SQL2005 Sp2 Upgrade Failed Due To Task Scheduler

Jul 5, 2007

When I install the sp2 in a cluster,the database engine upgrade failed.I found the error log for the install at C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixHotFix.log.
Here's the part that mattered:



07/05/2007 15:34:18.319 Patching available passive node: NODEA
07/05/2007 15:34:18.319 Patching passive node: NODEA
07/05/2007 15:34:18.335 Waiting for first completed passive node
07/05/2007 15:34:18.491 Task Scheduler: Created remote folder for product instance target \NODEA
07/05/2007 15:35:00.194 Task Scheduler: Transferred payload to remote product instance target \NODEA
07/05/2007 15:35:00.194 Task Scheduler: Transferred payload to remote product instance target \NODEA
07/05/2007 15:35:00.241 Task Scheduler: Created new scheduled task for product instance target \NODEA
07/05/2007 15:35:00.663 Task Scheduler: Saved new scheduled task for product instance target \NODEA
07/05/2007 15:35:00.663 Task Scheduler: Created scheduled task for product instance target \NODEA
07/05/2007 15:35:00.663 Task Scheduler: Started scheduled task for product instance target \NODEA
07/05/2007 15:35:00.663 Task Scheduler: Started scheduled task for product instance target \NODEA
07/05/2007 15:40:06.817 Task Scheduler: Scheduled task for product instance target has completed
07/05/2007 15:40:06.817 Task Scheduler: Waiting for exit code from scheduled task for product instance target \NODEA
07/05/2007 15:40:11.817 Task Scheduler: Received exit code 29512 from scheduled task for product instance target \NODEA
07/05/2007 15:40:11.817 Task Scheduler: Result code for scheduled task for product instance target has been received
07/05/2007 15:40:11.817 Task Scheduler: Removed scheduled task for product instance target \NODEA
07/05/2007 15:40:12.333 Task Scheduler: Removed remote folder for product instance target \NODEA
07/05/2007 15:40:12.333 Remote process completed for product instance target
07/05/2007 15:40:12.333 Exit code for passive node: NODEA = 29512
07/05/2007 15:40:13.333 The following exception occurred: No passive nodes were successfully patched Date: 07/05/2007 15:40:13.333 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllinstance.cpp Line: 3422
07/05/2007 15:40:13.676 Watson: Param1 = Unknown
07/05/2007 15:40:13.676 Watson: Param2 = 0x2b01
07/05/2007 15:40:13.676 Watson: Param3 = Unknown
07/05/2007 15:40:13.676 Watson: Param4 = 0x0
07/05/2007 15:40:13.676 Watson: Param5 = instance.cpp@3422
07/05/2007 15:40:13.676 Watson: Param6 = Unknown
07/05/2007 15:40:13.676 Watson: Param7 = SQL9
07/05/2007 15:40:13.676 Watson: Param8 = Hotfix@
07/05/2007 15:40:13.676 Watson: Param9 = x86
07/05/2007 15:40:13.676 Watson: Param10 = 3042
07/05/2007 15:40:13.676 Installed product: SQL9
07/05/2007 15:40:13.708 Hotfix package completed
07/05/2007 15:40:13.708 Attempting to continue the 32 bit ngen queue



Any advise?Thanks in advance.




View 3 Replies


ADVERTISEMENT

SQL2005 Cluster Setup Failed Due To Task Scheduler And Native Client

Nov 28, 2006

Hi all,
I am trying to setup the cluster SQL server, say ServerA and ServerB. While I start the setup in ServerA, it prompts,
'Setup failed to start on the remote machine. Check the Task scheduler event
log on the remote machine.'

But I found that there is no remote logon to both nodes and the service task scheduler is running in both node.

On the other hand, I try to install the SQL via ServerB, it prompts for valid Native client package 'sqlncli.msi' and caused the setup failed finally. However, the Native client was setup successfully as a prerequisite once starting the setup.

Any advise? Thanks in advance!!

View 5 Replies View Related

SQL2005 SP1 Upgrade Failed : The Specified Driver Is Invalid

Jan 9, 2007

We are getting a failure when upgrading to SP1 for SQL2005.  We're running Windows 2003 Enterprise Edition SP1.  We're running 4 SQL 2005 instances and 6 SQL 2000 instances on this machine.  One of the four 2005 instances did upgrade successfully - don't know how or why.

