I am looking for documentation/information on how to configure SQL7 so that I
can use SMTP for delivering e-mail.
I have other applications which use SMTP for delivering our e-mail.
I don't have Exchange. Internally we use GroupWise for our mail system.
Thanks in advance!!!
I can't seem to get mail generated by SQLMail to actually send.
Here is what I did.
1. Installed Outlook 2000 and configured it. I was able to send mail.
2. When into Enterprise Mgr and added the profile. It tests ok.
3. When into Query manager and did xp_sendmail 'rutherb2@nationwide.com','test'
4. Message says 'Mail sent', but nothing is sent..
However if I open Outlook and do a "Send and Receive" the mail gets sent.
My question is : Is this the way it is suppose to work? Do I have to have the Outlook client running on my server to get the mail to send?
What am I missing?
Thanks in advance....
!boB
How can I copy a SQL 7 database from one server to another? Please tell me all the ways because I've tried the obvious and it doesn't work. (backup and restore - won't go from one server to another, DTS transfer object Wizard - does a whole pile of errors and doesn't do stored proceedures and trigures). Thanks for help in advance. Also, what is the email address to post to the listserv and where is the FAQ for SQL7? Most of my listserv's tell you where to post right at the bottom of the digest I get - any chance you guys would do that with this list? Thanks again.
View 6 Replies View RelatedI have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies View RelatedI've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM
Log Database Mail (Database Mail Log)
Log ID 402
Process ID 3936
Last Modified 2/2/2007 8:35:00 AM
Last Modified By NT AUTHORITYSYSTEM
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Could not retrieve item from the queue.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
What step am I missing?
I am using nt4.0 sp5 with sql7.0 sp3 and exchange client.
Does anyone know how to keep xp_sendamil form putting a copy of the mail message in the sent mail folder or an automated process for deleting all mail in the sent folder? As it stands now I must manually delete all messages from the sent mail folder on a daily basis.
Thanks,
Ed.
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
Hello,
The Database Mail feature is already enabled on the server, also I have a mail account on the other server.
The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ?
Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account?
The mail should be sent from my SQL Server.
Thank You.
Hi all....
Our company use yahoo business mail server for our corporate mails. I know that I can configure database mail with SMTP. But when I try to configure database mail account with yahoo bizmail, I cannot do that. It gets configured but when I test it it doesn't send any mails. Do I need to have any special condiguration for this. SMTP address is smtp.bizmail.yahoo.com. Also I have specified the Authentication using my user name and password. Please help
Thanks
Rajesh
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
Hello
I have got a script which gives the mail to the dba mail box when database backup fails.
In the script I want to make a change so that I get the particular database name , on what ever database i implement.
Can you tell me some suggestions.
The script I am using is :
use master
go
alter PROCEDURE dbo.SendMail
@to VARCHAR(255),
@subject VARCHAR(255),
@message VARCHAR(8000)
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@rv INT,
@from VARCHAR(64),
@server VARCHAR(255);
SELECT
@from = 'testsql2000@is.depaul.edu',
@server = 'smtp.depaul.edu';
select @message = @message + char(13) + Char(13) + @@servername + '-'+ db_name()+ '-' + 'Backup Status Failed' + Char(13)
EXEC @rv = dbo.xp_smtp_sendmail
@to = @to,
@from = @from,
@message = @message,
@subject = @subject,
@server = @server;
END
GO
--- After the above script is run the following should be given in the 2nd step when
--- the backup jobs are scheduled ------
exec master.dbo.sendmail
@to = 'dvaddi@depaul.edu',
@subject =' Test sqlserver 2000',
@message = '' ;
Thanks
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
i have to create a scheduled task that does the following:
a) creates an Excel Spreadsheet from a SQL Query
b) sends the spreadsheet to a user
i then need to schedule this task so that it runs every day and creates a NEW spreadsheet (doesnt matter it the name is the same as long as it overwrite what is already there)
HELP me PLEASE i dont like this SQL Game anymore !!
Daniel.:mad: :confused:
Hi, I have created a profile named sqlmail in exchange server. I tried to run the sql mail service from support service under sql mail to put the profile name, I got the following error: can any one assist me in setting up sql mail in an sql server 2000. .... thanks
Ali
Microsoft SQL - DMO(ODBC SQLState: 42000)
Error 18025:xp_test_mapi_profile: failed with mail error 0x80004005
NOT ABLE TO SEND TEST MAIL FROM DB MAIL...The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 4 Replies View RelatedHi every body
I want to send a simple mail using DATABASE MAIL feature in SQL SERVER 2005.
I've defined a public profile.
I've enabled Database Mail stored procedures through the Surface Area Configuration .
but I can't send a mail with sp_send_dbmail stored procedure in 'msdb' database .
when I execute sp_send_dbmail in the Managment Studio the message is
"Mail queued" but the mail is not sent.
Could it be related to Service Broker?Because the Surface Area Configuration indicates:'this inctance does not have a Service Broker endpoint'.If so, how should I make an endpoint?
here is the log file after executing sp_send_dbmail:
1) "DatabaseMail process is started"
2) "The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2007-03-08T00:49:29). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it)."
The DatabaseMail90.exe is triggred ,so the mail is transfered to the mail queue but DatabaseMail90.exe couldn't give the mail to SMTP server.The promlem is what should I do to make DatabaseMail90.exe able to connect to the server?
please help me.
POUYAN
hello everybody.
I have server server1
sql server and agent and mail profiler
running using mydomainsvcsql
dts (test_dts)created by user domainalex
with "use windows athentication"
dts steps
1. exe sp_who2
2. send mail to joe
user domainjoe run
DTSRun /S server1 /E /N test_dts
with error
Error: -2147220352 (80040480); Provider Error: 0 (0) Error string: Logon failed: MapiLogonEx Failed due to MAPI error 273: MAPI Logon failed
what permisissions should be granted to
domainjoe
in order to run dts from DTSRun ?
Thank you
Hi.
I have problems with sending a mail from SQL Server:
SQL Mail starts.
Command: xp_sendmail 'MRudyk','Halo!'
returns:Unknown recipient: Parameter '@recipients', recipient 'Mrudyk'
'Mrudyk' is valid recipient...
NOT ABLE TO SEND TEST MAIL FROM DB MAIL///The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
View 3 Replies View RelatedI had a very recent problem where an excess number of mail records were queued. I ran sysmail_delete_mailitems_sp and deleted them from the InternalMailQueue, but it looks like they still exist in the ExternalMailQueue as I keep getting messages in the log similar to "Mail Id 2277459 has been deleted from sysmail_mailitems table. This mail will not be sent". The MailItem_Id keeps incrementing so it looks like it's working its way through. The problem is we can't use it to sent current mail until it gets through about another 3 million records.
If there is some way to delete those records from the External Mail Queue or fast-forward the system to the current records that would be very helpful. Any ideas?
John
Hello Everyone,
I am trying to configure SQL MAIL and SQL SERVER AGENT MAIL feature of SQL SERVER 2000 with Lotus Domino server (Not Microsoft Exchange). Every thing goes fine and it works also. Problem starts when I try to restart SQL Agent Service. It hangs and the status of service remain 'starting'...
Also the size of the sqlagent service process goes upto 12MB. I don't understand why? Can any one help me in solving this problem.
I am using Windows 2000 Advanced Server and SQL Server 2000 with SP3. Domino client is R5.0.5 and Outlook 2000.
Dear MSSQL Collegues;
I set up SQL mail to send mail using MS Mail Server off of a separate server. The mail works and the server does mail out
with the difference that I must physically click on the "check mail" for MS Messenger to send the mail out to the mail server.
I thought about installing MS Exchange (The one I have running on NT workstation) but I can not find the installation kit
for Exchange anywhere. I tried Microsoft but I can not find it. Is there a trick to installing Exchange out of the cd rom for
NT 4.0? Or is there a setting in Messenger that I have to set for it to send mail by itself?
I need help Please.
Thank you for your help
David E. Pierri
Pseudo SQL Admin
Does anyone know how to send email alert from SQL?
Thanks in advance.
Hi,
Can anyone please tell me the difference between Database Mail and SQL Mail.
Thanks in Advance
R.K.Nair
RKNAIR
I have been reading everything i can find regarding sql mail and sqlagent mail.We have a win2k server, sql 2000 and NO, NO, NO exchange server(all upto date on service packs).I have tried repeatadly for days to make this work, and have had noluck so far.1. I have a valid profile that tests fine in sql agent and via sqlmail test buttons.2. I have logged in to the box under that new domain account toinstall outlook and configure all the remaining options.3. I have set both the mssqlserver service and the sqlserveragentservice to run under the domain account that coincides with our pop3email server, and restarted both of them.4. I have installed outlook 2002, and I can send and receive emailsjust fine from our sql server.5. As soon as I try to test an email from within a job, the testfails.All I wanted to do was just be notified if a job fails. The amount oftime lost on what should have been a 30 minute project isunbelievable!!!If anyone has some suggestions, other than the obvious, please let meknow.Thanks,Dave
View 3 Replies View RelatedHi there,
After installing SP2 we encounter a problem with MMC. When selecting a DB we recieve a RunTime error? And the DB items/properties are not shown.
Is there anyone with the same problem and knows how to fix this? I search the MS site for more information but there is nothing on it.
Danny
Is MS SQL 7.0 have any difference/incompatibility problem with the BackOffice's SQL 7.0?
anybody can clarify this to me please... tq!
I have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil
To: sanderss@arsocdev.bdev.lab.mil
MessageSourceType: Direct Input
Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
Thanks
I am going to install SQL7.0 on the current NT4.0 with SQL6.5 on it by uninstalling SQL6.5 first and then installing (not upgrading through Wizard) SQL7.0.
Here are the questions I need help with:
1. Should I convert the database after the installation of SQL7.0 or directly restore the SQL6.5 databases backup?
2. If I need to convert the databases, How and in what way?
3. Which way is better upgrade or installation?
Thank you ahead of time
John
Current system 2 x 500mhz pIII 512MB ram, System mirrored and data raid 5 30GB made from 3 disks. All server is running in CA TNG. an Asset management DB and Software Delivery database. But the poor server runns most of the time at 100% 65% being used by SqlServer process. Does/Can anyone recommend any tweaks upgrades that may let the server take a breath in and out ie will more memory speed thing up faster processors or more disk.
Thanks
Nigel
Hi,
i'm brand new in the sql server world so maby this is an easy problem.
I have to get data from AS/400 to SQL7. I've created a package with a client acces odbc driver and an sql driver which transfers the data of an entire table. When i execute this it works fine.
Now i want to shedule this (shedule package). When i start this job it doesn't work.
This is the error i get:
DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147008507 (80074005) Error string: Unspecified error Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts.hlp Help context: 1100 Error Detail Records: Error: -2147008507 (80074005); Provider Error: 0 (0) Error string: Unspecified error Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts.hlp Help context: 1100 Error: -2147467259 (80004005); Provider Error: 5 (5) Error string: [IBM][Client Access ODBC Driver (32-bit)][DB2/400 SQL]Communication link failure. COMM RC=0x5 Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSDataPumpTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.
on the server i've installed client access as well and created the same odbc driver (with the same name). But it still doesn't work.
Can anybody help me please??