SQL Statement To Compare And Return One Aggregated Value
Oct 18, 2006
Hello,
In my table, I have two columns - ForecastSales and ActualSales. I need
to write a query that returns me just one aggregate value (one row and
one column). If sum(ActualSales - ForecastSales) is negative, I need to
return "red." Otherwise, I need to return green.
I looked at CASE statement. However, I could not figure out an
efficient way to build this query. I would appreciate your help.
I'm trying to create a report that's based on a SQL-2005 Stored Procedure.
I added the Report Designer, a Report dataset ( based on a shared datasource).
When I try to build the project in BIDS, I get an error. The error occurs three times, once for each parameter on the stored procedure.
I'll only reproduce one instance of the error for the sake of brevity.
[rsCompilerErrorInExpression] The Value expression for the query parameter 'UserID' contains an error : [BC30654] 'Return' statement in a Function, Get, or Operator must return a value.
I've searched on this error and it looks like it's a Visual Basic error :
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
The fields in the table are: inventory_id warehouse_id item_id slot qty on_hand_qty
The support tables are the item table and the warehouse table
I am trying to create a report showing the inventory of items of warehouse_id 1 with warehouse_id 2. If there is no inventory for either warehouse then suppress it. That in itself isn't that hard to do, but I would like to put them side by side, and that I'm having a hard time with.
I hope i didn't confuse the question, and any help would be greatly appreciated!
Hi Guys, I have a table "HOLIDAY" with column "HOLIDAYSTART" and "HOLIDAYEND" in date/time type.User can apply new holiday on a form with value "STARTDATE" and "ENDDATE", but how do I check if the new holiday dates already exist in the table?? I looked around and found you can use something similar to following to check for single date,select * from holiday where ('1-12-2007' >= HOLIDAYSTART) AND ('1-12-2007' <= HOLIDAYEND) but how would I do it with my situation above with between 2 dates? any help? Thanks in advance.
Been pulling my hair out with this one for some time now ... hope someone out there can help :)
I have a database view which is an aggregated view of a number of tables. Trouble is I need to create what would effectively be a primary key for the view.
Can anyone suggest a sound way of doing this other than moving to Oracle :)
The above report has an Op Bal column which is the sum of all amount in Period 01 in Year 2005 carried forward as opening balance in Period 02, Period_Dr Column would contain all positive amount in Period 02 & Period_Cr Column would contain all negative amount in Period 02. Period Bal is the summation of both Period_Dr & Period_Cr and Closing Bal column is the summation of Op Bal + Period Bal.
Guys, hope someone out there can help me with the sql command for the above report?
the query below (from Adventure Works) displays the sales amount for three products and a custom member "aggregation" which is the aggregate of these three products, and it cross joins with the attribute "colour".
Code Snippet
with member [Product].[Product Categories].[Subcategory].&[31].[aggregation] as 'AGGREGATE({ [Product].[Product Categories].[Product].&[214], [Product].[Product Categories].[Product].&[215], [Product].[Product Categories].[Product].&[220] })'
SELECT { [Date].[Calendar].[All Periods] } ON COLUMNS ,
Can someone please explain me why I'm getting this result:
All Periods
Sport-100 Helmet, Red Red 39328.1586
Sport-100 Helmet, Black Black 12098.0788
Sport-100 Helmet, Blue Blue 13331.5816
aggregation Black 64757.819
aggregation Blue 64757.819
aggregation Red 64757.819 (note that 64757.819 is the total of the three products)
instead of something like this:
All Periods
Sport-100 Helmet, Red Red 39328.1586
Sport-100 Helmet, Black Black 12098.0788
Sport-100 Helmet, Blue Blue 13331.5816
aggregation Black 12098.0788
aggregation Blue 13331.5816
aggregation Red 39328.1586
and also if anyone knows of a possible way of getting the second type of result?
