I have setup SQL2000 Personal edition on my notebook.
I cannot connect to an existing SQL7 server on the network anymore. I
used to run SQL7 Desktop edition which ran just fine.
I also noticed that when I start my machine it take about 2 minutes
until the SQL service is started.
Any ideas why this is not working anymore?
Thomas Schoch
Elephant Software AG
Switzerland
How to restore a database dump file (.BAK) that backed up from SQL2000 server to a SQL 7.0 server?Please help.Saiyou
View 1 Replies View RelatedIs there a way I can load a SQL2000 DB backup onto a SQL 7 server? Thanks.
View 1 Replies View RelatedDoes a script that run with sql7 automatically run with sql2000?
I would like to know if my script will run if I change version.
Does anyone know of any reasons(or implications) why sql7 and sql2000 databases SHOULD NOT be on the same box???
Please advise.
Thanks-
Can anyone point me to a white paper/discussion on the issues of gaining access to SQL2000 data from a SQL7 installation? I'm about to upgrade servers from 7 to 2000, but a few of the servers exchange data bi-directionally and the upgrade to both servers at the same time would be problematic; thus the need at some point to get at the SQL2000 data from the SQL7 server.
Thanks,
AL
Somebody knows how to restore a database backup from SQL 7 in a Server with SQL 2000 Installed?
If somebody knows how to do it will save me a lot of work?
Thanks a lot.
Hi folks,
I'm currently on a project that'll move all my SQL7 databases into SQL2000. This is from a SQL7 production box to a new Windows2k SQL2000 box. I'm confused as to the proper way of moving all the objects over. What should i do? Any information. Thank You!
Is it possible to administer both SQL7 & SQL2000 databases from the same console ?? It's fine administering SQL 6.5 & SQL7, as 6.5 had no MMC, but it seems that SQL7 & SQL2000 have the same MMC.
Thanks,
Jazz.
Hi there,
I need to create a copy of a SQL 2000 database in another server which has SQL 7.0 installed. When I do a backup and restore, it gives me the following error :
Server: Msg 3154, Level 16, State 2, Line 1
The backup set holds a backup of a database other than the existing 'inventmast' database.
Server: Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
It seems to be like a downward compatability issue. Is there any other way to restore a sql2000 db onto sql 7 ??
Thanks
Paul
I'm upgrading a set of databases from SQL7 on one server (A) to SQL2000 on another server (B). I'd like input on the best method for moving the databases over (BCP, restore from BAK, etc), and in particular on moving the list of valid users (with default databases, permissions to databases, etc) and the DTS packages and Agent jobs.
When moving the databases, which are currently in code page 850, I might want to have them convert to the standard Latin-1 of SQL2000, though this isn't critical.
TIA,
Al
I have table with about 2 million rows. Everyday about 18000 rows are inserted. The table contain events for site security system so archiving is neccessary. I would appreicate any help or ideas. Thanks in advance.
View 2 Replies View RelatedI have a SQL Server 2000 box running two databases which was upgraded in error from SQL7.0 Basically we are no longer being given support as SQL2000 is not supported by the suppliers.
I therefore need to downgrade the box to SQL7.0 and was wondering if anyone had any opinions on the best method for doing this. Note that I do have a spare server to host the databases while I rebuild this server ( I am having to do a complete rebuild from scratch for other reasons ).
My thought is to transfer the databases to the spare server, rebuild the first box to SQL 7.0 and then perform a snapshot replication to transfer the data back.
Any thoughts on this would be gratefully received.
I have a backup of a SQL7 DB that i need to restore into SQL 2000. I only have the backup of the DB , i don't have access to the SQL7 server. When ever I try to restore the DB into SQL2000 nothing works, the tables and properties all restore properly and the data is there but i can't retrieve info from it. I'm trying to move a website DB from SQL7 to SQL 2000 for use with Cold Fusion. I know they're is issues with going from 7 to 2000 but i don't know what they are. If anyone could help me with this i would greatly appreciate it. I know I need to do some special steps or changes before it will work in 2000, does anyone know what these are?
Thanks in advance,
B
Hi, guys - looking for a bit of help/advice on moving a database fromSQL 7 to SQL 2000.We've a third party application which currently uses a SQL7 database.This database has a number of views which are owned by userINFORMATION_SCHEMA and are set as system tables. This user doesn'tactually have a login on the SQL server.We've tried the following to recreate the database on SQL2000, butwhatever we try, the views owned by INFORMATION_SCHEMA won't copy overfrom SQL7:(1) We tried the "Copy Database" wizard in SQL2000, but were gettingerrors when trying to actually copy the database (other steps workedfine).(2) We tried a restore to SQL2000 from our Legato Networker backup ofthe SQL7 database, but the views didn't come across.(3) We tried a backup from SQL7 and restore to SQL2000, but got themessage that the backup file contained a database other than the onewe wanted (it didn't - we checked the backup file several times byrestoring it to another SQL7 server).(4) We tried to import/export data from SQL7 to SQL2000, but the viewsowned by INFORMATION_SCHEMA weren't showing to add to the list ofobjects to take across.(5) We created the INFORMATION_SCHEMA login on SQL2000, and tried allrestores again, but still the views wouldn't go across.(6) We generated the SQL for all views in SQL7 and ran these onSQL2000, setting the owner to INFORMATION_SCHEMA, but wasn't surewhere to set the type to "system" (as opposed to "user).We're having problems running the third party application with aconnection to SQL2000, and want to rule out the lack of views, or viewownership, as the problem. Our third party vendor isn't coming upwith any solution in a hurry. Can anyone think of any reason why theviews are coming across when the database is restored to SQL2000?Thanks for your help.
View 1 Replies View RelatedCan anyone tell me of an EASY way to migrate a a database from a SQL 7 server to a SQL 2000 server (two different machines)?
Everything that I have found is only for upgrading SQL 7 to SQL 2000 and this isn't what I need.
Two groups in our company merged into one. The first group has a SQL 7 server that the lease is about to expire on and the second group (mine) has a newer SQL 2000 server that we need to move all of the databases to.
I have tried DTS. It failed. I tried backing up the 7 server and restoring to the new server. It failed.
Are there any other suggestions?
Thanks,
Steve
Does anyone know of a good whitepaper detailing SQL7 to SQL2000 migration?
Thanks, I really appreciate your help.
--Alex
Hi all
just a quick question for you. has anyone had any problems restoring a SQL7 database to a SQL server 2000?
is there anything special you have to do to get it working?
thanks for your time.
Andrew.
I'm attemting to replicate from a SQL7 box to SQL2000.
The snapshot works fine, but it fails when it tries to push the subscription to the SQL2000 box with a trust error (I don't recall the exact message). I noticed that it fails when Enterprise Mgr is configured as: "Tools/Replication/Configure Publishing, Subscribers and Distribution", Subscriber Tab, "Impersonating SQL Service Agent". It works if I change to "SA".
This is only the case when we replicate from SQL7 to SQL2K. SQL7 to SQL7 works fine with "Impersonating". Has anybody seen this behavior? Any workarounds, other than using SA?
Im using MS SQL7 as database software ,but now I plan to upgrate SQL7 to SQL2000 . I would like to know that are there any affect on the old database that already use with sql7 after I upgrade to MSSQL2000 ?
Thanks
I'm attemting to replicate from a SQL7 box to SQL2000.
The snapshot works fine, but it fails when it tries to push the subscription to the SQL2000 box with a trust error (I don't recall the exact message). I noticed that it fails when Enterprise Mgr is configured as: "Tools/Replication/Configure Publishing, Subscribers and Distribution", Subscriber Tab, "Impersonating SQL Service Agent". It works if I change to "SA".
This is only the case when we replicate from SQL7 to SQL2K. SQL7 to SQL7 works fine with "Impersonating". Has anybody seen this behavior? Any workarounds, other than using SA?
Hi
What connection string should i use to connect to a remote SQL2000 server over the internet??
Thanks
The following query runs fine on sql 7.0 but it kind of hangs/keeps running without any output on sql server 2000
---------------------
Set @cmd = 'Update ABCD Set
'+@day+'_LB = IsNull(LB,0),
'+@day+'_UT = IsNull(UNIT,0)
From tempData as T
Where T.STORE_NUM = ABCD.STORE_NUM And T.ITM_ID = ABCD.UPC'
execute (@cmd)
------------------------------------
But if we hard code the @day parameter and run the query like this it runs very fast on sql 2000....
Update ABCD Set THIRD_LB = IsNull(LB,0),
THIRD_UT = IsNull(UNIT,0)
From tempData as T
Where T.STORE_NUM = ABCD.STORE_NUM And T.ITM_ID = ABCD.UPC
------------------------------
I have problem connecting to a SQL 2000 server that is hosted on a Windows 2003 server. My application uses classic ASP with VB6 components. VB6 components connect to SQL server and return data to ASP application. Everything was working fine when the application and SQL server was hosted on NT machine. Recently we have shifted to Windows 2003 server. Since then we could not establish connection to SQL2000.
I'm using UDL as connection string.
IIS and SQL2000 hosted on the same machine with Windows 2003 OS.
This seems to be a security issue. Earlier I faced this issue for a .net application which I resloved adding a domain account to both SQL server and IIS directory security.
Request your input to solve this problem.
Sunandajit Ray
Infrasoft Technologies Limited
May i know whether SQL2000 is compatible with vb.net 2005?
I cant find OLEDBDataAdapter in vb.net 2005, any ways to connect SQL 2000 to vb.net 2005?
An unknown person at a client's site installed IIS on a production SQL Server. I would like to remove it (it's not being used and the service is shut down). Does anyone know of any troubles with uninstalling IIS? Will the removal also hose SQL?
Thanks in advance?
Steve
How can I copy a SQL 7 database from one server to another? Please tell me all the ways because I've tried the obvious and it doesn't work. (backup and restore - won't go from one server to another, DTS transfer object Wizard - does a whole pile of errors and doesn't do stored proceedures and trigures). Thanks for help in advance. Also, what is the email address to post to the listserv and where is the FAQ for SQL7? Most of my listserv's tell you where to post right at the bottom of the digest I get - any chance you guys would do that with this list? Thanks again.
View 6 Replies View Relatedi have sql2000 & sql2005 on the same machine. I am unable to register my localhost in sql2000, get an access denied error. How can I make my localhost use sql2000 database?
View 1 Replies View RelatedIf I change the network name of a machine running MS SQL 7, will the SQL server still work afterwards?
If not, where can I find the procedure to achieve this?
thanks for your suggestions!
Bart Vierbergen
Anyone of how to link a SQL2K server to a SQL7.0 server ...
I have tried and the two servers from the NT level can see and talk to each other ... but trying to link the servers is not working ...
Thanks
Hello all,
Is there any special procedure to install a SQL7 (plus sp3) and a SQL8 server on a Windows 2000 Server.
I did succed installing both of them, but all of my applications are behaving strangely ()error msg ect)...So I may supose that there some kind of predefined process to have those kind of installation working properly..?
Any idea would be welcomed !
Thanks a lot in advance,
Regards,
Benj.
Can you please advise on how to copy tables from DB1 to DB2 on the same SQL 7 Server. The programer had me drop the tables from DB2 and wants me to copy the tables from DB1 to DB2.
Thanks for any help.
I'm having a problem connecting with a Java application but I CAN connect using my .Net application - the user name and password are the same for both (using the same database on SQL Server Express 2005).
The error I get is: "com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "CORNERS" requested by the login. The login failed." An interesing note - I get the same message if the database is not running.
SQL Server Express 2005 is installed in mixed mode.
Here is my connection string in the .Net appplication: <add key="connectString" value="Server=(local);UID=sa;PWD=myPasswd;Database=CORNERS" />.
These are my values in my Java app web.xml -
<init-param>
<param-name>DBDriver</param-name>
<param-value>com.microsoft.sqlserver.jdbc.SQLServerDriver</param-value>
</init-param>
<init-param>
<param-name>DBURL</param-name> <param-value>jdbc:sqlserver://localhostsqlexpress:1055;databaseName=CORNERS</param-value>
</init-param>
<init-param>
<param-name>DBUser</param-name>
<param-value>sa</param-value>
</init-param>
<init-param>
<param-name>DBPwd</param-name>
<param-value>myPasswd</param-value>
</init-param>.
And yes, the port is 1055 - I checked to find it.
I am using Microsoft SQL Server 2005 JDBC Driver 1.0 (sqljdbc_1.0.809.102).
Does anyone have any idea what is wrong so that the login fails in the Java application but works in the .Net application?