I am experiencing a big problem with my SQL Server- it won't start. Every time I attempt to start it I get an error "Error 1069 (The service did not start due to logon failure) occurred while performing this service operation on the MSSQLService service. " sa will not work either. I have not made any system changes recently. I tried to use regrbld but nothing happened. Is there anything else I can do short of reinstalling SQL7?
View 3 Replies
1) RS Start in Window Severvices
2) RS Start in Configration
1) and 2) Is Same?
I think that It looks like same Operation.
Is it possible to start a DTS package from a SQL Stored Procedure? If so, do you have sample code for this invocation?
thx-
BT
...So glad there are still folks out there running 6.5! We've been running 6.5 and 7.0 for the last year or so (one of our apps required 6.5). SQL 6.5 is running on an Alpha box, and SQL 7.0 is running on an Intel box. I want to install 6.5 on yet another Intel box, then install 7.0 on that SAME box so that I can perform the DTS. (Doing DTS across different CPU types failed to transfer application objects.) After that is successful, I will uninstall the 6.5 on the Intel box and no longer use the Alpha box for SQL. Both the Alpha and Intel boxes are on the same Windows NT domain.
Here is the issue. After performing the CD install of 6.5 on the Intel box, I get a message that the install could not be performed successfully because the MSSQL service could not be started. When I attempt to start it manually from Control Panel, I get an NT Error 3 - that the path cannot be found. (And the errorlog says that the server is unnamed.) So the MSSQL folder exists, the MSSQL Server and SQL Exec services are visible in Control Panel (unstarted), the registry contains SQL Server info, but the only way I've been able to start SQL Server at all is by using the Net Start MSSQLserv command.
I have repeated this step a few times - by deleting the MSSQL folder and re-running SETUP. At no point does NT remove the MSSQL services or the registry entries. In the end, NT or MSSQL still cannot find the "path" needed to start up SQL Server.
What do I need to do to "reset the clock" so that NT knows where to find these services?
Hi,
I was trying to restore a master database. This is what I did:
1. rebuild the master database and it was successful
2. restart server in single mode with
sqlservr.exe -c -m
and I got the following window:
************************************************** ********
2006-01-27 10:30:01.49 server Microsoft SQL Server 2000 - 8.00.2039 (Intel X
86)
May 3 2005 23:18:38
Copyright (c) 1988-2003 Microsoft Corporation
Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2006-01-27 10:30:01.52 server Copyright (C) 1988-2002 Microsoft Corporation.
2006-01-27 10:30:01.52 server All rights reserved.
2006-01-27 10:30:01.52 server Server Process ID is 600.
2006-01-27 10:30:01.52 server Logging SQL Server messages in file 'e:Microso
ft SQL ServerMSSQLlogERRORLOG'.
2006-01-27 10:30:01.54 server SQL Server is starting at priority class 'norma
l'(4 CPUs detected).
2006-01-27 10:30:01.71 server SQL Server configured for thread mode processin
g.
2006-01-27 10:30:01.74 server Using dynamic lock allocation. [2500] Lock Bloc
ks, [5000] Lock Owner Blocks.
2006-01-27 10:30:01.99 server Attempting to initialize Distributed Transactio
n Coordinator.
2006-01-27 10:30:04.04 spid3 Warning ******************
2006-01-27 10:30:04.04 spid3 SQL Server started in single user mode. Updates
allowed to system catalogs.
2006-01-27 10:30:04.04 spid3 Starting up database 'master'.
2006-01-27 10:30:04.29 server Using 'SSNETLIB.DLL' version '8.0.2039'.
2006-01-27 10:30:04.29 spid5 Starting up database 'model'.
2006-01-27 10:30:04.29 spid3 Server name is 'SQLTEST1'.
2006-01-27 10:30:04.31 spid7 Starting up database 'msdb'.
2006-01-27 10:30:04.31 spid8 Starting up database 'pubs'.
2006-01-27 10:30:04.31 spid9 Starting up database 'Northwind'.
2006-01-27 10:30:04.31 server SQL server listening on 10.10.4.17: 1433.
2006-01-27 10:30:04.33 server SQL server listening on 127.0.0.1: 1433.
2006-01-27 10:30:04.34 server SQL server listening on TCP, Shared Memory, Nam
ed Pipes.
2006-01-27 10:30:04.36 server SQL Server is ready for client connections
2006-01-27 10:30:04.67 spid5 Clearing tempdb database.
2006-01-27 10:30:05.54 spid5 Starting up database 'tempdb'.
2006-01-27 10:30:05.70 spid3 Recovery complete.
