SQL2005 Cluster Setup Failed Due To Task Scheduler And Native Client
Nov 28, 2006
Hi all,
I am trying to setup the cluster SQL server, say ServerA and ServerB. While I start the setup in ServerA, it prompts,
'Setup failed to start on the remote machine. Check the Task scheduler event
log on the remote machine.'
But I found that there is no remote logon to both nodes and the service task scheduler is running in both node.
On the other hand, I try to install the SQL via ServerB, it prompts for valid Native client package 'sqlncli.msi' and caused the setup failed finally. However, the Native client was setup successfully as a prerequisite once starting the setup.
Any advise? Thanks in advance!!
View 5 Replies
ADVERTISEMENT
Jul 5, 2007
When I install the sp2 in a cluster,the database engine upgrade failed.I found the error log for the install at C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixHotFix.log.
Here's the part that mattered:
07/05/2007 15:34:18.319 Patching available passive node: NODEA
07/05/2007 15:34:18.319 Patching passive node: NODEA
07/05/2007 15:34:18.335 Waiting for first completed passive node
07/05/2007 15:34:18.491 Task Scheduler: Created remote folder for product instance target \NODEA
07/05/2007 15:35:00.194 Task Scheduler: Transferred payload to remote product instance target \NODEA
07/05/2007 15:35:00.194 Task Scheduler: Transferred payload to remote product instance target \NODEA
07/05/2007 15:35:00.241 Task Scheduler: Created new scheduled task for product instance target \NODEA
07/05/2007 15:35:00.663 Task Scheduler: Saved new scheduled task for product instance target \NODEA
07/05/2007 15:35:00.663 Task Scheduler: Created scheduled task for product instance target \NODEA
07/05/2007 15:35:00.663 Task Scheduler: Started scheduled task for product instance target \NODEA
07/05/2007 15:35:00.663 Task Scheduler: Started scheduled task for product instance target \NODEA
07/05/2007 15:40:06.817 Task Scheduler: Scheduled task for product instance target has completed
07/05/2007 15:40:06.817 Task Scheduler: Waiting for exit code from scheduled task for product instance target \NODEA
07/05/2007 15:40:11.817 Task Scheduler: Received exit code 29512 from scheduled task for product instance target \NODEA
07/05/2007 15:40:11.817 Task Scheduler: Result code for scheduled task for product instance target has been received
07/05/2007 15:40:11.817 Task Scheduler: Removed scheduled task for product instance target \NODEA
07/05/2007 15:40:12.333 Task Scheduler: Removed remote folder for product instance target \NODEA
07/05/2007 15:40:12.333 Remote process completed for product instance target
07/05/2007 15:40:12.333 Exit code for passive node: NODEA = 29512
07/05/2007 15:40:13.333 The following exception occurred: No passive nodes were successfully patched Date: 07/05/2007 15:40:13.333 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllinstance.cpp Line: 3422
07/05/2007 15:40:13.676 Watson: Param1 = Unknown
07/05/2007 15:40:13.676 Watson: Param2 = 0x2b01
07/05/2007 15:40:13.676 Watson: Param3 = Unknown
07/05/2007 15:40:13.676 Watson: Param4 = 0x0
07/05/2007 15:40:13.676 Watson: Param5 = instance.cpp@3422
07/05/2007 15:40:13.676 Watson: Param6 = Unknown
07/05/2007 15:40:13.676 Watson: Param7 = SQL9
07/05/2007 15:40:13.676 Watson: Param8 = Hotfix@
07/05/2007 15:40:13.676 Watson: Param9 = x86
07/05/2007 15:40:13.676 Watson: Param10 = 3042
07/05/2007 15:40:13.676 Installed product: SQL9
07/05/2007 15:40:13.708 Hotfix package completed
07/05/2007 15:40:13.708 Attempting to continue the 32 bit ngen queue
Any advise?Thanks in advance.
View 3 Replies
View Related
Nov 1, 2006
Hi,
I have SQL2000 installed as the default instance, and now I'm trying to install SQL 2005 standard edition as a named instance.
I receive this error :
SQL Server could not connect to database service for server configuration.. [SQL Native client] Encryption not supported on the client. However I'm able to install client tools
The setup works fine on other box with the same config : SQL 2000/Windows XP, is there any work around for this issue ?