Looking at other postings, it seems that the 10 lines or so preceding "value 3" in the upgrade log file (under C:WINDOWSHotfixSQL9Logs) are helpful in diagnosing the problem.

Here are the lines preceding the value 3:

<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2

PerfTime Start: Do_sqlPerfmon2 : Mon Jan 08 13:38:23 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2001' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Mon Jan 08 13:38:23 2007

 Gathering darwin properties for failure handling.
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.

MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.

MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.

MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.

MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.

MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
Error Code: 2001
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.

MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.

MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.

MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.

MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.

MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The specified driver is invalid.

<Failure Type='Fatal' Error='2001'>
<EndFunc Name='LaunchFunction' Return='2001' GetLastError='0'>
MSI (s) (50:F0) [13:38:25:251]: User policy value 'DisableRollback' is 0
MSI (s) (50:F0) [13:38:25:251]: Machine policy value 'DisableRollback' is 0
Action ended 13:38:25: InstallFinalize. Return value 3.

Thanks,

Bruce


 

View 1 Replies View Related

Windows Task Scheduler...

Mar 3, 2007

Hi,
 I'm developing an Ads system, which will have an scheduler functionality. Here's how it works: each hour a process will verify and publish an XML file with Ads that have to be shown at that hour. To display the Ad, the "NextDisplay" table's field has to be equal to currently date/HOUR. Then the process will update the "LastDisplay" field with the currently time and call a MsSQL stored procedure that will recalculate the NextDisplay time of the Ad.
My problem is doing this stored procedure. I've based my tables to allow the same schedule rules of the Windows Task Scheduler, so I have to verify each rule to calculate the next display time, but it's a difficult process, 'cause there are a lot of details to be considered.
I thought interoping with Windows Task Scheduler or seeing some code that do something like that, to have some ideas about how to implement it.
Suggestions?
Thx!

View 1 Replies View Related

SQL Service Broker : Task Scheduler

Aug 9, 2006

Hi,

I'm looking to run a "job" on a SQL database regularly (like scheduled by a "task scheduler") to updated my database.

It appears I can use SQL Service broker to run such a job.

Can I embed a "task scheduler" inside my SQL Server database to trigger this job each X seconds?

View 4 Replies View Related

Clear History Automatically From Task-Scheduler

Jan 24, 2001

I use the Task-Scheduler from SQL-SERVER 6.5 to backup and maintain databases. Have you any idea how I can clear the history automatically. I want to clear the history-logs older then 30 days and for 25 SQL-Server is it very costly to delete the history manually. Thanks.

View 1 Replies View Related

Executing Backup Script With Task Scheduler

Dec 20, 2007

Hello,

I had configured a backup operation with SQL Server Express 2005 and saved the operation as a .sql file. I then configured a task with Task Scheduler to execute this .sql file at a specified time. The text in the Run box for this task is:

"C:Program FilesMicrosoft SQL Server90ToolsBinnSQLCMD.EXE" -S .SQLEXPRESS -i"C:Program FilesMicrosoft SQL ServerFull_M-Th.sql"

I verified this .sql file would run a backup by launching Management Studio Express, opening the file, and then clicking the Execute button. Minutes later, I had a backup. Yet the scheduled task did not run, nor would it run when I manually chose to run it from the list of scheduled tasks. I looked in the Event Viewer, but could not find anything that tipped me off to what I am not doing correctly. If anyone can tell me what might be wrong with the command I pasted above, it would be appreciated.

Thanks for reading!

View 4 Replies View Related

Transact SQL :: How To Run Query In BAT File In Task Scheduler At Every 10 Seconds

Mar 4, 2015

This is my sql script :

DECLARE @countRows INT,
@currDate DATE,
@checkForTasks INT,
@created_by_id INT,
@gst_ID int;
SET @currDate = Getdate()

This is resided in videos folder of windows , i have created a task schedular in windows 8.1 to run daily at every 10 seconds , but it is not working ...

This sql query is running perfectly in sql server. Query have no errors.

View 9 Replies View Related

Integration Services :: Running SSIS Job Using Windows Task Scheduler

Jul 16, 2015

I am new to the world of ETL. I recently started using SSIS and I have come across couple of questions on this.

1.Can we run a SSIS Package using windows task scheduler?

