SQL View Using The CASE Try To Find The @
Oct 20, 2005
have created a view in MS SQL2000 as followed:
Select order_NO, shiptoname, Shiptoaddress, Shiptocity,shiptostate, shiptozip,
EMAILaddress
FROM orders;
my question is: If the email @ sign exist in the EMAILaddress column then I need to have a Y show in another column called EMAILflag, if the @ sign does not exist then I would need the EMAILflag to be a N.
This what I have but the emailaddress column is not always null it just has spaces in the field.
Select order_NO, shiptoname, Shiptoaddress, Shiptocity,shiptostate, shiptozip,
EMAILaddress, CASE WHEN emailaddress IS NULL THEN 'N' ELSE 'Y' END AS emailflag
FROM orders;
Any HELP would be GREAT.
Thank You!!
View 2 Replies
ADVERTISEMENT
Jan 12, 2004
I am trying to use the 'case' statement in a view. It looks like this.
select column1,column2
case when substring(column3,1,2) like '01' then my_column ='city_name'
end
from table1
I keep getting an incorrect syntax near 'like'. column1 and column2 exist in the table that the view is dependent on, but my_column is a virtual column, meaning I am creating this column on the fly.
Thanks
View 7 Replies
View Related
Apr 11, 2008
I have a view where I'm trying to populate a field base on the values on the USEJSLOAD field. The USEJSLOAD it's a (bit,null) field and there are only two types of values on it they are 'True' or 'False' so if it's true grab the data from one field else the other field. When I try to run the view I get the following error, 'Conversion failed when converting the varchar value '1-1S ' to data type int. Any help would be greatly be appreciated.
(CASE WHEN dbo.ftlibr_base.USEJSLOAD = 1 THEN dbo.trn_transport.TRN_LOADNODERIVED ELSE trn_transport.TRN_DISPATCHNO END)
Sample data:
ftlibr_base
Work_Order | USEJSLOAD
1 | True
2 | False
3 | True
dbo.trn_transport
Work_Order | TRN_LOADNODERIVED | TRN_DISPATCHNO
1 | 1-1S |1
2 | 4-2S |10
3 | 1-30S |2
I would like:
Work_Order | Load #
1 | 1-1S
2 | 10
3 | 3-20S
View 2 Replies
View Related
Mar 15, 2005
Im looking to strip all non numeric values out of a string at the SQL level in order to compare it to similar user entered data.
Something like
SELECT REReplace(PhoneNumber,"[^0-9]","","ALL") AS NewPN
FROM Numbers
WHERE NewPN = 'UserEnteredNumber'
View 3 Replies
View Related
Jul 20, 2005
I am executing a case statement list below,USE NorthwindSELECTMONTH(OrderDate) AS OrderMonth,SUM(CASE YEAR(OrderDate)WHEN 1996 THEN 1ELSE 0END) AS c1996,SUM(CASE YEAR(OrderDate)WHEN 1997 THEN 1ELSE 0END) AS c1997,SUM(CASE YEAR(OrderDate)WHEN 1998 THEN 1ELSE 0END) AS c1998FROM OrdersGROUP BY MONTH(OrderDate)ORDER BY MONTH(OrderDate)According to BOL I should be able to save this query as a view.However when I try to save the query as a view I get a error messagestating"View definition includes no output columns or includes no items inthe FROM clause"According to what I have read although the case statement is notsupported via the enterprise query pane, the query should still runand be saved. In my case however I cannot seem to save it no matterwhat I try.Can anyone shed any light on the matter?Thanks in advanceBryan
View 3 Replies
View Related
Feb 17, 2000
Hi, There
I have a BIG question.. Question is "How can I find out that SQL server7.0 has a Case Sensitive setting?" Where can I find this setting?
Thanks inadvance
Jay
View 2 Replies
View Related
Jun 28, 2000
CASE is not supported Error in a View
In SQL 7, when a view parses the below code, it generates a 'CASE is not Supported' error'; however, it will still generate and show the field with the CASE statements correctly; What might cause this error?
(Other useful info: this code is from a converted SQL 6.5 DB and the SQL 7 is running in compatibility mode, i inserted '' to remove concantenation of NULL problems;)
Example of display:
10132 Hampton, VA: A. Deepak Publishing
SELECT PublisherID, Info = CASE WHEN City IS NOT NULL
THEN City + CASE WHEN State IS NOT NULL
THEN ', ' + State ELSE '' END + ': ' ELSE ''
END + Publisher
FROM tblLibraryPublishers
Thank you!
Llyal
View 2 Replies
View Related
Jan 22, 2008
Hello Experts,
I tried to retreive an input column using GetVirtualInputColumnByName, to map it with output, it gave error. I found that it is because the value passed bstrName parameter was in different case. say for example in the column it is "ColNo1" where as in the GetVirtualInputColumnByName i used "Colno1".
Can anyone tell, Is there anyway to find the column in a case in-sensitive way?
Thanks.
View 1 Replies
View Related
Oct 29, 2015
The below would work if all of the values in A.Value were numbers but they are not. So I need to restrict the view to only look at the following measures but still show all the other row.