please note that if I create a custom member that aggregates members of any other level of the Product Category hierarchy, the problem doesn't exist (see code and results below)
Code Snippet WITH MEMBER [Product].[Product Categories].[Category].&[4].[Aggregation] as 'AGGREGATE({ [Product].[Product Categories].[Subcategory].&[31], [Product].[Product Categories].[Subcategory].&[32] })' SELECT { [Date].[Calendar].DEFAULTMEMBER } ON COLUMNS , NON EMPTY { { { [Product].[Product Categories].[Subcategory].&[31], [Product].[Product Categories].[Subcategory].&[32], [Product].[Product Categories].[Category].&[4].[Aggregation]} * { [Product].[Color].[All Products].CHILDREN } } } ON ROWS FROM [Adventure Works] WHERE ( [Measures].[Reseller Sales Amount] )
I'd like to have all distinct recordIDs with relevant text associated with them. Each record has 3 text boxes in different languages. Each text in different language is defined by an AttributeDefinitionID. This is my query:
Select a.entryID, g.GroupName, c.CategoryName as ExperienceType, e.AttributeValue as EnglishWording, e1.AttributeValue as GermanWording, e2.AttributeValue as RussianWording, From Entry as a inner join entrycategory as b on b.entryid = a.entryid
[Code] ....
but in the results I get additional rows for each record even if the record doesnt have all three text boxes populated and there is only EnglishText for example.
EntryID GrouPName EnglishWording GermanWording RussianWording 1586 Red abc NULL NULL 1586 Red NULL NULL NULL 3566 Yellow NULL Hallo Welt NULL 3566 Yellow NULL NULL NULL 3566 Yellow Hello world NULL NULL 3566 Yellow Hello world Hallo Welt NULL
1586 should only return the first line with English wording. 3566 should return the last line that shows both English and German wording populated
I have a question about how to best make a comparison of two aggregated SELECT€™s. I'm using SQL Server 2005 on a Windows XP machine.
I€™m doing a comparison between donor/gift information from one table and donor/gift information from another table. I have a difference of 7 records/gifts between the two tables. For whatever reason one table is supposedly Header level data and the other is Line level data and they are supposed to have the same number of records/gifts (not an issue here).
The aggregated SELECT€™s, which will show the donor and the number of gifts each made, are listed below:
SELECT [Account Number] ,count(*) as [Count] FROM Zk_HeaderMulti GROUP BY [Account Number]
--
SELECT [Account Number] ,count(*) as [Count] FROM Zk_LineMulti GROUP BY [Account Number]
Is there a more efficient way to do this than the below listed method in which I use temp tables, join them and find the donor(s) with differing number of gifts between the header table and the line table?
=================================================
SELECT [Account Number] as Line_Donor ,count(*) as LineGift_Num INTO #Line FROM Zk_LineMulti GROUP BY [Account Number]
--
SELECT [Account Number] as Head_Donor ,count(*) as HeadGift_Num INTO #Header FROM Zk_HeaderMulti GROUP BY [Account Number]
--
SELECT Line_Donor ,LineGift_Num ,Head_Donor ,HeadGift_Num FROM #Line A JOIN #Header Z ON a.Line_Donor=z.Head_Donor WHERE LineGift_Num<>HeadGift_Num
a record value instead of aggregated value with GROUP BY?
Assume that I have a PRODUCT_COMMENT table defined as below. It logs the multiple comments for products. A product may have multiple comments logged at different time.
Code Block
CREATE TABLE [dbo].[PRODUCT_COMMENT]( [COMMENT_ID] [int] IDENTITY(1,1) NOT NULL, [PRODUCT_ID] [int] NOT NULL, [COMMENT] [nvarchar](50) NULL, [UPDATED_ON] [datetime] NOT NULL, CONSTRAINT [PK_PRODUCT_COMMENT] PRIMARY KEY CLUSTERED ( [COMMENT_ID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY]
GO ALTER TABLE [dbo].[PRODUCT_COMMENT] WITH CHECK ADD CONSTRAINT [FK_PRODUCT_COMMENT_PRODUCT] FOREIGN KEY([PRODUCT_ID]) REFERENCES [dbo].[PRODUCT] ([PRODUCT_ID]) GO ALTER TABLE [dbo].[PRODUCT_COMMENT] CHECK CONSTRAINT [FK_PRODUCT_COMMENT_PRODUCT]
I would like to use the following SQL statement to get the latest comments for all products.
Code Block
SELECT PRODUCT_ID, COMMENT, UPDATED_ON FROM PRODUCT_COMMENT GROUP BY PRODUCT_ID HAVING UPDATED_ON = MAX(UPDATED_ON)
But this leads to the following error:
Code Block
Column 'PRODUCT_COMMENT.UPDATED_ON' is invalid in the HAVING clause because it is not contained in either an aggregate function or the GROUP BY clause.
I am not sure if I wrote the question's title appropriatly or not.....but anyways I wud try to explain the problem.
