SQL Syntax Question ...simple I'm Sure??

Mar 19, 2006

Hi I have the following statement, where I'm passing any arrayList (as a string) this works fine, however when I add in the "WHERE" section 'AND (Keywords Like ...)' I get the error "Incorrect syntax ner 'tool' ", must have something to do with '%'

Any help would be great. Thanks in advance

DECLARE @Array varchar(50)
SET @Array = '47, 23'
DECLARE @SearchText varchar(50)
SET @SearchText = 'tool'


DECLARE @SQL varchar(700)

SET @SQL =
'
SELECT     *
FROM         ImageGallery_Items
WHERE CategoryID IN (' + @Array + ')
AND ( Keywords LIKE %' + @SearchText  + '%    )
'

EXEC(@SQL)

 

 

View 1 Replies


ADVERTISEMENT

Need Help With Simple Syntax

Feb 24, 2008

I'm new to SQL I don't know how to write code for the following problem:



Attached is the pic of my table. What I would like to do is compare the Open column of 2008-02-22 with the Close column of 2008-02-21.

Then I would like to know if the Open of 2008-02-22 is greater or less than the Close of 2008-02-21.
- If it greater, I would like to know if the Low of 2008-02-22 is ever less than or equal to the close of 2008-02-21.
- But if it is Less, then I would like to know if the High of 2008-02-22 is greater than or equal to the close of 2008-02-21.

The other issues is that the date have to be dynamic of course. I used 2008-02-22 and 2008-02-21 as examples. Ideally it would be the Open Column of Row 1 compared to the Close column of Row 2.

Sorry if I did not explain it properly, this new way of thinking is kinda foreign to me and I may sound like an idiot. Any help would be much appreciated.

View 5 Replies View Related

Simple Syntax Error

May 7, 2008

I'm using sql server 2005 and in sql management studio I am getting a syntax error from this simple below code:
WITH CustListTemp AS
(SELECT OrderID, Locked, OrderStatus, Resubmissions, ROW_NUMBER() OVER (ORDER BY OrderID) AS RowNumber
FROM dbo.OrderInfo
)
 
Can somebody please tell me what ther error is so I can correct it? I even had someone at work take a look at it and couldn't get it either.

View 4 Replies View Related

Simple Loop Syntax

Aug 20, 2002

I rarely use loops, but I have a need right now to create one. Can someone please tell me the proper syntax for creting one. BOL doesn't help much
Thanks!

View 1 Replies View Related

Very Simple Syntax Question

Sep 23, 2006

In advance forgive my ignorance - I'm developing in Access 2003....

I have a query that delivers an accurate dataset - Each church is submitting three proposals which are numbered with their church number (four digits) - their "first choice" has a "-1" after their church number. So church number "1101"'s first choice proposal is "1101-1". Each Church has 3 proposals (1101-1, 1101-2, 1101-3). There are 266 total churches. The proposals are picking other churches as part of the complete record. So each church can pick up to 6 other churches. But the "church of record" is the one at the top of the report. In other words, when I base the report on the query, if the report is about church "1101" I need the query to list Church 1101's 3 records at the top, to then be compared to the grouped (three) proposals from other church's that mentioned 1101 in their proposals.

RIght now the query works fine in that all of the records are accurately filtered into the dataset. So I have 1101's 3 proposals in the query results, along with all other churches that mentioned 1101 - no problem there. Here's where the question comes in. I'm going to give the user an input form to choose which report to run. So the user will pick "1101 St. Mary's" off of a combo box and hit the report button.

In SQL - how do I specify that if the ParishID of the Church (chosen in the combobox) equals 1 to 3 parishID's in the dataset, that those three records should appear at the top of the dataset in ascending order (1101-1, 1101-2, 1101-3) - then the rest of the records should appear ascending by proposal number.

Thanks so much in advance. I didn't include field names or anything because I'm guessing it's some simple SQL standard syntax that I can adapt. I know how to do the runtime connect to the query using the combobox - I'm OK there....