2. If the above answer is yes,I don't have the SSMS installed on my machine. Can a SSIS package run in the absence of SSMS?(I do have Visual studio and SQL server data tools installed)

3. Can a SSIS Package run in the absence of Visual studio and SQL Server Data Tools.Say for example, I create a SSIS package and then remove Visual studio and SQL server data tools from my machine. Will the Task scheduler still be able to run the SSIS package?

4. Does the SSMS free edition comes along with SQL server Agent?

View 5 Replies View Related

Where To Keep Dts(s) If I Don't To Upgrade Them Packages In Sql2005

Nov 30, 2005

Hi,
reading BOL of 2005 and have few questions about dts and SSIS


question #1
if I don't want to upgrade my DTS to SSIS ,no way I can save it in
msdb of 2005 ,so I have to do following


1. DTS package have to be saved as a COM-structured storage file
2. execute dts as dtsrun /Ffilename /Npackage_name /Mpackage_password


Am I right or missing some options ?


question #2
If I want to modify package in 2005 I have to do following
1. Export package to file from msdb
2. Use Studio to modify and test it
3. Drop package from msdb
4. Import package to msdb from file


Thanks


Alex

View 1 Replies View Related

Sql2005 Upgrade Queston

Nov 30, 2006

Hi guys,

I have done an in-place upgrade of a SQL2000 server to SQL2005 Ent. The upgrade was very smooth for the most part but when I check the versions of my databases they still say 8.0 and not 9.0. I'm able to change them to be 9.0 but I'm wondering why they were not changed automatically during the upgrade process? Any ides or is this something I have to be aware of for future upgrades?

Thanks for your time.

View 2 Replies View Related

Msg 2715 After Upgrade To SQL2005

Mar 12, 2008

After upgrading to MSSQL 2005 we have stored procedures which get this error
Msg 2715, Level 16, State 7, Procedure prc_sel_accruals, Line 37
Column, parameter, or variable #15: Cannot find data type umoney.

The user data type is defined in the database. I tried recompiling the SP, which suucceeds but then fails on execution.

The SP works under SQL2000. Is there anything we need to do after the conversion?

View 2 Replies View Related

Upgrade From SQL2000 To SQL2005

Mar 10, 2008

Hi,

I'm running a VB6 app with MDAC 2.8 on Windows Server 2003 SP1.
I create an ADO recordset with a SELECT statement which returns an empty recordset.
I then add 2 new records to it with AddNew and later perform an UpdateBatch.
Before the SQL upgrade it worked fine but now errors with:
'Cannot convert a char value to money. The char value has incorrect syntax.'
I did a SQL Trace to find out what the Updatebatch was actualling sending to SQL (listed below).
This works fine when I run it on Query Analyser using SQL 2000 but fails on SQL 2005.
I worked out the problem is linked to the columns NewValue and OldValue both are varchar 70.
The first insert has them defined varchar(7) and varchar(1). This insert succeeds, but the second insert has the columns defined as varchar(18) and varchar(12). This one fails (unless they only contains numbers!).
I'm confused.
I've read that sp_executesql has changed for SQL2005.
Any ideas anyone?