In my SQL 2000 client network utilty "Force proctocol encryption " is desabled and did not find the setting for SQL 2005 !
Thank you
View 1 Replies
View Related
Nov 13, 2006
Hi
I have seen in the licence of SNAC that it is a redistribuable piece of software. That's fine to me
However, when we install the MSI file, it places dll files into <windir>system32. Our policy, when possible, is to install everything we need into the install dir of our software (to work with validated sub-systems).
Is it possible to parametrize the installation of SNAC for the place where files are written, or to install the files ourselves as part of our distribution ?
Regards
--
C. Doré
View 4 Replies
View Related
Feb 8, 2008
All,
I was trying to install SQL Server 2005 on Windows 2003 Server and it failed on installing one of the components "SQL native Client",
the Error message is
The Installation Package of the Product Microsoft SQL Server Native Client cana not be found. Try the Installation again using the Valid copy of the installtion package "sqlncli.msi"
Thx
View 2 Replies
View Related
Oct 10, 2015
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
View 3 Replies
View Related
Mar 18, 2008
On computer 1, I am programming a C# utility to connect to a SQL 2005 SP2 Database. Here is the connection string.
Server=serverName;Database=database;User Id=DOMAIN/DomainAccount;Password=password;
I am using Visual Studio 2005 with .NET 2.0.
I have logged into Computer 1 with a different account. When I run the utility, I get a login failed exception. Here is the error I get from SQL 2005.
Login failed for user 'DOMAIN/DomainAccount'. [CLIENT: xxx.xxx.xxx.xxx].
Error: 18456, Severity: 14, State: 6.
xxx are filled with the valid IP address of the computer I am running the utility from.
When I log into the computer 2 with the same domain account, it runs with success.
Login succeeded for user 'DOMAIN/DomainAccount'. Connection: trusted. [CLIENT: xxx.xxx.xxx.xxx]
When I put Trusted_Connection=True; in the connection string, it connects as me and not the domain user I want to connect to.
When I put Integrated Security=SSPI; in the connection string, it does the same thing.
View 1 Replies
View Related
Dec 18, 2007
I have .NET Framework 2.0 and Visual studio 2005 installed on my machine. I also have SQL Server 2000 Developer Edition installed with Service Pack 4.
When I try to install SQL Server 2005 express, I get an error when the setup tries to install SQL Native Client. I have read many forums, but couldnt find a resolution. I can not see SQL Native Client in my Add Remove Programs either.
I tried to unzip the SQLEXPR.exe into a temp folder and when I right click sqlncli.msi and say Repair or Uninstall. It says "This action is valid for products that are currently installed."
When i try to run the sqlncli.msi file ..i get an error message saying "Installation of Microsoft SQL Server Native Client failed because a higher version already exisits on the machine. To proceed uninstall the higher version and then run Microsoft SQL Server Native Client Setup"
Please help as I am unable to install SQL Server 2005 Express....
SQL Server Native Client -- Set up failed
SQL VSS Writer -- Set up failed
Database Services -- Set up failed
Thank you in advance
Log mesg -==
Verbose logging started: 12/17/2007 23:18:36 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (74:B4) [23:18:36:828]: Resetting cached policy values
MSI (c) (74:B4) [23:18:36:828]: Machine policy value 'Debug' is 0
MSI (c) (74:B4) [23:18:36:828]: ******* RunEngine:
******* Product: {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}
******* Action:
******* CommandLine: **********
MSI (c) (74:B4) [23:18:36:828]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (74:B4) [23:18:36:828]: Grabbed execution mutex.
MSI (c) (74:B4) [23:18:36:828]: Cloaking enabled.
MSI (c) (74:B4) [23:18:36:828]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (74:B4) [23:18:36:828]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (100) [23:18:36:828]: Grabbed execution mutex.
MSI (s) (10:E0) [23:18:36:843]: Resetting cached policy values
MSI (s) (10:E0) [23:18:36:843]: Machine policy value 'Debug' is 0
MSI (s) (10:E0) [23:18:36:843]: ******* RunEngine:
******* Product: {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}
******* Action:
******* CommandLine: **********
MSI (s) (10:E0) [23:18:36:843]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (10:E0) [23:18:36:843]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (10:E0) [23:18:36:843]: User policy value 'DisableMedia' is 0
MSI (s) (10:E0) [23:18:36:843]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Looking for sourcelist for product {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Adding {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Now checking product {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Media is enabled for product.