OvernightGeek

View 1 Replies View Related

Ridiculously Simple Syntax Error

Feb 16, 2007

in SQL query analyzer i have this skeleton test query:

DECLARE @nLen int
DECLARE @strData varchar(200)
DECLARE @strDelim varchar(50)
DECLARE @nPos int

SELECT
OwnersName1
= (IF len(OwnersName) > 0 OwnersName
-- IF dbo.InString(OwnersName,'&',1) > 0 'yes'
--if dbo.InString(OwnersName,' AND ',1) > 0 'yes'
--if dbo.InString(OwnersName,', ',2) > 0 'yes'
--ELSE OwnersName
)
,
OwnersName2 = OwnersName
--@strDelim as Delim
FROM dbo.TateWake
WHERE OwnersName>'9'

i get this error:
Server: Msg 156, Level 15, State 1, Line 8
Incorrect syntax near the keyword 'IF'.
Server: Msg 170, Level 15, State 1, Line 8
Line 8: Incorrect syntax near 'OwnersName'.

if i replace
IF len(OwnersName) > 0 OwnersName
with: len(OwnersName)
there is no error.

what the heck is going on?
thanks...

View 2 Replies View Related

Ridiculously Simple Syntax Error

Feb 16, 2007

this is my 3rd attempt at posting this. other attempts did not post for some reason. now i'm home from work and so i can't cut and paste. this is from memory.

in query analyzer, i made a ridiculously simple query which returns a syntax error that i can't resolve:

SELECT name1 =
(
IF len(name) > 0 len(name)
),
name2 = name
FROM ownertable

this gives an error something like:
syntax error near IF on line 3

when i remove the IF len(name) > 0
the expression is evaluated as expected with no error. what is going on?

I must apologize for the simplification, but my posts kept going to the ether for some reason. I have had other dba's look at it and no one knows why this is happening in my office. nor can i understand why my posts don't stick. i even got a message from the forum app that i posted a duplicate message!

View 5 Replies View Related

Simple Simple Linking Tables & Perform Calculation

Mar 22, 2007

found it

View 3 Replies View Related

Simple Question (Hope Simple Answer Too)

May 26, 2004

Hey,

I have MS SQL database.
I have procedure:



code:--------------------------------------------------------------------------------
CREATE PROCEDURE dbo.Reg_DropTable
@ModuleId varchar(10)
AS
declare @TableName varchar, @kiek numeric
set @TableName = 'reg_'+@ModuleId

begin
DROP TABLE @TableName <- HERE I GOT ERROR
end
GO
--------------------------------------------------------------------------------


I got error when using variable with tables names.
How to do this?

Ps. Number is send to this function and it must drop table with name Reg_[That number]

View 1 Replies View Related

Incorrect Syntax Near The Keyword CONVERT When The Syntax Is Correct - Why?

May 20, 2008

Why does the following call to a stored procedure get me this error:


Msg 156, Level 15, State 1, Line 1

Incorrect syntax near the keyword 'CONVERT'.




Code Snippet

EXECUTE OpenInvoiceItemSP_RAM CONVERT(DATETIME,'01-01-2008'), CONVERT(DATETIME,'04/30/2008') , 1,'81350'




The stored procedure accepts two datetime parameters, followed by an INT and a varchar(10) in that order.

I can't find anything wrong in the syntax for CONVERT or any nearby items.


Help me please. Thank you.

View 7 Replies View Related

Incorrect Syntax When There Appears To Be No Syntax Errors.

Dec 14, 2003

I keep receiving the following error whenever I try and call this function to update my database.

The code was working before, all I added was an extra field to update.

Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'WHERE'


Public Sub MasterList_Update(sender As Object, e As DataListCommandEventArgs)

Dim strProjectName, txtProjectDescription, intProjectID, strProjectState as String
Dim intEstDuration, dtmCreationDate, strCreatedBy, strProjectLead, dtmEstCompletionDate as String

strProjectName = CType(e.Item.FindControl("txtProjectName"), TextBox).Text
txtProjectDescription = CType(e.Item.FindControl("txtProjDesc"), TextBox).Text
strProjectState = CType(e.Item.FindControl("txtStatus"), TextBox).Text
intEstDuration = CType(e.Item.FindControl("txtDuration"), TextBox).Text
dtmCreationDate = CType(e.Item.FindControl("txtCreation"),TextBox).Text
strCreatedBy = CType(e.Item.FindControl("txtCreatedBy"),TextBox).Text
strProjectLead = CType(e.Item.FindControl("txtLead"),TextBox).Text
dtmEstCompletionDate = CType(e.Item.FindControl("txtComDate"),TextBox).Text
intProjectID = CType(e.Item.FindControl("lblProjectID"), Label).Text