I am facing a problem solving the following task in MS Access (I believe it can surely be solved in access or SQL server).I am posting a sample table format here for reference and also postin the expected result table there-after.
The problem goes like this.(Read Carefully)
I have a table which contains a payment history with one row per account (each account number is unique) and related payment history for each account.
where Dt is date and P1/2/3/... is payment.There cud be 1 or more than 1 payments in a particular month as shown.
The original file has more than 200 columns for the payment i.e till Dt200,P200
I need to see aggregated monthly payment history for all accounts. i.e. a table for all accounts with related payments for each month (its OK if a day vary in particular month...consolidation shud be monthly) starting from the earliest to the latest possible.
I hope I have tried to explain the problem in as much detail as possible.
Please help me with your valuable solutions to the above task ASAP.If u want i can also send in as attachment the original file i am workin at to ur email id
I am using MSSQL 2000, SQL Server Developer Edition and product version is : 8.00.760 (SP3)
Application Server: JBoss v 4.0.4 Driver : sql 2005 driver.
Hi,
I am running my application in JBOSS and hibernate to do all the query to the DB. While we are testing our application, it is working fine for the 1st day of stress testing, however after running for one days, it starts throwing the following exception. This can occur in a number of method call with no fixed pattern. Anyone has any idea what is going on?
used by: org.hibernate.exception.GenericJDBCException: could not execute query at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:103) at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:91) at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43) at org.hibernate.loader.Loader.doList(Loader.java:2148) at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2029) at org.hibernate.loader.Loader.list(Loader.java:2024) at org.hibernate.loader.hql.QueryLoader.list(QueryLoader.java:392) at org.hibernate.hql.ast.QueryTranslatorImpl.list(QueryTranslatorImpl.java:333) at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:172) at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1114) at org.hibernate.impl.QueryImpl.list(QueryImpl.java:79) at org.hibernate.impl.AbstractQueryImpl.uniqueResult(AbstractQueryImpl.java:756) at org.hibernate.ejb.QueryImpl.getSingleResult(QueryImpl.java:63) ... 88 more Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set. at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PreparedStatementExecutionRequest.executeStatement(Unknown Source) at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source) at org.jboss.resource.adapter.jdbc.WrappedPreparedStatement.executeQuery(WrappedPreparedStatement.java:236) at org.hibernate.jdbc.AbstractBatcher.getResultSet(AbstractBatcher.java:186) at org.hibernate.loader.Loader.getResultSet(Loader.java:1669) at org.hibernate.loader.Loader.doQuery(Loader.java:662) at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:224) at org.hibernate.loader.Loader.doList(Loader.java:2145) ... 97 more
Hey. I need to substitute a value from a table if the input var is null. This is fine if the value coming from table is not null. But, it the table value is also null, it doesn't work. The problem I'm getting is in the isnull line which is in Dark green color because @inFileVersion is set to null explicitly and when the isnull function evaluates, value returned from DR.FileVersion is also null which is correct. I want the null=null to return true which is why i set ansi_nulls off. But it doesn't return anything. And the select statement should return something but in my case it returns null. If I comment the isnull statements in the where clause, everything works fine. Please tell me what am I doing wrong. Is it possible to do this without setting the ansi_nulls to off??? Thank you
set ansi_nulls off
go
declare
@inFileName VARCHAR (100),
@inFileSize INT,
@Id int,
@inlanguageid INT,
@inFileVersion VARCHAR (100),
@ExeState int
set @inFileName = 'A0006337.EXE'
set @inFileSize = 28796
set @Id= 1
set @inlanguageid =null
set @inFileVersion =NULL
set @ExeState =0
select Dr.StateID from table1 dR
where
DR.[FileName] = @inFileName
AND DR.FileSize =@inFileSize
AND DR.FileVersion = isnull(@inFileVersion,DR.FileVersion)
So, Jimmy G helped me out with it in showing a little bit how to do it. SqlCommand command = new SqlCommand(, object>) SqlParameter param = new SqlParameter(); param.ParameterName = "@return"; param.Direction = ParameterDirection.ReturnValue; command.Parameters.Add(param);
command.ExecuteNonQuery();
//get the return value int val = int.Parse(command.Parameters[0].ToString()); Where I get lost is in the declaring of a new sqlcommand and sqlparameter. Can you please spell out where to use this and if I need to change my SQLdataSource. I currently was trying to use it in the OnClick of a button. What I had did the following Protected Sub CreateIssue_Click(ByVal sender As Object, ByVal e As System.EventArgs) dim returnValue as integer 'how do I get a return value from the stored procedure executed in 'insertissue.insert() here to a variable? InsertIssue.Insert() Response.Redirect("/addarticletoissue") End Sub
again, thank you for your help and patience with such a beginner =)
I'm using MSSQL and PHP. I've got the following sql statement:
$msquery = IF NOT EXISTS (SELECT SerienNr FROM tbl_Auftrag a WHERE a.SerienNr='PC8') INSERT INTO tbl_Auftrag (BMS_AuftragsNr, SerienNr, AuftraggNr, Zieltermin, Kd_Name) VALUES ('455476567','PC8','1','2006-3-2','Fritz')
The Statement itself works fine, but i've got a problem getting a return value whether the insert has succeed, or not. :confused: mssql_query() always returns true if there occured no error in the statement. But i need to know if the insert procedded or not. I tried:
I have some sql and i expect a row back with some information even if there is nothing. What i want to happen is when it returns an empty row then give me a 0 so at least i get something back I am filling a dataset here and it isnt populating the fields when an empty row is returned.
