is it specific to the app front end. All my front ends will be using ODBC as their
connection
Hi guys, I'm trying to figure out why i'm having issues with the SQL server agent trying to start.
the error i get is 14258 cannot perform this operation while sqlserveragent is starting. try again later. sql-dmo(odbc sqlstate:42000)
any ideas how to fix this. I start the service as a domain user that is an admin on the server. but when i run a job it gives me the above error.
thanks.
In SQL Profiler, I see Exception records with a TextData entry like:
Error: 2601, Severity: 14, State: 3
There is no other error text for that entry and there are no corresponding log entries. When I look up the help for error 2601, I see:
Message Text:
Cannot insert duplicate key row in object '%.*ls' with unique index '%.*ls'.
That's obviously a C sprintf format string. I would expect to see the resulting formatted text somewhere. Where would I find detail on these errors?
I am experiencing the following problem when running a backup. This process was working really fine for 3 months.
BACKUP DATABASE [DBLIVE] TO DISK = N'C:BACKUPSdblive' WITH INIT , NOUNLOAD , NAME = N'DBLIVE backup C', NOSKIP , STATS = 10, NOFORMAT
Database size 10G
Recovery Mode : Simple
Daily Backup
Error message:
Executed as user: ACC33Administrator. 10 percent backed up. [SQLSTATE 01000] (Message 3211) 20 percent backed up. [SQLSTATE 01000] (Message 3211) 30 percent backed up. [SQLSTATE 01000] (Message 3211) 40 percent backed up. [SQLSTATE 01000] (Message 3211) 50 percent backed up. [SQLSTATE 01000] (Message 3211) 60 percent backed up. [SQLSTATE 01000] (Message 3211) Nonrecoverable I/O error occurred on file 'D:sqldbDBLIVE_Data.MDF'. [SQLSTATE 42000] (Error 3271) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
Thank You.
Hi!
We have a Microsoft SQL Server 2000 SP3 running database for Microsoft
Navision 3.7
From time we encounter problems, especially when running heavy query
procedures from Navision, with the transaction log. It's actually setup as
folows:
File properties:
File growth By percent (10)
Restrict file growth (MB) 10000
OPTIONS:
Recovery model: simple
Settings: Autoupdate statistics, Auto create statistics, Autoshrink
We get the following errors (once every 2-3 months so far):
The log file for database 'ME_Prod' is full. Back up the transaction log for
the database to free up some log space..
in between numerous abovementioned messages I have the following:
Configuration option 'show advanced options' changed from 1 to 1. Run the
RECONFIGURE statement to install..
Could not write a CHECKPOINT record in database ID 9 because the log is out
of space.
Automatic checkpointing is disabled in database 'ME_Prod' because the log is
out of space. It will continue when the database owner successfully
checkpoints the database. Free up some space or extend the database and then
run the CHECKPOINT statement.
We connect via terminal services to an excel spreadsheet that has anODBC link to an access database using a pivot table, when we try torefresh the data within the excel spreadsheet we receive the followingerror "the microsoft jet database engine cannot find the input table orquery....."this works ok if the user connects to terminal services as theadministrator however if they connect as any other issue it won't workAnyone got any ideas?(have tried 2000 ts and 2003 ts)
View 3 Replies View RelatedHi,I'm using sql server 2000 sp4.I've 2 databases linked, an instance and my local.I'm getting two different errors when trying to update the remote table(local server) from the instance.There is only one row of data in the table with an identity field.1st sql:-UPDATE [local].[database].dbo.NUMBERS SET [f 1]=3This gives me the error:-Server: Msg 8180, Level 16, State 1, Line 1Statement(s) could not be prepared.Server: Msg 170, Level 15, State 1, Line 1Line 1: Incorrect syntax near '1'.If I was to remove the space from [f 1] and use [f1] it would workfine."select [f 1] from [dev001].[fashion Master].dbo.numbers"will return the correct valueAny Ideas ?2nd sql:-UPDATE [local].[database].dbo.NUMBERS SET [field1]=isnull([field1],0)+1This gives me the error:-Server: Msg 7306, Level 16, State 2, Line 1Could not open table '"fashion Master"."dbo"."NUMBERS"' from OLE DBprovider 'SQLOLEDB'. The provider could not support a row lookupposition. The provider indicates that conflicts occurred with otherproperties or requirements.[OLE/DB provider returned message: Multiple-step OLE DB operationgenerated errors. Check each OLE DB status value, if available. No workwas done.]OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IOpenRowset::OpenRowsetreturned 0x80040e21: [PROPID=DBPROP_BOOKMARKS VALUE=TrueSTATUS=DBPROPSTATUS_CONFLICTING], [PROPID=DBPROP_COMMANDTIMEOUTVALUE=600 STATUS=DBPROPSTATUS_OK], [PROPID=Unknown PropertyIDVALUE=True STATUS=DBPROPSTATUS_OK], [PROPID=DBPROP_IRowsetLocateVALUE=True STATUS=DBPROPSTATUS_CONFLICTING],[PROPID=DBPROP_IRowsetChange VA...If I was to remove the isnull part, then it will work okAny ideas
View 3 Replies View RelatedHello to all,I've fallow problem. I've a sp called as a job of SA each minute. Thisruns pretty nice, but from time to time, the job is aborted, and Idon't know why.Considering my logging, which is implemented in DB, I know, in whichpoint it is happening, but I don't know the exact error.This one is for sure any SQL server exception.I wanted to track this error, but reading all news, and help, andperforming some tests, I've find out, that this is almost likeimpossible, to catch the error in t-sql code (for example in this sp),and wirte it to any table for futher review.Reading great documentation from Erland Sommarskog, I know, there isno way to catch this error in t-sql, because, usualy the sql terminatesexecution of the code immieadetly (so I found it also by my tests).Now, my question is: sice I'm calling this sp continously in ServerAgent as a job scheduled to be called each one minute, is it any way,to trap this error on this level? In SA? and THEN save it somewhere inmy db?I'm calling the sp as a 'command' in job step as 'execsp_name_of_procedure'.If I'll try like this:declare @err intset @err = 0exec sp_name_of_procedureset @err = @@errorif @err <> 0begininsert into tbl_logger (sql_error, msg) values (@err, 'SQL raised anerror')endwill it work, or the sql will assume the whole code as a one batch, andwill terminate after call of sp?Thank you in advance for reply.GreatingsMateusz
View 2 Replies View RelatedHello All,
I re-installed the IIS and sql server report services. Then I config the sql server 2005 report.
After that I run the http://servername/reports.
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. (rsInvalidReportServerDatabase) Get Online Help
Can anyone tell me how to fix this problem.?
Thank you.
TJ
I received this error on upgrade installation from SQL 2000 Standard to SQL 2005 Standard. It doesn't seem to be causing any problems after install but I am currently not using Notification Services in any production capacity.
Errors:
-----------------------------
Microsoft SQL Server 2005 Setup
------------------------------
Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90DTSTasksMicrosoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2147024893
Error message: The system cannot find the path specified.
Error description: Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the path specified.
------------------------------
Microsoft SQL Server 2005 Setup
------------------------------
Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024893
Error message: The system cannot find the path specified.
Error description: Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the path specified.
Any help would be greatly appreciated. Thanks, Keith
I have hundreds of these errors saying 'Login failed for user 'Reporting' The user is not associated with a trusted SQL Server connection [CLIENT: ip address]
The ip address is that of the server that sql server is installed on.
Looking in my log file, all looks good until I get to Service Broker manager has started, then I get Error: 18452, Severity: 14 State: 1 then these two lines repeat about every minute, for the last 3 days!
I think I must have just missed a tick box somewhere, but where?
I have been into one of the databases, and input and checked data, both via an application I wrote and SQL Server Management Studio.
I am also having trouble connecting using my application to connect to the database, I can only connect if I use a Windows administrator account (this SQL Server 2005 running on a Windows 2003 Server, with the app on PC running Windows 2000)
We are getting the following error messages on a regular basis.
[sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
[sqsrvres] printODBCError: sqlstate = 08S01; native error = 2746; message = [Microsoft][SQL Native Client]TCP Provider: An existing connection was forcibly closed by the remote host.
[sqsrvres] printODBCError: sqlstate = 08S01; native error = 2746; message = [Microsoft][SQL Native Client]Communication link failure
[sqsrvres] OnlineThread: QP is not online.
[sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
[sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
[sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
[sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
[sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
I have windows server 2003 service pack 1 and sql server 2005 service
pack 1 - 64 bit. Sometimes it happens in the middle of the night. Sometimes it's in the middle of the day and sometimes it's multiple times in the same day. Usually the server fails over.
Any help is appreciated
Hi. I'm totally new to SSIS (SP1), and I'm having a raft of troubles transferring DB's using the 'Transfer SQL Server Objects Task', which seems to be the closest replacement for the old DTS Transfer Objects tool.
I'm trying to transfer a DB from an SQL Server 2000, where I only have SQL Server authentication (it's a shared hosting environment) to my local SQL Server 2005 server, where I'm logged in using Windows Authentication (although I have the same issues if I use SQL Authentication locally).
Here's the list of errors I'm getting.
If I don't select 'copy all tables', I receive a "table does not exist at source" error. If I do copy all tables, suddenly it can find the same table.If I select "Drop objects first", and the object doesn't exist in the destination, in throws an error.The "replace data" doesn't appear to work - it throws a "cannot insert duplicate key" error if the table I'm copying already contains data.If I copy Primary Keys, and one of the tables doesn't have a primary key, I get a "set identity" error, presumably because it's trying to set an ID on that table at the destination.Finally, if I delete all data at the destination, I'm currently receiving a "Invalid character value for cast specification". Which I don't get at all - why is it casting at all, if it's copying objects - they should be identical on both sides?Any and all suggestions would be really appreciated. I'm also having (different) problems transferring objects between SQL Server 2005 servers, but nothing in production, so it's less important.
Cheers,
Steve.
I am trying to install SQL Server 2005 Express, but it fails.
View 6 Replies View RelatedHi,
I am getting a linked server connectivity errors randomly. We have a set of DTS packages to pull data from OLTP (SQL 2000) to reporting server (SQL 2005) through linked server and both instances are on same server. The process is running ok on Acceptance server, and failing on production server. It is throwing the following error randomly, and it is getting fixed for a while after restarting SQL 2000 service.
An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "TCP Provider: The specified network name is no longer available. ". An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "OLE DB provider "SQLNCLI" for linked server "GIS_STG" returned message "Communication link failure".". An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.".
Appreciate any insights on this annoying issue.
Thanks,
Veera
Hello everyone.
I have a problem in accessing my SQL SERVER Express 2005 database.
The error is:
Cannot open database "MyDB" requested by the login. The login failed.
Login failed for user 'NT AUTHORITYSERVIZIO DI RETE'.
My ConnectionString is:
Data Source=(local); User ID=ExtApp; Initial Catalog=MyDB; Trusted_Connection=yes; Connection Timeout=15
In SQL SERVER I have set the Database log in ExtApp with SQL Authentication mode, instead of Windows Auth mode, and even inserted in my database the user associated with this login
The debugger keeps on telling me the same error that occours when I Try to open a connection (please note that the code has no errors because it works in another application, a client app not an asp.net 2.0 web app, so I assume that there are no errors or mistakes in the code).
Please can anyone tell me something about this????
Thanks
Hello all,
Thought I would post here in case anybody can give some information.
Here is the background information:
I have 2 tables (stores and sales) from the Pubs database in Sql Server 2000 copied down to a SQL Server CE database. There is no foreign key/primary key relationship between the 2 tables in the CE database.
Here are the update queries that cause the error:
UPDATE st
SET st.zip = 66668
FROM stores st
INNER JOIN sales sa ON st.stor_id = sa.stor_id
AND st.stor_id = 6380
Update stores SET stores.zip = 55555
FROM sales, stores
WHERE stores.stor_id = 6380
AND stores.stor_id = sales.stor_id
Here is the error message that is generated when I run the query (Param 0 and Param 1 change according to what column and line the FROM clause is in):
Error: 0x80040e14 DB_E_ERRORSINCOMMAND
Native Error: (25501)
Description: There was an error parsing the query. [Token line number,Token line offset,,Token in error,,]
Interface defining error: IID_ICommand
Param. 0: 2
Param. 1: 1
Param. 2: 0
Param. 3: FROM
Param. 4:
Param. 5:
I ran the 2 queries in SQL Query Analyzer in SQL Server 2000 and they worked just fine. I also created 2 new tables (stores1 and sales1) in SQL Server 2000 using the Select Into clause. The new tables were created from the sales table and stores table in the Pubs database. The new tables had no foreign key/primary key relationship.
I ran the queries again in Query Analyzer against the new tables and the queries produced no errors.
Any suggestions?
Thank you,
Aaron B