SQL Server Network Overhead
Mar 20, 2007
Hi
I have been doing some testing with SQL Server 2000 using a packet sniffer, and have found that it is sending bytes with a value of 0x00 between each "valid" character. For example, if it was going to send "hello" over the network, it would be transmitted as "h.e.l.l.o".
Can anybody suggest why this might be. It happens regardless of what client is used - ADO.NET, osql.exe, etc. Is it something to do with the encoding used?
Everything does work fine and the data is received intact, but if these seemingly redundant bytes could be removed then it would increase performance by 100%.
Thanks
View 1 Replies
ADVERTISEMENT
Jul 23, 2005
I would like to capture about 20 rows from the sysperfinfo table every30 secs on a production server. I am thinking of ways I can reduce thedisk (not network) I/O overhead of this process. Instead of readingthe table from a local SQL Agent job and writing to a local table, I amwondering if I should create the job to capture the data from a remote(less critical) server. The servers are connecting via a gigabit lineand are in the same server room on the same switch. This way theproduction server would be required to do the reads but the otherserver could take care of the I/O of the writes to the capture table.Also, this job would run from 7am to 7pm non-stop. A waitfor delay of30 seconds would control the twice a min scheduling. Running this onthe remote server would free up a few SQL Agent CPU cycles as well.This would be one less job for the production server to worry about.Thanks
View 1 Replies
View Related
Jun 10, 2015
I've been asked to put together an estimation for the performance impact that replication would have on our database server during a particular operation. I know that this depends on a lot of different factors, including:
* Number of articles being replicated
* Types of articles being replicated
* Number of DML transactions that would result in delivery of replicated data
Any way to turn this into a meaningful metric?
View 0 Replies
View Related
Jul 28, 2007
Hi all,
What is client network and server network alias in SQL server.
when and why we should use that mean what is the requirement of ALIAS in SQL Server.
Thanks
View 5 Replies
View Related
Oct 16, 2007
hi,Is it over head to use SqlTransaction(begin, commit, rollback) for a single transaction.am not using application block or enterprise library.only a single insert statement.
View 3 Replies
View Related
Feb 28, 2005
As part of dealing with a locking problem I am fine tuning a stored procedure
that updates a table. The application updates a row by changing every single column except for the primary key, whether 1 or all of the columns have
been modified. Although easier to code, this strikes me as taking a sledge hammer to a nut.
Could anyone tell me if there is any benefit in attempting to break this down. That is, code the stored procedure so that only those columns being changed are modified. I am thinking this might reduce dramatically the overhead of writing to the transaction log and making the changes to the actual row.If the benefit is non existant (or insignificant) because of the way Sql Server updates a row it will obviously be a waste of time to generate
dynamic sql.
Thanks
View 2 Replies
View Related
Aug 19, 2007
Hey I need to know the overhead associated with SQL Server tables?
And what the overhead is comprised of ,would also be helpful.
Please
View 14 Replies
View Related
Jun 7, 2007
Does anyone have any information I can look at that may show me what resource overhead I may see by using encryption in SS2K5?
I am interested in memory consumption and other metrics of that nature when encrypting and decrypting data.
Especially when you have several hundred to several thousand connections.
Thanks ALL!
View 1 Replies
View Related
Jun 6, 2001
Does anyone have any benchmarks for the amount of overhead caused by autoshrink of the log and having autostats enabled? We have a customer that insists that turning off these options was necessary to eliminate a performance problem they were having (Query timeouts), but we are not convinced that these two options would have generated enough overhead to have been the root cause (they also rebuilt all their indexes and made some other unspecified changes that more likely solved the problem).
We are hestitant to have them continue with these options disabled because then we need to rely on them to keep the log file shrunk and the statistics updated and because of the data changes during the day, would prefer to have stats updated automatically rather than on a fixed schedule that may not be as appropriate.
Anyway, if anyone has any feedback on overhead generated and potential performance implications of having either of these options enabled, it would be greatly appreciated.
Thanks,
Ray Rankins
View 2 Replies
View Related
Feb 10, 2005
Hope somebody can give me some advice .
We are having some issues with temporary tables (with # prefixes) within Stored Procedures.
When running a profile trace on them, the stored proc quite happily creates the temp # table (in fact several of them) but whenever it hits the first statement inserting data into one of them (and it doesn't matter which one), there is a 5-6 second delay.
By commenting out one and moving to the next piece of code, the same thing happens.
