SQL2005 Stored Procedures Don't Execute After Attach Database
Sep 19, 2006
While doing maintenance on a development server we detached a database and later reattached it to the same server.
For some unknown reason web services execute but return no results. There are no errors reported in event viewer. I connected to the database in Visual Studio 2005 and attempted to execute a simple select statement but it returns no row.
It appears to execute the stored procedure but does not return any data. I have cut and pasted the select statement into a View which does execute.
Lastly I just created a new store procedure to test the database and it also does not return any rows. This is all very strange.
Could use a few suggestions at this point.
Larry
View 2 Replies
ADVERTISEMENT
Apr 23, 2006
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which I have heard works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get the following error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Of course, some of the entries will be read only, since doctors have to sign off the charts and are not allowed to subsequently change them. But I should still be able to switch over to sql 2005?!?!?!?
Or... is there a way to attach the databases to SQLExpress manually?
Help pls?
View 1 Replies
View Related
Aug 7, 2007
Hello All,I tried to set the access permissions for debugging stored procedure by reading the articlehttp://msdn2.microsoft.com/en-us/library/w1bhybwz(VS.80).aspxandhttp://technet.microsoft.com/en-us/library/ms164014.aspxI have tried to add the role to sysaminas follows1)SELECT * FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_NAME = 'sp_sdidebug'(to find the sp)Error:--The stored procedure not found2)sp_addsrvrolemember 'Developmentswati.jain', 'sysadmin' though this is executed successfuly . Error is still persisting
Cannot debug stored procedures because the SQL Server database is not setup correctly or user does not have permission to execute master.sp_sdidebug.
View 3 Replies
View Related
Apr 22, 2006
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which the company says works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get an error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Or... is there a way to attach the databases to SQLExpress manually?
Help pls?
View 3 Replies
View Related
Jan 30, 2006
Hello, I need to use a if statement in stored procedures.
What I need to know is the proper syntax because anything I try does not work.
I need to check if 24 hours passed:
datediff(hh, Users.LastLogin, GetDate())
Should return the number of hours that has passed. I need to use this in the IF statement, and I need to check if it's > 24.
Thanks =)!
View 2 Replies
View Related
May 31, 2007
Hi All,
I'm just upgrading my business database to SQL 2005 and hit a problem when executing a stored procedure in the msdb database. Error message reading "EXECUTE permission denied on object 'sp_delete_job'".
Obviously this message tells me that I do not have permissions to execute stored procedures in the MSDB database.
In SQL 2000 I never had to mess around with permissions on this database as the security was already pre-configured.
I'm still familiarising myself with SQL 2005 so rather than making a finger in the air guess I'd like to understand how SQL 2000 was configured and the best solution for resolving this in SQL2005.
I'm really after some advice/suggestions!
View 5 Replies
View Related
Jan 14, 2005
Hello SQL Experts,
we've got a Windows Server 2003 environment with SQL Server 2000 Sp 3.
A stored procedure selects specific data from a user-table which depend on the user executing it. The users are granted execute permission on the stored procedure. But execution fails, if the user is not granted select permission on the user-table, too.
The problem is, that the user must not have the permission on all data in the user-table but on the data concerning him.
In earlier versions of SQL Server and Windows the execute permission has granted sufficient rights to select from the underlying tables. How can this be re-established?
The Owner of sp and table is dbo.
Thanks for your replies!
View 5 Replies
View Related
Oct 23, 2006
I tried this morning to check some of the system stored procedures and ran into trouble. Only four of them executed: sp_alterdiagram, sp_creatediagram, sp_dropdiagram and sp_helpdiagramdefinition. I could not check all the rest, I did it selectively. The typical error message was: Invalid object on RETURN statement. Some had syntactical errors.
sp_ActiveDirectory_Obj
Invalid object name 'sys.sp_ActiveDirectory_SCP' Line 171
sp_ActiveDirectory_SCP
Invalid object name 'sys.sp_ActiveDirectory_SCP' Line 171
sp_ActiveDirectory_Start
Invalid object name 'sys.sp_ActiveDirectory_Start' Line 19
Invalid object name 'sys.sp_add_agent_parameter' Line 60
Invalid object name 'sys.sp_add_agent_profile' Line 123
Invalid object name 'sys.sp_add_data_file_recover_suspect_db' Line 17
sp_addalias
Msg 102, Level 15, State 1, Procedure sp_addalias, Line 44
Incorrect syntax near '%'.