WHERE [Measure] IN ('RTT-01','RTT-04','RTT-07')
SELECT
M.[Description]
,A.*
,M.Threshold
,M.[Threshold Direction]
[Code] ....
Is there any way that I can create a select statement in the case when to only look for them measures that I know contain numbers?
View 9 Replies
View Related
Aug 6, 2015
I am required to find or check that a specific word exists in string or not.
Suppose I have to find the word 'st' than I need the result true if and only if the following occurrences are there.
1. 'St is valid;' -> true
2. 'DOB is valid;ST is invalid;' -> true
3. 'DOB is valid; ST is invalid;' -> true
4. 'DOB is valid;invalid ST;' -> true
5. 'DOB is valid; invalid ST;' -> true
6. 'DOB is valid; invalid STate;' -> false
Means the exact ST should be search. It is not free text search.
T-SQL is needed to be used in select statement with case using PATINDEX, RegEx or any suitable t-sql command.
View 10 Replies
View Related
Nov 15, 2006
Dear friends,
is there any way to find the table names from a view?
ex: suppose i have a view named as vorganization.i need all the tables in this view. is it possible to get through a query? same case for procedures and functions also.........
or we have to use sp_helptext?
is there any better way?
thank you very much.
Vinod
View 12 Replies
View Related
Mar 19, 2008
Hi,
Is there a way to write a select statement in order to find out which database a certain view is in? One way is to write "select * from view" and switch between available databases until "Invalid object name 'vw_X'" does not show.
Any other ways?
View 3 Replies
View Related
Nov 19, 2013
How to find whether an object is used by any sp , view ?
I need a query which will result the sp , view names which uses the given object name .
View 6 Replies
View Related
Oct 4, 2013
I have this query:
SELECT a.*
FROM Unscheduled_Arrival a INNER JOIN (SELECT Person_ID
,[arrival date]
,[leaving date]
,[unique stay id]
,[area code]
FROM Unscheduled_Arrival
[Code] ....
And what I am trying to do is find instances where a person has arrived back at a different area within 7 days of leaving from a planned visit to any other area different from the last. so lets say we had person ID = 1 and they had had 3 planned visits to one area (not equal to area_gh) in the last 4 months but after the 2nd planned trip to the other area, and before the commencement of the 3rd planned trip to any area not equal to area_gh, they had arrived unscheduled to area_gh, and this unplanned visit was within 7 days of leaving the 2nd last planned visit to any area not equal to area_gh.
The query I have shows data from unscheduled arrivals to the area_gh for a person who has also had visits to any area other than area_gh, but each record for unscheduled visits to area_gh duplicates for the amount of times the person has had scheduled visits to any area not equal to area_gh. This is the first problem but is as a result of not having the correct SQL for the refinement of the data.
This refinement requires that I return only the data that relates to the unscheduled arrival that is within 7 days of the last scheduled arrival, not duplicate rows of area_gh visits for all the scheduled arrivals.
Because my data is showing the data I want but the count is related to the scheduled arrivals I think I need to rewrite the query or alter it.
The data is already restricted to a year's worth of data.
I just need to find any instances of unscheduled arrivals (for arrival at area_gh) within 7 days of the end of any scheduled arrival (determined using leaving date) to area equal to area_gh.
There can be any number of scheduled arrivals and any number of unscheduled arrivals for each person. The [unique stay id] is distinct for each visit so person 1 can have 3 stays, all with a different [unique stay id].
View 3 Replies
View Related
Nov 15, 2007
Why don't you folks (SQL SERVER Management Studio Team or SQL SERVER Database Engine Team) provide an option by using which I would be in a position to know what all the other objects are depended on a selected object and vice versa. That means:
When I select a Table within the SQL SERVER Management Studio if there is an option for understanding "Which all the objects (tables or views) it is depended on (I mean Foreign key and etc... kind of relations) and also Which all the objects (Tables, Views, Stored Procedures and etc...) are using this table", It would be of great help for all developers.
I can be contacted over kotis@microsoft.com
I BLOG @ http://blogs.msdn.com/kreddy
View 3 Replies
View Related
Aug 31, 2015
How can I change my T-SQL text editor from text sensitive to text insensitive?
View 2 Replies
View Related
Jan 6, 2005
Hello:
I have created an SQL server table in the past on a server that was all case sensative. Over time I found out that switching to a server that is not case sensative still caused my data to become case sensative. I read an article that said you should rebuild your master database then re-create your tables. So after rebuilding the master database, a basic restore would not be sufficient? I would have to go and manually re-create every single table again?
Any suggestions?
View 4 Replies
View Related
May 4, 2007
Can someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
thanks in advance.
View 3 Replies
View Related
Aug 17, 2005
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
View 4 Replies
View Related
May 29, 2008
I am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
Jacob
View 5 Replies
View Related
May 4, 2015
I have column with value of all upper case, for example, FIELD SERVICE, is there anyway, I can convert into Field Service?
View 7 Replies
View Related
Aug 19, 2007
I am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI. Will there be any problems with this scenario? Thanks in advance!