SELECT 3 row_id, '2003' year, 'Mar' period, (SELECT count(*) FROM news WHERE news.id IN ( SELECT news.id FROM news WHERE news.announced_date >= '2003-03-01' AND ........
So ive tried variations of the below in a CASE statement WHEN NUll or WHEN 0 but i still get nothing back. I would like the information to return 3 2003 Mar 0 if its empty.
SELECT 3 row_id, '2003' year, 'Mar' period, (SELECT CASE count(*) WHEN NULL THEN 0 ELSE count(*) END FROM news WHERE news.id IN ( SELECT news.id FROM news WHERE news.announced_date >= '2003-03-01' AND ............
I've been searching and trying out SQL statements for hours and I'mstill having a problem.I'm querying 3 tables... and I only want the first unique recordreturned.Currently, the data returned looks like this..............New York New York ANew York New York BNew York New York CLos Angeles California ALos Angeles California BLos Angeles California CI want the select statement to return this instead...New York New York ALos Angeles California AI'm using MS SQL server.please help?thanks for your help.
I am inserting a record into a table that automatically generatesunique ids (i.e. Primary Key). Is there anyway to return this id. As Iam using this on ASP.net page and I really need the ID to update thepage with the new details.I think on mysql there is something called LAST_INSERT_ID which doesthis.
Can anyone just point me in the right direction. All I want to do is add some T-SQL to an existing stored procedure to return the number of rows selected into a return value.Does anyone know how to do this?
Hello all, I have been working with a DetailsView control for the past week and it is a great control, but also lacks on some departments. Anyhow I need to know what the best approach for this scenerio would be? I have a SqlDataSource" <asp:SqlDataSource ID="SqlUpsertAffiliateDetails" runat="server" ConnectionString="<%$ ConnectionStrings:connectionstring %>" SelectCommand="SELECT am.affiliate_id AS AffiliateId, am.member_id AS MemberId, m.First_Name, m.Last_Name, am.category_id AS CategoryId, ac.category_name, am.profile_web_address AS WebAddress, am.profile_email_1 AS Email, am.comments AS Comments, am.date_modified FROM tAffiliateMaster AS am WITH (NOLOCK) INNER JOIN tAffiliateCategories AS ac WITH (NOLOCK) ON am.category_id = ac.category_id INNER JOIN rapdata..Member AS m WITH (NOLOCK) ON am.member_id = m.Member_Number WHERE (am.affiliate_id = @AffiliateId)" UpdateCommand="spUpsertAffiliateProfile" UpdateCommandType="StoredProcedure"> <SelectParameters> <asp:QueryStringParameter Name="AffiliateId" QueryStringField="affiliate_id" /> </SelectParameters> <UpdateParameters> <asp:Parameter Name="Action" Type="Byte" DefaultValue="2" /> </UpdateParameters> </asp:SqlDataSource> And my SP:/* 09-19-07 Used to update affiliate profile */
CREATE PROCEDURE spUpsertAffiliateProfile @Action tinyint, @AffiliateId int, @MemberId int = -1, @CategoryId int, @WebAddress varchar(50), @Email varchar(50), @Comments varchar(1500) AS
SET NOCOUNT ON
-- Find errors first, check is not needed if deleting IF @Action <> 3 IF NOT EXISTS (SELECT Member_Number FROM rapdata..Member_Association WHERE Member_Number = @MemberId AND Status = 'A' AND Association_ID = 'TRI' AND Bill_Type_Code LIKE '%AF%') BEGIN SELECT retval = 'A qualified member ID was NOT found. Action Failed.', errorcount = 1, 0 AS affiliate_id RETURN END IF @Action = 1 IF EXISTS (SELECT member_id FROM tAffiliateMaster WHERE member_id = @MemberId) BEGIN SELECT retval = 'This member has already been listed. Action Failed.', errorcount = 1, 0 AS affiliate_id RETURN END
