SQL2005 SP1 May Fail On Integration Services
Jun 20, 2006
I ran across this issue the other day and thought it might be helpful to others who have or will experience the issue.
When you install Microsoft SQL Server 2005 Service Pack 1 (SP1) on a computer that is already running SQL Server Integration Services (SSIS), the SSIS service will not start, and the following error message is logged in the system event log:
The service did not respond to the start or control request in a timely fashion
http://support.microsoft.com/?kbid=918644
Build 2153 Post SP1 Hotfixes need to be installed.
http://support.microsoft.com/kb/918222/
View 6 Replies
ADVERTISEMENT
Jun 16, 2015
We run std 2008 r2. I'm trying out the commandtimeout property of an oledb source. I set it to 30 expecting 30 seconds. if connection and or execution exceed that threshold, will the pkg fail? Either way is there a way I can detect that the threshold was exceeded?
View 3 Replies
View Related
Nov 4, 2015
I have an Excel file which contains some data. I want to load that into a SQL server Table. Here are my conditions :
1. If the table doesn't have any matching records from the Excel file, then my DFT should load the data from that Excel to the Dest Table.
2. If the table has even one or more matching records, then the DFT should not process at all, instead I should send an email to the business stating that there are some matching records and hence the package is not process...ed.
P.S. If i use Lookup, I have two matching and non-matching output. which will process the non matching records into the table and matching can be redirected to any flat/Excel file. But i don't want to do this. I just want to lookup the Sql Server table and excel.
It'll be good if there is an additional option in the Lookup "Fail component on matching records".
View 3 Replies
View Related
Jul 1, 2015
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies
View Related
Aug 1, 2007
Windows 2003 SP2 Updata MS SQL 2005 from SP1 to SP2 fail.
Hotfix_5.log
07/31/2007 23:15:32.745 ================================================================================
{..........................................
.........................................
........................................}
07/31/2007 23:15:54.236
07/31/2007 23:15:54.246 Product Enumeration Results:
07/31/2007 23:15:54.246 INF File Name: c:ace3346e16b7688715bb0ff855HotFixSqlxml4.inf
07/31/2007 23:15:54.246 baselinebuild = 1399
07/31/2007 23:15:54.246 build = 3042
07/31/2007 23:15:54.246 description = SQLXML4
07/31/2007 23:15:54.256 details = Service Pack for Microsoft SQLXML 4.0.
07/31/2007 23:15:54.256 installerlogpath = <PROGRAMFILESDIR>Microsoft SQL Server90Setup BootstrapLOGHotfix
07/31/2007 23:15:54.256 kbarticle = KB921896
07/31/2007 23:15:54.256 kbarticlehyperlink = http://support.microsoft.com/?kbid=921896
07/31/2007 23:15:54.266 lcid = 1033
07/31/2007 23:15:54.266 legalproductname = SQLXML4
07/31/2007 23:15:54.266 machinetype = x86
07/31/2007 23:15:54.266 package = HotFixSqlxml4
07/31/2007 23:15:54.266 packagetype = Hotfix
07/31/2007 23:15:54.276 productcode = {A188FCCF-E929-494D-B1F1-4313E02ACD52}
07/31/2007 23:15:54.276 productname = Redist9
07/31/2007 23:15:54.276 recommendinstall = 1
07/31/2007 23:15:54.276 relatedlinks = <LCIDSUPPORTDIR>FinalSQL2005Information.rtf
07/31/2007 23:15:54.276 servicepackname = Microsoft SQL Server 2005 Service Pack 2 Setup
07/31/2007 23:15:54.286 splevel = 2
07/31/2007 23:15:54.286 sqladminprovisioningtool = <PROGRAMFILESDIR_WOW>Microsoft SQL Server90Sharedsqlprov.exe
07/31/2007 23:15:54.286 supportdir = c:ace3346e16b7688715bb0ff855
07/31/2007 23:15:54.286 upgradecode = {D9CA3D82-6F1B-41A7-8141-B90ACA8F865B}
07/31/2007 23:15:54.286 version = 9
07/31/2007 23:15:54.286
07/31/2007 23:15:54.296 File Group Details: MSI
07/31/2007 23:15:54.296 cachedmsipath = <PROGRAMFILESDIR>Microsoft SQL Server90Setup BootstrapCache
07/31/2007 23:15:54.296 sourcepath = <SUPPORTDIR><PACKAGE>Files
07/31/2007 23:15:54.296 File Details: sqlxml4.msi
07/31/2007 23:15:54.296
07/31/2007 23:15:54.296 Instance Details: SQLXML4
07/31/2007 23:15:54.306 fullversion = 9.00.2047.00
07/31/2007 23:15:54.306 lcid = 1033
07/31/2007 23:15:54.306 productcode = {A188FCCF-E929-494D-B1F1-4313E02ACD52}
07/31/2007 23:15:54.306 qfelevel = 2047
07/31/2007 23:15:54.306 sp = -1
07/31/2007 23:15:54.316
07/31/2007 23:15:54.316 Product Enumeration Results:
07/31/2007 23:15:54.316 INF File Name: c:ace3346e16b7688715bb0ff855HotFixSqlxml4_x64.inf
07/31/2007 23:15:54.316 baselinebuild = 1399
07/31/2007 23:15:54.316 build = 3042
07/31/2007 23:15:54.316 description = SQLXML4
07/31/2007 23:15:54.326 details = Service Pack for Microsoft SQLXML 4.0.