Following which, the rest of the Stored Prco runs fine and subsequent inserts into the # temp tables also run efficiently.
Is the stored proc getting recompiled perhaps ?
Any advice woul;d be appreciated.
we are running SQL Server 7.0, dont know whether that helps ?
View 1 Replies
View Related
Nov 6, 2015
We are going to apply CDC on one database.
CDC is creating additional tables under System tables.
What is the performance overhead on the database by creating these tables?
I am going to access the CDC records through one ETL tool. Once read the data I am going to delete the records.
If frequency of changes are more once reading the data there may be few records will be added to the CDC. Is CDC is going to truncate the tables or only read records?
View 0 Replies
View Related
Oct 29, 2007
I am a developer, and I have a disagreement with my DBA. He has convinced management, that SQL 2005 FullText Index is so much overhead on production, that it should NEVER be used under any circumstances. We have a Cold Fusion site, and somehow he convinced management that a bunch of Cold Fusion developers can create a more efficient full text indexing method than by using SQL 2005 Full Text Index. So now we have to come up with a method for doing this in Cold Fusion.
Is there any statistical data that could possible support or refute his statements?
Thanks
View 5 Replies
View Related
Jul 9, 2007
Does anyone have any specific performance information using AES or other encryption schemes supported by SQL Server 2005?
- What method did you find works best?
- Did you encrypt any XML Data?
- Did you encrypt specific columns or whole tables?
Thanks,
Michael
View 1 Replies
View Related
Sep 30, 2004
Hello all,
We have a Windows 2003 Web Edition server serving a site through IIS. It connects to a Windows 2003 Standard Edition server running SQL 2000 SP3a.
This site receives the following error as seen in the topic:
[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
We've configured the server network utility to only allow TCP/IP connections. The connection string for the site is as follows:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
MM_connSpankMSSQL_STRING = "Provider=sqloledb;Data Source=SERVER_IP,1433;Network Library=DBMSSOCN;Initial Catalog=ourmaindb_1;User ID=ourmaindb_1;Password=hotcookies;"
%>
Any ideas or tips on solving this issue? We've noticed it is due to larger queries as smaller ones do work with no problems.
The servers are behind a BSD box running iptables, has 1433,1434 along with standard web ports wide open. Anything outbound is allowed.
Some further testing via ODBC on the IIS server improved things. No more connection pooling for the SQL Server driver allows for 1/3 of the query to run. Still 2/3s of it doesn't show up, and that general network error message appears.
Should have 330 rows if it works right.
View 2 Replies
View Related
May 19, 2004
Hi
While running a DTS, many times the error message: "[DBNETLIB][ConnetionWrite (WrapperWrite()).]General network error. Check your network documentation." appears.
Does somebody knows why?
I am running the DTS from a computer (not the server where the DTS is stored) and it is connected without any problem when this happens.
Thanks!!
Regards
Lautaro - Argentina.
View 4 Replies
View Related
Oct 4, 2007
Hi Every one,
I am using .Net 1.1 for my web application.
And my database server is SQL Server 2005.
My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,
General Network Error. Check your network documentation
I have also searched many articles and tried following solutions but nothing working
- connectiontimeout = 0, max pool size = 7500/100, pooling = false
- SSL disabling enforce security false as mentioned in microsoft kb article.
And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string)
Can any one please help me to solve this error?
With Regards,
View 3 Replies
View Related
May 26, 2007
Hi We have a written a error log in Global.asax. which capture below mentioned error in the prodcution server. Same applications is working fine in some locations and some loactions we are getting the error.Any body knows why this error is occurs.Any body knows why this error is occurs. Error Message:General network error. Check your network documentation.Stack Trace: at System.Data.SqlClient.SqlInternalConnection.OpenAndLogin() at System.Data.SqlClient.SqlInternalConnection..ctor(SqlConnection connection, SqlConnectionString connectionOptions) at System.Data.SqlClient.SqlConnection.Open() at datalayer.sqldb.Execute(String ProcedureName, SqlParameter[] Parameters) at lms.User.GetUserDetails(String strUserid)ITs at LMS.Login.w_btn_Login_Click(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
View 2 Replies
View Related
Oct 4, 2007
Hi,I am using .Net 1.1 for my web application.And my database server is SQL Server 2005. My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,General Network Error. Check your network documentation I have also searched many articles and tried following solutions but nothing working- connectiontimeout = 0, max pool size = 7500/100, pooling = false- SSL disabling enforce security false as mentioned in microsoft kb article. And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string) Can any one please help me to solve this error?
