SQL2005 Set Approle Has It Changed Behaviour
Jan 11, 2007
We are trying to convert our client applications from SQL2000 to SQL2005 back end.
We have noticed by trace that when setting implicit transactions on, and calling sp_set_approle in:
SQL2000 1) connect 2) Set Approle 3) do stuff which invokes an implicit transaction
SQL2005 1) connect 2) implicit transaction is invoked 3) we call set Approle [which fails because it cant be called in transaction].
does anyone know if Sp_set_approle has changed? perhaps it now updates a system table which invokes the start of an implicit transaction where previously it did not ? We have not changed our client code, so this is a change in SQL2005 behaviour or driver incompatibility issue.
Also interested to hear if anyone else is suffering issues. Cheers Iain
View 5 Replies
ADVERTISEMENT
Mar 3, 2006
hi ,
I recently moved from SQL 2000 to SQL 2005.
The client side is vb6 and using Dcom dll's hosted on the db server.
I have a table which has oninsert trigger
When the recordset is updated in the com class it throws the foll error :
"Row cannot be located for updating. Some values may have been changed since it was last read."
The same code was working with SQL 2000 !!!
Any clues.
implicit tran are off on the sql 2005 server.
Thanks in advance.
View 2 Replies
View Related
Jan 9, 2008
Inside a query how can I decide which application role is presentlty active?
View 7 Replies
View Related
Dec 15, 2005
hi
i try to restore a bak file from another sql2005 server to my sql2005 server, but it show the error message as below :
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Cannot open backup device 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupackup.bak'. Operating system error 5(error not found).
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3201)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3201&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
pls some one can help me ???
thanks
chaus
View 62 Replies
View Related
Oct 12, 2007
Can you open/use a database created in SQL2005 in SQL2005 Express?
Thanks for the help!
Max
View 4 Replies
View Related
Dec 27, 2005
I just upgraded my SQL 2000 server to SQL2005. I forked out all that money, and now it takes 4~5 seconds for a webpage to load. You can see for yourself. It's pathetic. When I ran SQL2000, i was getting instant results on any webpage. I can't find any tool to optimize the tables or databases. And when I used caused SQL Server to use 100% cpu and 500+MB of ram. I can't have this.Can anyone give me some tips as to why SQL 2005 is so slow?
View 3 Replies
View Related
Jan 4, 2007
Hi
We have Sql2005 x64 bit standard edition server installed in windows 2003 64 bit editio server,
currently due to buisness requirements we need to have sql2005 x64 bit enterprise edition, please let me know how do i do the upgrade or change.
is it possible to retain all our custom settings in the standard edition after changing to enterprise edition.
This has to be done for our production and very critical, please help
Thanks
Samuel I
View 4 Replies
View Related
Sep 19, 2007
I am unable to install 32-bit SQL Server Integration Services on the server due to something that was left behind by the 64-bit version.
I've uninstalled SQL Server 2005 64-bit and when I try to install the 32-bit version of Integration Services, I get this error: "Failed to install and configure assemblies C:Program Files (x86)Microsoft SQL Server90DTSTasksMicrosoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2146233087 Error message: Unknown error 0x80131501 Error descrition: FATAL: Could not find component 'Microsoft.SqlServer.Dts.Task.MessageQueueTask.ServCompMQTask' we just installed."
I can't seem to figure out how to resolve this problem with the COM+ and I can't remember if Integration Services is required.
Can anybody please advise?
View 1 Replies
View Related
Jul 8, 2007
Hello,
I have a vb program that include a dts package that has been saved to vb with sql2000 dts wizard and works very good.
Now that I upgrade my website to sql2005, this vb dts package doesn't work.
The error I get is:
Microsoft Data Transformation Services (DTS) Package
Invalid STDGMEDIUM structure
(Microsoft Data Transformation Services (DTS) Package (80040066): Invalid STDGMEDIUM structure
) (Microsoft SQL-DMO (ODBC SQLState: 42000) (80004005): [Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near ')'.)
I searched in the internet how to make dts package in sql2005 and save it to vb and found no information about it.
What Can I do to get the vb code of the dts package I create in sql2005 or how do i migrage the sql2000 vb dts package code to sql2005?