Msg 195, Level 15, State 10, Procedure sp_addalias, Line 64
'get_sid' is not a recognized built-in function name.
Msg 102, Level 15, State 1, Procedure sp_addalias, Line 78
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_addalias, Line 119
Incorrect syntax near '%'.
sp_bindefault
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 95
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 134
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 182
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 208
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 228
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 264
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 273
Incorrect syntax near '%'.
sp_databases
Invalid object name 'sys.sp_databases'. Line 6
sp_tables
Invalid object name 'sys.sp_tables'
Is there a chance that these errors are due to the fact that I executed them without parameters?
Thanks
View 2 Replies
View Related
Apr 24, 2007
HI,
would like to know how to give execute permissions for all the stored procedures in a database at one shot. please advise.
View 6 Replies
View Related
Jun 14, 2006
Hi
I am currently using SQL server 2005 express edition for a website I have created using Asp.Net 2.
For this website I call stored procedures that I have created in the databse to return any page data. However, I keep getting error messages say that the login does not have execute permission for the stored procedure.
In Sql Server 2005 there does not seem to be an easy way to grant permissions to a stored procedure as you add them. I say this because when I used Sql Server 2000 I would just add the stored procedure, rigth click on it and grant permission to the user.
Now this does not seem to be the case with the new version of sql server and I was just wondering whether there is now a new, easy way of doing this.
If anyone can point me in the right direction on this...
I have managed to get this working by going into the properties of the users atached to the database, adding a list of stored procedures to the "scalables" area and individually ticking the execute checkboxs. However, when I return to add a new stored procedure, the list has disapeared. Is this a bug with Sql server 2005?
Thanking you in advance
View 1 Replies
View Related
Oct 17, 2005
I have created multiple stored procedures that search different tables for similiar information.
Is it possible to have one main stored procedure that calls and executes each of these individual stored procedures and then use the UNION keyword to combine the results?
For example
Code:
CREATE PROCEDURE [dbo].[Return_Detail]
@IDVarChar(200)
AS
--Get the 1st Detail
EXECReturn_1st_Detail @ID = @ID
UNION
--Get the 2nd Detail
EXECReturn_2nd_Detail @ID = @ID
GO
View 2 Replies
View Related
Jul 23, 2005
How can i add Execute permissions on the Stored Procedures under thecreated user permission iusing SQLDMO ?
View 1 Replies
View Related
Sep 20, 2007
Hey guys,I'm pretty new to SQL configuration, and I need to give EXECUTEpersmissions for one of the SQL user roles. I am running SQL 2005Management Studio Express - free version. I found the list of mystored procedures, but I can not locate any permissions screen. Cansomeone help point me in the right direction? Thanks!
View 7 Replies
View Related
Jan 3, 2008
I'm running this legacy DTS package under SQL Server 2005, and need to make some changes.
I have some (say, 3) stored procedures, and they all have one same parameter. Each SP returns a dataset. I need to import each dataset to a table using DTS. Both the SPs and the destination tables are in the same database.
So, I created an "Execute SQL Task" and typed in "SQL Statement" something like this:
INSERT INTO TABLE TABLE1
EXEC SP1 ?
GO
INSERT INTO TABLE TABLE2
EXEC SP2 ?
GO
INSERT INTO TABLE TABLE3
EXEC SP3 ?
GO
And the execution returns an error: No value given for one or more required parameters.
Is it possible to assign a parameter to all three SPs? What is the work out if I don't want to change the SPs, and I don't want to create 3 Execute SQL Tasks?