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Processing net source list.
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Processing media source list.
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Trying media source G:.
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 2203 2: G:sqlncli.msi 3: -2147287038
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Processing URL source list.
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1402 2: UNKNOWNURL 3: 2
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1706 2: 3: sqlncli.msi
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Failed to resolve source
MSI (s) (10:E0) [23:18:36:843]: MainEngineThread is returning 1612
MSI (c) (74:B4) [23:18:36:859]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (74:B4) [23:18:36:859]: MainEngineThread is returning 1612
=== Verbose logging stopped: 12/17/2007 23:18:36 ===
View 5 Replies
View Related
Apr 10, 2007
Hi
i connect to remote Integration Service. i configure server for remote connection( on component services and DCOM config , ... ) .and now i can connect to Integration Service remotely and correctly.
but when i expand Stored Package and then click to expand MSDB this error will hapen:
login failed for user ... .(microsoft sql native client )
please help me
thanks in advance
View 1 Replies
View Related
Mar 10, 2004
I appologize if I am posting this msg twice (newby), but I am getting this error msg in the app log.
MS DTC setup failed to populate the shared cluster
registry. The DTC resource will not be able to come
online.Error Specifics:
d:srv03rtmcomcomplusdtcsharedmtxclumtxcluse
tuphelper
.cpp:120, CmdLine: "C:WINDOWScluster
esrcmon.exe" -e
1208 -m 1212 -p 2132, Pid: 3636
Have anybody seen this msg and any ideas on what to do in this situation? Your timely assistance is much appreciated. Thanks,
View 5 Replies
View Related
Oct 8, 2010
when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
View 12 Replies
View Related
May 3, 2007
On a multi node Win2003 x64 R2.
When preforming install for 2nd SQL instance. Setup fails with log entries
Task did not appear to start on machine NODE2 : 267013
Task did not appear to start on machine NODE3 : 267013
Note: first install worked fine - after getting over MSDTC issues...
Also have confirm task scheduler service is running on all nodes.
Anyone with some insights?
Regards
View 3 Replies
View Related
Feb 27, 2013
I installed a SQL server 2008 R2 on a 64 bit Stand alone system today morning
Now I am trying to apply SP1 on it. But it is not progressing further with the below. How to overcome this issue.
Note: Cluster services not installed on this server. Cluster service is not there in the services.msc as well.
View 10 Replies
View Related
May 10, 2006
Product: Microsoft SQL Server 2005 -- Error 29515. SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]Encryption not supported on the client. Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
View 78 Replies
View Related
May 2, 2006
On Windows XP systems I get the following issue when trying to browse the MSDB folder in SSIS
Client unable to establish connection
Encryption not supported on SQL Server. (Microsoft SQL Native Client)
I have noticed another post where several others have noticed the same issue. It appears to only occur on Windows XP installations. Is there a workaround or fix for this?
View 2 Replies
View Related
Mar 3, 2007
Hi,
While using Sql Native Client ,VB Application giving error
"Transcation Cannot Start because more than one ODBC connection is in use"
But when useing SqlServer client then work perfectly ok.
Please guide where to use Sql Native Client.
Thanks
Rizwan
View 1 Replies
View Related
Apr 23, 2008
I have tried this on several different operating systems (VISTA and XP ) and several versions of SQL NATIVE CLIENT including 2005.90.3042.0
I have a 64 bit "SQL NATIVE CLIENT" connection that fails. The exact same connection and code succeeds on 32 bit.
My customer and I prepend "oledb:" to the connection string and it starts working.
FAILS on 64 bit:
Provider=SQLNCLI.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=Wrigley_Test;Data Source=MONGO;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RIPTIDE;Use Encryption for Data=False;Tag with column collation when possible=False;MARS Connection=False;DataTypeCompatibility=0;Trust Server Certificate=False
WORKS
oledb:Provider=SQLNCLI.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=Wrigley_Test;Data Source=MONGO;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RIPTIDE;Use Encryption for Data=False;Tag with column collation when possible=False;MARS Connection=False;DataTypeCompatibility=0;Trust Server Certificate=False
I debugged my code to the point that I know it is happening when I call CreateAccessor for my SQL statement.
m_hr=m_pIAccessor->CreateAccessor(DBACCESSOR_ROWDATA, GetCols(), (m_pDBBinds+IsBookmarked()), 0, &m_hAccessor, NULL);
Error:
Microsoft SQL Native Client: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
Does anyone have any suggestions?
View 6 Replies
View Related
Jul 6, 2015
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies
View Related
Feb 20, 2007
Hello.
Does anybody knowk if it's necessary to upgrade Sql Native Client to conect to a Server when you has upgrade it to Sql 2005 SP2? That is to say, can you conect to a Sql server 2005 SP1 and to a Sql Server 2005 SP2 from a client with the same Sql Native client or you have also to upgrade it?
Thanks.
View 7 Replies
View Related
May 14, 2007
We have a VB6 app that we're trying to connect to an SQL2005 server.
We're able to connect from dev machines that have SQLExpress, or SQL 2005 tools installed, but we cannot connect from other machines. We've installed sqlncli.msi from the MS site, but this still doesn't work. When we try to login, we get an error that reads "0[Microsoft][SQL Native Client]Fractional truncation" when we try writing to a smalldatetime field. This problem does not happen on the dev machines.
Connection string:
connectiontype = cnnSQLServer
database name = name
pasword = password
userid = uid
servername = servername
driver = {SQL Native Client}
Driver version on the dev machines is: 2005.90.3042.00
Driver version on the roll out machines is: 2005.90.1399.00
What are we doing wrong?
Zeke.
View 1 Replies
View Related
Mar 3, 2007
Hi,
I'm developing an Ads system, which will have an scheduler functionality. Here's how it works: each hour a process will verify and publish an XML file with Ads that have to be shown at that hour. To display the Ad, the "NextDisplay" table's field has to be equal to currently date/HOUR. Then the process will update the "LastDisplay" field with the currently time and call a MsSQL stored procedure that will recalculate the NextDisplay time of the Ad.
My problem is doing this stored procedure. I've based my tables to allow the same schedule rules of the Windows Task Scheduler, so I have to verify each rule to calculate the next display time, but it's a difficult process, 'cause there are a lot of details to be considered.
I thought interoping with Windows Task Scheduler or seeing some code that do something like that, to have some ideas about how to implement it.
Suggestions?
Thx!
View 1 Replies
View Related
Aug 16, 2007
We're upgrading from SQL2K to 05 next week. We want to push the SQL Native Client driver(ODBC) thru the network but IT said it can only be an msi or exe file. Is their anyway we could get this file in this format?
View 4 Replies
View Related
Sep 5, 2007
I'm new in this forum and I 'm Italian, so my English won't be perfect!
If i want to connect to my SQL Server database in prompt i type:
"osql -U sa" and then i type the password.
So, I get an error that says:
"[Sql Native Client] Provider Via: Impossible to find the specified module.
[Sql Native Client] Access timeout expired
[Sql Native Client] An error occured during the attempt to estabilish a connection to the server. During the connection to SQL Server this error may be caused by pre-defined settings that don't ......"
How i can solve this problem?
Who can help me?
Thank you!!
Maxx
View 3 Replies
View Related
Mar 11, 2007
Hello,
Can I use the "SQLOLEDB" provider to connect to a SQL Native Client? Follow-up question: does the "SQLOLEDB" provider use the same TDS transport protocol as the SQL Native Client provider?
Thanks as always!
dotBomb
View 6 Replies
View Related
Apr 23, 2008
The Clients Environment:
Windows Server 2003 R2
SQL Server 2005 SP1 Standard Edition Version 9.00.2153.00
SQL Native Client Version 2005.90.2047.0
My Development Environment
Windows XP
SQL Server 2005 SP1 Developer Edition Version 9.00.2047.0
SQL Native Client Version 2005.90.3042.0
The Error: [Microsoft] [ODBC SQL Server Driver] Fractional truncation
We have tons of VB 6 legacy code. (I know.. we are trying to get it to .Net.. just not enough time in the day) We recently installed our application at a cleints site (environment listed above) and all of a sudden we are getting errors every time we execute a rs.update using ADODB. I have pasted an example below. The kicker is that it runs fine in my development environment. I can get around this issue by using a command object to do the insert, but we have thousands of these sprinkled throughout the application and would take weeks to change them over; and of course this client demands to start using our application NOW. I am inclined to think that it is an issue with SQL Client since it does not appear to have been updated when the SP1 was installed. I have read some blogs about issues with SQL Native Client and datetime values.