2006-01-27 10:30:05.70 spid3 SQL global counter collection task is created.
************************************************** **
Now an hour passed and the window is still there. The SSQL service manager on the toolbars still has a red icon but not green. My questions are how do I know the process is done? What is the next step after SQL global counter collection task? Where can I find more information?
Thanks a lot.
Mark
I have recently invested in a new server that is running SBS premium, this come with SQL server and as a result of which I feel its time for me to start getting to grips with it.
I have reasonable knowledge of database design and SQL, extensive experience with access and some with Oracle. I have however never dealt with SQL server.
I generally don't have too much trouble picking up new technologies, and was wondering if anyone can point me in the right direction for learning SQL server from scratch? Is it realistic to be able to achieve this without doing a formal course? I intend to start using it to develop data-driven websites and applications.
Any help, advice and/or pointers are greatly appreciated.
Cheers
Dan
Hi,
I am not able to start any SQL Server job. Trying to start a job from Enterprise Manger, I get no error but the job doesnt execute.
Looks like in the Application Log there was an error 'Unable to read local eventlog'. Is this related to the problem or what should I do to fix this.
Thanks for the help.
Hi,
Getdate() will get me the date, but how I can calculate two other datetime values corresponding to the very first second and the very last second of the current day?
Eg.
Today is 2008-04-09 <whatever time>
Startdate should be 2008-04-09 00:00:01
Enddate should be 2008-04-09 23:59:59
Cheers,
Matt
Here's what I want to do:
I have a lot of instructions on how to do certain things for our department. I want to put these into a searchable database.
Right now, the way it's setup, there's a list of catagories, and under each catagory, a list of articles. Easy enough.
But, now I want to have an option to search for keywords that bring up different articles.
I realize that I will probably have to recode certain things which is fine.
How do I get started?? I have IIS 6.0 on Server 2003 with SQL Server 2005 Express installed.
I have no experience with databases, SQL, Access, etc.
Ram writes "Hi mate,
I am New in this forum.
I am working as developer in C++ and .net ( 4 Years).
I plan to do the SQL SERVER 2005 and do some Microsoft certification.
I really don't know where I can start and which source is suitable for me.
I already download the express edition and I play arround that.
could you all please help me for this.
I am awaiting your good response.
Cheer
Ram"
hi how to get the start day end day one row for each employee
like this
ID fname start day end day val_holiday
-------------------------------------------------------------------------------------
111 aaaa 15/03/2008 21/03/2008 1
222 bbb 02/05/2008 09/05/2008 3
333 ccc 03/04/2008 04/04/2008 3
-------------------------------------------------------------------------------------------------------- this is my table
ID fname new_date val_holiday
----------------------------------------------------
111 aaaa 15/03/2008 1
111 aaaa 16/03/2008 1
111 aaaa 18/03/2008 1
111 aaaa 19/03/2008 1
111 aaaa 20/03/2008 1
111 aaaa 21/03/2008 1
222 bbb 02/05/2008 3
222 bbb 03/05/2008 3
222 bbb 04/05/2008 3
222 bbb 05/05/2008 3
222 bbb 06/05/2008 3
222 bbb 07/05/2008 3
222 bbb 08/05/2008 3
222 bbb 09/05/2008 3
333 ccc 03/04/2008 4
333 ccc 04/04/2008 4
TNX
Hello
I have created a jon in the SQL Server Agent. This job will start 2 Integration Packages
One package for the etl, and one package for processing the cube
70 % of the time the job wil end success. But 30 % of the time the job wil fail.
I don't see anything in the log. This is the only message I see :
Executed as user: RLS01BIP01SYSTEM. The package execution failed. The step failed
anyone an idea??
Thx
Where would be a good place to start learning SQL? I know all the links in the e-mail that I got sent when I registered....but there not very help full.
View 1 Replies View RelatedHello,
I'm new in the field of Microsoft products and particularly with the Microsoft SQL Server.
So in the beginning I would like to ask some questions and to understand the base lines.
First thing is, I heard that there are several editions of Microsoft SQL Server 2005 : standard, workgroup, express, developer.
I would like to know what is the difference between each of them. I suppose that developer means that it should be good for a developers to use this edition, but compared to the Standard edition or to the Express edition what are the main differences.
In my case I'll use the server for a little, not complicated, database and may be there will be a migration to do from some old Access database to the new one (under SQL Server). Is the edition of the SQL Server important for doing that ?
And my last question is about the compatibility between the SQL Server 2000 and 2005. In fact the server that is in use currently is version 2000 but in the future months the administrator plans to upgrade the software to the 2005 version.