IF @Action = 1 AND @AffiliateId = 0-- insert BEGIN INSERT INTO tAffiliateMaster (member_id, category_id, profile_web_address, profile_email_1, comments) VALUES (@MemberId, @CategoryId, @WebAddress, @Email, @Comments)
SELECT retval = 'Record Entered', errorcount = 0, @@IDENTITY AS affiliate_id RETURN END
ELSE IF @Action = 2 AND @AffiliateId > 0-- update BEGIN UPDATE tAffiliateMaster
SET category_id= @CategoryId, profile_web_address=@WebAddress, profile_email_1=@Email, comments=@Comments
WHERE affiliate_id = @AffiliateId AND member_id = @MemberId
SELECT retval = 'Record Updated', errorcount = 0, @AffiliateId AS affiliate_id RETURN END
ELSE IF @Action = 3 AND @AffiliateId > 0-- delete BEGIN DELETE tAffiliateMaster
WHERE affiliate_id = @AffiliateId
SELECT retval = 'Record Deleted', errorcount = 0, 0 AS affiliate_id RETURN END GO
My question is how will I be able to return the retval? Will I need to do it within the code behind of the SqlDataSource Updated Event? Thanks!
We're using this statement to import some values into a database: SQLStatement = "INSERT MyTable (ID, VALUE) VALUES ('" & IDString & "', '" & VALUEString & "')"
The problem is that the strings might contain carriage returns/line feeds, i.e. VALUEString = "Line 1." & vbCrLf & "Line 2."
It only imports up until the first vbCrLf. We have tried replacing vbCrLf with "", but this doesn't work either. What is the correct format for inserting a value that contains new line characters?
ALTER PROCEDURE [dbo].[sp_SelectMostRecentArticle]
AS BEGIN
DECLARE @article_id INT SELECT @article_id = ( SELECT TOP 1 article_id FROM article ORDER BY article_id DESC )
DECLARE @comment_count INT SELECT @comment_count = ( SELECT COUNT(comment_id) FROM comment JOIN article ON article_id = comment_article_id GROUP BY article_id HAVING article_id = @article_id )
SELECT TOP 1 article_id, article_author_id, article_title, article_body, article_post_date, article_edit_date, article_status, article_author_id article_author_ip, author_display_name, category_id, category_name--, comment_count AS @comment_count
FROM article
JOIN author ON author_id = article_author_id JOIN category ON category_id = article_category_id
GROUP BY article_id, article_title, article_body, article_post_date, article_edit_date, article_status, article_author_ip,article_author_id, author_display_name, category_id, category_name
HAVING article_id = @article_id
END GO
as you can see, im trying to return a comment_count value, but the only way I can do this is by defining the variable.
I have had to do it this way, because I cannot say COUNT(comment.comment_id) AS comment_count or it returns an error that it cant reference the comment.comment_id.
But when change it to FROM article, comment; I get errors about the article_author_id and article_comment_id.
And i cant add a join, because it would return the amount of rows of the comment...
unless someone could help with what i Just decribed (as i would prefer to do it this way), how would i return the variable value as part of the select statement?
I'm trying to migrate to the 2005 JDBC driver against SQL Server 2000, but I'm getting the following exception: com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set. This is similar problem to a past thread: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=413019&SiteID=1 The difference is that my stored procedure uses cursors. This same stored procedure works fine with the 2000 JDBC driver.
Does anybody have any ideas how to resolve this problem?
So, really the key is the PROJID & the ACTIVITY_NAME (really, there's a unique column ID, but for this question, I'll leave it at that).