View 2 Replies
View Related
Feb 8, 2004
When I try to update the site setting, I get this Error and I don't know how to fix.
Server Error in '/DotNetNuke' Application.
--------------------------------------------------------------------------------
General network error. Check your network documentation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation.
Source Error:
Line 281:
Line 282: myConnection.Open()
Line 283: myCommand.ExecuteNonQuery()
Line 284: myConnection.Close()
Line 285: End Sub
Source File: C:DotNetNukeComponentsAdminDB.vb Line: 283
Stack Trace:
[SqlException: General network error. Check your network documentation.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +721
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +196
DotNetNuke.AdminDB.UpdatePortalInfo(Int32 PortalId, String PortalName, String PortalAlias, String LogoFile, String FooterText, Int32 UserRegistration, Int32 BannerAdvertising, String Currency, Int32 AdministratorId, String ExpiryDate, Double HostFee, Double HostSpace, String PaymentProcessor, String ProcessorUserId, String ProcessorPassword, String Description, String KeyWords, String BackgroundFile, Int32 SiteLogHistory) in C:DotNetNukeComponentsAdminDB.vb:283
DotNetNuke.SiteSettings.Update_Click(Object sender, EventArgs e) in C:DotNetNukeadminPortalSiteSettings.ascx.vb:287
System.Web.UI.WebControls.LinkButton.OnClick(EventArgs e)
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain()
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
Please Help!
Thank you,
dlouanis
View 2 Replies
View Related
Jan 9, 2006
I use sqlclient to connect directly from my mobile 5 pocketpc to a sql server 2005 database on my desktop.
I use a sqldatareader to traverse the results of a query that delivers 2 fields: (1) the filespec, and (2) the image field.
I use a filestream with a binary writer to write the contents of the image data to the pocketpc's storage card.
I have a test table with 10 images, not one more than 4 MB. I cannot complete a test run prior to receiving the general network error.
The pocketPC is connected via activesync to the desktop, and I connect to the database with:
Integrated Security=false;
user id=sa
password=admin.
Any help with this strange error would be greatly appreciated.
Wil
View 5 Replies
View Related
Oct 11, 2006
Hi I get a "General Network Error Check network documentation" error sometimes, but its only while insert or update statements are fired while selects keep working perfectly.
The Error details are as follows:
General network error. Check your network documentation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException: General network error. Check your network documentation.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream)
View 1 Replies
View Related
Dec 10, 2007
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 3 Replies
View Related
Mar 7, 2006
Hi All, first post.
I have done a bit of searching around and cant find a clear answer to this question.
Current Setup
Desktop application (c#) that connects to a SQL Server 2005 express database on the same local network as the application (currently 3 users)
It is only a very small company and has just taken on their first remote worker, but expects to take on another 6-8 over the next few months. They have asked for the database to be moved online.
The application was written in such a way that everything has been done using no stored procs, or views, it is all native SQL.
This will be my first DB hosted online and before I go ahead and do anything I just wanted to make sure what I have to do is correct, sorry if this is a very basic question, although I have been programming for a long time, I have never had the chance to do any online databases before.
Will this work.
1.Find a SQL Server 2005 Hosting company.
2.Move the database to the server.
3.Setup the users permissions.
3.Alter the connection string in the application to point to the new location.
So the only thing that would change would be a new connection string in the application preferences?
Or am I living in a dream world, because nothing is ever that simple.
One thing I am worried about is the security/visiblity of the database and data as it travels from the server to the client and back.
Thanks for any advise you can give.
Mark
View 2 Replies
View Related
Apr 22, 2008
Hi all,
I am having seriuos problems getting VoIP traffic into and out of my network via the ISA server which we just newly installed.
My network topology is such that the phones i am using for the VoIP service, sitting inside my network and behind the ISA server, have to register to some remote proxy server outside my network and as soon as it registers i can begin using the service. The VoIP service is on the platform of SIP and uses udp ports 5060 and 8080.
I have permitted the necessary ports on the ISA server for the service being UDP port 5060 and 8080 but still cannot get my VoIp traffic through the server.
Please i need some help here as regards something i am supposed to do or something i am not doing right on the ISA server to permit my traffic.
I am a newbie to this Microsoft ISA server and i hope you all understand
Thanks in anticipation to your replies.