Dim strSQL As String
strSQL = "Update tblProject " _
& "Set strProjectName = @strProjectName, " _
& "txtProjectDescription = @txtProjectDescription, " _
& "strProjectState = @strProjectState, " _
& "intEstDuration = @intEstDuration, " _
& "dtmCreationDate = @dtmCreationDate, " _
& "strCreatedBy = @strCreatedBy, " _
& "strProjectLead = @strProjectLead, " _
& "dtmEstCompletionDate = @dtmEstCompletionDate, " _
& "WHERE intProjectID = @intProjectID"

Dim myConnection As New SqlConnection(System.Configuration.ConfigurationSettings.AppSettings("connectionstring"))
Dim cmdSQL As New SqlCommand(strSQL, myConnection)

cmdSQL.Parameters.Add(new SqlParameter("@strProjectName", SqlDbType.NVarChar, 40))
cmdSQL.Parameters("@strProjectName").Value = strProjectName
cmdSQL.Parameters.Add(new SqlParameter("@txtProjectDescription", SqlDbType.NVarChar, 30))
cmdSQL.Parameters("@txtProjectDescription").Value = txtProjectDescription
cmdSQL.Parameters.Add(new SqlParameter("@strProjectState", SqlDbType.NVarChar, 30))
cmdSQL.Parameters("@strProjectState").Value = strProjectState
cmdSQL.Parameters.Add(new SqlParameter("@intEstDuration", SqlDbType.NVarChar, 60))
cmdSQL.Parameters("@intEstDuration").Value = intEstDuration
cmdSQL.Parameters.Add(new SqlParameter("@dtmCreationDate", SqlDbType.NVarChar, 15))
cmdSQL.Parameters("@dtmCreationDate").Value = dtmCreationDate
cmdSQL.Parameters.Add(new SqlParameter("@strCreatedBy", SqlDbType.NVarChar, 10))
cmdSQL.Parameters("@strCreatedBy").Value = strCreatedBy
cmdSQL.Parameters.Add(new SqlParameter("@strProjectLead", SqlDbType.NVarChar, 15))
cmdSQL.Parameters("@strProjectLead").Value = strProjectLead
cmdSQL.Parameters.Add(new SqlParameter("@dtmEstCompletionDate", SqlDbType.NVarChar, 24))
cmdSQL.Parameters("@dtmEstCompletionDate").Value = dtmEstCompletionDate
cmdSQL.Parameters.Add(new SqlParameter("@intProjectID", SqlDbType.NChar, 5))
cmdSQL.Parameters("@intProjectID").Value = intProjectID

myConnection.Open()
cmdSQL.ExecuteNonQuery
myConnection.Close()

MasterList.EditItemIndex = -1
BindMasterList()


End Sub

Thankyou in advance.

View 3 Replies View Related

Which Is Faster? Conditional Within JOIN Syntax Or WHERE Syntax?

Mar 31, 2008

Forgive the noob question, but i'm still learning SQL everyday and was wondering which of the following is faster? I'm just gonna post parts of the SELECT statement that i've made changes to:

INNER JOIN Facilities f ON e.Facility = f.FacilityID AND f.Name = @FacilityName

OR

WHERE f.Name = @FacilityName


My question is whether or not the query runs faster if i put the condition within the JOIN line as opposed to putting in the WHERE line? Both ways seems to return the same results but the time difference between methods is staggering? Putting the condition within the JOIN line makes the query run about 3 times faster?

Again, forgive my lack of understanding, but could someone agree or disagree and give me the cliff-notes version of why or why not?

Thanks!

View 4 Replies View Related

Converting Rrom Access Syntax To Sql Syntax

Sep 23, 2007


Ok I am tying to convert access syntax to Sql syntax to put it in a stored procedure or view..
Here is the part that I need to convert:

SELECT [2007_hours].proj_name, [2007_hours].task_name, [2007_hours].Employee,
IIf(Mid([task_name],1,3)='PTO','PTO_Holiday',
IIf(Mid([task_name],1,7)='Holiday','PTO_Holiday',
IIf(Mid([proj_name],1,9) In ('9900-2831','9900-2788'),'II Internal',
IIf(Mid([proj_name],1,9)='9900-2787','Sales',
IIf(Mid([proj_name],1,9)='9910-2799','Sales',
IIf(Mid([proj_name],1,9)='9920-2791','Sales',

)
)
)
)
) AS timeType, Sum([2007_hours].Hours) AS SumOfHours
from................

how can you convert it to sql syntax

I need to have a nested If statment which I can't do in sql (in sql I have to have select and from Together for example ( I can't do this in sql):
select ID, FName, LName
if(SUBSTRING(FirstName, 1, 4)= 'Mike')
Begin
Replace(FirstNam,'Mike','MikeTest')
if(SUBSTRING(LastName, 1, 4)= 'Kong')
Begin
Replace(LastNam,'Kong,'KongTest')
if(SUBSTRING(Address, 1, 4)= '1245')
Begin
.........
End
End

end




Case Statement might be the solution but i could not do it.