Thanks

Howard





Code Snippet
exec sp_executesql N'INSERT INTO "pit1_lamda".."Planalt"
("ElNo","Item","MvmtDate","NewValue","OldValue","PlanAltId","PlanNo","Timestamp","User_Id","RBNo","CreatorId","CreatorTypeCode","CreatedDate","ExitNo","PBTxnTriggerId","PremHistNo","RegContractPremium","WaiverPrem","SinglePremTot","PlanMvtId","SingMvtID","PLFAID","TrancheId")
VALUES (@P1,@P2,@P3,@P4,@P5,@P6,@P7,@P8,@P9,@P10,@P11,@P12,@P13,@P14,@P15,@P16,@P17,@P18,@P19,@P20,@P21,@P22,@P23); INSERT INTO
"pit1_lamda".."Planalt"
("ElNo","Item","MvmtDate","NewValue","OldValue","PlanAltId","PlanNo","Timestamp","User_Id","RBNo","CreatorId","CreatorTypeCode","CreatedDate","ExitNo","PBTxnTriggerId","PremHistNo","RegContractPremium","WaiverPrem","SinglePremTot","PlanMvtId","SingMvtID","PLFAID","TrancheId")
VALUES (@P24,@P25,@P26,@P27,@P28,@P29,@P30,@P31,@P32,@P33,@P34,@P35,@P36,@P37,@P38,@P39,@P40,@P41,@P42,@P43,@P44,@P45,@P46)',N'
@P1 varchar(6),@P2 int,@P3 datetime,@P4 varchar(7),@P5 varchar(1),@P6 int,@P7 varchar(12),@P8 int,@P9 varchar(8),@P10 varchar(4),@P11
varchar(12),@P12 tinyint,@P13 datetime,@P14 int,@P15 int,@P16 int,@P17 money,@P18 money,@P19 money,@P20 int,@P21 int,@P22 int,@P23 int,
@P24 varchar(6),@P25 int,@P26 datetime,@P27 varchar(18),@P28 varchar(12),@P29 int,@P30 varchar(12),@P31 int,@P32 varchar(8),@P33 varchar(4),@P34
varchar(12),@P35 tinyint,@P36 datetime,@P37 int,@P38 int,@P39 int,@P40 money,@P41 money,@P42 money,@P43 int,@P44 int,@P45 int,@P46 int',
'000000',80,'01-01-2008','1463286','0',27425002,'043902305X2 ',57153,'mtstdat4','0000',
'mtstdat4 ',1,'03-05-2008',0,0,0,$0.0000,$0.0000,$0.0000,4250207,0,0,3001752,
'000000',11,'03-02-2008','10 In Force (V011)','3 AwaitIssue',27425003,'043902305X2 ',57155,'mtstdat4','0000',
'mtstdat4 ',1,'03-05-2008',0,0,0,$0.0000,$0.0000,$0.0000,4250207,0,0,3001752







View 5 Replies View Related

Upgrade Database From Beta To SQL2005??

Jan 4, 2006

Ok is this possible?? 
I tried to import data thinking it should just work - ha ha!  Threw lots of errors about table and column mapping instead.
Hodgehegs

View 2 Replies View Related

Upgrade To SQL2005 - Installed Instances

Nov 5, 2006

 

My SQL2000 databases did not upgrade to SQL2005.  When I look at the Properties>>Options>>Compatibility Level the only options I have is version 7 and version 8... version 9 - which is SQL2005, is not there.

So what did I do?  During the upgrade process  - the installation wizard -  I made a couple of choices that I believe might have lead to my current condition.  The first thing is that I chose to select a installed instance.  The second choice I made was to use a domain user account for the Authentication.  The second selection I believe had nothing to do with the condition, but I did notice that my Systems Admin user account for SQL is no longer availble... which is a problem because now when I log into the SQL Management Console... it's using the domain name to authenticate rather than using the SA name like it was in SQL2000.

So here is what I think the solution is... I need to create a new Server Registration and create the databases in the new instance and then restore the data from SQL2000 to SQL2005 new instance, and then I can change the Compatibility Level to version 9.

The only issue I still don't have an answer for is the authentication into SQL.  I want to not use the domain user account... how can I change this or can I?  This also creates an issue when creating the ODBC connection as it wants to use the domain user account to verify.

So if someone can let me know if this is the right direction?  Also any suggestions... i would greatly appreciate it!

John   

 

View 1 Replies View Related

SQL2005 Upgrade Advisor's Warning

Nov 6, 2006

hi there

I have remote SQL2000 server and have client of it on my system.

As I try to check upgrade issues with SQL2005 Upgrade advisor by writing server name and pressing DETECT button,it gives me error--"Requested registry access is not allowed.(mscorlib)".

Could you tell me what are the access i will need to run Sql 2005 upgrade on remote server.





View 9 Replies View Related

Maitenace Plan Check Database Integrity Task Fails With Failed:(0) Alter Failed For Server 'xyz'

Feb 21, 2008



Hi,



I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042.
I have a common maintenance plan that runs on each of the servers. The maintenance plan runs
fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:


Check Database integrity on Local server connection
Databases: <list of databases>
Include indexes
Task start: 2008-02-21T00:05:42.
Task end: 2008-02-21T00:05:46.
Failed0) Alter failed for Server €˜XYZ€™

I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time.
If I run the DBCC manually against the databases they all report fine.


I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.

Does anyone know what the problem could be?

View 23 Replies View Related

Cannot Open Database ***, Login Failed By Using SQL2005 Express

Apr 2, 2008

Hi,

I have a problem to connect to SQL2005 Express Database with VC++ as regular user, not window system administrator.(If i login as window system admin, everything's working fine.)