(Though this should be much easier to accomplish in code, the system is not built that way so) Is there a good way that I could return a status for a given PROJID based on whether a row exists for a given PROJID). In other words, ultimately, I would like to return something like this:
where the activity order (in this case) is Prepro, QA, Delivery. So because a Delivery row exists for PROJID 2, then the LAST_ACTIVITY would return "Delivery" and because only Prepro exists for PROJID 1, the LAST_ACTIVITY returned would be Prepro
If I try to run the code below, and even one of the values in the INNER JOIN statements is NULL, the DataReader ends up with zero rows. What I need is to see the results even if one or more of INNER JOIN statements has a NULL value. For example, if I want info on asset# 2104, and there's no value in the DriverID field, I need the rest of the data to display and just have the lblDriverName by blank. Is that possible?
<code> Sub BindSearchGrid() Dim searchUnitID As String Dim searchQuery As String searchUnitID = tbSearchUnitID.Text lblIDNum.Text = searchUnitID searchQuery = "SELECT * FROM Assets " & _ "INNER JOIN Condition ON Condition.ConditionID = Assets.ConditionID " & _ "INNER JOIN Drivers ON Drivers.DriverID = Assets.DriverID " & _ "INNER JOIN Departments ON Departments.DepartmentID = Assets.DepartmentID " & _ "INNER JOIN AssetCategories ON AssetCategories.AssetCategoryID = Assets.AssetCategoryID " & _ "INNER JOIN Store ON Store.[Store ID] = Assets.StoreID WHERE RTRIM(Assets.[Unit ID]) = '" & searchUnitID & "'"
Dim myReader As SqlDataReader myReader = Data.queryDB(searchQuery) While myReader.Read If Not IsDBNull(myReader("Store Name")) Then lblStrID.Text = myReader("Store Name") If Not IsDBNull(myReader("AssetCategory")) Then lblAsstCat.Text = myReader("AssetCategory") If Not IsDBNull(myReader("Condition Description")) Then lblCondID.Text = myReader("Condition Description") If Not IsDBNull(myReader("DepartmentName")) Then lblDepID.Text = myReader("DepartmentName") If Not IsDBNull(myReader("Unit ID")) Then lblUnID.Text = myReader("Unit ID") If Not IsDBNull(myReader("Year")) Then lblYr.Text = myReader("Year") If Not IsDBNull(myReader("Make")) Then lblMk.Text = myReader("Make") If Not IsDBNull(myReader("Model")) Then lblMod.Text = myReader("Model") If Not IsDBNull(myReader("Mileage")) Then lblMile.Text = myReader("Mileage") If Not IsDBNull(myReader("Vin Number")) Then lblVinNum.Text = myReader("Vin Number") If Not IsDBNull(myReader("License Number")) Then lblLicNum.Text = myReader("License Number") If Not IsDBNull(myReader("Name")) Then lblDriverName.Text = myReader("Name") If Not IsDBNull(myReader("DateAcquired")) Then lblDateAcq.Text = myReader("DateAcquired") If Not IsDBNull(myReader("DateSold")) Then lblDtSld.Text = myReader("DateSold") If Not IsDBNull(myReader("PurchasePrice")) Then lblPrPrice.Text = myReader("PurchasePrice") If Not IsDBNull(myReader("NextSchedMaint")) Then lblNSM.Text = myReader("NextSchedMaint") If Not IsDBNull(myReader("GVWR")) Then lblGrVWR.Text = myReader("GVWR") If Not IsDBNull(myReader("GVW")) Then lblGrVW.Text = myReader("GVW") If Not IsDBNull(myReader("Crane Capacity")) Then lblCrCap.Text = myReader("Crane Capacity") If Not IsDBNull(myReader("Crane Certification")) Then lblCrCert.Text = myReader("Crane Certification") If Not IsDBNull(myReader("Repair Cost")) Then lblRepCost.Text = myReader("Repair Cost") If Not IsDBNull(myReader("Estimate Replacement")) Then lblEstRep.Text = myReader("Estimate Replacement") If Not IsDBNull(myReader("SalvageValue")) Then lblSalVal.Text = myReader("SalvageValue") If Not IsDBNull(myReader("CurrentValue")) Then lblCurVal.Text = myReader("CurrentValue") If Not IsDBNull(myReader("Comments")) Then lblCom.Text = myReader("Comments") If Not IsDBNull(myReader("Description")) Then lblDesc.Text = myReader("Description")