Thanks,
Kubyustus
View 4 Replies
View Related
Oct 3, 2006
This is the actual statement displayed from Response.Write in classic ASP. INSERT INTO WOTasks (WoNum,TaskNum,TaskDesc,TaskMemo,Account,ModifyDate,Estimate,TaskHours,Unit,UnitCost,TotalCost) SELECT '06-012497',TaskNum,TaskDesc,TaskMemo,Account,'2006-Oct-3',1,TaskHours,Unit,UnitCost,TotalCost FROM Tasks WHERE procnum = '000002' There are 4 records returned from the SELECT part of the statement. In some situations, 4 records are inserted to WOTasks table, in others, only 1 record is inserted. I can't find out why 1 record, instead of 4, record is inserted. A form page submits the form to the save page using post method. The above statement is contained in the save page. When one of the form textbox is filled, 1 record is inserted. When the textbox is not filled, 4 records are inserted. You may think the textbox has something to do with the behaviour. I also think so but the content of the textbox does not affect the sql statement. In both cases, the insert statement is the same. In the actual codes, only strings in quotes are variables and the rest are hardcoded. When I run the statement in SQL Server, 4 records are affected. No such problem when connected with Access.The actual code belowSub AddTask(ByVal proc, ByVal wonum) Dim sSQL sSQL = "INSERT INTO WOTasks (WoNum,TaskNum,TaskDesc,TaskMemo,Account,ModifyDate,Estimate,TaskHours,Unit,UnitCost,TotalCost) SELECT '" & wonum & _ "',TaskNum,TaskDesc,TaskMemo,Account,'" & curDate & "',1,TaskHours,Unit,UnitCost,TotalCost FROM Tasks WHERE procnum='" & proc & "'" 'Response.Write sSQL:Response.End conn.Execute sSQL, , 128 End Sub
View 2 Replies
View Related
Feb 24, 2004
Might be out to lunch, but I can't figure why this is being ordered the way it is:
SELECT '1' as t
UNION ALL
SELECT 'A' as t
union all
SELECT '['as t
ORDER BY t
I'd expect it to be 1, A, [ but instead it's [, 1, A [ is ascii 91 which is greater than both 1 and A, so why does it come first?
Karl
View 2 Replies
View Related
Apr 13, 2006
Hi,
I am using MSDE and Analysis Services (lastest packs) and the same installation on the same machine has been working great for the last 18 months or so untill yesterday. Whenever I try to open a DTS (in order to edit it) the machine just goes into a coma.... I have tried to re-start many times but of no use.
Can someone kindly guide me what should I look for in order to solve this.
I will be very grateful for your help.
View 14 Replies
View Related
Jul 5, 2004
When I run the command:
exec master..xp_cmdshell 'NET USE'
from the analyzer the box responds there are no entries in the list.
After that, I run the command:
exec master..xp_cmdshell 'NET USE Z: /DELETE'
after which the box responds with a "network connection could not be found."
and that's all okay.
The weird thing is:
exec master..xp_cmdshell 'NET USE Z: \MACHINESHARENAME'
results in a "The local device name is already in use.".
The machine in this particular case is the box itself. I have no problem accessing other disks on other systems. I can see the share using the view command. There's no maximum on the share itself and I can connect to the share using another sql box with the same user.
I don't know why it won't budge, worked before like a charm. After six months or so it just stopped. Anyone seen/solved this behaviour?
thanx,
View 5 Replies
View Related
Dec 2, 2005
Hi there,
I wonder if one of you worthy folks can help me out with some strange behaviour exhibited by a piece of SQL. Its my first post here , so please be gentle. :)
Here is my simple example :-
<my test table>
create table test
(ind int,
message varchar(255))
insert into test (ind, message) values
(1,'date=01/06/2006')
insert into test (ind, message) values
(1,'date=20/12/2005')
insert into test (ind, message) values
(2,'test')
The first query is
select * from test t1
where t1.ind in (select max(ind) from test t2
where t2.ind = t1.ind
and t2.message like 'date=%' )
fine.... 2 rows
second query
select * from test t1
where t1.ind =1
and convert(datetime, (SUBSTRING(Message, CHARINDEX('=',Message,0)+1, 10)),103) > getdate()
fine same 2 rows...
but If I try to combine the 2 clauses in
select * from test t1
where t1.ind in (select max(ind) from test t2
where t2.ind = t1.ind
and t2.message like 'date=%' )
and convert(datetime, (SUBSTRING(Message, CHARINDEX('=',Message,0)+1, 10)),103) > getdate()
I get a
Server: Msg 241, Level 16, State 1, Line 1
Syntax error converting datetime from character string.
