SQL2K: Deadlock On Lock
Sep 10, 2007
Hello,
I have scheduled a job using Job Agent in SQL2K (Management). Every once in a while i get an error when i view job history:
Executed as user: xxx. Transaction (Process ID 53) was deadlocked on lock | communication buffer resources with another process and has been chosen as the deadlock victim. Rerun the transaction. [SQLSTATE 40001] (Error 1205). The step failed.
The process ID changes for every error. Sometimes its 51, 56, or 54 as well.
I have checked several times, but there is no other process that runs at that time. I even rescheduled it for a different time, but even then it fails about once every week or two.
How can i check what is the other procedure it is deadlocking with, if it is? OR what exactly is the problem, if it is not with any other process?
Any help and/or guidance is much appreciated.
Thanks,
J
View 4 Replies
ADVERTISEMENT
Feb 2, 2007
I simply made my script task (or any other task) fail
In my package error handler i have a Exec SQL task - for Stored Proc
SP statement is set in following expression (works fine in design time):
"EXEC [dbo].[us_sp_Insert_STG_FEED_EVENT_LOG] @FEED_ID= " + (DT_WSTR,10) @[User::FEED_ID] + ", @FEED_EVENT_LOG_TYPE_ID = 3, @STARTED_ON = '"+(DT_WSTR,30)@[System::StartTime] +"', @ENDED_ON = NULL, @message = 'Package failed. ErrorCode: "+(DT_WSTR,10)@[System::ErrorCode]+" ErrorMsg: "+@[System::ErrorDescription]+"', @FILES_PROCESSED = '" + @[User::t_ProcessedFiles] + "', @PKG_EXECUTION_ID = '" + @[System::ExecutionInstanceGUID] + "'"
From progress:
Error: The Script returned a failure result.
Task SCR REIL Data failed
OnError - Task SQL Insert Error Msg
Error: A deadlock was detected while trying to lock variable "System::ErrorCode, System::ErrorDescription, System::ExecutionInstanceGUID, System::StartTime, User::FEED_ID, User::t_ProcessedFiles" for read access. A lock could not be acquired after 16 attempts and timed out.
Error: The expression ""EXEC [dbo].[us_sp_Insert_STG_FEED_EVENT_LOG] @FEED_ID= " + (DT_WSTR,10) @[User::FEED_ID] + ", @FEED_EVENT_LOG_TYPE_ID = 3, @STARTED_ON = '"+(DT_WSTR,30)@[System::StartTime] +"', @ENDED_ON = NULL, @message = 'Package failed. ErrorCode: "+(DT_WSTR,10)@[System::ErrorCode]+" ErrorMsg: "+@[System::ErrorDescription]+"', @FILES_PROCESSED = '" + @[User::t_ProcessedFiles] + "', @PKG_EXECUTION_ID = '" + @[System::ExecutionInstanceGUID] + "'"" on property "SqlStatementSource" cannot be evaluated. Modify the expression to be valid.
Warning: The Execution method succeeded, but the number of errors raised (4) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
And how did I get 4 errors? - I only set my script task result to failure
View 11 Replies
View Related
Jan 24, 2006
I have a small database and a smalll table ( Table ID=565577053,with two
indexes on this table). when more than one user connected, I got the deadlock on the index KEY and PAGE lock. I setup index with "DisallowRowLock" and "DisallowPageLock" , seems kill the index KEY and PAGE lock problem, but I got this TAB lock situation instead as following:
2006-01-18 09:51:37.87 spid4 ----------------------------------
2006-01-18 09:51:37.87 spid4 Starting deadlock search 15
Deadlock encountered .... Printing deadlock information
2006-01-18 09:51:37.87 spid4
2006-01-18 09:51:37.87 spid4 Wait-for graph
2006-01-18 09:51:37.87 spid4
2006-01-18 09:51:37.87 spid4 Node:1
2006-01-18 09:51:37.87 spid4 TAB: 10:565577053 [] CleanCnt:3
Mode: S Flags: 0x0
2006-01-18 09:51:37.87 spid4 Grant List 0::
2006-01-18 09:51:37.87 spid4 Owner:0x42c03ba0 Mode: S Flg:0x0
Ref:2 Life:02000000 SPID:77 ECID:0
2006-01-18 09:51:37.87 spid4 SPID: 77 ECID: 0 Statement Type: DELETE
Line #: 1
2006-01-18 09:51:37.87 spid4 Input Buf: RPC Event: sp_executesql;1
2006-01-18 09:51:37.87 spid4 Requested By:
2006-01-18 09:51:37.87 spid4 ResType:LockOwner Stype:'OR' Mode: IX
SPID:64 ECID:0 Ec:(0x4AEAF530) Value:0x42c0df00 Cost:(0/D4)
2006-01-18 09:51:37.87 spid4
2006-01-18 09:51:37.87 spid4 Node:2
2006-01-18 09:51:37.87 spid4 TAB: 10:565577053 [] CleanCnt:3
Mode: S Flags: 0x0
2006-01-18 09:51:37.87 spid4 Grant List 0::
2006-01-18 09:51:37.87 spid4 Owner:0x42c03e00 Mode: S Flg:0x0
Ref:2 Life:02000000 SPID:64 ECID:0
2006-01-18 09:51:37.87 spid4 SPID: 64 ECID: 0 Statement Type: DELETE
Line #: 1
2006-01-18 09:51:37.87 spid4 Input Buf: RPC Event: sp_executesql;1
2006-01-18 09:51:37.87 spid4 Requested By:
2006-01-18 09:51:37.87 spid4 ResType:LockOwner Stype:'OR' Mode: IX
SPID:77 ECID:0 Ec:(0x4951D530) Value:0x42c03da0 Cost:(0/D4)
2006-01-18 09:51:37.87 spid4 Victim Resource Owner:
2006-01-18 09:51:37.87 spid4 ResType:LockOwner Stype:'OR' Mode: IX
SPID:77 ECID:0 Ec:(0x4951D530) Value:0x42c03da0 Cost:(0/D4)
2006-01-18 09:51:37.87 spid4
2006-01-18 09:51:37.87 spid4 End deadlock search 15 ... a deadlock was
found.
2006-01-18 09:51:37.87 spid4 ----------------------------------
How can I get rid of this deadlock without changing the application
code(without using set the isolation level or NOLOCK hint). When I load more
data, will this problem goes away?
Any kind of help will be appreciate.
Hanson
View 9 Replies
View Related
Apr 22, 2008
Hello, I'm gettting a deadlock. One of the resources is a metadata lock in service broker.
this is from the deadlock graph.
<process id="process1fc2325c8" taskpriority="0" logused="0" waitresource="METADATA: database_id = 5 CONVERSATION_GROUP($hash = 0xa927b1ef:0x691c259b:0xd5edc9)" waittime="13250" ownerId="3702420299" transactionname="GetDialogByHandle" lasttranstarted="2008-04-22T10:46:31.457" XDES="0x927baaf8" lockMode="X" schedulerid="2" kpid="7316" status="suspended" spid="173" sbid="2" ecid="0" priority="0" transcount="2" lastbatchstarted="2008-04-22T10:46:31.457" lastbatchcompleted="2008-04-22T10:45:51.567" clientapp="SQL Queue Activation Service" hostname="82994-APP1" hostpid="2396" loginname="VIAGOGORSQueue.Activation" isolationlevel="serializable (4)" xactid="3702420292" currentdb="5" lockTimeout="4294967295" clientoption1="673185824" clientoption2="128056">
would anyone shed some light??
thanks!
View 4 Replies
View Related
May 12, 2008
Hi ,
I have some issues with deadlock.I am getting deadlock becuase of two
select on same table. The sql server log is like this ,
Select statements should have always shared lock.I am not getting why
its doing exclusive lock and creating deadlock.
5/6/2008 12:38 spid4s Unknown Deadlock encountered €¦. Printing
deadlock information
5/6/2008 12:38 spid4s Unknown Wait-for graph
5/6/2008 12:38 spid4s Unknown Log Viewer could not read information
for this log entry. Cause: Data is Null. This method or property
cannot be called on Null values.. Content:
5/6/2008 12:38 spid4s Unknown Node:1
5/6/2008 12:38 spid4s Unknown KEY: 9:72057594050117632 (8d036f07c58f)
CleanCnt:3 Mode Flags: 0×0
5/6/2008 12:38 spid4s Unknown Grant List 3:
5/6/2008 12:38 spid4s Unknown Owner:0×12E9F160 Mode: S Flg:0×0 Ref:1
Life:00000001 SPID:68 ECID:0 XactLockInfo: 0×353D1C54
5/6/2008 12:38 spid4s Unknown SPID: 68 ECID: 0 Statement Type: SELECT
Line #: 4
5/6/2008 12:38 spid4s Unknown Input Buf: Language Event: (@actDefId
nvarchar(36)@stateList varchar(1)@stateList1 varchar(1)@procRelObjType
smallint@procRelObjIdList varchar(36))
5/6/2008 12:38 spid4s Unknown Requested By:
5/6/2008 12:38 spid4s Unknown ResType:LockOwner Stype:€™OR€™Xdes:
0×2FBB67F0 Mode: X SPID:112 BatchID:0 ECID:0 TaskProxy0×0792E378)
Value:0×38baa20 Cost0/11888)
5/6/2008 12:38 spid4s Unknown Log Viewer could not read information
for this log entry. Cause: Data is Null. This method or property
cannot be called on Null values.. Content:
5/6/2008 12:38 spid4s Unknown Node:2
5/6/2008 12:38 spid4s Unknown KEY: 9:72057594049986560 (6f02e1cd37c3)
CleanCnt:3 Mode:X Flags: 0×0
5/6/2008 12:38 spid4s Unknown Wait List:
5/6/2008 12:38 spid4s Unknown Owner:0×12396EE0 Mode: S Flg:0×2 Ref:1
Life:00000000 SPID:90 ECID:0 XactLockInfo: 0×0AA8178C
5/6/2008 12:38 spid4s Unknown SPID: 90 ECID: 0 Statement Type: SELECT
Line #: 4
5/6/2008 12:38 spid4s Unknown Input Buf: Language Event: (@actDefId
nvarchar(36)@stateList varchar(1)@stateList1 varchar(1)@procRelObjType
smallint@procRelObjIdList varchar(36))
5/6/2008 12:38 spid4s Unknown Requested By:
5/6/2008 12:38 spid4s Unknown ResType:LockOwner Stype:€™OR€™Xdes:
0×353D1C30 Mode: S SPID:68 BatchID:0 ECID:0 TaskProxy0×13B3E378)
Value:0×12e9e780 Cost0/6164)
5/6/2008 12:38 spid4s Unknown Log Viewer could not read information
for this log entry. Cause: Data is Null. This method or property
cannot be called on Null values.. Content:
If you have any idea regarding this please let me know ASAP.
Thanks in advance .
View 4 Replies
View Related
Oct 17, 2007
I have a deadlock that I can't figure out. Both processes are doing a select from the same table. The owner mode on both is IX and the request mode is S. The lock is a Page Lock.
How do I resolve this?
View 14 Replies
View Related
Mar 20, 2008
Hi Friends,
I have a problem to read varibale inside script.
the error discription is following-
Error: A deadlock was detected while trying to lock variables "User::FilePath" for read/write access. A lock cannot be acquired after 16 attempts. The locks timed out.
this is my code. i my code i am using two variables, but i can access only one .
i have to retrive file directory and file path is generated by other system.
Public Sub Main()
'
' Add your code here
'
Dim vars As Variables
If Not vars Is Nothing Then
vars.Unlock()
End If
Dim lFileName As String = String.Empty
Dim lFilePath As String = String.Empty
Dts.VariableDispenser.LockOneForWrite("FilePath", vars)
Dts.VariableDispenser.LockOneForRead("FileName", vars)
Dts.VariableDispenser.GetVariables(vars)
lFileName = vars.Item("FileName").Value.ToString
lFilePath = GetDirectoryName(lFileName)
If Not lFilePath.EndsWith("") Then
lFilePath = String.Format("{0}", lFilePath)
End If
vars("UnzippedKeyStatFilePath").Value = lFilePath
vars.Unlock()
Dts.TaskResult = Dts.Results.Success
End Sub
Thanks
Manish Jain
View 4 Replies
View Related
Nov 14, 2007
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
View 4 Replies
View Related
Oct 12, 2007
The company for which I work did not have a DBA until I started a few weeks ago. Whoever installed SQL2K used the wrong CD so they have been running Personal Edition on their servers. I have installed a new SQL2K standard instance and have restored everything except the jobs and DTS packages. Can the msdb from the Personal edition be restored to the standard instance?
View 3 Replies
View Related
Mar 15, 2007
Is it possible to downgrade SQL from Enterprise to Standard Edition, or do you have to remove the previous installation (uninstall) and reinstall. Meaning you would also have to restore all user databases? Thanks.
View 1 Replies
View Related
Nov 10, 2015
Is there a way to send out an email woth deadlock information (victim query, winner query, process id's and resources on which the deadlock occurred) as soon as a deadlock occurs in a database or at instance level?I currently has trace flag 1222 turned on. And also created an alert that send me an email whenever a deadlock occurs. but it just says that a deadlock occurred and I log into sql server error log and review the information.
View 5 Replies
View Related
Apr 7, 2004
Hi
We are facing an acute situation in our web-application. Technology is ASP.NEt/VB.NET, SQL Server 2000.
Consider a scenario in which User 1 is clicking on a button which calls a SQL stored procedure. This procedure selects Group A of records of Database Page1.
At the same time if User 2 also clicks the same button which calls same SQL stored procedure. This procedure selects Group B of records of Database Page1.
So, its the same Page1 but different sets of records. At this moment, both the calls have shared locked on the Page1 inside the procedure.
Now, in call 1, inside the procedure after selecting Group A of records, the next statement is and update to those records. As soon as update statement executes, SQL Server throws a deadlock exception as follows :
Transaction (Process ID 78) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction
We are able to understand why its happening. Its because, Group A and Group B of records are on the same Page1. But both the users have shared lock on the Page1. So, no one gets the exclusive lock in records for update, even though, the records are different.
How can I resolve this issue? How can I get lock on wanted rows instead of entire page?
Please advice. Thanks a bunch.
Pankaj
View 1 Replies
View Related
May 22, 2006
Hi,
I have set of 2 DTS packages, one of which calls the other by forming a command-line (dtexec) using a Execute Process task.
From the parent package-> Execute Process Task->
dtsexec /F etc... /<pkg variable> = "servername"
Each of the parent and the called package have a variable: "User::DWServerSQLInstance" which is mapped to the SQL server connection manager server name property using an expression. The outer package has the above variable and so does the inner called package (which gets assigned through the command line from the outerpackage call to inner)
I "sometimes" get the following error:
OnError,I4,TESTDOMAdministrator,ACDWAggregation,{A1F8E43F-15F1-4685-8C18-6866AB31E62B},{77B2F3C7-6756-46EB-8C01-D880598FB4B3},5/22/2006 5:10:28 PM,5/22/2006 5:10:28 PM,-1073659822,0x,The variable "User::DWServerSQLInstance" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
Help would be appreciated!
I have seen other posts on this but, not able to relate the solution to my scenario.
View 9 Replies
View Related
May 10, 2006
Hi All,
I have seen a few other people have this error.
Package works fine when run from BIDS, DTExec, dtexecui. When I schedule it, It get these random errors. (See below)
The main culprit is a variable called "RecordsetFileDIR" which is set using an expression. (@[User::_ROOT] + "RecordSets\")
A number of other variables use this as part of their expression and as they all fail, pretty much everything dies.
I have installed SP1 (Not Beta) on server. Package uses config files to set the value of _ROOT.
The error does not always seem to be with this particular variable though. Always a variable that uses an expression but errors are random. Also, It will run 3 out of 10 times without a problem. I am the only person on the server at the time.
Any ideas?
Cheers,
Crispin
Error log:
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073659822,0x,The variable "User::RecordsetFileDIR" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073639420,0x,The expression for variable "rsHeaderFile" failed evaluation. There was an error in the expression.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
View 1 Replies
View Related
May 23, 2001
Hi,
I want to lock a table so others cannot lock it but able to read it inside transactions.
The coding I need is something like this: set implicit_transactions on begin transaction select * from table1 with (tablock, holdlock) update table2 set field1 = 'test' commit transaction commit transaction
I have tried the coding above, it won't prevent others from locking table1.