View 4 Replies
View Related
Nov 6, 2007
I surfed a lot of the internet piecing this together. I have a database that gets copied every night from a live database so users can run queries against it, so I needed to be able to recreate a stored procedure from within ASP.NET. Also, I needed to take information I was importing from a .CSV file and compare it using the stored procedure to find specific information and import it into another database. I was able to do this using the SQLDMO reference object.
Here are some clipits of what you need.
Imports SQLDMOPrivate myServer As New SQLServer
Dim serverName As String = System.Configuration.ConfigurationManager.AppSettings("Server").ToString()Dim userName As String = System.Configuration.ConfigurationManager.AppSettings("UserName").ToString()
Dim password As String = System.Configuration.ConfigurationManager.AppSettings("Password").ToString()
Dim storedProcedure As New StoredProcedure
Dim qresults As SQLDMO.QueryResults
Example Stored Procedure
Try
myServer.Connect(serverName, userName, password)
storedProcedure.Text = "IF EXISTS (SELECT * FROM sysobjects WHERE name='memb_proc' AND user_name(uid)='dbo') DROP PROCEDURE dbo.memb_proc"myServer.Databases.Item("<databasename>", "dbo").StoredProcedures.Add(storedProcedure)
storedProcedure.Text = "CREATE PROCEDURE dbo.memb_proc @lastname varchar(50) = '', @firstname varchar(50) = '', @zip varchar(5) = '', @membrowno varchar(50) OUTPUT AS Select @membrowno = rowno from memb where lastname LIKE @lastname and name LIKE @firstname and zip1 LIKE @zip "myServer.Databases.Item("<databasename>", "dbo").StoredProcedures.Add(storedProcedure)
Label1.Text = "Creation of stored procedure successful"Catch ex As Exception
Label1.Text = "Creation of stored procedure failed"
Finally
myServer.DisConnect()End Try
Run Stored Procedure and Obtain Results
myServer.Connect(serverName, userName, password)
qresults = myServer.ExecuteWithResults("USE [databasename] DECLARE @return_value int,@membrowno varchar(50) EXEC @return_value = [dbo].[memb_proc] @lastname = N'" & Last & "', @firstname = N'" & First & "',@zip = N'" & ZIP & "', @membrowno = @membrowno OUTPUT SELECT @membrowno as N'@membrowno'")For num = 1 To qresults.Rows
MemberRowNo = qresults.GetColumnString(num, 1)
Next
myServer.DisConnect()
View 3 Replies
View Related
Jan 23, 2004
Hello,
Is it possible to execute DBCC statements remotely in destination servers through stored procedures existing in source server.
I dont want to use isql, osql, openquery, openresultset because I have to pass user id or password.
I have linked the required SQL servers using Linked servers.
If so please give some example.
Thanks in Advance,
Sateesh
View 9 Replies
View Related
May 6, 2014
We are using a third party tool that does not store passwords in an encrypted format therefore we created a user with minimal rights. Isn't there a way to grant "execute any stored procedure" to a user/Login? Do we really have to grant execute on each procedure to the user? And then do the same for each new store procedure? The only other option we have found to be able to "see" and execute the stored procedures is by granting "db_owner". I would think that would negate the user being minimal rights.
View 5 Replies
View Related
Mar 5, 2015
I have a column in a table, which have the stored procedure name stored in each row. Now, I need to execute each SP in the table dynamically. I'm trying to construct a SQL but not able to fire them!!
DECLARE @sql VARCHAR(MAX)
SELECT @sql = STUFF((SELECT '; GO EXEC ' + StoredProcedureName + '' FROM MyTable FOR XML PATH ('')),1,5,'')
print @sql
EXEC sp_executesql @sql
View 2 Replies
View Related
Sep 3, 2007
Hi,
I have a problem with sp execution.:
objects of [dbo]
Tables of [nuran]
Grants of [nuran]
[dbo].tabloA
[nuran].tmptabloA
Select,insert, update on [dbo].tabloA
[dbo].tmptabloA
Deny for [dbo].tmptabloA
[dbo].sp_yordam
Grant for executing [dbo].sp_yordam
(1)
create PROCEDURE [dbo].[SP_yordam]
AS
BEGIN
BEGIN TRANSACTION @Tran1
¦¦¦¦¦. ¦¦¦¦¦¦ ¦¦¦¦.