Your input will be appreciated

Thank you

View 5 Replies View Related

Simple Join Not So Simple

Feb 21, 2007

I am receiving funny results from a query. To simplify, I have 2 tables (todayyesterday). Each tbl has the same 8 columns. My query joins the two tables then looks where either of two columns has changed. What is happening is that when checking one of the columns it seems as though sql is flipping the column, causing it to be returned in error.

result set

colA colB colC colD colE colF colG colG (from yesterday)
1 1 a b c d e m
1 1 a b c d m e

So what's happening is that the record above is actually the same record and should not be returned. There is a daily pmt column that changes but I am not using that in the query. Aside from that the two records are identicle.

Any help is appreciated.

View 7 Replies View Related

Simple Join Not So Simple

Aug 19, 2006

Hi,

I have the following situation (with a site that already works and i cannot modify the database architecture and following CrossRef tables -- you will see what i mean by CrossRef tables below)

I have:


Master table Hotel

table AddressCrossRef (with: RefID = Hotel.ID, RefType = 'Hotel', AddrID)
joins
table Address (key = AddrID)


table MediaCrossRef (with RefID = Hotel.ID, RefType= 'Hotel', MediaID)
joins
table Media (with MediaID,mediaType = 'thumbnail')


foreach hotel, there definitely is a crossRef entry in AddressCrossRef and Address tables respectively (since every hotel has an address)

however not all hotels have thumbnail image

hence i have hotel inner join AddressXReff inner join Address ..... however i must have
left outer join mediaXref left outer join media


the problem is that if there is no entry in Media or mediaXref, I don't get any results

i tried to get over it by using
where (media.mediaTyple like 'thumbnail' or media.mediaType is null)
but then i started getting multiple results for each hotel because media's of type movie or full_image or etc... all got returned


any clue?

thanks

View 5 Replies View Related

Incorrect Syntax Near The Keyword 'from'. Line 1: Incorrect Syntax Near ')'.

May 27, 2008

This is the error it gives me for my code and then it calls out line 102.  Line 102 is my  buildDD(sql, ddlPernames)  When I comment out this line the error goes away, but what I don't get is this is the same way I build all of my dropdown boxes and they all work but this one.  Could it not like something in my sql select statement.  thanksPrivate Sub DDLUIC_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles DDLUIC.SelectedIndexChanged
Dim taskforceID As Byte = ddlTaskForce.SelectedValueDim uic As String = DDLUIC.SelectedValue
sql = "select sidstrNAME_IND from CMS.dbo.tblSIDPERS where sidstrSSN_SM in (Select Case u.strSSN from tblAssignedPersonnel as u " _
& "where u.bitPresent = 1 and u.intUICID in (select intUICID from tblUIC where intTaskForceID = " & taskforceID & " and strUIC = '" & uic & "'))"ddlPerNames.Items.Add(New ListItem("", "0"))
buildDD(sql, ddlPerNames)
 
End Sub

View 2 Replies View Related

Incorrect Syntax Near The Keyword 'SELECT'.Incorrect Syntax Near The Keyword 'else'.

May 22, 2008

What I am trying to create a query to check, If recDT is not value or null, then will use value from SELECT top 1 recDtim FROM Serv. Otherwise, will use the value from recDT. I have tried the below query but it doesn't work. The error says, Incorrect syntax near the keyword 'SELECT'.Incorrect syntax near the keyword 'else'.1 SELECT
2 case when recDT='' then SELECT top 1 recDtim FROM Serv else recDT end
3 FROM abc
4
Anyone can help? Thanks a lot.

View 5 Replies View Related

This All Seemed Simple Enough...