View 2 Replies
View Related
Nov 5, 2007
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
View 1 Replies
View Related
Sep 6, 2007
I am working on a C#/asp.net web application. The application has a text box that allows a user to enter a name. The name is then saved to the database.
Before the name is saved to the database, I need to be able to check if the name already exists in the database. The problem here is that what if the name is in the database as "JoE ScMedLap" and somoene enters the name as "Joe Schmedlap" which already exists in the database,but just differs in case.
In other words how do deal with case sensitiviy issues.
View 2 Replies
View Related
Jul 20, 2005
Yesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
View 2 Replies
View Related
Jul 26, 2005
I tried all the INFORMATION_SCHEMA on SQL 2000 andI see that the system tables hold pretty much everything I aminterested in: Objects names (columns, functions, stored procedures, ...)stored procedure statements in syscomments table.My questions are:If you script your whole database everything you end up havingin the text sql scripts, are those also located in the system tables?That means i could simply read those system tables to get any informationI would normally look in the sql script files?Can i quickly generate a SQL statement of all the indexes on my database?I read many places that Microsoftsays not to modify anything in those tables and not query them since theirstructure might change in future SQL versions.Is it safe to use and rely the system tables?I basically want to do at least fetching of information i want from thesystem tables rather than the SQL script files.I also want to know if it's pretty safe for me to make changes in thesetables.Can i rename an object name for example an Index name, a Stored Procedurename?Can i add a new column in the syscolumns table for a user table?Thank you
View 4 Replies
View Related
Jul 23, 2005
I am looking to create a constraint on a table that allows multiplenulls but all non-nulls must be unique.I found the following scripthttp://www.windowsitpro.com/Files/0.../Listing_01.txtthat works fine, but the following lineCREATE UNIQUE CLUSTERED INDEX idx1 ON v_multinulls(a)appears to use indexed views. I have run this on a version of SQLStandard edition and this line works fine. I was of the understandingthat you could only create indexed views on SQL Enterprise Edition?
View 3 Replies
View Related
Jul 24, 2012
Write a CREATE VIEW statement that defines a view named Invoice Basic that returns three columns: VendorName, InvoiceNumber, and InvoiceTotal. Then, write a SELECT statement that returns all of the columns in the view, sorted by VendorName, where the first letter of the vendor name is N, O, or P.
This is what I have so far,
CREATE VIEW InvoiceBasic AS
SELECT VendorName, InvoiceNumber, InvoiceTotal
From Vendors JOIN Invoices
ON Vendors.VendorID = Invoices.VendorID
[code]...
View 2 Replies
View Related
Aug 24, 2007
Hi guys 'n gals,
I created a query, which makes use of a temp table, and I need the results to be displayed in a View. Unfortunately, Views do not support temp tables, as far as I know, so I put my code in a stored procedure, with the hope I could call it from a View....
I tried:
CREATE VIEW [qryMyView]
AS
EXEC pr_MyProc
and unfortunately, it does not let this run.
Anybody able to help me out please?
Cheers!
View 3 Replies
View Related
Jun 12, 2008
I have 3 database say
db1
db2
db3
I need to setup a script to read all the table names in the database above and then query the database to find the list of Stored Procedure using each table.(SQL Server)
View 5 Replies
View Related
Mar 9, 2006
I compared view query plan with query plan if I run the same statementfrom view definition and get different results. View plan is moreexpensive and runs longer. View contains 4 inner joins, statisticsupdated for all tables. Any ideas?
View 10 Replies
View Related
Aug 14, 2000
I had given one of our developers create view permissions, but he wants to also modify views that are not owned by him, they are owned by dbo.
I ran a profiler trace and determined that when he tries to modify a view using query designer in SQLem or right clicks in SQLem on the view and goes to properties, it is performing a ALTER VIEW. It does the same for dbo in a trace (an ALTER View). He gets a call failed and a permission error that he doesn't have create view permissions, object is owned by dbo, using both methods.
If it is doing an alter view how can I set permissions for that and why does it give a create view error when its really doing an alter view? Very confusing.
View 1 Replies
View Related
Feb 17, 2006
I have this view in SQL server:
CREATE VIEW dbo.vwFeat
AS
SELECT dbo.Lk_Feat.Descr, dbo.Lk_Feat.Price, dbo.Lk_Feat.Code, dbo.SubFeat.SubNmbr
FROM dbo.Lk_Feat INNER JOIN
dbo.SubFeat ON dbo.Lk_Feat.Idf = dbo.SubFeat.Idt
When ever I open using SQL Entreprise manager to edit it by adding or removing a field i inserts Expr1,2.. and I don t want that. The result I get is:
SELECT dbo.Lk_Feat.Descr AS Expr1, dbo.Lk_Feat.Price AS Expr2, dbo.Lk_Feat.Code AS Expr3, dbo.SubFeat.SubNmbr AS Expr4
FROM dbo.Lk_Feat INNER JOIN
dbo.SubFeat ON dbo.Lk_Feat.Idf = dbo.SubFeat.Idt
I don t want Entreprise manager to generate the Expr fields since I use the real fields in my application.
Thanks for help
View 4 Replies
View Related