INSERT INTO [tabloA]
(, ,)
SELECT ,,
FROM [tmptabloA] WHERE ......
¦¦¦ ¦¦¦ ¦¦¦.
DELETE FROM [tmptabloA]
COMMIT TRANSACTION @Tran1
When user [nuran] execute the procedure sp_yordam by a VB program, the procedure use [dbo].tmptabloA not [nuran].[tmptaboA]. If there are data in the [dbo].tmptabloA, the procedure insert data to [dbo].tabloA from [dbo].tmptabloA. But when I checked user name in the procedure during execution, the user was [nuran].
If I write the procedure like that:
(2)
create PROCEDURE [dbo].[SP_tmpSil]
AS
declare @tablo1 as varchar(50),
DECLARE @sil as nvarchar(max)
select @tablo1='[tmptabloA]'
SELECT @sil = ' DELETE FROM ' + @tablo1 + ';'
EXEC (@sil)
END
And it executed by user [nuran],then it used the correct table [nuran].tmptabloA
Is there any way to use users table in an stored procedure without using the user name :
(3)
create PROCEDURE [dbo].[SP_yordam]
AS
BEGIN
BEGIN TRANSACTION @Tran1
¦¦¦¦¦. ¦¦¦¦¦¦ ¦¦¦¦.
INSERT INTO [tabloA]
(, ,)
SELECT ,,
FROM [nuran].[tmptabloA] WHERE ......
¦¦¦ ¦¦¦ ¦¦¦.
DELETE FROM [nuran].[tmptabloA]
COMMIT TRANSACTION @Tran1
I don't want to use (2) and (3) code methods, I prefer to use (1) script. Is there any compilation method, or any aditional way for using script (1) with correct user rights?
Thanks a lot
Nuran
View 4 Replies
View Related
Aug 15, 2006
hi everyone,
awhile back someone (i think it was darren) submitted a post which had a code example of using sql server agent stored procedures to execute a package. i searched for the post, but i didn't find it.
anyway, can someone please re-post that example or provide a similar one?
thanks.
View 7 Replies
View Related
Dec 17, 2007
Hi ALL,
I have a Execute SQL Task to execute a stored procedure. It has no input and output parameters.
The stored procedure is defined as follows:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
CREATE PROCEDURE [dbo].[SetSLATimePriority]
AS
BEGIN
DECLARE @PriorityID tinyint,@MAXPriorityID tinyint
DECLARE @Priority NVARCHAR(MAX), @SLATime int
SET @PriorityID=1
SET @MAXPriorityID=0
SELECT @MAXPriorityID=MAX([Priority ID]) FROM [MTD Dashboard].[dbo].[Priority]
SET NOCOUNT ON;
WHILE @PriorityID<=@MAXPriorityID
BEGIN
SELECT @Priority= [Priority] FROM [MTD Dashboard].[dbo].[Priority]
WHERE [Priority ID]=@PriorityID
SELECT @SLATime= [SLA Time in hours] FROM [MTD Dashboard].[dbo].[Priority]
WHERE [Priority ID]=@PriorityID
UPDATE [MTD Dashboard].[dbo].[Remedy Dump-Filtered]
SET [SLA Time] = @SLATime WHERE [Priority] like @Priority
SET @PriorityID=@PriorityID+1
END
END
The Properties of Execute SQL Task are set as follows:
Result Set: None
Connection Type: OLEDB
SQL Source Type: Direct Input
SQL Statement: EXEC ? = [dbo].[SetSLATimePriority]
IsQueryStoredProcedure: True
ByPassPrepare: False
Parameter Mapping:
Variable Name : User::IntValue
Direction: ReturnValue
Data Type: Long
ParameterName: 0
I am getting the following error, when I run this package.