Mar 24, 2007

...when I started this endeavor.
I have a previously developed Lotus Notes App. The idea was simple; as
I am sefl taught on Lotus Script, I figured I'd be able to stumble my
way through VB.Well,
it started OK. I used VB Express to get familiar with the stuff, but
decided to go with a full version of VS 2005 and try and get this thing
properly developed as a web app. I purchased several reference books
etc., and have become relatively familiar with the forums here.First
issue I have is that I simply want to use code to update or add records
to an SQL DB. I know about datagridview etc., but I want to update the
DB using forms, not the tabular view those controls provide. I thought
it would be relatively straight forward, but found my ignorance runs
deeper than I thought. When I tried to do so I am finding I am not
really clear on where to make declarations etc. in the web app.  If anyone could point me in the right direction that would be great. The
issue with searching these forums is most posts deal with datagridview
or something similar.I have spent a ton of time trying to find relevant
posts or articles, but have had no luck yet.Again, all Ireally
need is a nudge in the right direction. I am more than willing to plod
through reference materials or articles/posts to find what I need to
know, I just can't find where to even start on the info I need. Regards, Joe
 

View 3 Replies View Related

Its Got To Be Simple....

Feb 24, 2008

 Hi
I have a problem with my sql WHERE query, if i manually type ([Area] = 'The First Area')  then it is okay but if i try and pass the variable 'The First Area' using the

([Area] = @Area) it doesnt work. 
 ALTER PROCEDURE dbo.StoredProcedure1(@oby nvarchar,@Area char,@Startrow INT,@Maxrow INT, @Minp INT,@Maxp INT,@Bed INT)ASSELECT * FROM(SELECT row_number() OVER (ORDER BY @oby DESC) AS rownum,Ref,Price,Area,Town,BedFROM [Houses] WHERE ([Price] >= @Minp) AND ([Price] <= @Maxp) AND ([Bed] >= @Bed) AND ([Area] = @Area)) AS AWHERE A.rownum BETWEEN (@Startrow) AND (@Startrow + @Maxrow) Please Help I know it must be something simple as the sql works but not when i pass the variable.... Thanks In Advance  

View 2 Replies View Related

Simple SQL

Dec 30, 2004

How can i get an output like this from this sql??

HEM_PATIENT_ID is primary key...

Output:
First row: initial values of the fields
Second row: average of the same fields

Please help me...



select * from (
select HEM_LOKOSIT, HEM_NNS
from LPMS.HEMOGRAMS
where HEM_PATIENT_ID = 33
union
select AVG(HEM_LOKOSIT), AVG(HEM_NNS)
from LPMS.HEMOGRAMS
where HEM_PATIENT_ID = 33)
order by HEM_LOKOSIT desc nulls last;

View 1 Replies View Related

Simple Help

May 20, 2001

Am new to SQL Server , can any1 tell me is there anyway to display date in this format month and year like Apr 2000 ,excluding the day.

eg: 01/28/2000 should b displayed like Jan 2000

View 5 Replies View Related

Should Be Simple !!!!

Jan 25, 2001

Hi,

I'm relatively new to SQL7 but I did use 6.5 a fair bit.
I'm trying to test the restore of the Transaction log backup and having a bit of difficulty. The idea is that I make a complete database backup at 1am backup the transaction log every 30 minutes between 7am and 7pm. I need to be able to restore the database to a known state between 7am and 7pm with a max data loss of 30 minutes.

What I am trying to achieve is (as a test):

1)Create a small test database with a test table
2)Add some data to the test table
3)Back up the transaction log
4)Restore the transaction log to 'undo' the data added in step 2

Should be simple I think !!! The problem I am encountering is that in step 4 it won't let me restore only the transaction log (a tick automatically appears in the database backup as well). Bah !

Can someone please tell me what simple steps are required to get this to work. I need specifically on what options to chose during the backup and restore processes.

Thankyou,

Tim

View 4 Replies View Related

Simple SQL

Nov 8, 1999

Given one table with one column and two rows, one containing the string 'Bill', one containing the string 'Gates'.

Write a select statement which gives you the result 'Bill Gates'.

???+

View 1 Replies View Related

Simple SQL

Apr 2, 2003

Hi All,

I have a table with 2 columns which looks like the following.

IDText
-------------
1AAA
1BBB
1CCC
2DDD
2EEE
2FFF
3GGG
3HHH
3III

Each ID can have multiple texts associated with it. I want to write a query that gives me the following output.