A. I tried to use SQL2005 Express Server authentication, the error msg is:
Code= 80004005 €œunspecified error€? Cannot open database ***, login failed.

1. I am using Server authentication with username and password.
2. Gave all the permission of Program FilesMicrosoft SQL ServerMSSQL.1 and Program FilesMicrosoft SQL ServerMSSQL.2 to this regular window user.
3. Connection String is:
Provider=SQLNCLI;Initial Catalog=***; User ID=***;Password=***;Data Source=***;Persist Security Info=False;Integrated Security=SSPI;


B. I tried to use Window authentication by adding User Instance, but the error is:
Code= 80004005 €œunspecified error€? MS Native Client
Description = Invalid connection string attribute.

Connection String is:
Provider=SQLNCLI;Initial Catalog=***; Data Source=***;Persist Security Info=False;User Instance=True;Integrated Security=SSPI;AttachDBFileName=directory***.mdf;

Any idea? Thanks.

View 3 Replies View Related

Xp_cmdshell: A Call To 'CreateProcess' Failed With Error Code: '5' (under SQL2005 RTM)

Mar 28, 2006

I get this error when trying to run xp_cmdshell. I have turned on xp_cmdshell via sp_configure and verified it is on (set to 1) by running sp_configure again. The login trying to run xp_cmdshell has sysadmin privileges. If anyone has a solution please let me know.

View 8 Replies View Related

SQL2005 Equivalent Of The Data Import Task In SQL2000

Jun 18, 2006

I had to upgrade to SQL2005 when my customer did so. Everything went OK until I had to load additional data to the datamart. The SQL2000 task to load data from flat text files was straight forward and literally took me seconds tyo set up and execute and has never given me problems. I have now spent 3 days straight trying to do the same in SQL2005 going in ever wider circles. I have got SSIS up and going, I saved a dtsx package that won't run without a multitude of errors ranging from truncation errors (which I tried to avoid by meticulously ensuring all field definitions on the import and export side are defined and correct) to errors relating to not being able to connect to the database I am working on or of not having the right security access. I am at my wits end. I need help!

View 8 Replies View Related

Sql 2005 SP1 (x86) Upgrade Failed....

Apr 21, 2006

Installed sql 2005 sp1 on standalone Win 2003 Server box in workgroup. (sql 2000 is default instance, sql 2005 is named instance and sql 2005 Express is floating around somewhere).). Box does not have any prior CTP SP1 versions.

When I reach the "Authentication Mode" dialog during the SP1 install, and click Next, I get


"Your account information could not be verified for one or more instances. Ensure that you can connect to all the selected instances using the account information provided.."


I reset and restarted the sql 2005 database and reporting services using both a local account an the €œsa€? account. In both cases I received the above error message.

What am I missing here?


TIA,

Barking mad!


P.S. Sql9 log is as follows:

04/20/2006 21:18:23.265 ================================================================================
04/20/2006 21:18:23.265 Hotfix package launched
04/20/2006 21:18:24.890 Product discovery successfully completed during the install process for SQL2005
04/20/2006 21:18:24.890 SP Level check successfully completed during the install process for SQL2005
04/20/2006 21:18:24.890 Product language check successfully completed during the install process for SQL2005
04/20/2006 21:18:24.890 Product version check successfully completed during the install process for SQL2005
04/20/2006 21:18:25.218 Product discovery successfully completed during the install process for SQLEXPRESS
04/20/2006 21:18:25.234 SP Level check successfully completed during the install process for SQLEXPRESS
04/20/2006 21:18:25.234 Product language check successfully completed during the install process for SQLEXPRESS
04/20/2006 21:18:25.234 Product version check successfully completed during the install process for SQLEXPRESS
04/20/2006 21:18:25.234 Command-line instance name check completed during the install process
04/20/2006 21:18:25.234 Baseline build check completed during the install process

View 6 Replies View Related

Failed DTS Package Locks User Out Of SQL2005 (Windows Authentication) ... For Good!

Feb 13, 2006

Would be interested in any advice or comment on the issue we are experiencing with SQL 2005.

In order to test some DTS package migrations, we simply created a DTS package on SQL 2000 (using Export) to copy all database objects from one database to another.

Then we restored the source database on SQL 2005 server, migrated the DTS package, and tried to execute it.

The package migrated 'fine', ran part way, and then failed.  Since then we have been unable to connect to the server (Database Engine, or Integration Services) using Windows Authentication.  (Error 18456, Sev 16, State 11).