'Broke Code
Dim RS as New ADODB.Recordet
Dim SQL as String
Dim datGetDate as Date
'THis select statement return an empty recordset. ID is an identity column
SQL = "SELECT * FROM table WHERE id is null
RS.Open SQL, gadoConn,adOpenKeySet, adLockOptimistic
RS.AddNew
RS("col1")=Value1
RS("col2")=Value2
RS("starttime")=datGetDate
RS.Update 'This is where it blows
RS.Close
'New and Improved code. Works perfectly
Dim SQL as String
Dim objCMD as new ADODB.Command
SQL = "INSERT INTO table(col1,col2,starttime) values('" & Value1 & "','" & Value2 & "','" & datGetDate & "')"
With objCMD
.ActiveConnection=gadoConn
.CommandText=SQL
.CommandType=adCmdText
.execute
End with
Thanks!
View 8 Replies
View Related
Oct 15, 2007
I have created a table using SQL SERVER 2005 with column datatype as varbinary and with column size as 'MAX':-
i.e:
create table tablename {
column varbinary (MAX)
}
When i try to query for Column precision using SQL Native Client ODBC Driver it returns '0' instead of 2^31-1 (which is the value for MAX), but when i use other driver it works as expected. If i assign some value like varbinary(20) then it works.
Please let me know is there any fix pack available for this. Because one of our client is facing this problem, so we have to provide solution as early as possible:
Version of SQL Native Driver : 2005.90.1399.00
Any help would be appreciated.
View 4 Replies
View Related
Sep 5, 2007
I'm new in this forum and I 'm Italian, so my English won't be perfect!
If i want to connect to my SQL Server database in prompt i type:
"osql -U sa" and then i type the password.
So, I get an error that says:
"[Sql Native Client] Provider Via: Impossible to find the specified module.
[Sql Native Client] Access timeout expired
[Sql Native Client] An error occured during the attempt to estabilish a connection to the server. During the connection to SQL Server this error may be caused by pre-defined settings that don't ......"
How i can solve this problem?
Who can help me?
Thank you!!
Maxx
View 1 Replies
View Related
Sep 9, 2007
Hi
How can I check "Native client" is present on my client? I'm trying to eliminate all the reasons my client won't run a VC++ app which access a sql server.
thanks
Z
View 4 Replies
View Related
Aug 9, 2006
Hi,
I'm looking to run a "job" on a SQL database regularly (like scheduled by a "task scheduler") to updated my database.
It appears I can use SQL Service broker to run such a job.
Can I embed a "task scheduler" inside my SQL Server database to trigger this job each X seconds?
View 4 Replies
View Related
Jun 4, 2008
and TCP as a connection method.
When using Named Pipes the issue is no longer there.
On massive batch inserts we sometimes get a long pause at the end of one insert and before begining the next one. Example:
1000 inserts in the same table and then repeat. This will work fine for 3 or 4 iterations, then pause during the 5th iteration for up to 40 seconds and then simply continue.
When this exact same procedure is done using Named Pipes as the connection method this never happens.
While this is happening neither the server or the workstation is doing anything, 0% CPU, 0% network, it just sits there.
All this using the SQL Native Client 2005 and ADO.
Anyone have any ideas?
View 8 Replies
View Related
Feb 4, 2008
I cannot connect to my SQL2005 server using the old SQL ODBC drivers, I have to use the Native client drivers. The database I am trying to connect to is a SQL 2000 db I just attached. Its owner is a SQL user login, which works fine and can connect remotely.
Thoughts?
Possibly related: http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=96732
View 1 Replies
View Related
Aug 26, 2007
I installed sql2005 on server, created odbc connection , sucess connection.
I installed native client on pc. pc ping server sucessfully. I created odbc using sa with valid password (as i do in server), when completing give error " sql server does not exist or access denied" , and can not connect with server.
how can i resolve the problem.
View 1 Replies
View Related
Jul 25, 2007
Hi,
I have a VB6 front end connecting to SQL Server 2005 using the SQL Native Client.
When I execute a stored procedure the returned recordset contains more fields then it should. These extra fields seem to be the fields that the tables are joined on.
This happens with every stored procedure(simple to complex).
If I change the ODBC to use the standard SQL Server driver it works fine.
Any ideas on why this is happening?
View 9 Replies
View Related
