I installed SP1 for SS 2005 on a quasi-production server, which is why I didn't mind rebooting the server. Unfortunately, it's been 5 hours and the server still hasn't rebooted. (I see a gray screen and a pointer, and that's it... but there's still disk access happening. I'm not really sure what it's doing.)
What's the best way to avoid the 5 hour reboot in the future?
Thanks,
Robert
Hi all, I'm trying to install MSDE in silent mode and without using a .ini file (on a machine with windows 2000 server and SQL 2000 already insatalled).
At the end of the installation, the machine reboot automatically, but I need to stop this reboot.
Someone can help me?
Thanks all
Have people installed SP2 on SQL2k5 . Any problems / issues with that especially wrt failover clustering .
View 4 Replies View RelatedHow to schedule a DTS package residing in LEGACY container, from SQL2K5?
------------------------
I think, therefore I am - Rene Descartes
In SQL2K EM you can right click a DB, and backup. Finally there is a option to schedule, which will create a job.
Is this option has been removed from SQL2K5?
------------------------
I think, therefore I am - Rene Descartes
Is there any reason why an application running on a 32-bit O/S that works with a SQL Server 2K database would not work with a SQL Server 2K5 64-bit database running on a 64-bit O/S?
It is my understanding that the connection layer (be it ODBC, OLEDB, ADODB, etc) would obfuscate any details regarding the underlying architecture... I wouldn't think the instructions sent would need to be any different, unless there is some deprecated call that is no longer supported.
Thanks in advance for any assistance!
Hello,
I have installed in a workstation (windows xp pro) sql 7 server (database engine + client tools).
After that I installed sql server 2005 with named instance (hostmyinstance).But I didn't end this installation.
I had a message saying me that there are problems on clients tools. moreover when I open a dos window and type "sqlcmd", I have the same message (client problems).
I then change my sql7 port to 1434 (which isn't the default port).But even with that my sql 2005 sqlcmd don't work correctly.
My question is :
can one install sql 7 (server + client tools) and sql 2005 (server + client tools) in the same machine ( a workstation [windows xp pro] )?
Our NT person thinks that rebooting the SQL 2000 (on WIn 2000) server every month is a good idea (this is a client production box). I am strongly against it. For starters any trends I am trying to capture with performance monitor become useless every time we do this. I am willing to listen to every one's opinion, but I hope by now that SQL 2000 is stable enough not to have to do this.
View 1 Replies View RelatedI seem to recall somewhere that a Microsoft Windows Server (2000 for example) should be rebooted once a week.
Is this an urban myth? If so....I can't seem to find a doc on it.
googled:
microsoft server maintenance reboot schedule recommendation
thoughts?
I'm very new to SQL Server. I need to reboot the server for some reason. I need your help to list out what a the step that I need to follow to perform this process.
Regards,
Ilmi
After reboot, some db were detached, some not.
How come?
Hello,I have a server running Windows 2000 Advanced and Sql Server. Thesystems runs fine throughout the day but reboots at night, somtimesmultiple times. The event log has a message that reads "The previoussystem shutdown at X:XX PM was unexpected."Any ideas?Paul
View 3 Replies View RelatedHi all,I wanted SQL server to sent me an email when it reboots. I created an Alertbut doesn't seem to be working. Any suggestions.Thanks,
View 1 Replies View RelatedDear All,
I have a need to replicate data between MS Access and SQL 2005 (Enterprise Edition).
Could someone give advice as to whether this is possible or not, and how I might go about setting it up?
Thanks
Krishna
I found that SQL2K5 doesn't prompt for file locations while installing - for binaries and databases. Is this the default behavior?
------------------------
I think, therefore I am - Rene Descartes
Hi
I am a Oracle DBA who is going to embark upon a
oppurtunity to migrate Oracle to sqlserver.
Can somebody give me tips for
Learning sqlserver2k5 for a Oracle DBA Books
Or Beginner DBA/Development Books for sql2k5
How good is the migration assistant from m$$ for
migrating from oracle to sql2k5
Does it migrate data as well as procedural code ?
Do you anything for me to watch out for best parctices
migration guides
You opinion would be higly appreciated
regards
db2hrishy
For a SQL/2005 DB Server do I need the /3GB switch or not? I will have IIS running on the server; however, it won't be doing very much as the SQL Database is the main thing:
Windows 2003 R2 Enterprise w/16 GIG RAM 4 CPU (Virtual Machine)
SQL/2005 Enterprise Edition
Hardware: Dell Server 8 CPU w/32 GIG RAM running VM ESX V3
I know I need the /PAE switch to utilize Memory over 4 GB - the question is do I need the /3GB switch along with the /PAE switch?
DeWayne
I need tyo move tables from Oracle 9.2 or 10.2 version to SQL server 2005.Can any one give me some good hints, scripts etc.I try to look into the Business Intellegent Studio, but I only see Report,Analaysis or Integration services - NO DTS.Can someone tell me where to find it. It used to be so easy in 2000.Thanks,Nasir
View 4 Replies View RelatedI have a partition view named StudentRequest with underlying tables StudentRequest_T1 and StudentRequest_T2.
Primary Key is on NumericSchoolDBN, SchoolYear, TermId, StudentID, CourseCode
Partition View
Create View dbo.StudentRequestPartView with SchemaBinding
as
Select
NumericSchoolDBN, SchoolYear, TermId, StudentID, CourseCode, AssignedCourseCode, AssignedSectionId,
LockAssignedRequest, UpdatedByPID, UpdatedDate, CreatedByPID, CreatedDate, AuditCommentId, DebugTrace
from dbo.[StudentRequest_T1]
union all
Select
NumericSchoolDBN, SchoolYear, TermId, StudentID, CourseCode, AssignedCourseCode, AssignedSectionId,
LockAssignedRequest, UpdatedByPID, UpdatedDate, CreatedByPID, CreatedDate, AuditCommentId, DebugTrace
from dbo.[StudentRequest_T2]
go
Partition Tables
CREATE TABLE [dbo].[StudentRequest_T1](
[NumericSchoolDBN] [int] NOT NULL,
[SchoolYear] [smallint] NOT NULL,
[TermId] [tinyint] NOT NULL Check ([TermID] = 1),
[StudentID] [int] NOT NULL,
[CourseCode] [varchar](10) NOT NULL,
:
)
CREATE TABLE [dbo].[StudentRequest_T2](
[NumericSchoolDBN] [int] NOT NULL,
[SchoolYear] [smallint] NOT NULL,
[TermId] [tinyint] NOT NULL Check ([TermID] = 2),
[StudentID] [int] NOT NULL,
[CourseCode] [varchar](10) NOT NULL,
:
)
I am able to insert, update and delete records in the StudentRequest view using simple DML SQL statements i.e.
e.g.
Insert into Student Request (NumericSchoolDBN, SchoolYear, TermId,€¦)
Values(12345, 2006, 1,€¦)
Delete from StudentRequest Where NumericSchoolDBN = 12345 and TermId = 1
But when I use complex SQL statements using self-joins€¦
Insert into Student Request (NumericSchoolDBN, SchoolYear, TermId,€¦)
Select NumericSchoolDBN, SchoolYear, TermID,€¦.
From Student Request sr1 left outer join Student Request sr2 on
Sr1.NumericSchoolDBN = Sr1.NumericSchoolDBN and
Sr1.SchoolYear = Sr2.SchoolYear and
Sr1.TermId = Sr2.TermId and
Sr1.StudentID = Sr2.StudentID and
Sr1.CourseCode = Sr2.CourseCode
I get the following error and I can€™t seem to find any documentation that this is a limitation!!!...
Msg 4439, Level 16, State 6, Procedure Course_UpdateCoursePromotion, Line 232
Partitioned view 'STARS.dbo.StudentRequest' is not updatable because the source query contains references to partition table '[STARS].[dbo].[StudentRequest_T1]'.
Hi,
We recently migrated from a SQL 2K to 2K5. We had an automatic DTS scheduled every night that would transfer data to a MySQL server on one of our client€™s machine. It worked like a charm in SQL 2K.
I am trying to figure out how I can connect to a MySQL data source using SSIS in 2K5 as I don€™t see an ODBC Destination anywhere in the Data Flow Task; and run the same transfer using 2K5.
Do I have to add a reference of some kind or does 2K5 doesn€™t support ODBC destinations?
Thanks
Having problems installing SQL 2005 Developers Edition on a Terminal Services Server that already has SQL 2000 Developers Edition on it. I keep getting this error, no matter in what order I install packages:
Failed to install and configure assemblies M:Program FilesMicrosoft SQL Server90DTSTasksMicrosoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2147024894
Error message: The system cannot find the file specified.
Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
The help link says to set the DTC service up to run as a network service and start it, but it already is and is already running. Restarting the DTC and then clicking on retry yields the same error.
Any ideas? I've been beating my head against this machine for a couple of days now.
Thanks.
Phil Hershey
Hello everyone,
I need to get a server built for a client today. He has sent me the proof of purchase for his SQL2005. He is working on getting me the licence / cd key today (if thats even possible?).
I have our SQL 2005 server CD here that I wanted to use however when I get to the company name stage of the install the CD-key/licence code is greyed out. Any ideas on how I can change the embedded cdkey/licence to the clients so I can use our media today but with our clients cdkey?
This needs to be done today, its extremly important but due to a problem with logistics the media from the client was delayed untill mid next week.
Any help you can provide would be aprecaited.
Cheers
~Chris
I continue to have issues with SP-2 for SQL 2005 suite. It has now gotten so bad, I have multiple installations, including the TOOLS ONLY on my laptop failing, that I am going to stop ALL future installations of SP-2. The COM+ failures have not been resolved that I can determine. I have tried uninstalling, I have tried SP-1 before SP-2, every combination one can find. HELP.
Time: 05/07/2007 13:24:05.631
KB Number: KB921896
Machine: GA029-MDGRAVES
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Setup Support Files ENU 9.00.1399.06 x86
SQL Server Native Client ENU 9.00.3042.00 x86
Client Components ENU RTM 9.00.1399.06 x86 STANDARD
MSXML 6.0 Parser ENU 6.00.3883.8 x86
Backward Compatibility ENU 8.05.1054 x86
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Setup Support Files
Product Version (Previous): 1399
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlSupport.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Native Client
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Client Components
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log
Error Number : 29549
Error Description : MSP Error: 29549 Failed to install and configure assemblies c:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2146233087
Error message: Unknown error 0x80131501
Error description: MSDTC was unable to read its configuration information. (Exception from HRESULT: 0x8004D027)
----------------------------------------------------------------------------------
Product : MSXML 6.0 Parser
Product Version (Previous): 3883
Product Version (Final) : 6.10.1129.0
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_msxml6.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Backward Compatibility
Product Version (Previous): 1054
Product Version (Final) : 2004
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SQLServer2005_BC.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29549
We have to add some hardware and I was wondering if someone could provide a stepwise tip to do it .
It is a 3 Server Environment Pub/Dist/Sub
All three running under SQL2K
Here is what I am planning.
a. Uncheck the Enable in Distributed Agent for each replication
b. Wait for all replications to complete
c. Shut down Publisher ? Or do I have to do something else before that.
Please explain a little .
Thanks
Do you guys reboot your SQL 2005 servers at a set schedule? If so, how often are you rebooting the servers?
-A
I've just rebooting the db server and I've currently got 82 connections open to the server. vb6 apps connect fine but .Net apps are sruggling - sa is sql200 query analyzer. they can't get a connection to the server - it just hangs for ages. any idea?
View 2 Replies View RelatedHere is the block of the sproc that I?ve created. All lines executefine except for the ?exec master..xp_cmdshell @reboottc?. In order tomake this work from the query analyzer I had to set the MSSQLSERVERservice to have the same credentials as the thin clients we are tryingto shut down, that means the service is running as an Administrator onthe sql server with the same u/p as administrator on thin clients.declare @RoomNumber varchar(6) -- for testingset @RoomNumber = '1144' -- for testingDECLARE @RoomIP varchar(15), @RebootTCvarchar(120), @shutdownStart varchar(20), @shutdownEnd varchar(85)-- @ShutDownStart and @ShutDownEnd will be usedwith the @RoomIP to build the shutdown command sent to the thinclientsSET @ShutDownStart = 'shutdown -r -f -m \'SET @ShutDownEnd = ' -t 5 -c "MandatoryiConnect Reboot issued during guest check in/out process"'SELECT @RoomIP = IP FROM Rooms WHERERoomNumber = cast(@RoomNumber AS INT)SET @RebootTC = @ShutDownStart + @RoomIP +@ShutDownEnd-- print @RebootTC -- for testing-- @RebootTC ends up looking like the line below based on the@RoomNumber-- shutdown -r -f -m \172.18.16.103 -t 5 -c "Mandatory iConnectReboot issued during guest check in/out process?-- Also the command below runs correctly when executed from SQL QueryAnalyzerEXEC master..xp_cmdshell @RebootTC
View 1 Replies View RelatedAn IT dept. I have been consulting with has started to reboot SQL server every night. They are saying that this is the best practices. I would like to know if anyone has any other ideas on this subject. What is the best practices for how often a SQL server should be rebooted, daily, weekly, monthly ... ?
Thanks
I just installed SP2. I wanted to install the AdventureWorksDW database as part of the Database Engine Tuning Advisor tutorial. It said my install was not finished and I had a "pending reboot requirement." I shut down, and 8 different updates ran. When I tried to install the AdventureWorksDW database again, I got the same message. I'll see if there are still more updates to run.
View 10 Replies View RelatedIs it possible to convert a SQL2K datafile to SQL2K5? I have a 2K database that I need to easily convert to 2K5, I apprecaite any insight on this issue.
View 1 Replies View RelatedHello All:
From my previous post it seems that the general consensus is for me to use backup and Restore to upgrade a dB from SQL2K to SQL2K5.
Could anyone refer me to some explicit instructions for doing this?
I have SQL2K5 and SQL2K on separate servers and I cannot back the dB up to SQL2K5. I also can't access the drives for SQL2K from SQL2K5. I'm hoping it's a simple mistake.
Any advice or guidance is greatly appreciated.
Thanks,
Cleech
I am trying to create a Linked server between Access 97 and SQL2K5
provider=Microsoft.Jet.OLEDB.4.0
MDAC version installed on SQL server system is 2.8
with same configuration if i convert MDB file to Office 2000 then its working fine
Please advice
I want to copy a SQL2005 database to a SQL2000 environment? I created a backup from the DB in SQL2005 and moved the file to the other server but SQL2000 says the BAK file is invalid since the backup has structure version 611 while the server supports version 539. Any solution?
Canada DBA