Leonard.
View 1 Replies
View Related
Aug 16, 2005
Hi,I am getting the following error (When i am trying to update the column thru windows service) Please let me know the solution for the following.The following error is comming only when i set CommandTimeout to infinity (Commandtimeout=0).General network error. Check your network documentation. Number 11 Procedure ConnectionRead (recv()). Class 20 State 0 Source .Net SqlClient Data Provider Server Line number 0 Thanks and Best RegardsNagaraju A
View 2 Replies
View Related
Nov 15, 2006
Hello
I am new to .net and asp.net. On my local network i have our accounting system using sql 2005 and also a have an access database. We need to get this data to our web site sql 2005 database which is not connected to our network. Can somebody advise me on which would be the best and most secure way? Should i use Web Services to communicate between the network and the web server or use some other method like FTP, smtp?
Thanks in advance for any help
View 4 Replies
View Related
Nov 24, 2003
Can anybody enlighten me how SQL Server (7.0 or 2000)to bound itself to Network name and IP in DNS? (My question is about server level Name/IP matching rather than Client Network Utility setting).
Is there any registry in Window level to manage it? Is there any published article about this topic?
Thank you very much
Mary
View 1 Replies
View Related
May 29, 2006
Hi, I just installed SQL Server 2005 on Windows Server 2003 (Act as DNS and DHCP server for the network). When I tried to access it from my workstation (Windows XP Pro), using SQL Server Management Studio, theres no list of Network Server available. Anything that I should configure first?
View 6 Replies
View Related
Apr 16, 2008
Hello all,
I have 2 networked PC's both running vista ultimate
1st is Laptop and is running its own SQL Server at laptoplaptopSQL
2nd is Desktop and is running its own SQL Server at desktopdesktopSQL
Now both machines have seperate windows login accounts.
When I go SQL Server management studio I go to browse and each machine can see the other machines SQL Server, but when I go to login I get SQL Login falied for users" The user is not associaed with a trusted SQL server connection".
So I then go to logins new login and try to add my other pc's user account.
The problem I see is that when I go to search and then location it only shows its own PC's location and not the location of my other networked pc? So if I am on Desktop and in my theory want to add laptopuser to the desktop SQL Server logins I get:
"create failed for login laptopuser
An exception occurred while executing Transact SQL statement laptopuser is not a valid windows NT name. give the complete name
Not sure on where to go from here.
Any help would be great
View 10 Replies
View Related
Jul 20, 2005
I am trying to connect a new LBM Laptop to an SQL server on thenetworkand I get "test connection failed because of an error in initializingprovider, [dbnetlib][connectionopren(connect()),] SQL server does notexist or access denied. The laptom has sql server running on itlocally and I am trying to connect to an SQL server on the network.ThanksTom
View 1 Replies
View Related
Jan 13, 2006
Hi everyone,
Can anyone tell me the basic difference between Client Network Utility and Server Network Utility and also when to use what..?????
View 1 Replies
View Related
Mar 23, 1999
Hello,
I want to schedule an automated nightly backup of a database to another server on the network (backing up a 6.5 database on Server3 to Server5). File sharing is turned on for Server5 with all permissions, so that shouldn't be a problem. Server 3 sees the Server5 backup location fine from the NT Explorer, proving the two servers are talking to each other okay. Both servers have an NT account called SQLServer with the same name and password and full administrative privileges, which Server3's SQL Executive service uses to log on with (SQL Server is not installed on Server5).
When I try to back up to Server5 (whether to Server5DDRIVETBBackupDailyTimeAndBilling.dat or to a mapped drive F:TBBackupDailyTimeAndBilling.dat) an error message is returned saying "[SQL Server] Can't open dump device 'Server5DDRIVETBBackupDailyTimeAndBilling.dat' , device error or device off line. Please consult the SQL Server error log for more details." The error log says "Backup device 'Server5DDRIVETBBackupDailyTimeAndBilling.dat' failed to open, operating system error = 5(Access is denied.)"
Any help would be greatly appreciated.
Regards,
Karl Simanonok
Professional Presence Providers, Inc.
View 4 Replies
View Related
Sep 5, 2001
Has anyone experienced timeouts connecting to SQL 2K from a client and also the server console itself. Typically this error occurs on the client: Microsoft OLE DB Provider for SQL Server error `80040e14`
OLE/DB provider returned message: Timeout expired
conn_info.asp, line 444
View 1 Replies
View Related