So I'm asking myself, if I start to develop for directly for 2005 version, is the product will be entirely compatible with the current version (2000)?
That's all I think for now.
Best regards,
Tonio
What is the parameters for starting & stoping sqlserver 2005 from start/run or from the command prompti tried 'sqlservr' & it didn't work
View 1 Replies View RelatedI had a small power outage and after that, SQL Server (2000) is not starting. I press the start button, it looks like it tries to do something (since all the buttons get disabled) and then its back to square one. I tried this from command line: sqlservr.exe -c -f but it does not help either.
I checked the SQL Server logs and this is what I found:
2007-08-08 10:05:09.63 spid3 Starting up database 'master'.
2007-08-08 10:05:09.63 spid3 Error: 823, Severity: 24, State: 6.
2007-08-08 10:05:09.63 spid3 08/08/07 10:05:09 Stack Overflow Dump not possible - Exception c00000fd E at 0x004436DD
2007-08-08 10:05:09.63 spid3 Address=4436dd Exception Code = c00000fd
I tried to google but could not find a solid solution.
Dear Friends,I cannot start my SQL Server 2005. When I'm trying to conect to local database it's showing me error:TITLE: Connect to Server------------------------------Cannot connect to WIN2006.------------------------------ADDITIONAL INFORMATION:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)This error mean that server not started.When I read more details (error log in SQL Configuration Manager) I found that the source of the problem - "master" table was compressed. It should be decompressed to start server. What's this? I'm seeing this kind of error first time. Need your advise guys!
View 9 Replies View RelatedSorry for the newbie question here:
I've just installed VS.NET and have installed MSDE. All has gone well so far. I followed the instructions for setting a db password during install and the installer seemed to do its job. The SQL Server Service Manager runs in the taskbar when I reboot but the status icon is a white circle... The status bar indicates that it is not connected.
How do I connect to the server?
hi may i know how do i load a report based on the entered value for start and end date?
I understand that i have to create parameters and dataset but how to make use of them?
After installing WebMatrix on my computer, I installed Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) in my computer, but I can't see MSDE on my Start menu. I am really new to this and don't know how to open MSDE, so I could work with it. Nothing displayed after I installed MSDE, such as the typical "Installation is complete."
Sorry for such a silly question, but please help me. How can I open MSDE from the Start menu. I have windows XP Home.
Any help or suggestions are truly appreciated.
All,
I am having a problem and cannot get my instance of SQL Server 2000 to
start. When I check the event viewer, this is the error I see:
Error: 9003, Severity: 20, State: 1
The LSN (6:308:1) passed to log scan in database 'model' is invalid.
Any ideas?
Karls
I have the following error when trying to test EMail from SQL.
I have logged onto the server and sent EMail using the SQLServer Service Account and the Profile is correct. This tells me that Outlook is working OK and the Exchange Server is sending OK. However, lookin on TechNet Q274330
mentions the error number but it's description is about Emailing an open file. I am not Emailing an open file.
Here's the error message.
xp_startmail 'eweb02mail'
Server: Msg 18025, Level 16, State 1, Line 0
xp_startmail: failed with mail error 0x80040106
Or right clicking on SQLMail and click on Test
xp_test_mapi_mail 0x80040106
Is there a way to start a job on another server from within a job?
View 1 Replies View RelatedHi !!
I am trying to configure SQL mail with POP3 (Lotus notes) mail client. I created the mail profile, I am sure that my login and service logon account is the same, i have mail client working on my work station (i.e i can send and recieve mails on my lotus notes ID). I am running NT 4.0 / SQl 7.0
When i do a test profile on SQL MAIL properties i get
"ERROR 22030,A MAPI ERROR(ERROR NUMBER 87)OCCURED, MapiLogonEx FAIILED DUE TOMAPI ERROR 87; INVALID PARAMETER"
When i try an start my SQL MAIL, i get,
" Error 17952: Failed to Start mail session: "
Where am i going wrong guys ?
any insight would be apprecieted !!
i am running sevice pack 3 on sql server 7.0 and 6a on NT 4.0
Thanks
Girish
Hello,
I made an Oracle query like
SELECT ID,PARENTID,NIVEL FROM EQUIPO
START WITH NIVEL=0
CONNECT BY PRIOR ID=PARENTID
is there a way to made the same query without using the Oracle
START WITH and CONNECT BY PRIOR statements?
thanks and regards
Marko
Hello everyone,
Any ideas of how to start a SQL Agent job, from OTHER-THAN Enterprise Manager !!!
Does Microsoft provide any stored procs, extended procs or any SDK that can help me force-start a scheduled task ?
There has got to be a way, coz' Enterprise Manager is doing it !!!!..
Any help is greately appreciated.
Thanks..
I got an error:
'Error 1069: The service did not start due to logon failure'
This occured when I tried to start mssqlserver from Control panel.
Thanks,
PN.
My SQL Server 7.0 was working for the last number of months until last night. When I came into the office this morning, it was down. I tried to restart it. It started and then shut itself down after about 10 seconds. I have tried to get the properties of the SQL Server, but I get an error message of "A connection could not be established to "the server name" - Communication link failure ConnectionWrite (WriteFile())..
Please verify SQL Server is running and check your SQL Server registration properties."
The computer has been rebooted, twice. SQL Server is set to automatically started on boot up.
Can someone shed some light on this?
Should I re-install SQL Server?
Thanks
Hi
I have a problem starting my SQL server. It all started when I had a database that has been trying to restore for days. I followed the instruction give by Kevin J McCarthy - (I did not follow the instruction correctly) - put a trace flag at start up flag 3608 -T3608. However, I did that within the Enterprise manager - under profile. Stopped the SQL server and tried to restart. It will not restart. I tried putting a /f flag at start up - this time under the NT service startup dialog box, I started the database, but I cannot access the SQL Server because of invalid login. In the NT event viewer, it has this message
Your profile was not successfully loaded, but you have been logged on with the default system profile. Please correct the problem and log off. (5)
I know I entered the correct login and password because I am the administrator. Please help!
Thanks in advance
Betty Li
Hello,
Does any one know how I can start and stop the sql services with the net use command?
Thanks,
Anthony
We're running sql 7.0 sp1 and both the sqlserver service and sqlserveragent service are running under local system account.
For some reason, the sqlserveragent service started failed with
"error 2140" - windows nt internal error
From event viewer, it saids it has some connection problem.
The sqlserver service has no problem.
All knowledge base material related to 6.5 resolution.
Would rebuilding the registry entry help ? I tested and rebuilding the registry did not regrant any registry permission, should it ?
Where should I look into if above doesn't work ?
Thx.
MSSQLSERVER won't restart. I can't uninstall SS7, either, because it says I have MSSEARCH running, which Task Manager can't kill (access denied, even to me the administrator). Tried changing the registry keys for MSSQL to MSSQL_old and then the install goes forward but fails at the end because some of the TEMPDB files cannot be activated. This trick worked on my Win98SE once, for the same problem. I ignorantly deleted IE4 from the server's C:drive because I needed more room to reinstall. I tried reinstalling the SS7 "components" (no apparent problem, except it detects that I have now installed IE5.5)(IE5.5 automatically installs to C:Program FilesMicrosoft or thereabouts, not C: where IE4 was, by the way). I was up to SP2 on SS7, and SP6 on NT4. The name of the server hasn't changed, but the name of the c:drive is new. Why would a new install care? I ran scandisk inbetween reboots as a caution, but the install always fails. Should I be choosing the default "allow 5 connections" rather than "5 per computer licenses"? TIA, Jeb
View 2 Replies View RelatedI got the following message in the Error log:
99/08/10 17:02:12.07 spid1 Recovering database 'model'
99/08/10 17:02:12.19 spid1 Recovery dbid 3 ckpt (259,1) oldest tran=(259,0)
99/08/10 17:02:12.28 spid1 102 transactions rolled forward in dbid 3.
99/08/10 17:02:12.28 spid1 3 transactions rolled back in dbid 3.
99/08/10 17:02:12.31 spid1 Error : 1105, Severity: 17, State: 2
99/08/10 17:02:12.31 spid1 Can't allocate space for object 'Syslogs' in database 'model' because the 'logsegment' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.
99/08/10 17:02:12.32 spid1 Unable to write CHECKPOINT record in database 3 because the log is out of space.
99/08/10 17:02:12.37 spid1 Clearing temp db
99/08/10 17:02:12.41 spid1 Error : 1105, Severity: 17, State: 2
99/08/10 17:02:12.41 spid1 Can't allocate space for object 'Syslogs' in database 'model' because the 'logsegment' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.
99/08/10 17:02:12.41 spid1 Unable to write CHECKPOINT record in database 3 because the log is out of space.
99/08/10 17:02:12.41 kernel Failed to create temp db
The SQL Server does not start.
I know I did not change any settings on the model database.........
Does anybody has any idea about what could have went wrong?
thank you.
Elias Akouri