So, I changed the tablock to tablockx to prevent others from locking table1. But this will also prevent others from reading table1. So, how can I lock table1 so others cannot lock it but still able to read it?
Thank you for any help
View 1 Replies
View Related
Nov 30, 2001
Hi,I am having a problem in moving data from execl to sql2k.
The data looks like 16.70% , 12.5% etc and when I move it it changes to 0.16700000000000001 etc..
any idea what datatype I should use so that it don't changes it's mode...
Thanks in advance
View 1 Replies
View Related
Apr 6, 2001
Hi,
I am new to sql 2k.
Iam been asked to install sql2k on a new box .
What all things I should keep in mind when I go for the installation of sql2k?
Any / All suggestions appreciated.
Jai
View 3 Replies
View Related
Apr 6, 2001
Hi,
I have to move 2 fields from sql 7 to sql 2k .
the field is text.
feild a is text
field b is text.
I have to add field a and field b and move it to another field (say field c which is also text )in sql 2k.
How to go about it?
TIA.
Jsi
View 2 Replies
View Related
Jun 23, 2001
I moved my DB from SQL7.0/NT to SQL2k/WIN2k.
Everything was fine from the last few months but suddenly I start getting timeout errors.
I checked and rebuild all the indexes - there are no deadlocking at all - everything looks quite normal to me - I am all lost now as what to monitor and where to see for this timeout error messages.
Anyone has any idea as what is going on what should I check to see if that's the cause.
I also ran Profiler but there too nothing too long as to timeout.
My sql box is attached to IIS box and pager is set on IIS box.
The problem is not with IIS box cuz when I shift the applications to another SQL box everything runs fine and there is no timeout messages.
Any thoughts appreciated.
View 2 Replies
View Related
Jan 23, 2007
I have been sent a backup file from a supplier that I have been trying to restore. I have succesfully installed it on my SQL2K5 instance, however, we need to put it on our SQL Server in our DMZ . . . Which is running SQL2K . . . Supplier was informed of this and says that you can restore to a SQL2K DB as long as you use SQL Management Studio . . . Tried that and got an error message Saying That Restore Headeronly is terminating - Too many backup devices specified. . . only 64 are allowed. . . .Supplier suggests that its a SP4 issue . . . Installed SP4 and tried again . . . Got the Same Error again (SQL Server Error :3205)
Am I out of my gourd I am sure that restoring a SQL2K5 Backup to a SQL2K instance is not possible?
I should say that I am Running SQLExpress as my 2K5 Instance and MSDE as my 2K instance . . . Before I invest more time on this and trying it on a development server running Standard edition.
Thanks All
--
Regards
Tony The DBA
View 4 Replies
View Related
May 9, 2008
Hello,
I am trying to script out a new login in SQL 2000. I can script the login, but I am trying to assign the correct permissions, (e.g. db_datawriter, db_owner) and I am have trouble scripting the permissions. Here is a snippet of what I am looking to accomplish in my script. Remeber, this is 2000 not 2005...
-- This works
exec sp_addlogin @loginame = 'LoginName'
,@passwd = 'Password'
,@defdb = 'Database'
go
-- This doesn't. I am not even sure if this is what I need...
exec sp_addrolemember @rolename = 'AdminCVB'
,@membername = 'db_owner'
go
View 3 Replies
View Related
Aug 31, 2004
hi,
i'm hoping somone can shed some light on why this isn't working. basically i have a webform which that passes data back to a database (SQL Server 2000) and uses Windows authentication to perform the UPDATE, INSERT, whatever.
i've defined a role within the database, specifically for the application. for my tests, i've added a global security group from my Windows domain to the logins on the SQL instance. this group has been added to the custom role in the application database.
since i'm a member of this global security group, i was under the impression that my credentials would pass through and everything would be ok, however, it's not recognizing my login - or others in the group as well.
the application web (in IIS5.0) has been set to Windows Authentication, and i've flagged the impersonate=true attribute in the app's web.config file.
lastly, my connection string for the sqlconnection object grabs my user name (or the current user for that matter) in the format of DOMAINaccount. for the sake of argument, i was able to successfully connect using a custom SQL login that was assigned to the custom role.
the error that's returned specifically states that the "Login failed for DOMAINaccount"
any thoughts on what's up here? i guess i'm not understanding SQL Server security to well. thanks in advance.