07/31/2007 23:15:54.326 installerlogpath = <PROGRAMFILESDIR>Microsoft SQL Server90Setup BootstrapLOGHotfix
07/31/2007 23:15:54.326 kbarticle = KB921896
07/31/2007 23:15:54.326 kbarticlehyperlink = http://support.microsoft.com/?kbid=921896
07/31/2007 23:15:54.326 lcid = 1033
07/31/2007 23:15:54.336 legalproductname = SQLXML4 (64-bit)
07/31/2007 23:15:54.336 machinetype = x64
07/31/2007 23:15:54.336 package = HotFixSqlxml4_x64
07/31/2007 23:15:54.336 packagetype = Hotfix
07/31/2007 23:15:54.336 productname = Redist9
07/31/2007 23:15:54.346 recommendinstall = 1
07/31/2007 23:15:54.346 relatedlinks = <LCIDSUPPORTDIR>FinalSQL2005Information.rtf
07/31/2007 23:15:54.346 servicepackname = Microsoft SQL Server 2005 Service Pack 2 Setup
07/31/2007 23:15:54.346 splevel = 2
07/31/2007 23:15:54.346 supportdir = c:ace3346e16b7688715bb0ff855
07/31/2007 23:15:54.356 upgradecode = {F457D8E6-7686-437D-9B17-E21D45CCABD8}
07/31/2007 23:15:54.356 version = 9
07/31/2007 23:15:54.356
07/31/2007 23:15:54.356 File Group Details: MSI
07/31/2007 23:15:54.356 cachedmsipath = <PROGRAMFILESDIR>Microsoft SQL Server90Setup BootstrapCache
07/31/2007 23:15:54.356 sourcepath = <SUPPORTDIR><PACKAGE>Files
07/31/2007 23:15:54.366 File Details: sqlxml4_x64.msi
07/31/2007 23:15:54.366
07/31/2007 23:15:54.366 Product Enumeration Results:
07/31/2007 23:15:54.366 INF File Name: c:ace3346e16b7688715bb0ff855HotFixSQLServer2005_BC.inf
07/31/2007 23:15:54.366 baselinebuild = 1399
07/31/2007 23:15:54.376 build = 2004
07/31/2007 23:15:54.376 description = Backward Compatibility
07/31/2007 23:15:54.376 details = Service Pack for the Backward Compatibility components, including Data Transformation Services Runtime and SQL-DMO.
07/31/2007 23:15:54.376 installerlogpath = <PROGRAMFILESDIR>Microsoft SQL Server90Setup BootstrapLOGHotfix
07/31/2007 23:15:54.376 kbarticle = KB921896
07/31/2007 23:15:54.386 kbarticlehyperlink = http://support.microsoft.com/?kbid=921896
07/31/2007 23:15:54.386 lcid = 1033
07/31/2007 23:15:54.386 legalproductname = Microsoft SQL Server 2005 Backward Compatibility
07/31/2007 23:15:54.386 machinetype = x86
07/31/2007 23:15:54.386 package = HotFixSQLServer2005_BC
07/31/2007 23:15:54.396 packagetype = Hotfix
07/31/2007 23:15:54.396 productcode = {2243F21A-E132-44F7-BA13-024D0845C815}
07/31/2007 23:15:54.396 productname = Redist9
07/31/2007 23:15:54.406 recommendinstall = 1
07/31/2007 23:15:54.406 relatedlinks = <LCIDSUPPORTDIR>FinalSQL2005Information.rtf
07/31/2007 23:15:54.406 servicepackname = Microsoft SQL Server 2005 Service Pack 2 Setup
07/31/2007 23:15:54.406 splevel = 2
07/31/2007 23:15:54.406 sqladminprovisioningtool = <PROGRAMFILESDIR_WOW>Microsoft SQL Server90Sharedsqlprov.exe
07/31/2007 23:15:54.406 supportdir = c:ace3346e16b7688715bb0ff855
07/31/2007 23:15:54.416 upgradecode = {1E70C6C9-E1B7-4A74-BC8C-8EB5D010CEC9}
07/31/2007 23:15:54.416 version = 9
07/31/2007 23:15:54.416
07/31/2007 23:15:54.416 File Group Details: MSI
07/31/2007 23:15:54.416 cachedmsipath = <PROGRAMFILESDIR>Microsoft SQL Server90Setup BootstrapCache
07/31/2007 23:15:54.416 sourcepath = <SUPPORTDIR><PACKAGE>Files
07/31/2007 23:15:54.426 File Details: SQLServer2005_BC.msi
07/31/2007 23:15:54.426
07/31/2007 23:15:54.426 Instance Details: Backward Compatibility
07/31/2007 23:15:54.426 fullversion = 8.05.1704
07/31/2007 23:15:54.436 lcid = 1033
07/31/2007 23:15:54.436 productcode = {2243F21A-E132-44F7-BA13-024D0845C815}
07/31/2007 23:15:54.436 qfelevel = 1704
07/31/2007 23:15:54.436 sp = -1
07/31/2007 23:15:54.436
07/31/2007 23:15:54.446 Product Enumeration Results:
07/31/2007 23:15:54.446 INF File Name: c:ace3346e16b7688715bb0ff855HotFixSQLServer2005_BC_x64.inf
07/31/2007 23:15:54.446 baselinebuild = 1399
07/31/2007 23:15:54.446 build = 2004
07/31/2007 23:15:54.446 description = Backward Compatibility
07/31/2007 23:15:54.446 details = Service Pack for the Backward Compatibility components, including Data Transformation Services Runtime and SQL-DMO.