Please can anyone help me on this?
thanks
Simon
View 9 Replies
View Related
Jul 23, 2005
Hello All,The following script is reproducing the problem assuming you haveNorthwind database on the server.Please note it gives you the error message on line 12.USE tempdbGOsp_addlinkedserver 'Test17'GOsp_setnetname 'Test17', @@SERVERNAMEGOIF EXISTS (SELECT 1 FROM dbo.sysobjects WHERE id =object_id(N'[dbo].[This_works]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)DROP PROCEDURE [dbo].[This_works]GOCREATE PROCEDURE This_works@UseLinkedServer bit = 0-- WITH RECOMPILE -- Does not helpASSET NOCOUNT ONIF @UseLinkedServer = 1 -- Linked ServerBEGINIF EXISTS (SELECT 1 FROM dbo.sysobjects where id =object_id(N'[dbo].[Orders_TMP]') and OBJECTPROPERTY(id, N'IsUserTable')= 1)DROP TABLE dbo.Orders_TMPSELECT * INTO dbo.Orders_TMP FROM Test17.Northwind.dbo.OrdersENDELSE -- LocalBEGINIF EXISTS (SELECT 1 FROM dbo.sysobjects where id =object_id(N'[dbo].[Orders_TMP]') and OBJECTPROPERTY(id, N'IsUserTable')= 1)DROP TABLE dbo.Orders_TMPSELECT * INTO dbo.Orders_TMP FROM Northwind.dbo.OrdersSELECT 1 FROM dbo.Orders_TMP WHERE 1 = 2 -- Why do I need this line?ENDBEGIN TRANSACTIONSelect 'Line 25'SELECT COUNT(*) FROM dbo.Orders_TMPCOMMITgoIF EXISTS (SELECT 1 FROM dbo.sysobjects WHERE id =object_id(N'[dbo].[This_does_not]') and OBJECTPROPERTY(id,N'IsProcedure') = 1)DROP PROCEDURE [dbo].[This_does_not]GOCREATE PROCEDURE This_does_not@UseLinkedServer bit = 0-- WITH RECOMPILE -- Does not helpASSET NOCOUNT ONIF @UseLinkedServer = 1 -- Linked ServerBEGINIF EXISTS (SELECT 1 FROM dbo.sysobjects where id =object_id(N'[dbo].[Orders_TMP]') and OBJECTPROPERTY(id, N'IsUserTable')= 1)DROP TABLE dbo.Orders_TMPSELECT * INTO dbo.Orders_TMP FROM Test17.Northwind.dbo.OrdersENDELSE -- LocalBEGINIF EXISTS (SELECT 1 FROM dbo.sysobjects where id =object_id(N'[dbo].[Orders_TMP]') and OBJECTPROPERTY(id, N'IsUserTable')= 1)DROP TABLE dbo.Orders_TMPSELECT * INTO dbo.Orders_TMP FROM Northwind.dbo.Orders--SELECT 1 FROM dbo.Orders_TMP WHERE 1 = 2 -- Why do I need this line?ENDBEGIN TRANSACTIONSelect 'Line 25'SELECT COUNT(*) FROM dbo.Orders_TMPCOMMITGOPRINT 'This_works'EXECUTE This_works 0PRINT ' 'PRINT 'This_does_not'EXECUTE This_does_not 0Thanks for any help or hint,Igor Raytsin
View 8 Replies
View Related
Mar 23, 2007
We have an application that executes a few queries against an SQL Server 2005 (64-bit) database. Since there can be several instances of the application running at any given time, and parts of the logic must be serialized, we've been using sp_getapplock and sp_releaseapplock. This has all been working fine since RC1 on which the system was released. However, after installing SP2 about a week ago, we have been having problems. The serialized portion of the code almost always stall now.
To see what is happening we've been using both Management Studio and Profiler. We have two applications running, let's call them A and B. Both create a prepared statement which begin with a call to sp_getapplock and ends with sp_releaseapplock. In between some tables are queried and inserts may be made in others. The accessed tables are never used anywhere else but in the serialized code. This is what is happening:
Application A: Calls sp_getapplock.
Application A: Queries a table.
Application B: Calls sp_getapplock.
Application A: Inserts a row in a table.
Application A: Calls sp_releaseapplock.
Application B: Waits indefinitely (or at least more than 4 hours, after which we killed the spid).
Profiler cannot detect any deadlocks when this is happening. There are no blocking operations according to Management Studio. I can see the application lock having been set when I look at the spid for Application B in Management Studio.
Since this started to occur frequently after installing SP2 and had not been seen before, we are wondering if any changes has been made that could cause this behaviour? Has anyone else had problems using application locks, where a query would stall indefinitely waiting for the lock to be released? How then did you resolve it?
Any suggestions or ideas are welcome,
Thanks,
Lars
View 9 Replies
View Related
Feb 17, 2006
I were trying to achive paging through using a CTE etc, but ran into the following weither thing happening. The CTE allows me to use avariable as the ORder By field, although the CTE do not care at all what is in there? Have any one seen this or maybe can explain this?
USE AdventureWorks;
GO
DECLARE @SortExpression Varchar(50)
Set @SortExpression = 'SalesPersonID ASC';
WITH Sales_CTE (RowNumber, SalesPersonID, NumberOfOrders, MaxDate)
AS
(
SELECT
ROW_NUMBER() OVER(Order by @SortExpression) RowNumber,
SalesPersonID, COUNT(*), MAX(OrderDate)
FROM Sales.SalesOrderHeader
GROUP BY SalesPersonID
)
Select * From Sales_CTE;
WITH Sales_CTE1 (RowNumber, SalesPersonID, NumberOfOrders, MaxDate)
AS
(
SELECT
ROW_NUMBER() OVER(Order by SalesPersonID ASC) RowNumber,
SalesPersonID, COUNT(*), MAX(OrderDate)
FROM Sales.SalesOrderHeader
GROUP BY SalesPersonID
)
Select * From Sales_CTE1
View 1 Replies
View Related
Nov 20, 2007
When I run the package from business solution environment, DBdate cast converts my date column (correctly) into a European date format dd/mm/yyyy and as such is inserted into sql server table.
When I run a package as a job, the same date in inserted into the database as mm/dd/yyyy.
So, if I have 3rd January 2007 in the source, in the first case i'll find 03/01/2007 in the database.
When I run the package as a job, I find 01/03/2007 in the db.
The problem comes when I run different select statements - the 01/03/2007 behaves as if 1st March 2007
How can I avoid inserting of American data format into the db?
View 23 Replies
View Related
Aug 8, 2007
Hi,
In My report I have 2 drop down list called Cusip and Period as parameters and they are populated using a sproc
I have a list and in my list i have 2 textboxes which have the value First(Fields!FundNameNoFee.Value) and First(Fields!FundDescription.Value)
The Cusip drop list has the following values <All Cusips> whchi takes the Value Null, 33335454, 115544454.
If i give all cusips in preview mode Nothing populates in the report, but i just run the dataset i get 2 records with 33335454,1155445454.
and if i give individual cusip, the data shows up in the report...
So can some one tell me how can i show the values on the reports when All Cusips are selected....
Regards
Karen
View 3 Replies
View Related
Oct 11, 2007
Hi to all!
i had tried to install ads on a windows 5. i am able to connect to the pocket database. however when i trie to connect to the database that's on desktop i see a little window (probably a message) without anything and when i tap ok i see a message telling that the connection to the desktop database was not done! i had made the configuration before.
can you tell me what is going wrong?
View 1 Replies
View Related
Jan 22, 2008
I'm trying to use SetRange method on a table with multi-columns index, but I didn't get the result I was hoping for from the query.
Here is the DDL for the table
Code Block
CREATE TABLE [Products] (
[ProductId] INT IDENTITY(1,1) NOT NULL ,
[ArrivalDate] DATETIME ,
[Name] NVARCHAR(100) ,
[CategoryId] INT,
CONSTRAINT [PK_Products] PRIMARY KEY
(
[ProductId]
)
)
;
CREATE INDEX IDX_ProductArrival
ON [Products]
([ArrivalDate], [Name], [CategoryId])
;
--insert some sample data
Insert into [Products] ([ArrivalDate], name, categoryid) values ('2008-1-22 13:00:00', 'PC 1', 1);
Insert into [Products] ([ArrivalDate], name, categoryid) values ('2008-1-22 13:00:00', 'PC 2', 2);
Insert into [Products] ([ArrivalDate], name, categoryid) values ('2008-1-22 13:00:00', 'PC 3', 3);
And here is the code I'm using
Code Block
using System;
using System.Data.SqlServerCe;
using System.Data;
namespace ConsoleApplication1
{
class Program
{
static void Main(string[] args)
{
using (SqlCeConnection conn = new SqlCeConnection(@"data source=d:mydb.sdf"))
{
conn.Open();
int counter = 0;
using (SqlCeCommand cmd = new SqlCeCommand("products", conn))
{
cmd.CommandType = CommandType.TableDirect;
cmd.IndexName = "IDX_ProductArrival";
object[] start = new object[3];
object[] end = new object[3];
start[0] = new DateTime(2008, 1, 22, 0, 0, 0);
start[1] = "PC 2";
start[2] = 2;
end[0] = new DateTime(2008, 1, 22, 23, 59, 59);
end[1] = "zzzzzzzzzzzzzzz";
end[2] = 3;
cmd.SetRange(
DbRangeOptions.InclusiveStart | DbRangeOptions.InclusiveEnd,
start, end);
using (SqlCeDataReader reader = cmd.ExecuteReader())
{
while (reader.Read())
{
counter++;
}
}
}
conn.Close();
Console.WriteLine("Row count {0}", counter); //should show row count 2 but shows row count 3 instead
}
Console.ReadKey();
}
}
}
I'm setting the starting range to a date and a product name (PC 2) but it seems that the datareader only see the first array member and completely ignore the product name and show all 3 data instead of 2.
Am I missing something here?
Thanks
View 2 Replies
View Related
Oct 25, 2007
We have this webiste which uses SQL express as database engine. Sometimes certain features of the website stop working. Like membership provider and other database related things. I have described the problem in more details here: http://forums.asp.net/t/1172253.aspx
In consice the problem is: One query with fixed inputs does not always return the same results, though the data has not changed, you restart the SQL express and the problem resolives!
I think thats a problem with SQL express, because when you restart SQL express everything starts working. Our database is kinda big. Like above 500 MB with up to 50 concurrent users. And our machine got a 3.2 CPU with 512 MB of ram. And our application is the only application runing there.
What do you think please?
View 5 Replies
View Related
Aug 12, 2000
Hi...
Not sure what's wrong with the query or table, but I just can't get the result I want.
The column is varchar(35) and contains toll free no, like 18001234567...
But when I queried using the query below, I can't get any results. Same if I use 1*, 18*, 180*...
SELECT ... FROM ...
WHERE CONTAINS(toll_no, '"1800*"')
However, if I used 18001* I do get results.
Can anybody show me how to get result for these cases?
Thanks.
View 2 Replies
View Related
Oct 12, 2000
I have a scheduled job that inserts some records into a table. It fails with the following message,
Violation of PRIMARY KEY constraint 'PK_FuturesOut'. Cannot insert duplicate key in object 'FuturesOut'. [SQLSTATE 23000] (Error 2627) The statement has been terminated. [SQLSTATE 01000] (Error 3621). The step failed.
The strange thing about this is, if I copy the SQL statement from the job and paste it into Query Analyzer, it works without any modifications.
If anyone can explain this I would be most grateful.
View 2 Replies
View Related
May 12, 2006
Hi
If I have a view:
SELECT A,B
FROM tblTable
WHERE A = 1
And then I have a s-proc using that view:
SELECT *
FROM MyView
WHERE B > 6
My question: If I add an index to tblTable for the column B (not used in the view's WHERE clause, but used in the s-proc), will it have a performance improvement, because of the WHERE B > 6 on the view, assuming that this condition would benefit from the index if it were in the view itself.
I guess I could also put it this way: can an index on a column in a table improve the performance of a condition on a view using that table.
Thanks
Peter
View 2 Replies
View Related
Aug 3, 2007
I use bcp fairly often in SQLServer2000 but have never run across this before. In a 512 SQLCHAR column containing notes, when two spaces are encountered (i.e. ' '), bcp is replacing ' ' with '
'.
I figured it was a problem with my format file, but I have not found enough specific info on the MSDN site to resolve this.
This is my bcp command:
bcp "SELECT DivCode,CommCode,ContactID,substring(Notes, 0, 512) from frep.dbo.BeBackExtract" queryout "D:BeBackDetail.dat" -f "D:BeBackDetail.fmt" -e "D:BeBackDetailErrors.dat" -U user -P pass -S server
And format file:
8.0
4
1 SQLCHAR 0 2 "" 1 DIVCODE ""
2 SQLCHAR 0 3 "" 2 COMMCODE ""
3 SQLCHAR 0 10 "" 3 CONTACTID ""
4 SQLCHAR 0 512 "
" 4 NOTES ""
Has anyone seen this?
Incidentally I also tried using the REPLACE function which seems to work great until trying to replace 2 spaces with 1 space, in which case it doesn't do anything.
Thanks for any ideas -
View 1 Replies
View Related
Apr 20, 2004
Hi all
I have a DTS package that users of the database can run which basically acts like a 'live update' (as the database is based on a values produced from another system) and it takes roughly 30 or so seconds to run...
The dts package is not going to have a particularly large hit rate but i am interested in knowing what will happen if a user (user 1) attempts to run the package when it is in already in use by another user (user 2) ?
Will User 1 simply have to wait untill the package completes for User 1?
OR
Will a new seperate 'instance' of the package be used by User 1?
Any info would be very helpful
Cheers
View 2 Replies
View Related
Apr 13, 2007
Hi
Just tried to Run the Following statement in Query Analyzer
Select convert(varchar(9),convert(integer,1234567890))
The Output was an * (asterisk)
Can Some one Explain Y??
Thanks in advance
View 7 Replies
View Related
Jul 23, 2005
Hello all,I have what I hope is a simple question:Does SQL Server have an 'all-or-nothing' locking policy? Or does itacquire as many locks as it can and then sit and wait for the rest?Example:SELECT * FROM TABLE_A INNER JOIN TABLE_BON TABLE_A.dbid = TABLE_B.dbidNormally a SHARED lock would be acquired on both objects (pleasecorrect me if I'm wrong). But let's say TABLE_B was being updated byanother process at the same time, and so we couldn't get the sharedlock. Would the dbms go ahead and acquire the shared lock on TABLE_Aand then wait for the other lock, or would it not acquire any lock atall until locks on both TABLE_A and TABLE_B were available?I ask because I'm investigating a deadlocking problem that's drivingme mad :)Thanks,Tommy.
View 3 Replies
View Related
Jul 20, 2005
Hi,In order to establish a security enhanced SQL server setup, I triedto switch off network access by disabling all networking protocols,so that the server can only be reached through a pipe. Neverthelessthe server was visible in the network and could be accessed fromall clients. Does anybody know what is going on here?Georg
View 1 Replies
View Related
Jul 20, 2005
Hi Everybody,I have a complex view, that includes a "group by" clause. I'm tryingto join this view with a table, in a very simple query.The problem is that the optimizer is not using the table data as inputfor the view (I expect this because I have arguments for the table,but not for the view), but executing the view in a different step andthen joining to the table by a merge/hash join. This is obviously veryslow.I tried to force nested loops by using hints but it still doesn't usethe table data as input.Has anybody ever seen this?Thanks in advance...
View 3 Replies
View Related
Nov 14, 2006
Hi everyone,
I wonder if it's possible keep the connections previously opened in your Sql Management Studio.
I mean, I open it and connecting to sql1,sql2,sql3,etc.. without using queries or something like that and then, close and re-open again. What happens? Neither of them appearing again. If you create a project, of couse...but it's not the same, because when you create a .ssmssln project file is inteded for keep .Sql.
I'm talking about the same behaviour when you ran the old Enterprise Manager inside the Microsoft Management Console and you had the possibility of make groups and whatever.
View 1 Replies
View Related
Sep 20, 2007
I have 2 exact same sql tasks in different packages. Connection manager is defined for the same database for both. one of the sql task works, and other one throws out this error:
[Execute SQL Task] Error: Failed to acquire connection "pdsprod.pdsdataread". Connection may not be configured correctly or you may not have the right permissions on this connection.
this is completely mind boggling. I have compared both sql tasks for each and every property and they are exactly the same. what is going on?
by the way I am on 64 bit box with Run64bitruntime= false.
View 5 Replies
View Related