IDText
-------------
1AAA; BBB; CCC
2DDD; EEE; FFF
3GGG; HHH; III

I appreciate your help

Thanks

View 1 Replies View Related

Simple SQL

Apr 2, 2003

Hi All,

I have a table with 2 columns which looks like the following.

IDText
-------------
1AAA
1BBB
1CCC
2DDD
2EEE
2FFF
3GGG
3HHH
3III

Each ID can have multiple texts associated with it. I want to write a query that gives me the following output.

IDText
-------------
1AAA; BBB; CCC
2DDD; EEE; FFF
3GGG; HHH; III

I appreciate your help

Thanks

View 1 Replies View Related

Looks Simple But ...

Jan 11, 2007

Hi,
I have a table with two columns. I need to find distinct value of col1 and the correspondin repeated value of col2 for that col1 value with comma seperated list. Is there any function
for this in MS SQL?
I need somethgn like
a 1,2,3
b 4,5
c 7
d 5,55,5

I can do that with creating 2 cursors but looking for some easy way around.

Any suggestion and help highly appretiate.

Thanks

View 2 Replies View Related

Simple Sql ?

Jan 20, 2006

incorrect syntax near #
how do i fix this and did i make any other errors?


SELECT Master.CheckNum, Master.CheckDate, Master.ExpenseType, Deal.Alias, Detail.InvoiceDate, Detail.InvoiceAmount, Detail.Person, Detail.Deal, Detail.InvoiceNum, Detail.Reference, Detail.idDetial
FROM Master INNER JOIN (Deal INNER JOIN Detail ON Deal.Deal = Detail.Deal) ON Master.CheckNum = Detail.CheckNum
WHERE (((Master.CheckDate)>#12/5/2005#) AND ((Deal.Alias)="aic"));

View 3 Replies View Related

Using And In Simple Sql

Apr 15, 2008

Originally i had:

DELETE FROM #RptDetails WHERE StructureType <> @StructureType
AND #RptDetails WHERE #RptDetails.TraderId <> @TraderId OR #RptDetails.TraderId is null


But it didnt delete the structure types i changed to :
DELETE FROM #RptDetails WHERE StructureType <> @StructureType --AND
DELETE FROM #RptDetails WHERE #RptDetails.TraderId <> @TraderId OR #RptDetails.TraderId is null

and it did, how do i format the 2nd sql into 1 statement and what was i doing wrong?

View 1 Replies View Related

Simple SUM

Apr 5, 2006

Hi,

How do I sum all of the returned values into my output param ? This returns multiple rows, all data is oftype decimal.

Thanks
Bob


ALTER proc
spPSICalcA9

@iReturn int output,
@Contract varchar (8)

as

Select
sd.HoursLostRain,
sd.HoursLostMaxT,
sd.HoursLostMinT,
sd.HoursLostFrost,
sd.HoursLostWind,
sd.HoursLostVis

from
SiteDiary sd
where
sd.Contract = @Contract



"I dislilke 7am. If &am were a person, I would kick 7am in the biscuits." - Paul Ryan, dailyramblings.com

View 5 Replies View Related

Simple AND OR

Apr 5, 2006

Hi,

I need to return all records where ..
Contract = @Contract

AND

CrossReference is null or ""

I have this but I dont think its right..

Bob

where
a.Contract = @Contract AND a.crossreference is null OR a.crossreference = ""


"I dislilke 7am. If &am were a person, I would kick 7am in the biscuits." - Paul Ryan, dailyramblings.com

View 8 Replies View Related

Simple SQL Help

Mar 7, 2007

I think it's simple, but I can't get it to work.In English its: find records in TableA where the field [Field1] hasmore than one unique value in Field2sample records in TableAField1 Field22241 123452241 123452242 123452242 99856desired return (2 records)2242 123452242 99856thank you for your helpPaul

View 3 Replies View Related

Simple I Think

Jul 20, 2005

I have a form that after being filled out has its contents written to adatabase and then goes to confirmation .asp page. I want the confirmationpage to be personalized but I am not sure how to pass the "name" parameterto the confirmation.asp page. I know I am going to kick myself whrn I seethis.Thanks, Houston

View 7 Replies View Related

Simple ?

Feb 11, 2008

Greetings,

I'm trying to find out if a particular column in a table has more than 10 digits. for example: the TN column.
How can I write this query? The data type for this column is bigint. Also, would it be better to change this data type to char(10) instead as it's used primarily for phone # lookups? Thanks in advance!

ID TN
1 7132483234

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved