SQL Task ERROR: End Tag 'Doc' Does Not Match The Start Tag 'D彈Ӏęoc'.
Mar 3, 2007
Scenario generating the error:
I use an "SQL task" to run a stored procedure (SP) to bring me an XML as resultset. The SP generates an XML using "XML EXPLICIT".
When I run my package from my Visual Studio (at my PC) I get a clean XML that I am capable of traversing. I was very happy....but when I schedule a job on my server to run this package, I get : ERROR: End tag 'Doc' does not match the start tag 'D彈Ӏęoc. Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly'. (I had to add a log provider to catch this).
Why is getting a start tag with invalid characters, thus causing to fail my package?
Does it have to do with the regional settings on my PC/Server?
Please help!
View 1 Replies
ADVERTISEMENT
Mar 7, 2007
1 :Control Flow Excute SQL task: Truncate Table
2: Dataflow Task: Datareader--Script componant--OLE DB Destination (SQL Server 2005--a single table --always around 600,000 rows)
How do I set up a transaction where if there is a failure the Truncate Table command will roll back---and the OLE Destination (A single SQL Server table) will be left the same as before the load started.
Another question with that volume of data --600,000 rows will a truncate table be pratical in a transaction
Any ides welcome
thanks in advance
David
View 3 Replies
View Related
Apr 22, 2000
I need to start a job task from the command line. Does anyone know of the correct command(s) to do this?
I also need to check to see if a specific job task is currently executing from the command line. Does anyone know of the correct command(s) to do this?
Thanks for any assistance.
Jim
View 4 Replies
View Related
May 6, 2008
How to use the "Analysis Services Execute DDL Task" in SSIS to stop or start the Analysis Services.? Many thnaks.
View 5 Replies
View Related
May 3, 2007
On a multi node Win2003 x64 R2.
When preforming install for 2nd SQL instance. Setup fails with log entries
Task did not appear to start on machine NODE2 : 267013
Task did not appear to start on machine NODE3 : 267013
Note: first install worked fine - after getting over MSDTC issues...
Also have confirm task scheduler service is running on all nodes.
Anyone with some insights?
Regards
View 3 Replies
View Related
Mar 21, 2007
Can't an SSIS package run "in the background", so to speak, without having either the cmd.exe or dtexecui windows open while executing? I'd obviously rather not have to have a window open when the thing is running right?
View 2 Replies
View Related
May 11, 2006
I have a flatfile source with qty,title and author..i add a lookup and in that i establish relation between title and titel of pubs database..but i am getting an error..
one or more columns do not hav supported data types,or their datatypes do not match..i checked both hav dt_str,and in database pubs title is varchr..so why this eror?
View 3 Replies
View Related
Feb 21, 2008
Scenario: Launch SQL Server 2005 Management Studio & Connect to Server, ie: ServerNameInstanceName. Click "New Query" Button
Running the following SQL Statement returns 842 rows but should return 1343:
SELECT A.id, C.PName, B.School
FROM users AS A
LEFT OUTER JOIN Bio AS B ON A.id = B.id
LEFT OUTER JOIN Groups AS C ON A.PName = C.PName ORDER BY A.Id
I get 1343 rows when I change Line 2 of SQL Statement to: "FROM dbName.dbo.users AS A".
Clicking "New Query" w/out first opening the database must run the query in the context of the Master Database??
I noticed in Sql Server 2000 if I connect Query Analyzer to the Server and run the query I get 842 & I can see that the default selected database is master. When I make the change mentioned above I then get 1343.
Why doesn't this produce an error though? I'd rather get an error than the wrong result set.
View 4 Replies
View Related
Nov 3, 2005
Can someone please answer a problem that I've run into. I know that it's probably something stupid. I keep getting this error:Server: Msg 107, Level 16, State 3, Line 1The column prefix 'vFirstTimeEntered' does not match with a table name or alias name used in the query.Here is my query:-----------------------------------------------------------------Update TimeSheetSectionSet TimesheetSection.SECSTARTDT = vFirstTimeEntered.schlstuidWhere timesheetsection.schlstuid = vFirstTimeEntered.schlstuid AND timesheetsection.sectionid = vFirstTimeEntered.sectionid AND Timesheetsection.secstartdt < '2005-08-01'------------------------------------------------------------------vFirstTimeEntered is a view that I created.Do I need a sub query? I know that if this was a select query I'd need to put vFirstTimeEntered in the FROM part but I don't know where it should go here.Thanks for any assistance.Scott
View 1 Replies
View Related
Apr 8, 2008
I receive the following error message when I try to use the Bulk Insert Task to load BCP data into a table:
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 4. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (overflow) for row 1, column 1 (rowno).".
Task failed: Bulk Insert Task
In SSMS I am able to issue the following command and the data loads into a TableName table with no error messages:
BULK INSERT TableName
FROM 'C:DataDbTableName.bcp'
WITH (DATAFILETYPE='widenative');
What configuration is required for the Bulk Insert Task in SSIS to make the data load? BTW - the TableName.bcp file is bulk copy file as bcp widenative data type. The properties of the Bulk Insert Task are the following:
DataFileType: DTSBulkInsert_DataFileType_WideNative
RowTerminator: {CR}{LF}
Any help getting the bcp file to load would be appreciated. Let me know if you require any other information, thanks for all your help.
Paul
View 1 Replies
View Related
Oct 17, 2013
I have a table names Alert_Event and a new column named BSP_Phone has been added to the table. I am trying to set NULL values to the column and I get the below error. I am setting null values in the bolded text in the query.
Error Message:
Msg 213, Level 16, State 1, Procedure SaveBSPOutageInfo, Line 22
Column name or number of supplied values does not match table definition.USE [gg]
GO
/****** Object: StoredProcedure [dbo].[SaveBSPOutageInfo] Script Date: 10/17/2013 19:01:20 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[SaveBSPOutageInfo] @eventCreatedDate DATETIME, @eventOrigin varchar(10),
[code]....
View 3 Replies
View Related
May 11, 2007
In the v1.2 CTP version, the DatabaseMetadata methods for getting information about objects in a database (i.e. getTables(), getColumns(), ...) errors if your current database connection is in a different database than the object you are quering.
Is this the intended behavior going forward?
In my case I have access to both database A and database B. My current connection is in database A , but I am looking up object in database B.
ResultSet rs = conn.getDatabaseMetadata.getTables("B","dbo","%",{"TABLES" });
[junit] The database name component of the object qualifier must be the name of the current database.
[junit] com.microsoft.sqlserver.jdbc.SQLServerException: The database name component of the object qualifier must be the name of
the current database.
[junit] at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
[junit] at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
[junit] at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
[junit] at com.microsoft.sqlserver.jdbc.SQLServerStatement$StmtExecCmd.doExecute(Unknown Source)
[junit] at com.microsoft.sqlserver.jdbc.TDSCommand.execute(Unknown Source)
[junit] at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(Unknown Source)
[junit] at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(Unknown Source)
[junit] at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(Unknown Source)
[junit] at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeQueryInternal(Unknown Source)
[junit] at com.microsoft.sqlserver.jdbc.SQLServerDatabaseMetaData.getResultSet(Unknown Source)
[junit] at com.microsoft.sqlserver.jdbc.SQLServerDatabaseMetaData.getResultSet(Unknown Source)
[junit] at com.microsoft.sqlserver.jdbc.SQLServerDatabaseMetaData.getColumns(Unknown Source)
~Mike Hale
View 8 Replies
View Related
May 4, 2006
Hi,
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
View 17 Replies
View Related
Dec 20, 2007
Hi,
I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:
Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.
I don't even know what this means?
thanks,
View 4 Replies
View Related
Sep 7, 2007
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
View 5 Replies
View Related
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
Aug 18, 2006
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
View 5 Replies
View Related
Oct 17, 2005
good morning everyone,
I have created some scheduled jobs which basically are transfer data from Oracle DB to SQL server through DTS package. I created DTS pacakages and right click to schedule the job for daily run.
I was able to execute DTS package to transfer data w/o problems at all. However it seemed scheduled job could not run automatically nor I kick off the job manually.
I have attached the error message below. It seemed I need some components be installed. Would someone take a look and let me know what is it, name of the components, probably cost information? Thank you very much for the help in advance.
View 2 Replies
View Related
Jan 20, 2004
When starting my SQL Server 2000 generate error and stop. This is the log:
Standard Edition on Windows NT 4.0 (Build 1381: Service Pack 6)
2004-01-20 11:05:36.59 server Copyright (C) 1988-2000 Microsoft Corporation.
2004-01-20 11:05:36.59 server All rights reserved.
2004-01-20 11:05:36.59 server Server Process ID is 115.
2004-01-20 11:05:36.59 server Logging SQL Server messages in file 'C:MSSQL7logERRORLOG'.
2004-01-20 11:05:36.63 server SQL Server is starting at priority class 'normal'(1 CPU detected).
2004-01-20 11:05:36.66 server SQL Server configured for thread mode processing.
2004-01-20 11:05:36.66 server Using dynamic lock allocation. [2500] Lock Blocks, [5000] Lock Owner Blocks.
2004-01-20 11:05:36.67 server Attempting to initialize Distributed Transaction Coordinator.
2004-01-20 11:05:38.69 spid3 Starting up database 'master'.
2004-01-20 11:05:38.85 spid3 Server name is 'DB_SERVER'.
2004-01-20 11:05:38.85 server Using 'SSNETLIB.DLL' version '8.0.194'.
2004-01-20 11:05:38.87 server SQL server listening on TCP, Shared Memory, Named Pipes.
2004-01-20 11:05:38.87 server SQL server listening on 192.168.1.29:1433, 172.16.48.10:1433, 127.0.0.1:1433.
2004-01-20 11:05:38.87 server SQL Server is ready for client connections
2004-01-20 11:05:38.87 spid5 Starting up database 'model'.
2004-01-20 11:05:38.87 spid8 Starting up database 'msdb'.
2004-01-20 11:05:38.87 spid9 Starting up database 'pubs'.
2004-01-20 11:05:38.87 spid10 Starting up database 'Northwind'.
2004-01-20 11:05:38.87 spid11 Starting up database 'SIM'.
2004-01-20 11:05:39.21 spid5 Error: 9003, Severity: 20, State: 1
2004-01-20 11:05:39.21 spid5 The LSN (5:377:1) passed to log scan in database 'model' is invalid..
2004-01-20 11:05:39.31 spid8 Bypassing recovery for database 'msdb' because it is marked SUSPECT.
2004-01-20 11:05:39.39 spid11 Starting up database 'GMS'.
2004-01-20 11:05:39.39 spid8 Starting up database 'euro'.
2004-01-20 11:05:40.14 spid10 Starting up database 'TigrisDB'.
View 3 Replies
View Related
Jan 16, 2006
I have an install of SQL Server 2005 Developer Edition, and the Integration Services Service will not start. If I attempt to start the service via the Services Computer Management screen, the system throws a message that says the service started, then stopped.
If I attempt to start the service via the SQL Server Configuration Manager, I get a "service did not respond in a timely fashion", which is so unfashionable.
Of particular interest is that during the install I did get an error message about WMI security. Looking at the WMI Security tab in WMI Control, I noticed that the key that the setup program was trying to configure did not exist under "ServerEvents".
There is a key named "MSSQLSERVER", but that did not match the key that the setup program was complaining about.
I am not seeing any event log items relating to errors. The system log shows the service startup and service shutdown as information items.
Anyone have any ideas?
View 3 Replies
View Related
Sep 21, 2006
Hi,I'm new to ASP.NET, and am currently looking into XML.I'm trying to write XML using data from an SQL Server 2000 table. But I seem to be getting the following error regarding the SQL Server connection:Compiler Error Message: CS1502: The best overloaded method match for 'System.Data.SqlClient.SqlCommand.SqlCommand(string, System.Data.SqlClient.SqlConnection)' has some invalid argumentsSource Error:Line 23: {
Line 24: SqlDataAdapter mySqlDataAdapter = new SqlDataAdapter();
Line 25: mySqlDataAdapter.SelectCommand = new SqlCommand(queryString, connString);
Line 26: mySqlDataAdapter.Fill(myDataSet);
Line 27: return myDataSet;Source File: c:InetpubwwwrootmappingcreateGeoRSSFile.aspx.cs Line: 25 This is my code:using System;
using System.Data;
using System.Data.SqlClient ;
using System.Configuration;
using System.Collections;
using System.Text;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Xml;
public partial class createGeoRSSFile : System.Web.UI.Page
{
protected void Page_Load(object sender, DataSet myDataSet, EventArgs e)
{
string connString = "server=SQLSERV1;database=Historical_Statistics;UID=dbuser;PWD=Password";
string queryString = "SELECT Town, PostCode, Latitude, Longitude FROM UKPostCodes";
using (SqlConnection mySqlConnection = new SqlConnection(connString))
{
SqlDataAdapter mySqlDataAdapter = new SqlDataAdapter();
mySqlDataAdapter.SelectCommand = new SqlCommand(queryString, connString);
mySqlDataAdapter.Fill(myDataSet);
return myDataSet;
}
// Create a new XmlTextWriter instance
XmlTextWriter writer = new XmlTextWriter(Response.OutputStream, Encoding.Unicode);
// Start writing!
writer.WriteStartDocument();
writer.WriteStartElement("item");
// Creating the <town> element
writer.WriteStartElement("town");
writer.WriteElementString("PostCode",myDataSet .Tables[1].Columns("PostCode"));
writer.WriteElementString("geo:lat",myDataSet.Tables[1].Columns("Latitude"));
writer.WriteElementString("geo:lon", myDataSet.Tables[1].Columns("Longitude"));
writer.WriteEndElement();
writer.WriteEndElement();
writer.WriteEndDocument();
writer.Flush();
writer.Close();
}
}What seems to be causing this error?Thanks.
View 4 Replies
View Related
Mar 24, 2008
Is there a way to avoid entering column names in the excel template for me to create an excel file froma dynamic excel using openrowset.
I have teh following code but it works fien when column names are given ahead of time.
If I remove the column names from the template and just to Select * from the table and Select * from sheet1 then it tells me that column names donot match.
Server: Msg 213, Level 16, State 5, Line 1Insert Error: Column name or number of supplied values does not match table definition.
here is my code...
SET @sql1='select * from table1'SET @sql2='select * from table2'
IF @File_Name = '' Select @fn = 'C:Test1.xls' ELSE Select @fn = 'C:' + @File_Name + '.xls' -- FileCopy command string formation SELECT @Cmd = 'Copy C:TestTemplate1.xls ' + @fn
-- FielCopy command execution through Shell Command EXEC MASTER..XP_CMDSHELL @cmd, NO_OUTPUT -- Mentioning the OLEDB Rpovider and excel destination filename set @provider = 'Microsoft.Jet.OLEDB.4.0' set @ExcelString = 'Excel 8.0;HDR=yes;Database=' + @fn
exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet1$]'') '+ @sql1 + '') exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet2$]'') '+ @sql2 + ' ')
View 4 Replies
View Related
Jan 5, 2000
I get the following error when I try to start SQL Server:
"An error 1069 - (The service did not start due to logon failure) occured performing this service operation on the MSSQL Server service"
I'm switching between 6.5 and 7.0 and get the same message in both. It worked before, does anyone know what the problem can be?
Thanks,
Paul
View 1 Replies
View Related
Jun 4, 2002
When l try to start up sql agent on a remote server l get the following error. Error 1722 RCP Server is unavailable. How can l fix that.
View 1 Replies
View Related
Aug 1, 2006
Hello Guys,
I am getting the following error when I try to start SQL 2005 Management Studio to manage my SQL Server :
Cannot load the DLL xpstar.dll, or one of the DLLs it references. Reason: 126(The specified module could not be found.).
Any ideas ?
Thanks,
View 4 Replies
View Related
Feb 16, 2014
I've opened port 1433 in the Config Manager (error: The request failed or the service did not respond in a timely fashion.)
My Shared Memory Protocol is enabled, I've confirmed that the Server is allowed in Windows Firewall, I've configured the SQL Server to allow remote connections, I've started the SQL Browser with success....
I also receive the error message that (The MSSQL$SQLEXPRESS service on .... started and then stopped (Object Explorer)).
I uninstalled and reinstalled SQL Server Express 2012 and get the following failures:
Database Engine Services
SQL Server Replication
I think this the the core of my issue. how to remedy this?
View 1 Replies
View Related
Mar 14, 2008
Hi Guys
I have my Sql server 2005 running perfectly (until yesterday) on vista. But today when I tried to connect to the server I get error 3417 meaning my master database needs rebuilt or repaired.
I tried all sort of techniques I found on internet like checking if my data files in data dir are not compressed and for the SQL Server Servies it logs on local account with interact with desktop checkbox checked. But no luck.
I tried to use setup.exe in my installer CD to rebuild master database but it seems the cmd doing nothing. To rebuild, I use the following command “start /wait setup.exe /qn INSTANCENAME=<instance> REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=<New SA Password>�. This cmd runs but due to some reason my master db is not being repaired. Ideally, I should see recent date change for this file.
Please advice how can I connect back to my server again making sure my databases are not lost.
View 3 Replies
View Related
Jan 5, 2006
The local sql server that was working fine earlier does not start now. I have already created tables and accessed them using stored procedures.
I get an error 1069: The service did not start due to logon problems. I have only changed my domain password. I do not remember what authentication I chose for log on.
Any suggestions would be helpful.
Thanks
View 11 Replies
View Related
Jun 2, 2007
when i try to start SQL SERVER 2005 its give me this ERROR MESSAGE:
"The service did not respond to the start or control request in atimely fashion ,you need administrator privileges to be able to start/stop this servic.(SQLSAC)"
Notes: am login in as system administrator with full previligies,
its was work normally ,but after i made update for windows then this error hapen after windwos repair.
View 1 Replies
View Related
Jun 2, 2007
when i try to start SQL SERVER 2005 its give me this ERROR MESSAGE:
"The service did not respond to the start or control request in atimely fashion ,you need administrator privileges to be able to start/stop this servic.(SQLSAC)"
Notes: am login in as system administrator with full previligies,
its was work normally ,but after i made update for windows then this error hapen after windwos repair.
View 1 Replies
View Related
Jan 23, 2008
Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
View 12 Replies
View Related
Jul 28, 2006
This error occurs when the ActiveX task tries to execute:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.
Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.
View 8 Replies
View Related
Jun 20, 2007
hello
I have a problem with Sql task
when sql task tried to assing a value to my variable I have this error ""La valeur n'est pas comprise dans la plage attendue."
I'm using ODBC connexion for a csv file
someone can help me ?
thanks
View 4 Replies
View Related