We can connect to the Database Engine using SQL Authentication (but not to Integration Services which only allows Windows Authentication).

We have been able to replicate this consistently - every annoying time we've tried it!

(Reinstalling SQL Server does 'fix' the issue ... until you try a similar package again).

View 2 Replies View Related

SQL2005 Cluster Install Fails - Task Did Not Appear To Start On Machine

May 3, 2007

On a multi node Win2003 x64 R2.

When preforming install for 2nd SQL instance. Setup fails with log entries



Task did not appear to start on machine NODE2 : 267013

Task did not appear to start on machine NODE3 : 267013



Note: first install worked fine - after getting over MSDTC issues...

Also have confirm task scheduler service is running on all nodes.



Anyone with some insights?



Regards

View 3 Replies View Related

In-place Upgrade From SQL 2000 SP4 Failed

Feb 19, 2008

Perhaps someone here can give me a hand with this... I have three servers running SQL Server 2000. Two are running Windows Server 2000 SP4 with SQL 2000/SP4 and one Windows Server 2003 with SQL 2000/SP?(probably not 4). I copied the installation DVD to a network drive and successfully performed an in-place upgrade of the Windows Server 2003 machine. However, when I try to upgrade either of the other servers, I get an error indicating that I have a service pack problem.

Reason: Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Service pack requirement check:
Your upgrade is blocked because of service pack requirements. To proceed, apply the required service pack and then rerun SQL Server Setup. For more information about upgrade support, see the Version and Edition Upgrades topic in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.

My SQL 2005 media was probably released before SP4 was released because the Setup Help indicates that you can directly upgrade from SP3, but makes no mention of SP4. I can't imagine there are any migration problems with it since I can't find any reference to it as a problem on any SQL Server sites... So... I'm left wondering what my problem really is...

Any help would be appreciated.

View 6 Replies View Related

Failed To Upgrade MSDE2000 SP3a To SP4

Aug 24, 2006

Hi,

Recently when i try to upgrade my current MSDE 2000 (SP3a) to SP4, the system just keep on failing me. Here is the scenario:

1. Download the MSDE2000 SP4 from microsoft

2. Extract the SP4

3. Run the following command in either the command prompt or via a batch file:

echo off
echo "Start to Upgrade MSDE SP4 ... "
setup.exe /UPGRADESP SQLRUN INSTANCENAME=JSNG SECURITYMODE=SQL UPGRADEUSER=sa UPGRADEPWD=Th3B3st /L*v c:MSDE_Log.log
echo "SP4 Upgrade Process completed!"

4. Once the above batch file was runned, the standard SQL configuration screen (gathering information) will be triggered.

5. However after a while the installation will just stopped.

6. When i checked on the log, i have found out that the failure of installation is due to the system has failed to configure the server. PFB for the last few rows of the verbose log:

=== Logging stopped: 8/22/2006 17:36:49 ===
MSI (c) (90:88) [17:36:49:865]: Note: 1: 1729
MSI (c) (90:88) [17:36:49:865]: Product: Microsoft SQL Server Desktop Engine -- Configuration failed.

MSI (c) (90:88) [17:36:49:865]: Grabbed execution mutex.
MSI (c) (90:88) [17:36:49:865]: Cleaning up uninstalled install packages, if any exist
MSI (c) (90:88) [17:36:49:865]: MainEngineThread is returning 1603
=== Verbose logging stopped: 8/22/2006 17:36:49 ===

7. When i check the MSI Installer Event ID at Microsoft site, it just said that this is the server configuration problem and i cant find any solution.

Any forumers here experience the above before? Mind to share some thoughts?

FYI, my current MSDE configuration is as follow:

- MSDE 2000 Release A (SP3a - 8.00.760)

- Installed Instance = JSNG



Thanks.

regards,

JS

View 1 Replies View Related

The Script Files Failed To Load In Script Task When Setting A Breakpoint In The Task On Vista

Mar 15, 2007

I cannot set a breakpoint in a Script task and have it complete successfully. I am running Vista 32-bit and only the workstation tools for SQL Server 2005 SP2. The steps to recreate are:

1) Create a new SSIS project/package.
2) Add a Script Task.
3) Set a breakpoint in the Script Task.
4) Run the package.