[Execute SQL Task] Error: Executing the query "EXEC ? = [dbo].[SetSLATimePriority]" failed with the following error: "Invalid parameter number". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I am not able to figure out, where exactly the problem is.. Can some one please help me out?
View 3 Replies
View Related
Apr 29, 2004
Hi, all
I'm using Sql server 2000
I want to make select statement dynamically and return table using function.
in sp, I've done this but, in function I don't know how to do so.
(I have to create as function since our existing API..)
Following is my tials...
1.
alter Function fnTest
( @fromTime datetime, @toTime datetime)
RETURNS Table
AS
RETURN Exec spTest @from, @to
GO
Yes, it give syntax error..
2. So, I found the following
From Sql Server Books Online, Remark section of CREATE FUNCTION page of Transact-SQL Reference , it says following..
"The following statements are allowed in the body of a multi-statement function. Statements not in this list are not allowed in the body of a function: "
.....
* EXECUTE statements calling an extended stored procedures.
So, I tried.
alter Function fnTest
( @fromTime datetime, @toTime datetime)
RETURNS Table
AS
RETURN Exec master..xp_msver
GO
It doesn't work... syntax err...
Here I have quick question.. How to execute statements calling an extended stored procedures. any examples?
Now, I'm stuck.. how can I create dynamic select statement using function?
I want to know if it's possible or not..
View 13 Replies
View Related
Feb 19, 2015
I have a stored procedure. It can be executed like this
exec test @p = 1;
exec test @p = 2
exec test @p = n;
n can be hundred.
I want the sp being executed in parallel, not sequence. It means the 3 examples above can be run at the same time.
If I know the number in advance, say 3, I can create 3 different Execution SQL Tasks. They can be run in parallel.
However, the n is not static. It is coming from a table.Β
How can I execute Stored Procedures in PARALLEL and DYNAMICALLY ?
I think about using script task. In the script, I get the value of n, and the list of p, from the table, then running a loop with. In the loop, I create a threat and in the threat, I execute the sp like :Β exec test @p = p. So theΒ exec test may be run parallel. But I am not sure if it works.
View 4 Replies
View Related
Jul 20, 2015
Replication-Replication Distribution Subsystem: agent PRODDATA6 failed. Could not find stored procedure 'sp_MSdel_dboActiveTask_msrepl_ccs'.
Replication-Replication Transaction-Log Reader Subsystem: agent PRODDATA6. The process could not execute 'sp_replcmds' on 'PRODDATA6'.
Replication-Replication Distribution Subsystem: agent PRODDATA6. Could not find stored procedure 'sp_MSupd_dboActiveTask'.
Looks like these sp's got deleted?
View 1 Replies
View Related
Feb 4, 2006
Hi
I have new bought the SQL server 2005 enterprise, but it have 2 CDs, so what are the differences between CD1 and CD2? and so which one should i install first? or is it necessary to install both two or just need to install one of them?
And about my original sql 2000 database, can i just attach it's MDF file into the sql 2005 engine, or which import wizard can load the sql 2000 MDF into sql 2005? or do i need to keep the sql 2000 engine before do this?
thx
View 1 Replies
View Related
Apr 29, 2008
How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
View 1 Replies
View Related
May 13, 2008
Greetings:
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
Thanks!
View 5 Replies
View Related
Feb 13, 2008
Hi all,
I try to learn "How to Access Stored Procedures with ADO.NET 2.0 - VB 2005 Express: (1) Handling the Input and Output Parameters and (2) Reporting their Values in VB Forms". I found a good article "Calling Stored Procedures from ADO.NET" by John Paul Cook in http://www.dbzine.com/sql/sql-artices/cook6. I downloaded the source code into my VB 2005 Express:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form_Cook
Inherits System.Windows.Form.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeComponent()
'Add any initialization after the InitializeComponent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Dispose()
End If
End If
MyBase.Dispose(disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
Friend WithEvents GroupBox1 As System.Windows.Forms.GroupBox
Friend WithEvents labelPAF As System.Windows.Forms.Label
Friend WithEvents labelNbrPrices As System.Windows.Forms.Label
Friend WithEvents UpdatePrices As System.Windows.Forms.Button
Friend WithEvents textBoxPAF As System.Windows.Forms.TextBox
Friend WithEvents TenMostExpensive As System.Windows.Forms.Button
Friend WithEvents grdNorthwind As System.Windows.Forms.DataGrid
Friend WithEvents groupBox2 As System.Windows.Forms.GroupBox
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.GroupBox1 = New System.Windows.Forms.GroupBox()
Me.labelPAF = New System.Windows.Forms.Label()
Me.labelNbrPrices = New System.Windows.Forms.Label()
Me.textBoxPAF = New System.Windows.Forms.TextBox()
Me.UpdatePrices = New System.Windows.Forms.Button()
Me.groupBox2 = New System.Windows.Forms.GroupBox()
Me.TenMostExpensive = New System.Windows.Forms.Button()
Me.grdNorthwind = New System.Windows.Forms.DataGrid()
Me.GroupBox1.SuspendLayout()
Me.groupBox2.SuspendLayout()
CType(Me.grdNorthwind, System.ComponentModel.ISupportInitialize).BeginInit()
Me.SuspendLayout()
'
'GroupBox1
'
Me.GroupBox1.Controls.AddRange(New System.Windows.Forms.Control() {Me.labelPAF, Me.labelNbrPrices, Me.textBoxPAF, Me.UpdatePrices})
Me.GroupBox1.Location = New System.Drawing.Point(8, 8)
Me.GroupBox1.Name = "GroupBox1"
Me.GroupBox1.Size = New System.Drawing.Size(240, 112)
Me.GroupBox1.TabIndex = 9
Me.GroupBox1.TabStop = False
'
'labelPAF
'
Me.labelPAF.Location = New System.Drawing.Point(8, 16)
Me.labelPAF.Name = "labelPAF"
Me.labelPAF.Size = New System.Drawing.Size(112, 32)
Me.labelPAF.TabIndex = 2
Me.labelPAF.Text = "Enter Price Adjustment Factor"
'
'labelNbrPrices
'
Me.labelNbrPrices.Location = New System.Drawing.Point(8, 80)
Me.labelNbrPrices.Name = "labelNbrPrices"
Me.labelNbrPrices.Size = New System.Drawing.Size(216, 16)
Me.labelNbrPrices.TabIndex = 5
'
'textBoxPAF
'
Me.textBoxPAF.Location = New System.Drawing.Point(120, 16)
Me.textBoxPAF.Name = "textBoxPAF"
Me.textBoxPAF.TabIndex = 0
Me.textBoxPAF.Text = ""
'
'UpdatePrices
'
Me.UpdatePrices.Location = New System.Drawing.Point(8, 48)
Me.UpdatePrices.Name = "UpdatePrices"
Me.UpdatePrices.Size = New System.Drawing.Size(88, 23)
Me.UpdatePrices.TabIndex = 6
Me.UpdatePrices.Text = "Update Prices"
'
'groupBox2
'
Me.groupBox2.Controls.AddRange(New System.Windows.Forms.Control() {Me.TenMostExpensive, Me.grdNorthwind})
<Part 1----To be continued due to the length of this post>
View 1 Replies
View Related
Jan 14, 2008
Hi all,
I put "Northwind" Database in the Database Explorer of my VB 2005 Express and I have created the following stored procedure in the Database Exploror:
--User-defined stored procedure 'InsertCustomer'--
ALTER PROCEDURE dbo.InsertCustomer
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24)
)
AS
INSERT INTO Customers
(
CustomerID,
CompanyName,
ContactName,
ContactTitle,
Address,
City,
Region,
PostalCode,
Country,
Phone,
Fax
)
VALUES
(
@CustomerID,
@CompanyName,
@ContactName,
@ContactTitle,
@Address,
@City,
@Region,
@PostalCode,
@Country,
@Phone,
@Fax
)
=================================================
In my VB 2005 Express, I created a project "KimmelCallNWspWithAdoNet" that had the following code:
--Form_Kimmel.vb--
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form_Kimmel
Public Sub InsertCustomer()
Dim connectionString As String = "Integrated Security-SSPI;Persist Security Info=False;" + _
"Initial Catalog=northwind;Data Source=NAB-WK-EN12345"
Dim connection As SqlConnection = New SqlConnection(connectionString)
connection.Open()
Try
Dim command As SqlCommand = New SqlCommand("InsertCustomer", connection)
command.CommandType = CommandType.StoredProcedure
command.Parameters.Add("@CustomerID", "PAULK")
command.Parameters.Add("@CompanyName", "Pauly's Bar")
command.Parameters.Add("@ContactName", "Paul Kimmel")
command.Parameters.Add("@ContactTitle", "The Fat Man")
command.Parameters.Add("@Address", "31025 La Jolla")
command.Parameters.Add("@City", "Inglewoog")
command.Parameters.Add("@Region", "CA")
command.Parameters.Add("@Counrty", "USA")
command.Parameters.Add("@PostalCode", "90425")
command.Parameters.Add("@Phone", "(415) 555-1234")
command.Parameters.Add("@Fax", "(415 555-1235")
Console.WriteLine("Row inserted: " + _
command.ExecuteNonQuery().ToString)
Catch ex As Exception
Console.WriteLine(ex.Message)
Throw
Finally
connection.Close()
End Try
End Sub
End Class
==============================================
I executed the Form_Kimmel.vb and I got no errors. But I did not get the new values insterted in the table "Custermers" of Northwind database. Please help and tell me what I did wrong and how to correct this problem.
Thanks in advance,
Scott Chang
View 10 Replies
View Related
Dec 15, 2005
hi
i try to restore a bak file from another sql2005 server to my sql2005 server, but it show the error message as below :
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Cannot open backup device 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupackup.bak'. Operating system error 5(error not found).
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3201)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3201&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
pls some one can help me ???
thanks
chaus
View 62 Replies
View Related
Jan 31, 2008
Hi I have an application that I have started to develop. I have successfully set the connection to open the SQL Server database that I created. When I first started on the program, I was able to create Table Adapters by dragging the tables or stored procedures onto the DataSet work surface and going through the configuration process. At one point, however, I stopped being able to see any of my stored procedures in the database view although they are there because when I go to create a new table adapter, I am able to right click and add the new adapter and find the stored procedure in the wizard.Is there any way I can reset this so that my stored procedures are visible again. I have tried refreshing to no avail - and I think this is creating problems in other parts of the application.Any help appreciate.Roger
View 1 Replies
View Related
Apr 24, 2007
Hello everyone,I face currently a problem where I could need some input for searchingthe source of the ProblemSystem: SQL Server 9.0I fill from Database A with triggers Database B, everything worksfine.On Database B there is a Stored Procedures that checks the records andadd additional information accordingly, this Stored Procedures isnormally called by the application on "update and insert" in theaccording table.When I try to call this Stored Procedures from the Database A, thetrigger does not work anymore, even if I do a try catch over the wholetrigger, he never reach the Catch and the insert I try to do there toget the error message.On both Databases the user, that is taken to execute the trigger isexistent and DB-Owner of both Databases.If I go and execute the Stored Procedures manually after an insert orupdate to Database B everything works fine.I also already tried to check on Database B if there is an insert orupdate from Database A and if, to execute the Stored Procedures, withthe same result, nothing and all happens anymore, neither update onDatabase A and also not on Database B.And also I cant catch the error as the Try/Catch is not working.Hope I could explain it understandable and maybe someone remembersalready having the same problem.Thanks & Best regardsPascal
View 2 Replies
View Related
Apr 14, 2008
I've never dealt with stored procedures much.. but i have a new database
created.. imported the tables, but the stored procedures didnt get copied
over..
Is there an easy way to export them.. perhaps to a .sql file ... then import
them or run a script on the other database..
I have never done much with the query window before, so i'm not sure how to
handle this.. as there are around 20 stored procedures that need imported..
Thanks for any tips...
View 5 Replies
View Related
