Hi all,
If I set recovery model SIMPLE then truncation of log files will be
automated , but I will lose
database changes made since the last backup was taken.
Is there any way to automate truncation of log file and
backup of database upto last change has been done????
Plz Help.
I would like to know what happens if i shrink the database with truncate only option and do a full backup or transaction log backup ? are the full backup or transaction log backup valid? I know that the performance of the database is bad if i shrink the database. What happens to full backup or transaction log backups?
View 9 Replies View RelatedHello all - I have a SQL Server 2000 database setup using the Full Recovery Model. Each night, we backup the entire database, and as such would like to truncate the log at this time as well.
Is the best way to do this to also backup the Transaction Log, and then perform a DBCC SHRINKFILE command? It just seems like there should be an easier way...?
Thanks!
I want to truncate my sharepoint config database and WSS_Logging database logs the size of sharepoint_config database is growing at a pace of ~10GB every week. I have scheduled a weekly full backup. Current .ldf file size is 113GB.
I am using SQL server 2012 with Always On High Availability feature. I am not able to set the recovery mode from Full to Simple as it gives me message that mirroring is running on both server.
In my case to reduce the log file what I need to do.
how do i modify this so that it will truncate the log before backup?
SQLMAINT.EXE -D mimi-BkUpDB E:SQLBackups -BkUpMedia DISK -DelBkUps 1 -Rpt E:SQLMaintmimi_maint.rpt
thanks
According to BOL<---BACKUP LOGSpecifies a backup of the transaction log only. The log is backed upfrom the last successfully executed LOG backup to the current end ofthe log. Once the log is backed up, the space may be truncated when nolonger required by replication or active transactions.--->Does this mean I could do something else to truncate the log or is itsaying that the backup log command may truncate the log if it feelslike it?I want ot get a log from a client site onto my server for analysis butI want ot make absolute certain that my backing up the log on theirserver won't truncate it there.
View 7 Replies View RelatedHello
I wanna use backup database task in SSIS to implement SQL statement
BACKUP LOG WITH truncate only.
But in this task, seems that you must at least to choose a location to store backup. No way to just truncate log in SSIS?
any help will be appreciated.
I have been unsuccessful in getting the Backup Log with
No Truncate option to work.
Any tips, tricks, suggestions, etc., would be appreciated.
Thanks!!!
This is a silly question but I am not sure of the answer.
Each day I do a complete DB backup and houly I backup the Translog file with the append mode.
Question Is the Transaction log truncated each time I do a Transaction Log Backup?
how can i truncate logfile (log.LDF) to a smallest posible size?
please help, im running out of hard disk space
Dear experts,
How to truncate a log file?
By taking Full Bacup can we make the log file empty? how can I make an automatic checkpoint?
thank you in advance
Vinod
How do I truncate the log file using TSQL? My client's log file is 44 gig and there isn't enough HD space. Thanks
View 17 Replies View RelatedHi,
I have a database with two log files. I need to truncate one file because it has 40GB.
I tried
Highlight the database-> Tasks->Detach..-> Click OK
Go to log file folder -> rename the testDev_log.ldf to be like testDev_log-aa.ldf,
Highlight Databases->Attach€¦-> Click Add -> add the database testDev, highlight the log file and click the €˜Remove€™ button. This means you only attach testDev.mdf
After this is done, you can verify the contents of the attached database and then delete the log file.but doesn' t work. I read that the problema could be multiple log files, so i tried remove one log file but a get the error that file is not empty.
How can i remove th log file?
Bye
How will I truncate DB log file in SQL 2000?
View 2 Replies View RelatedI would like to allow a particular user to truncate a log file in astored procedure that the user runs every day. At this moment the onlypersonnel that can truncate the log file are personnel with sysadminrights. Is there any way to do this in sql server 2005 withoutgranting this user sysadmin rights (something we REALLY don't want todo)? Thanks for all your help in advance.Dave C.
View 1 Replies View RelatedSQL 2012 Ent SP2
Database is in simple recovery mode, and published with transaction replication push subscription, just one subscriber but the database is huge. I don't want to overwrite the schema at the subscriber either.
I had to run an alter database command on a published database, it created so many logs that an extra drive had to be added along with an extra log file to accommodate all the logs.
The problem I have is I'd like to know clear the file of logs so I can drop the temporary log file, and give the drive back, but I cannot.
I have tried dbcc shrinkfile with the emptyfile option but it never clears, I have also tried it with notruncate and truncateonly options (mainly out of desperation).
I do not need to worry about point in time restore as a full backup is taken before and after the operation. After which the database will be put back into Full recovery mode.
I have looked at log_reuse_wait_desc and the file says 'Replication', so I am now thinking the file cannot empty because replication is keeping one of the VLFs active. I tried dropping and recreating the subscription hoping it might free something up and I could get somewhere, but it made no difference.
Do I have to remove replication completely to get round this? Surely not.
I have also tried putting the database back into full recovery mode, doing a full DB backup, and a transaction log backup, but its made no difference, which is also what makes me think a portion of the log is still active because of replication, and perhaps the transactions have not gone through to the subscriber, which raises another question, why not?
I have not tried restarting SQL server, as I'd like to know a way out of this without having to do that, plus I do not think it would make any difference anyway.
I am using the flat file connection manager. I read in a set of flat files and copy them into a staging database table. I want to ignore anything in the text file past column 266. I can't get this to work correctly. I can't define the last column to end at 266 and ignore the rest. I tried adding an extra column but that did not work either.
Linda
I would like to set up sort of schedule by using FTP to move database back up file from Production server to Staging server every night. Is someone telling me how to do this and any other good way to handle it? I appreciate help!
JQ
The IT shop I work in installed MS-SQL Server last week for the solepurpose of converting a large MS-SQL Server database to a format thatInformix (our main database engine) can read. MSSQL Server installedperfectly, I can view/manipulate the little "Northwind" sampledatabase, back it up to a file, restore it (Microsoft Tape Format) justfine. But... The MSSQL Server "backup" file they sent me that I needto restore is in a format that I'm unfamiliar with. It is a large*.sqb file and when I try to restore (using Enterprise Manager - Rightclick on "empty" database, choose All Tasks, Restore Database - FromDevice, Point to File - I get the message: File is not a validMicrosoft Tape Format backup set.Looking at my little Northwind backup file in a hex editor I see thecharacters "TAPE" as the first 4 characters of the file. Looking atthe file that I'm unsuccessfully trying to restore in a hex editor Isee "SSBE". It's not in the standard "Microsoft Tape Format"apparently, but does anyone have any clue what might have created thisbackup file? I hope it's not some weird proprietary program! Anyhelp appreciated, thanks...Joe
View 1 Replies View RelatedHi Dear,
May Any one guide me?
I have a backup file of database which is in SQL Server 2000. it has no Extension.I want to restore this backupfile or this database in my SQL Server 2005.
I have tried to Attach Database or attach this backup file in Sql Server2005 but it also fails .
First I have created New database name as is on the backupfile and then I have also tried to rename this file with .bak extension and then try to restore again it fails.
Plese Guide me urgently........
:eek: :eek: :eek: :eek: :eek:
Using SQL Server 2005 Server Management Studio, I attempted to back up a database, and received this error:
Backup failed: System.Data.SqlClient.SqlError: Backup and file manipulation operations (such as ALTER DATABASE ADD FILE) on a database must be serialized. Reissue the satement after the current backup or file manipulation is completed (Microsoft.SqlServer.Smo)
Program location:
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)
Backup Options were set to:
Back up to the existing media set
Overwrite all existing backup sets
I am fairly new to SQL 2005. Can someone help me get past this issue? What other information do I need to provide?
Anyone familiar w/ a utility/procedure which will allow me to:
LOAD a Sybase backup file (containing mulitple tables - tblA, tblB, tblC, etc) into a SQL Server database (tblA, tblB, tblC, etc)
Can DTS use a SYBASE backup file as input? (please elaborate)
(DB2 allows you to exec a LOAD utility using a backup file as input)
thx in advance,
BT
Hello,
I have a user database which has 1 data file and 1 logfile.
I did a complete backup of the database to a file on the disk drive, using Enterprise manager. Due to some reason, I had to drop the database. The only way I could restore it was by,
1. Create the database with the same name.
2. Restore the complete backup from the file device.
While doing so,
I get the message "Backup set holds the backup of daatabase other than the existing 'userdbname' database. BAckup terminating."
Is it because the database was dropped and recreated.
If I choose the option to overwrite, it restores successfully.
Is this normal and right way to do it? Is there any thing else that I need to take care of, while backup or restore?
Any suggestions welcome.
Thanks,
MMS
I need to restore a backup file which resites on a network share to my local Sql70 server. Is it possible to restore a database from a backup file on the network share? Thanks!
View 3 Replies View RelatedI have accidentally taken the backup of a database twice into same .bak file. Now the file is twice the size. Will it be fine if I restore this backup? Or will I screw up any data?
View 1 Replies View RelatedHi all,
I'm using shared sql space on a new provider and am trying to import a database backup file - of the format filename.db.
I cannot figure out how to import this file type using the 2005 express tools - I can connect to the database and create and drop tables alright, but I cannot just import the existing database.
I really haven't got the time on my connection to download the fully blown SQL server trial to be able to do this, so can anyone help me out with any easier solutions?
Cheers, Mike
Hi all,
I'm using shared sql space on a new provider and am trying to import a database backup file - of the format filename.db.
I cannot figure out how to import this file type using the 2005 express tools - I can connect to the database and create and drop tables alright, but I cannot just import the existing database.
I really haven't got the time on my connection to download the fully blown SQL server trail to be able to do this, so can anyone help me out with any easier solutions?
Cheers, Mike
Dear all,
What I want to do is to backup my database through the SQL script, when the backup is successful, the .bak file is saved in my local harddisk. After that, I used the XYRunProc to execute a "copy" command to copy the .bak file to a remote server.
However, when I want to restore the database using the .bak on the remote server, I found that the .bak is corrupted. This problem does not exist if the file is copied to the remote server manually (click copy on local server and click paste on remote server).
Do anyone know what's the problem of this? This really made me very frustrated. Hope someone can help me, thank you very much!
Regards,
Strike
What is the difference between "Files aned File Groups" backup and Partial Backup?
Looks like both are same.. Please comment.
Hi everybody,
On executing the RESTORE command of SQL Server to restore from a backup of 78.3 MB, the "Server Application Unavailable" error message comes up.The error message in the Application log is as follows:aspnet_wp.exe (PID: 2184) was recycled because memory consumption exceeded the 152 MB (60 percent of available RAM).
However using Query Analyser of SQL Server I am able to restore the database.
What is the solution to this problem?
Where can I find info about how to backup Sql Server 2005 using a .bat file?
Is it possible doing it this way?
If so, can anyone direct me to some links how how to do this?
If not possible using a bat file... then how can I make schedueled backups? What tool to use and hopefully free.
I am getting following error:
"The log in this backup set terminates at LSN 9566000024284900001, which is too early to apply to the database. A more recent log backup that includes LSN 986000002731000001 can be restored."
If I am missing to restore previous log backup file, how to find which LSN mapped to which log backup file (.trn file name)? Another word looking at LSN can we tell which log backup file is missing?
easy way to compress backup file. I use SQL Server 2008 R2
View 4 Replies View Related