View 1 Replies
View Related
Nov 12, 2001
Hi,
Is there a way to prevent new users from accessing a SQL2000 db (like to put it into DBO mode) while leaving current users finish their running jobs.
I tried Alter Database and sp_dboptions and both in SQL2000 requires to close all current users. It was working in SQL7 but not in 2000.
Thanks
AAA
View 3 Replies
View Related
Apr 6, 2001
Does any body know if it is possible to register SQL 2000 server from SQL v7.0 enterprise manager.
Thanks
View 5 Replies
View Related
Jan 4, 2001
I don't have any extra machines, so I'm thinking of evaluating SQL2K on one of my existing boxes with SQL 7 already installed. My experience is that SQL 6.5 co-existed extraordinarily well with SQL 7. Does the same apply to the SQL 7 / SQL 2K combination? Thanks!
View 1 Replies
View Related
Jan 4, 2001
I don't have any extra machines, so I'm thinking of evaluating SQL2K on one of my existing boxes with SQL 7 already installed. My experience is that SQL 6.5 co-existed extraordinarily well with SQL 7. Does the same apply to the SQL 7 / SQL 2K combination? Thanks!
View 3 Replies
View Related
May 24, 2003
I am new to sql2k
previously i used to work with sql7
how do i clear the transaction logs in sql2k
pavan
View 2 Replies
View Related
Sep 17, 2003
I am planning to use XP_CRYPT for encrypting and decrypting cc#'s, passwords etc., at database level. Any suggestions or experiences on this. More info about this product at
http://www.activecrypt.com/faq.htm
View 12 Replies
View Related
Jun 11, 2004
I tried to install SQL Server 2K on a W2K server running IIS and SSL. The SQL installation failed until I deleted the certs from my system. Now, the SQL logs say "SuperSocket Info: Bind failed on TCP port 1433". I have tried everything on the MS KB, TechNet, and MSDN sites that I could find. I have also uninstalled IIS and Certificate Services from the server. Since there are no certs left, I suspect that SQL Server is getting in it's own way on startup. Does anyone know of a way to trap/log this kind of conflict?
View 14 Replies
View Related
Jan 24, 2002
Here is a strange one. Have a sql2k box that I upgraded from 6.5 back. Conversion went fine, everything was ok with the sql install. Created and scheduled maintenance jobs while logged on to the box. A few days after the conversion, Enterprise Manager cannot register the server(error message is 'Data source name not found and connection libraries do not exist'). This inablilty to register the server only occurs when working on the server itself. You can register the server while connecting from another box with EM.
So, do some checking and find that the box itself does not recognize SQLSRV32.dll (etc) as even existing on the box BUT IT DOES EXIST in the normal places, it was a working install just a few days prior. As far as the box is concerned, the network libraries do not exist. Therefore, cannot register the server locally, cannot create a Data Source using the SQLSRV32 driver, cannot start the Sql Server Agent(so no scheduled back ups, etc).
Went so far as to re install the connectivity and client tools, which did not fix the issue.
Does anyone have any ideas?
View 1 Replies
View Related
Jan 26, 2002
I am trying to configure a 2 node SQL cluster. MSCS is configured and is failing over correctly, however when I start the installation of SQL Server, and specify the IP address of the virtual server and hit next, the installation hangs, and stops responding. I have configured MS DTC and verified that it shows up in the cluster administrator. I am not sure what else to do, please help.
View 2 Replies
View Related
Apr 8, 2002
We are running SQL2000 on Compaq 8500, want to upgrade the RAM from 4GB to 6GB. What do I need to change in SQL in order to see the more memory?
We want to leave only 1GB for the OS and the rest for SQL2K.
Thanks
View 1 Replies
View Related
Dec 30, 2005
Hi
I have an sql server with very high usage. The web which is connected to the sql server has approx. 1000 unique visitors every time.
The database is optimized and the site goes really fast now.
But a problem we've had since the beginning is that SQL Server constantly uses 1.8 GB of RAM. Never less, never more.
Do you have any idea on how to decrease the usage of RAM. I am sure that this high usage is necessary.
View 4 Replies
View Related