07/31/2007 23:15:54.457 installerlogpath = <PROGRAMFILESDIR>Microsoft SQL Server90Setup BootstrapLOGHotfix
07/31/2007 23:15:54.457 kbarticle = KB921896
07/31/2007 23:15:54.457 kbarticlehyperlink = http://support.microsoft.com/?kbid=921896
07/31/2007 23:15:54.457 lcid = 1033
07/31/2007 23:15:54.457 legalproductname = Microsoft SQL Server 2005 Backward Compatibility (64-bit)
07/31/2007 23:15:54.467 machinetype = x64
07/31/2007 23:15:54.467 package = HotFixSQLServer2005_BC_x64
07/31/2007 23:15:54.467 packagetype = Hotfix
07/31/2007 23:15:54.467 productname = Redist9
07/31/2007 23:15:54.467 recommendinstall = 1
07/31/2007 23:15:54.467 relatedlinks = <LCIDSUPPORTDIR>FinalSQL2005Information.rtf
07/31/2007 23:15:54.477 servicepackname = Microsoft SQL Server 2005 Service Pack 2 Setup
07/31/2007 23:15:54.477 splevel = 2
07/31/2007 23:15:54.477 supportdir = c:ace3346e16b7688715bb0ff855
07/31/2007 23:15:54.477 upgradecode = {7B6BF434-3C72-4DB3-8049-FEF31AEAFF9A}
07/31/2007 23:15:54.477 version = 9
07/31/2007 23:15:54.487
07/31/2007 23:15:54.487 File Group Details: MSI
07/31/2007 23:15:54.487 cachedmsipath = <PROGRAMFILESDIR>Microsoft SQL Server90Setup BootstrapCache
07/31/2007 23:15:54.487 sourcepath = <SUPPORTDIR><PACKAGE>Files
07/31/2007 23:15:54.487 File Details: SQLServer2005_BC_x64.msi
07/31/2007 23:15:54.497
07/31/2007 23:15:54.497 Product Enumeration Results:
07/31/2007 23:15:54.497 INF File Name: c:ace3346e16b7688715bb0ff855HotFixSqlWriter.inf
07/31/2007 23:15:54.497 baselinebuild = 1399
07/31/2007 23:15:54.497 build = 3042
07/31/2007 23:15:54.497 description = Microsoft SQL Server VSS Writer
07/31/2007 23:15:54.507 details = Service Pack for Microsoft SQL Server VSS Writer.
07/31/2007 23:15:54.507 installerlogpath = <PROGRAMFILESDIR>Microsoft SQL Server90Setup BootstrapLOGHotfix
07/31/2007 23:15:54.507 kbarticle = KB921896
07/31/2007 23:15:54.507 kbarticlehyperlink = http://support.microsoft.com/?kbid=921896
07/31/2007 23:15:54.517 lcid = 1033
07/31/2007 23:15:54.517 legalproductname = Microsoft SQL Server VSS Writer
07/31/2007 23:15:54.517 machinetype = x86
07/31/2007 23:15:54.517 package = HotFixSqlWriter
07/31/2007 23:15:54.517 packagetype = Hotfix
07/31/2007 23:15:54.527 productcode = {C0D2F614-5CE5-4DCB-8678-E5C9AF7044F8}
07/31/2007 23:15:54.527 productname = Redist9
07/31/2007 23:15:54.527 recommendinstall = 1
07/31/2007 23:15:54.527 relatedlinks = <LCIDSUPPORTDIR>FinalSQL2005Information.rtf
07/31/2007 23:15:54.527 servicepackname = Microsoft SQL Server 2005 Service Pack 2 Setup
07/31/2007 23:15:54.527 splevel = 2
07/31/2007 23:15:54.527 sqladminprovisioningtool = <PROGRAMFILESDIR_WOW>Microsoft SQL Server90Sharedsqlprov.exe
07/31/2007 23:15:54.537 supportdir = c:ace3346e16b7688715bb0ff855
07/31/2007 23:15:54.537 upgradecode = {65D8E1DF-6201-4B53-A0F9-E654F8E80F97}
07/31/2007 23:15:54.537 version = 9
07/31/2007 23:15:54.537
07/31/2007 23:15:54.537 File Group Details: MSI
07/31/2007 23:15:54.547 cachedmsipath = <PROGRAMFILESDIR>Microsoft SQL Server90Setup BootstrapCache
07/31/2007 23:15:54.547 sourcepath = <SUPPORTDIR><PACKAGE>Files
07/31/2007 23:15:54.547 File Details: SqlWriter.msi
07/31/2007 23:15:54.547
07/31/2007 23:15:54.547 Instance Details: Microsoft SQL Server VSS Writer
07/31/2007 23:15:54.547 fullversion = 9.00.2047.00
07/31/2007 23:15:54.557 lcid = 1033
07/31/2007 23:15:54.557 productcode = {C0D2F614-5CE5-4DCB-8678-E5C9AF7044F8}
07/31/2007 23:15:54.557 qfelevel = 2047
07/31/2007 23:15:54.557 sp = -1
07/31/2007 23:15:54.567
07/31/2007 23:15:54.567 Product Enumeration Results:
07/31/2007 23:15:54.567 INF File Name: c:ace3346e16b7688715bb0ff855HotFixSqlWriter_x64.inf
07/31/2007 23:15:54.567 baselinebuild = 1399
07/31/2007 23:15:54.567 build = 3042
07/31/2007 23:15:54.567 description = Microsoft SQL Server VSS Writer
07/31/2007 23:15:54.577 details = Service Pack for Microsoft SQL Server VSS Writer.
07/31/2007 23:15:54.577 installerlogpath = <PROGRAMFILESDIR>Microsoft SQL Server90Setup BootstrapLOGHotfix
07/31/2007 23:15:54.577 kbarticle = KB921896
07/31/2007 23:15:54.577 kbarticlehyperlink = http://support.microsoft.com/?kbid=921896
07/31/2007 23:15:54.577 lcid = 1033
07/31/2007 23:15:54.577 legalproductname = Microsoft SQL Server VSS Writer (64-bit)
07/31/2007 23:15:54.587 machinetype = x64
07/31/2007 23:15:54.587 package = HotFixSqlWriter_x64
07/31/2007 23:15:54.587 packagetype = Hotfix
07/31/2007 23:15:54.587 productname = Redist9
07/31/2007 23:15:54.587 recommendinstall = 1
07/31/2007 23:15:54.587 relatedlinks = <LCIDSUPPORTDIR>FinalSQL2005Information.rtf
07/31/2007 23:15:54.597 servicepackname = Microsoft SQL Server 2005 Service Pack 2 Setup
07/31/2007 23:15:54.597 splevel = 2
07/31/2007 23:15:54.597 supportdir = c:ace3346e16b7688715bb0ff855
07/31/2007 23:15:54.597 upgradecode = {E9031696-DD39-4C25-BAEB-425FF28279EA}
07/31/2007 23:15:54.597 version = 9
07/31/2007 23:15:54.607
07/31/2007 23:15:54.607 File Group Details: MSI
07/31/2007 23:15:54.607 cachedmsipath = <PROGRAMFILESDIR>Microsoft SQL Server90Setup BootstrapCache
07/31/2007 23:15:54.607 sourcepath = <SUPPORTDIR><PACKAGE>Files
07/31/2007 23:15:54.607 File Details: SqlWriter_x64.msi
07/31/2007 23:15:54.607
07/31/2007 23:16:19.753 Registry: Opened registry key "SystemCurrentControlSetControlSession Manager"
07/31/2007 23:16:19.783 Registry: Cannot read registry key value "PendingFileRenameOperations"
07/31/2007 23:16:19.813 Registry: Read registry key value "EnableErrorReporting", DWORD value = 1
07/31/2007 23:16:19.813 Registry: Read registry key value "CustomerFeedBack", DWORD value = 1
07/31/2007 23:16:20.714 Registry: Set registry key value "EnableErrorReporting", DWORD value = 1
07/31/2007 23:16:20.714 Registry: Set registry key value "CustomerFeedBack", DWORD value = 1
07/31/2007 23:16:20.774 Locked file: Checking for locked files
07/31/2007 23:16:45.530 Attempting to pause the 32 bit ngen queue
07/31/2007 23:16:46.371 Installing product: SQLTools9
07/31/2007 23:16:46.381 Installing instance: SQL Tools
07/31/2007 23:16:46.411 Installing target: MSTS0000
07/31/2007 23:16:46.411 Installing file: sqlrun_tools.msp
07/31/2007 23:16:46.451 Copy Engine: Creating MSP install log file at: C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log
07/31/2007 23:16:46.451 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
07/31/2007 23:16:46.451 Registry: Cannot read registry key value "Debug"
View 2 Replies
View Related
Nov 7, 2006
As part of Team Foundation Server the Integration Services are used. They are configured to start automatically but it doesn't. Status is "stopped". Trying to start the service manually fails too:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 07.11.2006
Time: 11:11:49
User: N/A
Computer: SDOSCARBUILDSRV
Description:
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
It uses default LogOnAs NT AuthorityNetworkService. Any idea what might be wrong and what to do?
Thanks
Hans-Peter
View 5 Replies
View Related
Jul 25, 2006
Message:
Cannot connect to server
additional information
- failed to retrieve data for this request.(microsoft.sqlserver.smoenum)
- connect to SSIS service on machine "server" failed:
error loading type library/dll
- connect to SSIS service on machine 'server' failed :
error loading type library/dll
any idea?
soonyu
View 3 Replies
View Related
Sep 11, 2007
Hello friends.
I managed to design an Integration service package,but the desired level of performance has not been achieved(i.e it is performing slow).
So I want to know what are the best practices for optimized solution .
In my package I'm exreacting data from XML file and Storing it in SQL server database with some processing dring data flow.
I'm using
1) Two Script Task Control -In these control,I m opening the connection to XML file through VB.net code and
iterating each record at a time.
2)Two OLE DB Command -Each fetched record from script task component is processed in OLEDB command through
stored procedure and then inseted into database.
3)One for Loop -This loop contains two script Task control and two OLEDB Command control,
(mentioned above),for fetching single record and inserting it in database.
4)One derived Column
5)One Multicast
6)One Character Map
7)One OlEDB Source
As with my current performance I'm able to insert one record in every .5 second (Which is much below to acceptable limits)
Is control lying disabled on SSIS designer pane also affect the performance of execution.
View 4 Replies
View Related
Mar 6, 2006
I have an application that runs as a windows service that uses an ODBC connection. I recently upgraded
the database from MSDE -> Sql Express.
Everything works fine (connectivity, etc) when I start my application manually. When I attempt to start as
a service I get connection timeouts. After a small window of time, I can rerun my service and things connect
just fine.
As a workaround I'm planning on having my service connect, fail, slep 5 seconds and then attempt a 2nd connection.
I really hate to do this and was wondering if anyone had any ideas. Below is the error log I get after I reboot
my PC.
I'm attempting to connect as: "TestMachineNameLocalServerUserNameHERE" to the DB of "MyDatabase". (Names have been
changed so I don't catch flack from my company for posting specific details :))
Connection is done via ODBC via a system DSN to "localhost". I can sucessfully test connect here, but I can only
do this after the services have all started.
Any ideas?
Thanks,
Andy
========================================================================================
========================================================================================
Error log after startup
========================================================================================
========================================================================================
2006-07-06 08:09:39.00 Server Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Oct 14 2005 00:33:37
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2006-07-06 08:09:39.00 Server (c) 2005 Microsoft Corporation.
2006-07-06 08:09:39.00 Server All rights reserved.
2006-07-06 08:09:39.00 Server Server process ID is 460.
2006-07-06 08:09:39.00 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2006-07-06 08:09:39.00 Server This instance of SQL Server last reported using a process ID of 3188 at 7/6/2006 8:08:04 AM (local) 7/6/2006 12:08:04 PM (UTC). This is an informational message only; no user action is required.
2006-07-06 08:09:39.00 Server Registry startup parameters:
2006-07-06 08:09:39.00 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2006-07-06 08:09:39.00 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2006-07-06 08:09:39.00 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2006-07-06 08:09:39.09 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2006-07-06 08:09:39.09 Server Detected 1 CPUs. This is an informational message; no user action is required.
2006-07-06 08:09:39.34 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2006-07-06 08:09:39.35 Server Database Mirroring Transport is disabled in the endpoint configuration.
2006-07-06 08:09:39.37 spid5s Starting up database 'master'.
2006-07-06 08:09:39.79 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2006-07-06 08:09:40.09 spid5s SQL Trace ID 1 was started by login "sa".
2006-07-06 08:09:40.29 spid5s Starting up database 'mssqlsystemresource'.
2006-07-06 08:09:41.17 spid8s Starting up database 'model'.
2006-07-06 08:09:41.17 spid5s Server name is 'TestMachineName'. This is an informational message only. No user action is required.
2006-07-06 08:09:41.18 spid5s Starting up database 'msdb'.
2006-07-06 08:09:41.48 Server A self-generated certificate was successfully loaded for encryption.
2006-07-06 08:09:41.48 Server Server is listening on [ 'any' <ipv6> 1433].
2006-07-06 08:09:41.50 Server Server is listening on [ 'any' <ipv4> 1433].
2006-07-06 08:09:41.50 Server Server local connection provider is ready to accept connection on [ \.pipeSQLLocalMSSQLSERVER ].
2006-07-06 08:09:41.50 Server Server local connection provider is ready to accept connection on [ \.pipesqlquery ].
2006-07-06 08:09:41.50 Server Dedicated administrator connection support was not started because it is not available on this edition of SQL Server. This is an informational message only. No user action is required.
2006-07-06 08:09:41.51 Server The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2006-07-06 08:09:41.51 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2006-07-06 08:09:42.29 Logon Error: 18456, Severity: 14, State: 16.
2006-07-06 08:09:42.29 Logon Login failed for user 'TestMachineNameLocalServerUserNameHERE'. [CLIENT: <local machine>]
2006-07-06 08:09:42.29 Logon Error: 18456, Severity: 14, State: 16.
2006-07-06 08:09:42.29 Logon Login failed for user 'TestMachineNameLocalServerUserNameHERE'. [CLIENT: 192.168.1.31]
2006-07-06 08:09:43.48 Logon Error: 18456, Severity: 14, State: 16.
2006-07-06 08:09:43.48 Logon Login failed for user 'TestMachineNameLocalServerUserNameHERE'. [CLIENT: <local machine>]
2006-07-06 08:09:43.48 Logon Error: 18456, Severity: 14, State: 16.
2006-07-06 08:09:43.48 Logon Login failed for user 'TestMachineNameLocalServerUserNameHERE'. [CLIENT: <local machine>]
2006-07-06 08:09:43.89 Logon Error: 18456, Severity: 14, State: 16.
2006-07-06 08:09:43.89 Logon Login failed for user 'TestMachineNameLocalServerUserNameHERE'. [CLIENT: <local machine>]
2006-07-06 08:09:44.00 Logon Error: 18456, Severity: 14, State: 16.
2006-07-06 08:09:44.00 Logon Login failed for user 'TestMachineNameLocalServerUserNameHERE'. [CLIENT: <local machine>]
2006-07-06 08:09:44.15 spid8s Clearing tempdb database.
2006-07-06 08:09:44.21 Logon Error: 18456, Severity: 14, State: 16.
2006-07-06 08:09:44.21 Logon Login failed for user 'TestMachineNameLocalServerUserNameHERE'. [CLIENT: <local machine>]
2006-07-06 08:09:44.25 Logon Error: 18456, Severity: 14, State: 16.
2006-07-06 08:09:44.25 Logon Login failed for user 'TestMachineNameLocalServerUserNameHERE'. [CLIENT: <local machine>]
2006-07-06 08:09:44.96 Logon Error: 18456, Severity: 14, State: 16.
2006-07-06 08:09:44.96 Logon Login failed for user 'TestMachineNameLocalServerUserNameHERE'. [CLIENT: <local machine>]
2006-07-06 08:09:44.96 spid8s Starting up database 'tempdb'.
2006-07-06 08:09:45.32 spid5s Recovery is complete. This is an informational message only. No user action is required.
2006-07-06 08:09:45.32 spid11s The Service Broker protocol transport is disabled or not configured.
2006-07-06 08:09:45.32 spid11s The Database Mirroring protocol transport is disabled or not configured.
2006-07-06 08:09:45.46 spid11s Service Broker manager has started.
2006-07-06 08:09:46.00 spid51 Starting up database 'MyDatabase'.
2006-07-06 08:09:46.10 spid51 Recovery is writing a checkpoint in database 'MyDatabase' (6). This is an informational message only. No user action is required.
View 4 Replies
View Related
Jul 4, 2007
Why I am not able to start the Analysis Services Engine again as the error message from event viewer as:
Event Type: Error
Event Source: MSSQLServerOLAPService
Event Category: (289)
Event ID: 0
Date: 04/07/2007
Time: 10:45:48
User: N/A
Computer: computer_name
Description:
The service cannot be started: Message-handling subsystem: The message manager for the default locale cannot be found. The locale will be changed to US English. Message-handling subsystem: The message manager for the default locale cannot be found. The locale will be changed to US English. The following system error occurred: The filename, directory name, or volume label syntax is incorrect. . File system error: Error occurred during the creation of directory: '\?'.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
On SQL Server, when I start the Analysis services, the error message is : The SQL Server Analysis Services (MSSQLSERVER) service on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the performance logs and Alerts service.
Why is that? That is really frustrated and please any of you give me any advices or help on it. Thanks a lot in advance.
With best regards,
Yours sincerely,
View 8 Replies
View Related
May 2, 2008
We find that if we deploy the OLAP database with a different name on the test server, then regardless of how we change the connection string provided to the SSIS package that processes the cube, then the package fails to connect to the database. To clarify:
In development the OLAP database is called MyOlapDB and the source database is called MySqlDB. Both are on the same machine. When the the application is built and released for test, the test team install the databases on a replica of the production environment (i.e. web app on one machine, OLAP DB on another and SQL database on yet another). They also, quite rightly, implement the new test databases so they incorporate the build version number. So, MyOlapDB123 and MySqlDB123 are both from build 123.
This is when the problems start. Regardless of how the connection string is specified in the job that processes the cube, the SSIS integration package fails with the error:
[Analysis Services Execute DDL Task] Error: Errors in the metadata manager. Either the database with the ID of 'MyOlapDB' does not exist in the server with the ID of 'OurTestServer', or the user does not have permissions to access the object.
We have tried config files and job properties, but neither work. Also, simply attempting to run the package using the DTEXECUI does not work either.
Looking inside the XML of the package, we clearly see the ConnectionManager object which has the original connection string, which is
Data Source=localhost;Initial Catalog=MyOlapDB;Provider=MSOLAP.3;Integrated Security=SSPI;Impersonation Level=Impersonate;
However, editing the initial catalog here still does not solve the problem. Searching the XML for the string MyOlapDB reveals the OLAP database name in two other places - both within the object data of the two Analysis Services Execute DDL tasks.
Anyone know how to solve this problem without having to hack the XML of the package?
View 4 Replies
View Related
Mar 23, 2007
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
View 5 Replies
View Related
Oct 11, 2007
Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:
"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"
The cube name is not specific, it will fail and any of my cubes could be in the error log
If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.
I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.
When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.
I've done the following with no effect.
" Have run via AS and works fine
" No specific cube it fails on
" Have created a Dimension only package, same problem
" Changed the maxmemorylimit
" Changed the connections to localhost
" Memory DOES NOT max out on server
Server Specs:
Windows Server 2003 Standard + Service Pack 2
4GM ram, 2GB paging file
SQL Server 2005 + Service Pack 2
Can anyone help?
Andy
View 2 Replies
View Related
Apr 18, 2007
Does anybody know of a notification services using SSIS? Is it SendMail or otherwise? Is there a step-by-step practice on how to create one?
View 19 Replies
View Related
Oct 4, 2007
Hello,
We are running SQL2005, SP2.
We are having problems with the time it takes to export reports to Excel.
I am attempting to research the subject and find ways of solving the problem either by modifying the reports or make changes in the way we deliver them.
Either way my attempts at researching this at Microsoft.com and here at the forums have proven to be failures. There are many threads on the subject but with the time it takes to scroll through them all I have yet to find any that seem to relate to the specific issues we are having.
We have a report which is approximately 38 pages, sometimes less, sometimes more, in length. When attempting to export to Excel the process seems to take forever or time out. We can still close out the export attempt and return to the report, but the process of exporting to Excell seems to take forever.
Could anyone here provide me with links to pages either here at Microsoft.com, in the forums, or elsewhere where the factors involved in the exporting to Excell feature are addressed so that I can try to accomodate them as best as possible?
Thanks in advance.
I will continue to try and track down the information on my own but any assistance is appreciated.
View 1 Replies
View Related
Dec 15, 2005
hi
i try to restore a bak file from another sql2005 server to my sql2005 server, but it show the error message as below :
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Cannot open backup device 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupackup.bak'. Operating system error 5(error not found).
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3201)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3201&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
pls some one can help me ???
thanks
chaus
View 62 Replies
View Related
Oct 12, 2007
Can you open/use a database created in SQL2005 in SQL2005 Express?
Thanks for the help!
Max
View 4 Replies
View Related
May 24, 2007
Is there a way to give customers access to SSIS? They need to be able to create their own SSIS packages. Of course we have more then one customer so it would be nice to have modular security in place where they don't get to see customers abc and customer xyz packages. Only their own.
thanks!
View 6 Replies
View Related
May 8, 2008
Hi All,
I have created an integration services project (attached is a screenshot) that workes against the flat file (.DAT extension) and it does some manipluation in the data and then load it into the table. Everything works fine.
Now I want to get the name of my flat file source fille (which is a .DAT file) and then insert it in the table.
I am running th integration services against different .DAT files (only one file at one time) which are located on different locations.....so what I want is that, whenever I run the package it do the usuall processing and then while loading the data in to the destination table, it also load the name of the file into the destination table (lets called a field "FileName" of nvarchar type in the table "Comphistory")
How can I achieve this?
I am looking for a quick and easy help.
Thanks,
Zee
View 4 Replies
View Related
Jul 25, 2007
Problem
When you have a SSIS package that contains a connection from a data source, this connection is not updated when the data source changes based on a configuration change.
Situation :
A SSIS solution contains 3 configurations : Development, Test, Production. You can create those configurations in configuration manager of the solution.
The SSIS project contains one Data source. It doesn't really matter what type but I take SQL Server. The database server in development is SQL_DEV, in test is SQL_TEST and in production is SQL_PROD. Initially they are for all configurations the same. You can specify those values by changing the active configuration and then editing the Data source.
In the SSIS package (DTSX), you can create a connection manager based on a Data source.
If you change the Data source, the connection manager is also changed. If you change the Data source by changing the active configuration, the connection manager is not being updated.
If you think this isn't a big issue think big. We have 4 configuration, 10 shared Data sources and 25 DTSX packages. That would give a maximum of 1000 settings (4 x 10 x 25). Using this method it can be reduced to 40 (4 x 10). Of course this is a theoretical but it is very common to have the destination data source re-used on all packages, which still would be 100 settings (4 x 25)
Steps to reproduce
- create a new SSIS project
- In the solution explorer, create a new Data source named TestSource.
- In the connection managers window of Package.dtsx, create a new connection from a Data source.
- Make some changes in to TestSource.ds under the Data Sources. For example change the server or the database.
- Verify that those changes are also in the package.
- in the solution explorer, right click the solution and select configuration manager
- under active solution configuration, create a new configuration named test.
- Set the copy settings from : development
- Verify that Create new project configuration is checked.
- click OK and close.
- Notice that the active configuration is now Test
- Make some changes the Testsource.ds like a different server.
- Verify that those changes are also in the package.
- Make the development configuration as active.
- Notice that the Testsource.ds contains now the original settings.
- You will notice that the connection manager still contains the "test" settings and not the development settings.
- If you create a deployment utility it will still contains the wrong values.
with regards,
Constantijn Enders
View 1 Replies
View Related
Jun 16, 2006
Hi all,
Can someone explain to me why I am getting this kind of error though I am able to integrate all the data succeesfully to the next destination.
Ronald
SSIS package "Prescription.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Data Flow Task, SQL Server Destination [521]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 58, column 1. The destination column (PatientId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 27, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 26, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 25, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 24, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 23, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 22, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 21, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 20, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
View 3 Replies
View Related
Apr 25, 2006
Hi,
is Integration Services included in SQL Server Express?
In what version/module?
Thanks
just Do It
View 1 Replies
View Related
Jun 16, 2006
Hi all,
Can someone explain to me why I am getting this kind of error though I am able to integrate all the data succeesfully to the next destination.
I am trying to get the Prescription table from Access to SQL SERVER 2005 database
Ronald
SSIS package "Prescription.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Data Flow Task, SQL Server Destination [521]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 58, column 1. The destination column (PatientId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 27, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 26, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 25, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 24, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 23, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 22, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 21, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 20, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
View 1 Replies
View Related
Jun 20, 2006
I'm trying to use the new integration services and have found all kinds of help for it, but where is it? I can't find it. Is it in the SQL Server Management Studio?
View 1 Replies
View Related
Dec 27, 2005
I just upgraded my SQL 2000 server to SQL2005. I forked out all that money, and now it takes 4~5 seconds for a webpage to load. You can see for yourself. It's pathetic. When I ran SQL2000, i was getting instant results on any webpage. I can't find any tool to optimize the tables or databases. And when I used caused SQL Server to use 100% cpu and 500+MB of ram. I can't have this.Can anyone give me some tips as to why SQL 2005 is so slow?
View 3 Replies
View Related
Jan 4, 2007
Hi
We have Sql2005 x64 bit standard edition server installed in windows 2003 64 bit editio server,
currently due to buisness requirements we need to have sql2005 x64 bit enterprise edition, please let me know how do i do the upgrade or change.
is it possible to retain all our custom settings in the standard edition after changing to enterprise edition.
This has to be done for our production and very critical, please help
Thanks
Samuel I
View 4 Replies
View Related
Jul 25, 2007
Hi,
I want to insert datas from a txt-file into a sql-table.
Therefor i would use a xml-file for the structure!
How can i refer this xml-file to a measurement insertion task?
Tanks for your help and sorry for my bad english :rolleyes:
View 1 Replies
View Related
Jul 23, 2005
I am trying to know how to read many XML files within one data flowtask. I have many many files that I would like to apply to with thesame data flow so I need to know how to read them in and what taskshould I use under SQL 2005 DTS/Integration services.Thanks for your help!JON
View 1 Replies
View Related
Jan 14, 2008
Good morning,
I've to do a mining project and I intend to use the SSIS.
I've done a clustering plugin last year on analysis services and I also want to use it.
Let me try to explain the architecture of the process:
1) Receive data (read data from the database - these data are texts, actually)
2) Pre-process the data (transform the texts in a sparse matrix) using a new plugin
3) Call my clustering plugin and assign it to read the table created on the previous step
4) Call my KNN plugin to classify other pre-processed texts using the clusters found on the previous step as classes.
5) Show results.
Alright... It all running as a workflow on integration services
Here are my doubts:
A) How to view and use my plugin made for Analysis Services on Integration Services ? (is it possible or will I have to create another plugins from zero just to run on Integration Services ?)
B) Assuming the previous step is possible, how to modify my plugins to define inputs and outputs to do the correct communications between each plugin ? I think this is the most important question. Is it simple to do ? Is there any documented examples ?
Thanks a lot for your attention once more,
-Renan Souza
View 1 Replies
View Related
Apr 24, 2007
is it possible to use integration services to extract data from essbase?
View 3 Replies
View Related
Apr 5, 2007
Don't know what's the problem while installing SP 1 it just kills the Integration Services. Did any one had this issue?
Thank you - Ashok
View 6 Replies
View Related
Nov 16, 2006
When i try to connect to SQL 2005 integration services from object explorer i get connected (in the sense it shows in object explorer running packages stored packages ..)but when i try to exand any of these objects i get the following error
--------------------------------------------------------------------------------------------------
Failed to retrieve data for this request(Microsoft.sqlserver.smoEnum)
Additional information
The sql server specified in SSIS service configuration is not present or not available.This might occur when there is no default instance of Sql server on the computer. For more information see "config integeration services" in server 2005 books online.
Login time out expired
An error has occured while establishing a connection to the server.When connecting to the Sql server 2005, the failure may be caused by the fact that under default settings Sqlserver does not allow remote connections.
Names Pipes Provider: could not open a connection to Sql Server[2].(MsDtsSrvr)
----------------------------------------------------------------------------------------------------------
i have chkd remote connection settings and other settings but cant find a way out.
kindly provide some help
Thanks in advance
View 4 Replies
View Related