When I remove the breakpoint, the script task succeeds. When I put it back the task fails. The execution results say "Error: The script files failed to load." I completely uninstalled all SQL Server 2005-related entries using the Programs and Features control panel, rebooted, reinstalled the Workstation Tools, then applied a freshly-downloaded SQL Server 2005 SP2 and rebooted. If I change "RecompileScriptIntoBinaryCode" to false the script fails whether there's a breakpoint or not. If it's true (the default), the script only fails when a breakpoint is set. I would like to be able to set a breakpoint to assist in debugging the package. For the time being, I can move the package to a different (non-Vista) OS, where it works fine, but I would like to be able to develop and debug on Vista.

View 4 Replies View Related

Setup And Upgrade :: Cluster Installation Failed

Oct 8, 2010

when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..

View 12 Replies View Related

Database Backup Failed After Server Upgrade To V12

Jul 21, 2015

We backup the database using the following method

1. launch the DacIESvcCli.exe at specified time, which in-turn calls the service (southeast asia).
2. the bacpac is created and uploaded to the specified storage

However, after upgrading the Server to V12, it failed to create bacpac file in the storage, there are no errors/no logs/no information.

View 4 Replies View Related

Step By Step SQL2000 Failover Cluster Upgrade To SQL2005

Oct 13, 2006

is there such a paper? if so, can you pls point me to it? thx in advance

View 4 Replies View Related

Setup And Upgrade :: Server Service Failed To Start

May 18, 2015

I'm trying to install SQL 2005 onto a 2012 R2 server. The install is failing at the end when it is trying to start the database service. I have looked in the install logs and I'm getting the following error. I'm running 8 virtual processors on the virtual machine (8 Cores). URL...

Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."The error is  (1067) The process terminated unexpectedly.
   
    <Failure Type='Fatal' Error='1067'>
    <EndFunc Name='LaunchFunction' Return='1067' GetLastError='203'>
    CustomAction Do_sqlScript.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    05/18/2015 14:56:41.705 [4924]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
   
[code]...

View 3 Replies View Related

Setup And Upgrade :: Failed To Run Patch Request For Instance

Sep 17, 2012

Having an issue updating SQL Server 2012 RTM Standard  to CU3.I'm getting the following error from the Detail log on each try: "Error: Failed to run patch request for instance: MSSQLSERVER (exit code: -2061893565)"I've tried rebooting the server, ensuring the user running the installer is a local admin account, ran the repair wizard on the SQL install...Nothing seems to work.I have two identical servers, the first has gone smoothly, this is bugging me...

Server: Dell R720XD, Dual E5-2643 CPU, 64Gb RAM, Windows Server 2008 R2 Enterprise x64, SQL Server 2012 RTM CU2 x64 Installed.

Final result: The patch installer has failed to update the following instance: MSSQLSERVER. To determine the reason for failure, review the log files.
  Exit code (Decimal):           -2061893565
  Start time:                    2012-09-17 16:25:32
  End time:                      2012-09-17 16:28:41
  Requested action:              Patch

Instance MSSQLSERVER overall summary:
  Final result:                  The patch installer has failed to update the shared features. To determine the reason for failure, review the log files.
  Exit code (Decimal):           -2061893565
  Start time:                    2012-09-17 16:27:21
  End time:                      2012-09-17 16:28:39
  Requested action:              Patch

[code]...

View 14 Replies View Related

Setup And Upgrade :: Not Clustered Or Cluster Service Is Up And Online - Failed

Feb 27, 2013

I installed a SQL server 2008 R2 on a 64 bit Stand alone system today morning

Now I am trying to apply SP1 on it. But it is not progressing further with the below. How to overcome this issue.

Note: Cluster services not installed on this server. Cluster service is not there in the services.msc as well.

View 10 Replies View Related

Setup And Upgrade :: 2012 - Database Engine Services Failed

Mar 26, 2013

I can't install the SQL Server 2012 Express version with tools downloaded from [URL]

I'm getting the following error: 

Error installing SQL Server Database Engine Services Instance Features
Could not find the Database Engine startup handle.
Error code: 0x851A0019

I'm trying to install a new stand-alone version with a default instance but always getting this error. From the features I'm installing the database engine services (not the replication), all the tools, only the basic management toolds and the SQL Client connectivity SDK.

Further in the installation I'm choosing the Windows authentication and in the list of SQL administrators I've already tried to install as current user but also as System. Both with the same error result.

[URL]

Note: Visual studio is not installed.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved