Is there a way to retreive the SQL Statement with the values from the parameters merged together? I know how to retreive the SQL Select Statement and the parameters separately but I need to retreive the final SQL.
For example:
SELECT name FROM employee WHERE id = @id
I would like to retreive from SQLDataSource
SELECT name FROM employee WHERE id = 1
Thank you
Hello all,
I have been working with a DetailsView control for the past week and it is a great control, but also lacks on some departments. Anyhow I need to know what the best approach for this scenerio would be?
I have a SqlDataSource"
<asp:SqlDataSource ID="SqlUpsertAffiliateDetails" runat="server" ConnectionString="<%$ ConnectionStrings:connectionstring %>"
SelectCommand="SELECT am.affiliate_id AS AffiliateId, am.member_id AS MemberId, m.First_Name, m.Last_Name, am.category_id AS CategoryId, ac.category_name, am.profile_web_address AS WebAddress, am.profile_email_1 AS Email, am.comments AS Comments, am.date_modified FROM tAffiliateMaster AS am WITH (NOLOCK) INNER JOIN tAffiliateCategories AS ac WITH (NOLOCK) ON am.category_id = ac.category_id INNER JOIN rapdata..Member AS m WITH (NOLOCK) ON am.member_id = m.Member_Number WHERE (am.affiliate_id = @AffiliateId)"
UpdateCommand="spUpsertAffiliateProfile" UpdateCommandType="StoredProcedure">
<SelectParameters>
<asp:QueryStringParameter Name="AffiliateId" QueryStringField="affiliate_id" />
</SelectParameters>
<UpdateParameters>
<asp:Parameter Name="Action" Type="Byte" DefaultValue="2" />
</UpdateParameters>
</asp:SqlDataSource>
And my SP:/* 09-19-07 Used to update affiliate profile */
CREATE PROCEDURE spUpsertAffiliateProfile
@Action tinyint,
@AffiliateId int,
@MemberId int = -1,
@CategoryId int,
@WebAddress varchar(50),
@Email varchar(50),
@Comments varchar(1500)
AS
SET NOCOUNT ON
-- Find errors first, check is not needed if deleting
IF @Action <> 3
IF NOT EXISTS (SELECT Member_Number FROM rapdata..Member_Association WHERE Member_Number = @MemberId AND Status = 'A' AND Association_ID = 'TRI' AND Bill_Type_Code LIKE '%AF%')
BEGIN
SELECT retval = 'A qualified member ID was NOT found. Action Failed.', errorcount = 1, 0 AS affiliate_id
RETURN
END
IF @Action = 1
IF EXISTS (SELECT member_id FROM tAffiliateMaster WHERE member_id = @MemberId)
BEGIN
SELECT retval = 'This member has already been listed. Action Failed.', errorcount = 1, 0 AS affiliate_id
RETURN
END
IF @Action = 1 AND @AffiliateId = 0-- insert
BEGIN
INSERT INTO tAffiliateMaster
(member_id, category_id, profile_web_address, profile_email_1, comments)
VALUES
(@MemberId, @CategoryId, @WebAddress, @Email, @Comments)
SELECT retval = 'Record Entered', errorcount = 0, @@IDENTITY AS affiliate_id
RETURN
END
ELSE IF @Action = 2 AND @AffiliateId > 0-- update
BEGIN
UPDATE
tAffiliateMaster
SET
category_id= @CategoryId,
profile_web_address=@WebAddress,
profile_email_1=@Email,
comments=@Comments
WHERE
affiliate_id = @AffiliateId AND member_id = @MemberId
SELECT retval = 'Record Updated', errorcount = 0, @AffiliateId AS affiliate_id
RETURN
END
ELSE IF @Action = 3 AND @AffiliateId > 0-- delete
BEGIN
DELETE
tAffiliateMaster
WHERE
affiliate_id = @AffiliateId
SELECT retval = 'Record Deleted', errorcount = 0, 0 AS affiliate_id
RETURN
END
GO
My question is how will I be able to return the retval? Will I need to do it within the code behind of the SqlDataSource Updated Event?
Thanks!
I am using ASP.NET 3.5 with SQLDataSource, when a record is inserted is there a way to retreive the newly created GUID value in a field?
I am currently using SELECT @NewID = SCOPE_IDENTITY() to retreive the newly created record unique ID field, but I need the secondary field GUID field's value instead in this case.
Thank you.
I'm having trouble using session data in my select parameters. If I manually plug a value into the selectcommand or create a hard coded value using a parameter it works, but if I try to use the session data the query pulls no results. I know the session data is set because I print the value at the top of the page, but for some reason it's not getting passed to the sessionparameter???
This is the datasource code:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:flautoconnstr %>"
SelectCommand="SELECT * FROM [tblVehicles] WHERE ([profileid] = @profileid)">
<SelectParameters>
<asp:SessionParameter Name="profileid" SessionField="profileid" Type="String" />
</SelectParameters>
</asp:SqlDataSource>
This is the line I use to set the session data.
Session["profileid"] = myQuote.Profileid;
Hi all,I drag sqldatasource to my form, and then adding a button there. I want when clicking the button to be able to use the sqldatasource1.select statement . I found some parameters that this method used but still dont know how to figure it out, which was IEnumerable Select (DataSourceSelectArguments a)for example when the button it clicked I want to perform the select * from employee Thanks
View 1 Replies View RelatedI have multiple SqlDataSources on a page. I only want them to execute the select query when the user performs a certain action. Is this possible? Or do they all execute as soon as the page is loaded?
View 1 Replies View RelatedOk I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
Hi Everyone,
I am trying to change the select statement of an sqldatasource if a check box is checked.
I am using the SqlDataSourceSelectingEventArgs but i can't get it to work, anyone got any pointers?
Code BehindProtected Sub LocMan_Searching(ByVal sender As Object, ByVal e As SqlDataSourceSelectingEventArgs) Handles LocManSearch.Selecting
If cb_Today.Checked = True ThenLocManSearch.SelectCommand = "SELECT * FROM [LocMan_CV] WHERE ([area] LIKE '%' + " & dd_Area.SelectedValue.ToString() & "+ '%') AND [available] LIKE '%' + " & Date.Today & "+ '%')"
Else : LocManSearch.SelectCommand = "SELECT * FROM [LocMan_CV] WHERE ([area] LIKE '%' + " & dd_Area.SelectedValue.ToString() & " + '%')"
End If
End Sub
My SQLDATSOURCE
<asp:SqlDataSource ID="LocManSearch" runat="server" ConnectionString="<%$ ConnectionStrings:MYLOCDEVConnectionString %>" >
<SelectParameters>
<asp:ControlParameter ControlID="dd_Area" Name="area" PropertyName="SelectedValue"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
Thanks in advance
Chris
I wish to dynamically assign Select Statement to SqlDataSource. Anyone has any idea?? Is it possiable at all?
I am coding using C# under Framwork 2.0
How can i assign select statement to a sqldatasource
I mean if the user clicks button 1
sqldatasource=-"select * from customers where status='ClOSED' "
or else if the user clicks button2
sqldatasource="Select * from Customers Where Status='OPEN' "
I want to bind the sqldatasource to a gridview finally .
Is this possible ?
I tried sqldatasource filters But am reallly confused
Any suggestions/solutions are appreciated
thankyou
Hi you all,
In abc.aspx, I use a GridView and a SqlDataSource with a SelectCommand. The GridView's DataSourceID is the SqlDataSource.
In abc.aspx.cs, I would like to use an IF statement in which if a criterion is not satistied then I will use the SqlDataSource with another SelectCommand string. Unfortunately, I have yet to know how to write code lines in order to do that with the SqlDataSource. Plz help me out!
hello all, im trying to run a select statement using a parameter, but am having extreme difficulties. I have tried this about 50 different ways but i will only post the most recent cause i think that im the closest now than ever before ! i would love any help i can get !!!
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
Dim pageID As StringpageID = Request.QueryString("ID")
TextBox13.Text = pageID 'Test to make sure the value was stored
SqlDataSource1.SelectParameters.Add("@pageID", pageID)
End Sub
....
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ProviderName=System.Data.SqlClient ConnectionString="Data Source=.SQLEXPRESS;Initial Catalog=software;Integrated Security=True;User=something;Password=something" 'SelectCommand="SELECT * FROM Table1 WHERE [ClientID]='@pageID' ></asp:SqlDataSource>
The error that i am getting, regardless of what i put inside the ' ' is as follows:
"Conversion failed when converting the varchar value '@pageID' to data type int."
anyone have any suggestions ?
Trying to insert into a history table. Some columns will come fromparameters sent to the store procedure. Other columns will be filledwith a separate select statement. I've tried storing the select returnin a cursor, tried setting the values for each field with a separateselect. Think I've just got the syntax wrong. Here's one of myattempts:use ESBAOffsetsgoif exists(select * from sysobjects where name='InsertOffsetHistory' andtype='P')drop procedure InsertOffsetHistorygocreate procedure dbo.InsertOffsetHistory@RECIDint,@LOB int,@PRODUCT int,@ITEM_DESC varchar(100),@AWARD_DATE datetime,@CONTRACT_VALUE float,@PROG_CONT_STATUS int,@CONTRACT_NUMBER varchar(25),@WA_OD varchar(9),@CURR_OFFSET_OBL float,@DIRECT_OBL float,@INDIRECT_OBL float,@APPROVED_DIRECT float,@APPROVED_INDIRECT float,@CREDITS_INPROC_DIRECT float,@CURR_INPROC_INDIRECT float,@OBLIGATION_REMARKS varchar(5000),@TRANSACTION_DATE datetime,@AUTH_USERvarchar(150),@AUTHUSER_LNAMEvarchar(150)asdeclare@idintinsert into ESBAOffsets..HISTORY(RECID,COID,SITEID,LOB,COUNTRY,PRODUCT,ITEM_DESC,AWARD_DATE,CONTRACT_VALUE,PROG_CONT_STATUS,CONTRACT_TYPE,FUNDING_TYPE,CONTRACT_NUMBER,WA_OD,PM,AGREEMENT_NUMBER,CURR_OFFSET_OBL,DIRECT_OBL,INDIRECT_OBL,APPROVED_DIRECT,APPROVED_INDIRECT,CREDITS_INPROC_DIRECT,CURR_INPROC_INDIRECT,PERF_PERIOD,REQ_COMP_DATE,PERF_MILESTONE,TYPE_PENALTY,PERF_GUARANTEE,PENALTY_RATE,STARTING_PENALTY,PENALTY_EXCEPTION,CORP_GUARANTEE,BANK,RISK,REMARKS,OBLIGATION_REMARKS,MILESTONE_REMARKS,NONSTANDARD_REMARKS,TRANSACTION_DATE,STATUS,AUTH_USER,PMLNAME,EXLD_PROJ,COMPLDATE,AUTHUSER_LNAME)values(@RECID,(Select COID from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select SITEID from ESBAOffsets..Offsets_Master where RECID = @RECID),@LOB,(Select COUNTRY from ESBAOffsets..Offsets_Master where RECID =@RECID),@PRODUCT,@ITEM_DESC,@AWARD_DATE,@CONTRACT_VALUE,@PROG_CONT_STATUS,(Select CONTRACT_TYPE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select FUNDING_TYPE from ESBAOffsets..Offsets_Master where RECID =@RECID),@CONTRACT_NUMBER,@WA_OD,(Select PM from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select AGREEMENT_NUMBER from ESBAOffsets..Offsets_Master where RECID= @RECID),@CURR_OFFSET_OBL,@DIRECT_OBL,@INDIRECT_OBL,@APPROVED_DIRECT,@APPROVED_INDIRECT,@CREDITS_INPROC_DIRECT,@CURR_INPROC_INDIRECT,(Select PERF_PERIOD from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select REQ_COMP_DATE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select PERF_MILESTONE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select TYPE_PENALTY from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select PERF_GUARANTEE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select PENALTY_RATE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select STARTING_PENALTY from ESBAOffsets..Offsets_Master where RECID= @RECID),(Select PENALTY_EXCEPTION from ESBAOffsets..Offsets_Master where RECID= @RECID),(Select CORP_GUARANTEE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select BANK from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select RISK from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select REMARKS from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select OBLIGATION_REMARKS from ESBAOffsets..Offsets_Master whereRECID = @RECID),@MILESTONE_REMARKS,@NONSTANDARD_REMARKS,@TRANSACTION_DATE,(Select STATUS from ESBAOffsets..Offsets_Master where RECID = @RECID),@AUTH_USER,(Select PMLNAME from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select EXLD_PROJ from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select COMPLDATE from ESBAOffsets..Offsets_Master where RECID =@RECID),@AUTHUSER_LNAME)select@@identity idgogrant execute on InsertOffsetHistory to publicgo
View 1 Replies View RelatedHi to allI wish to be able to have a standard select statement which hasadditional fields added to it at run-time based on suppliedparameter(s).iedeclare @theTest1 nvarchar(10)set @theTest1='TRUE'declare @theTest2 nvarchar(10)set @theTest2='TRUE'selectp_full_nameif @theTest1='TRUE'BEGINother field1,ENDif @theTest2='TRUE'BEGINother field2ENDfrom dbo.tbl_GIS_personwhere record_id < 20I do not wish to use an IF statement to test the parameter for acondition and then repeat the entire select statement particularly asit is a UNIONed query for three different statementiedeclare @theTest1 nvarchar(10)set @theTest1='TRUE'declare @theTest2 nvarchar(10)set @theTest2='TRUE'if @theTest1='TRUE' AND @theTest2='TRUE'BEGINselectp_full_name,other field1,other field2from dbo.tbl_GIS_personwhere record_id < 20ENDif @theTest1='TRUE' AND @theTest2='FALSE'BEGINselectp_full_name,other field1from dbo.tbl_GIS_personwhere record_id < 20END......if @theTest<>'TRUE'BEGINselectp_full_namefrom dbo.tbl_GIS_personwhere record_id < 20ENDMake sense? So the select is standard in the most part but with smallvariations depending on the user's choice. I want to avoid risk ofbreakage by having only one spot that the FROM, JOIN and WHEREstatements need to be defined.The query will end up being used in an XML template query.Any help would be much appreciatedRegardsGIS Analyst
View 2 Replies View RelatedI have a user login scenario where I would like to make sure that they not only exist in the user table, but also make sure there account is "verified" and "active". I'm trying to return 3 output parameters. UserID, verified, active. Is this possible?
Do I need just a select statement to do this? What is the difference between the output and select statements?
Thanks in advance.
I have a table which has 4 fields, patientid,testdate,testtype,results.
I want to select the most recent testdate by a patient regardless
of the results, or the testtype. I do however need those fields for my query.
I tried the below, but I get more than 1 record if the person has had two different types of tests. For instance if patient 100 has the following 2 records I just want the most recent
patientid testdate testype results
100 01/02/2002 TBI ASYMP
100 02/02/2001 PPD 00000
select max(testdate)as testdate,testtype, other_id_number
from vw_cms_tb_lasttest
What am missing?
Thanks
group by other_id_number,testtype
order by other_id_number,testtype
I am running a select statement against a function that is giving me different values depending on how it is called. When I run it through sql server management studio, I get the proper results, the default value column has the parameters default value. When I call it through my web app, I get this in the default value column:
*** ERROR OCCURRED level 2 (this is not a default value) ***
Why would the same sql statement get different results?
Here is the call:
select * from dbo.f_GetSProcParameters('webservices_BENEFICIAL_USES_DM_SELECT')
Here are the two functions:
---------------------------------------------------
USE [si_training_db]
GO
/****** Object: UserDefinedFunction [dbo].[f_GetSProcParameters] Script Date: 06/13/2008 09:29:21 ******/
SET ANSI_NULLS OFF
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER function [dbo].[f_GetSProcParameters](@StoredProcedureName VARCHAR(128) )
Returns @sProcParameters Table(ParmName VarChar(128),
DefaultValue VarChar(128),
HasDefault Bit,
IsInput Bit)
/*
* DESCRIPTION : This function returns a table listing all the parameters of a stored
*procedure and the default values of those parameters.
*
* RETURNS : table
*
*
* ORIG AUTHOR : Josh Kinder
* DATE WRITTEN : 3/14/2006
*
* REVISIONS LOG
*
*ID/Date PC# Description
*------- --- ----------------------------------------------------------
*/
As
Begin
Declare
@Count SmallInt,
@Index SmallInt,
@CurParm VarChar(128),
@DefaultVal VarChar(128),
@IsInput BIT
/*----------------------------------------------------------------------------------------------------------------------------------*/
--EDIT CHECK -sProc only
/*----------------------------------------------------------------------------------------------------------------------------------*/
-- Check that the proc name is valid
If OBJECT_ID(@StoredProcedureName, 'P') Is Null
Begin
Goto ScriptErr
End
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
Declare @ParmTable Table (Id SmallInt Identity Primary Key Clustered, ParmName VarChar(128))
Insert Into @ParmTable
Select
a.Name
From
SysColumns a
Inner Join SysObjects b On b.Id = a.Id
Where
b.Name = @StoredProcedureName
Select
@Count = Count(Id),
@Index = 1
From
@ParmTable
While (@Index<=@Count)
Begin
Select @CurParm = ParmName From @ParmTable Where Id = @Index
Set @DefaultVal = dbo.f_GetsProcParamDefaultValue(@StoredProcedureName,
@CurParm)
SELECT@IsInput = CASE WHEN params.is_output = 1 THEN 0 ELSE 1 END
FROMsys.procedures AS procs
INNER JOINsys.all_parameters AS params ON params.object_id = procs.object_id
LEFT JOINsys.types AS types ON types.system_type_id = params.system_type_id
AND types.user_type_id = params.user_type_id
WHEREprocs.is_ms_shipped = 0
AND params.name = @CurParm
AND procs.name = @StoredProcedureName
Insert Into @sProcParameters
(
ParmName,
DefaultValue,
HasDefault,
IsInput
)
Values
(
@CurParm,
@DefaultVal,
Case When @DefaultVal = 'NoDefaultExists' Then 0 Else 1 End,
@IsInput
)
Set @Index = @Index + 1
End
ScriptErr:
Return
End
---------------------------------------------------
USE [si_training_db]
GO
/****** Object: UserDefinedFunction [dbo].[f_GetsProcParamDefaultValue] Script Date: 06/13/2008 09:30:07 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER function [dbo].[f_GetsProcParamDefaultValue]
(
@StoredProcedureName VarChar(128),
@ParamName VarChar(128)
)
ReturnsVarChar(128)
/*
* DESCRIPTION : This function returns a table listing all the parameters of a stored
*procedure and the default values of those parameters.
*
The following copyright info is for the parsing algorithm to get the default value.
I obtained the code from SQL Farms Solutions and their only stipulation for use is
that the copyright info remain with the code. Although I customized it for us, it is
still their algorithm.
==================================================================================
Copyright © SQL Farms Solutions, www.sqlfarms.com. All rights reserved.
This code may be used at no charge as long as this copyright notice is not removed.
==================================================================================
* RETURNS : table
*
*
* ORIG AUTHOR : Josh Kinder
* DATE WRITTEN : 3/14/2006
*
* REVISIONS LOG
*
*ID/Date PC# Description
*------- --- ----------------------------------------------------------
*/
As
Begin
Declare
@minRow Int,
@maxRow Int,
@tmpInt Int,
@tmpText VarChar(4000),
@tmpCharPos1 Int,
@tmpCharPos2 Int,
@tmpCharPos3 Int,
@ParameterDefault VarChar(128),
@sProcTextVarChar(4000),
@DelimiterChar(1),
@Count SmallInt,
@Index SmallInt,
@CurTextVarChar(4000)
Select
@minRow = Null,
@maxRow = Null,
@Delimiter = char(13)
Declare @ProcText Table (Id Int Identity(1, 1) Primary Key Clustered,
ProcText VarChar(4000))
Insert Into @ProcText
Select
a.Text
From
SysComments a
Inner Join SysObjects b On b.Id = a.Id
Where
b.Name = @StoredProcedureName
Select
@Count = Count(Id),
@Index = 1
From
@ProcText
While (@Index<=@Count)
Begin
Select @CurText = Coalesce(@CurText,'') + ProcText From @ProcText Where Id = @Index
Set @Index = @Index + 1
End
/*----------------------------------------------------------------------------------------------------------------------------------*/
--EDIT CHECKS
/*----------------------------------------------------------------------------------------------------------------------------------*/
-- Check that the parameter name is valid for the proc
If Not Exists(
Select
1
From
INFORMATION_SCHEMA.PARAMETERS
Where
SPECIFIC_NAME = @StoredProcedureName
And PARAMETER_NAME = @ParamName
)
Begin
Set @ParameterDefault = '*** ERROR OCCURRED level 1 (this is not a default value) ***'
Goto ScriptErr
End
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
--Get sProc into a workable temporary table
/*----------------------------------------------------------------------------------------------------------------------------------*/
Declare @ProcContent Table (Idx Int Identity(1, 1) Primary Key Clustered,
ProcText VarChar(4000))
Insert Into @ProcContent
Select Value From dbo.f_Split(@CurText, @Delimiter, 1, 0)
-- Make sure that some rows were returned successfully
If @@ROWCOUNT = 0
Begin
Set @ParameterDefault = '*** ERROR OCCURRED level 2 (this is not a default value) ***'
Goto ScriptErr
End
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
--Get location of parm and get ready to parse
/*----------------------------------------------------------------------------------------------------------------------------------*/
-- Get the first line where the parameter is referenced in the proc code.
-- (the LIKE here is a little complex since it is possible that multiple parameters
-- will start with the same string. Most cases of interest are covered by the
-- conditions listed below).
Select
@minRow = Min(Idx)
From
@ProcContent
Where
ProcText Like '%' + @ParamName + ' %'
Or ProcText Like '%' + @ParamName + Char(9) + '%'
Or ProcText Like '%' + @ParamName + Char(10) + '%'
Or ProcText Like '%' + @ParamName + Char(13) + '%'
Or ProcText Like '%' + @ParamName + '=%'
Or ProcText Like '%' + @ParamName + '%=%'
Or ProcText Like '%' + @ParamName + ',%'
-- Check that the parameter is referenced in the code
If @minRow Is Null
Begin
Set @ParameterDefault = '*** ERROR OCCURRED level 3 (this is not a default value) ***'
Goto ScriptErr
End
-- Get the proc line where the word 'AS' is declared. 'AS' is required
-- upon proc creation to complete the variable declaration.
-- Note: This cover most cases of interest. There could be scenarios where
-- additional condition should be applied.
Select
@maxRow = Min(Idx)
From
@ProcContent
Where
ProcText Like '% AS'
Or ProcText Like '% AS '
Or ProcText Like '% AS' + Char(9)
Or ProcText Like '% AS' + Char(10)
Or ProcText Like '% AS' + Char(13)
Or ProcText Like 'AS %'
Or Upper(RTrim(LTrim(ProcText))) = Char(10) + 'AS'
Or Upper(RTrim(LTrim(ProcText))) = 'AS'
Or Upper(RTrim(LTrim(ProcText))) = 'AS' + Char(10)
Or Upper(RTrim(LTrim(ProcText))) = 'AS' + Char(13)
Or Upper(RTrim(LTrim(ProcText))) = 'AS' + Char(13) + Char(10)
Or Upper(RTrim(LTrim(ProcText))) = 'AS' + Char(10) + Char(13)
-- Check that the 'AS' string was found successfully
If @maxRow Is Null
Begin
Set @ParameterDefault = '*** ERROR OCCURRED level 4 (this is not a default value) ***'
Goto ScriptErr
End
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
--Parse and get the default value
/*----------------------------------------------------------------------------------------------------------------------------------*/
-- Get the first proc line of code where the parameter is referenced, for string processing,
-- and append to it all proc rows until the 'AS' string
Select
@tmpText = LTrim(RTrim(Replace(Replace(ProcText, Char(10), ''), Char(13), ''))) + ' '
From
@ProcContent
Where
Idx = @minRow
While @minRow < @maxRow
Begin
Set @minRow = @minRow + 1
Select
@tmpText = @tmpText + ' ' + LTrim(RTrim(Replace(Replace(ProcText, Char(10), ''), Char(13), ''))) + ' '
From
@ProcContent
Where
Idx = @minRow
End
-- Find the position of the parameter name. Delete all text before that position.
Set @tmpInt = Null
Set @tmpInt = PatIndex('%' + @ParamName + '%', @tmpText) - 1
Set @tmpText = Right(@tmpText, Len(@tmpText) - @tmpInt)
-- At this point we are nearly done:
-- We check whether the character '=' comes before the 'AS' or ',' string
-- If not- the parameter has no default value.
-- If so, we continue to find the value of the default parameter
Set @tmpCharPos1 = PatIndex('%=%', @tmpText)
Set @tmpCharPos2 = PatIndex('%,%', @tmpText)
Set @tmpCharPos3 = PatIndex('% AS %', @tmpText)
If @tmpCharPos1 <= 0
Or (@tmpCharPos1 > @tmpCharPos2 And @tmpCharPos2 > 0)
Or (@tmpCharPos1 > @tmpCharPos3 AND @tmpCharPos3 > 0)
Begin
-- The column does not have a default
Set @ParameterDefault = 'NoDefaultExists'
End
Else
Begin
-- Column has a default and it is left to find it.
-- First chop the string until the '=' character
Set @tmpInt = NULL
Set @tmpInt = PatIndex('%=%', @tmpText) - 1
Set @tmpText = LTrim(Right(@tmpText, Len(@tmpText) - @tmpInt))
-- Now, we p*** the remaining string until we get a ',' or a ' ' character
Set @tmpCharPos1 = NULL
Set @tmpCharPos2 = NULL
Set @tmpCharPos1 = PatIndex('%,%', @tmpText)
Set @tmpCharPos2 = PatIndex('% %', @tmpText)
Set @tmpInt = NULL
If @tmpCharPos2 > @tmpCharPos1 AND @tmpCharPos1 > 0
Set @tmpInt = @tmpCharPos1 - 1
Else
Set @tmpInt = @tmpCharPos2 - 1
If @tmpInt <= 0
Begin
Set @ParameterDefault = '*** ERROR OCCURRED level 5 (this is not a default value) ***'
Goto ScriptErr
End
Set @ParameterDefault = SubString(@tmpText, 1, @tmpInt)
-- If the parameter default is a string, then we will have an '' at each side of it.
-- These last lines of code will get rid of the ''.
If Len(@ParameterDefault) >= 1
If Right(@ParameterDefault, 1) = ''''
Set @ParameterDefault = Left(@ParameterDefault, Len(@ParameterDefault) - 1)
If Len(@ParameterDefault) >= 1
If Left(@ParameterDefault, 1) = ''''
Set @ParameterDefault = Right(@ParameterDefault, Len(@ParameterDefault) - 1)
End
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
Goto ScriptExit
ScriptErr:
ScriptExit:
Return @ParameterDefault
End
I have a table which has a field called Org. This field can be segmented from one to five segments based on a user defined delimiter and user defined segment length. Another table contains one row of data with the user defined delimiter and the start and length of each segment. e.g.
Table 1
Org
aaa:aaa:aa
aaa:aaa:ab
aaa:aab:aa
Table 2
delim
Seg1Start
Seg1Len
Seg2Start
Seg2Len
Seg3Start
Seg3Len
:
1
3
5
3
9
2
My objective is to use SSIS and derive three columns from the one column in Table 1 based on the positions defined in Table 2. Table 2 is a single row table. I thought perhaps I could use the substring function and nest the select statement in place of the parameters in the derived column data flow. I don't seem to be able to get this to work.
Any ideas? Can this be done in SSIS?
I'd really appreciate any insight that anyone might have.
Regards,
Bill
Hi,
I have SQL database 2000 which has one table Sheet1, I retrieved the columns in the ListBox, then chosed some of them and moved it to ListBox2.
The past scenario worked great, and I checked the moved values, it was succesfully moved, but when I tried to copy the values in ArrayList to do a select statement it didn't worked at all.
public string str;protected void Button3_Click(object sender, EventArgs e)
{ArrayList itemsSelected = new ArrayList(); string sep = ",";
//string str;for (int i = 0; i < ListBox2.Items.Count; i++)
{if (ListBox2.Items[i].Selected)
{
itemsSelected.Add(ListBox2.Items[i].Value);
}
int itemsSelCount = itemsSelected.Count; // integer variable which holds the count of the selected items.
str = ListBox2.Items[i].Value + sep;
Response.Write(str);
}
SqlConnection SqlCon = new SqlConnection("Data Source=AJ-166DCCD87;Initial Catalog=stat_rpt;Integrated Security=True;Pooling=False");
String SQL1 = "SELECT " + str + " from Sheet1"; SqlDataAdapter Adptr = new SqlDataAdapter(SQL1, SqlCon);
SqlCommandBuilder CB = new SqlCommandBuilder(Adptr);DataTable Dt = new DataTable();
Adptr.Fill(Dt);
//return Dt;
GridView1.DataBind();
SqlCon.Close();
}
I did some changes and the new error message is
Incorrect syntax near the keyword 'from'.
Thank you
Hi.
I have an sql table which contains a number and a name. I would like to create a select statement that will display these two fields in the format :
"number | name", but if there is a null value in the number it will display only the name and vice versa.
How can I do it ?
Any help is appreciated.
I would like to write a select statement where I specify a list of values in the 'Select' line, and would like the output to have one line for each element.
I tried using Case with no success.
For example:
Select a.id, a.timestamp, ('rowA','rowB') as 'Tag' from tableOne a where a.id = '1'
So the 'where' line would produce one row, however, the overall statement would produce two.
ID TimeStamp Tag
--------------------------------
1 2012-12-12 rowA
1 2012-12-12 rowB
I have an SQL Select statement that I need to add a column to called SalePrice, the SalePrice column needs to be calculated by adding together the values of 12 columns, then multiplying that value by the value in a another column to calculate margin. My issue is that I can only get it to add 7 column values together, if I add any more columns to the equation it just returns and null result. My DB is SQL 2005 Express SP2. My select statement is below: SELECT dbo.MFG_DATA_Machines.ID, dbo.MFG_DATA_Machines.MachineName, dbo.MFG_DATA_Parts_CPU.PartDescription AS CPU,
dbo.MFG_DATA_Parts_CPU.PartCost AS CPUCost, dbo.MFG_DATA_Parts_Motherboard.PartDescription AS Motherboard,
dbo.MFG_DATA_Parts_Motherboard.PartCost AS MotherboardCost, dbo.MFG_DATA_Parts_RAM.PartDescription AS RAM,
dbo.MFG_DATA_Parts_RAM.PartCost AS RAMCost, dbo.MFG_DATA_Parts_HDD.PartDescription AS HDD,
dbo.MFG_DATA_Parts_HDD.PartCost AS HDDCost, dbo.MFG_DATA_Parts_OpticalDrive.PartDescription AS OpticalDrive,
dbo.MFG_DATA_Parts_OpticalDrive.PartCost AS OpticalDriveCost, dbo.MFG_DATA_Parts_Video.PartDescription AS Video,
dbo.MFG_DATA_Parts_Video.PartCost AS VideoCost, dbo.MFG_DATA_Parts_OS.PartDescription AS OS, dbo.MFG_DATA_Parts_OS.PartCost AS OSCost,
dbo.MFG_DATA_Parts_Modem.PartDescription AS Modem, dbo.MFG_DATA_Parts_Modem.PartCost AS ModemCost,
dbo.MFG_DATA_Parts_FloppyDrive.PartDescription AS FloppyDrive, dbo.MFG_DATA_Parts_FloppyDrive.PartCost AS FloppyDriveCost,
dbo.MFG_DATA_Parts_CardReader.PartDescription AS CardReader, dbo.MFG_DATA_Parts_CardReader.PartCost AS CardReaderCost,
dbo.MFG_DATA_Parts_PowerSupply.PartDescription AS PowerSupply, dbo.MFG_DATA_Parts_PowerSupply.PartCost AS PowerSupplyCost,
dbo.MFG_DATA_Parts_CaseType.PartDescription AS CaseType, dbo.MFG_DATA_Parts_CaseType.PartCost AS CaseTypeCost,
dbo.MFG_DATA_Machines.Notes, dbo.MFG_DATA_Machines.MarginPercent, dbo.MFG_DATA_Machines.PriceOverride,
(dbo.MFG_DATA_Parts_CPU.PartCost + dbo.MFG_DATA_Parts_Motherboard.PartCost + dbo.MFG_DATA_Parts_RAM.PartCost + dbo.MFG_DATA_Parts_HDD.PartCost
+ dbo.MFG_DATA_Parts_OpticalDrive.PartCost + dbo.MFG_DATA_Parts_Video.PartCost + dbo.MFG_DATA_Parts_OS.PartCost + dbo.MFG_DATA_Parts_Modem.PartCost
+ dbo.MFG_DATA_Parts_FloppyDrive.PartCost + dbo.MFG_DATA_Parts_CardReader.PartCost + dbo.MFG_DATA_Parts_PowerSupply.PartCost + dbo.MFG_DATA_Parts_CaseType.PartCost)
* ((dbo.MFG_DATA_Machines.MarginPercent + 100) / 100) AS SalePrice
FROM dbo.MFG_DATA_Machines LEFT OUTER JOIN
dbo.MFG_DATA_Parts_CaseType ON dbo.MFG_DATA_Machines.CaseType = dbo.MFG_DATA_Parts_CaseType.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_Motherboard ON dbo.MFG_DATA_Machines.Motherboard = dbo.MFG_DATA_Parts_Motherboard.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_Video ON dbo.MFG_DATA_Machines.Video = dbo.MFG_DATA_Parts_Video.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_RAM ON dbo.MFG_DATA_Machines.RAM = dbo.MFG_DATA_Parts_RAM.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_PowerSupply ON dbo.MFG_DATA_Machines.PowerSupply = dbo.MFG_DATA_Parts_PowerSupply.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_OS ON dbo.MFG_DATA_Machines.OS = dbo.MFG_DATA_Parts_OS.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_OpticalDrive ON dbo.MFG_DATA_Machines.OpticalDrive = dbo.MFG_DATA_Parts_OpticalDrive.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_Modem ON dbo.MFG_DATA_Machines.Modem = dbo.MFG_DATA_Parts_Modem.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_HDD ON dbo.MFG_DATA_Machines.HardDisk = dbo.MFG_DATA_Parts_HDD.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_FloppyDrive ON dbo.MFG_DATA_Machines.FloppyDrive = dbo.MFG_DATA_Parts_FloppyDrive.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_CPU ON dbo.MFG_DATA_Machines.CPU = dbo.MFG_DATA_Parts_CPU.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_CardReader ON dbo.MFG_DATA_Machines.CardReader = dbo.MFG_DATA_Parts_CardReader.ID
I'm puzzled as to how to express what I want in a stored procedure. Assume two columns, Surname and GivenName. The surname might be missing. When I originally wrote this app in Access, I used the following expression:
SELECT Iif( IsNull(Surname), GivenName, Surname + ", " + GivenName ) AS Agent
FROM Agents;
I've looked at the syntax for CASE but I can't figure out exactly how to say what I intend, particularly the AS Agent column aliasing.
Any help greatly appreciated. Please cc me privately so I receive your assistance at once!
TIA,
Arthur
hi,
my sample SQL Server DB Tables are like,
SID Skill
--- -------
1 JAVA
2 ORACLE
3 C
4 C++
PID Skillset
--- ---------
1 1,2,3
2 2,4
3 1,2,3,4
4 3
I need the Query to display Person skills as follows...
PID Skillset
--- --------------
1 Java,Oracle,C
2 Oracle,C++
3 Java,Oracle,C,C++
4 C
and another query for Search..
if i give the search string as Java,C or i will pass the SID 1,3. i need to diplay the person records which contains the SID.
output will be...
PID Skillset
--- --------------
1 Java,Oracle,C
3 Java,Oracle,C,C++
4 C
or
PID Skillset
--- ---------
1 1,2,3
3 1,2,3,4
4 3
Plz help meee..
Thanking you in advance for your help.
Hello,
This may be a strange request, but I am going to ask about it anyways.
Say for example if I have a table named TEST and in the table there is a column named NUMBERS, such that it is like this:
NUMBERS
1
2
3
4
How could I use a select statement in a way that a comma would seperate every return value, such that if I go 'Select NUMBERS from TEST' I would get:
1,2,3,4
Instead of:
1
2
3
4
Any ideas?
Thanks
Hi,
I have a table called emp, having 2 field name & sex
values are:
name sex
a 1
b 2
c 1
now i want to display the values in above table as like below...
name sex
a Male
b Female
c Male
How to do that...?
Hi,
I got a really simple question here. Say I have a table with
ID, Name
1, A1
2, A2
3, A3
....
10, A10
Now I want to combine the names into another table grouped by their ID (say 1-5, 6-10), so this new table has two names instead of 10:
A1 A2 A3 A4 A5
A6 A7 A8 A9 A10
Is there a function that allows me to 'combine' the names from a select statement?
Thanks in advance,
Steven
Hi all
I have the following tables:
Code Snippet
CREATE TABLE #Lkp_Circle
(
ID INT ,
Abbreviation varchar(50)
)
GO
CREATE TABLE #Lkp_OtherCircles
(
Circle varchar(50)
)
GO
CREATE TABLE #Tbl_User
(
ID INT,
Name VARCHAR(50),
IsActive bit
)
GO
CREATE TABLE #Tbl_UserDetails
(
AssociateID INT,
CircleID INT
)
GO
INSERT INTO #Lkp_Circle VALUES (1,'C1')
INSERT INTO #Lkp_Circle VALUES (2,'C2')
INSERT INTO #Lkp_Circle VALUES (3,'C3')
INSERT INTO #Lkp_Circle VALUES (4,'C4')
INSERT INTO #Lkp_Circle VALUES (5,'C5')
INSERT INTO #Lkp_Circle VALUES (6,'C6')
INSERT INTO #Lkp_Circle VALUES (7,'C7')
GO
INSERT INTO #Lkp_OtherCircles VALUES ('C3')
INSERT INTO #Lkp_OtherCircles VALUES ('C4')
INSERT INTO #Lkp_OtherCircles VALUES ('C5')
INSERT INTO #Lkp_OtherCircles VALUES ('C6')
GO
INSERT INTO #Tbl_User VALUES ( 101,'U 1','True')
INSERT INTO #Tbl_User VALUES ( 102,'U 2','True')
INSERT INTO #Tbl_User VALUES ( 103,'U 3','True')
INSERT INTO #Tbl_User VALUES ( 104,'U 4','True')
INSERT INTO #Tbl_User VALUES ( 105,'U 5','True')
GO
INSERT INTO #Tbl_UserDetails VALUES(101,3)
INSERT INTO #Tbl_UserDetails VALUES(102,4)
INSERT INTO #Tbl_UserDetails VALUES(103,5)
INSERT INTO #Tbl_UserDetails VALUES(104,5)
INSERT INTO #Tbl_UserDetails VALUES(105,3)
GO
SELECT ISNULL(Circle,'Total') Circle, ISNULL(COUNT([HeadCount]),SUM(1)) AS [Total]
FROM
(
SELECT DISTINCT 'Circle' = CASE
WHEN #Lkp_Circle.Abbreviation IN (SELECT Circle FROM #Lkp_OtherCircles) THEN #Lkp_Circle.Abbreviation
WHEN #Lkp_Circle.Abbreviation NOT IN (SELECT Circle FROM #Lkp_OtherCircles) THEN 'Others'
ELSE 'Total' END,ISNULL(#Tbl_UserDetails.AssociateID,0) AS 'HeadCount'
FROM #Tbl_User INNER JOIN #Tbl_UserDetails ON #Tbl_User.ID = #Tbl_UserDetails.AssociateID INNER JOIN
#Lkp_Circle ON #Tbl_UserDetails.CircleID = #Lkp_Circle.ID
WHERE #Tbl_User.IsActive='True' AND #Tbl_User.ID>0 AND #Tbl_UserDetails.AssociateID>0
) AS PivotTable
GROUP BY Circle
WITH Cube
DROP TABLE #Tbl_User,#Tbl_UserDetails,#Lkp_Circle,#Lkp_OtherCircles
----EXPECTED RESULT
--Circle HeadCount
--C3 2
--C4 1
--C5 2
--C6 0
--Others 0
--Total 5
--
----ACTUAL RESULT
--Circle HeadCount
--C3 2
--C4 1
--C5 2
--Total 5
The criteria for Others is that those circles which are not part of #Lkp_OtherCircles i.e. C1,C2,C3 and C7 clubbed together. I have tried checking for the condition ISNULL when for that circle there is no user but the end result is same. Can someone tell me where I am going wrong and how to correct it?
Hey guys,
This is what I think and hope is a fairly straight forward SQL question
Essentially, I have a table which has the following columns that are relevent to my question:
PROJID
ACTIVITY_NAME
COMPLETION_DATE
Rows in this table are, for example:
PROJID ACTIVITY_NAME COMPLETION_DATE
1 Prepro 10/12/2007 3:42:30
2 Prepro 10/13/2007 9:16:27
2 QA 10/13/2007 10:00:01
2 Delivery 10/14/2007 09:31:12
etc.
So, really the key is the PROJID & the ACTIVITY_NAME (really, there's a unique column ID, but for this question, I'll leave it at that).
(Though this should be much easier to accomplish in code, the system is not built that way so) Is there a good way that I could return a status for a given PROJID based on whether a row exists for a given PROJID). In other words, ultimately, I would like to return something like this:
PROJID LAST_ACTIVITY
----------------------------------------------
1 Prepro
2 Delivery
where the activity order (in this case) is Prepro, QA, Delivery. So because a Delivery row exists for PROJID 2, then the LAST_ACTIVITY would return "Delivery" and because only Prepro exists for PROJID 1, the LAST_ACTIVITY returned would be Prepro
I really appreciate the help
Thanks,
Steve
I have a stored procedure with a SELECT statement, that retrieves 1 row.
SELECT name FROM tblNames WHERE nameID = "1"
I want all the NULL values in that row to be change in some default values.
How do I do this?
I have a gridview that is based on the selection(s) in a listbox. The gridview renders fine if I only select one value from the listbox. I recive this error though when I select more that one value from the listbox:
Syntax error converting the nvarchar value '4,1' to a column of data type int. If, however, I hard code 4,1 in place of @ListSelection (see below selectCommand WHERE and IN Clauses) the gridview renders perfectly.
<asp:SqlDataSource ID="SqlDataSourceAll" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT DISTINCT dbo.Contacts.Title, dbo.Contacts.FirstName, dbo.Contacts.MI, dbo.Contacts.LastName, dbo.Contacts.Suffix, dbo.Contacts.Dear, dbo.Contacts.Honorific, dbo.Contacts.Address, dbo.Contacts.Address2, dbo.Contacts.City, dbo.Contacts.StateOrProvince, dbo.Contacts.PostalCode FROM dbo.Contacts INNER JOIN dbo.tblListSelection ON dbo.Contacts.ContactID = dbo.tblListSelection.contactID INNER JOIN dbo.ListDescriptions ON dbo.tblListSelection.selListID = dbo.ListDescriptions.ID WHERE (dbo.tblListSelection.selListID IN (@ListSelection)) AND (dbo.Contacts.StateOrProvince LIKE '%') ORDER BY dbo.Contacts.LastName">
<SelectParameters>
<asp:Parameter Name="ListSelection" DefaultValue="1"/>
</SelectParameters>
</asp:SqlDataSource>
The selListID column is type integer in the database.
I'm using the ListBox1_selectedIndexChanged in the code behind like this where I've tried using setting my selectparameter using the label1.text value and the Requst.From(ListBox1.UniqueID) value with the same result:
Protected Sub ListBox1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles ListBox1.SelectedIndexChanged
Dim Item As ListItem
For Each Item In ListBox1.Items
If Item.Selected Then
If Label1.Text <> "" Then
Label1.Text = Label1.Text + Item.Value + ","
Else
Label1.Text = Item.Value + ","
End If
End If
Next
Label1.Text = Label1.Text.TrimEnd(",")
SqlDataSourceAll.SelectParameters("ListSelection").DefaultValue = Request.Form(ListBox1.UniqueID)
End Sub
What am I doing wrong here? Thanks!
If I try to run the code below, and even one of the values in the INNER
JOIN statements is NULL, the DataReader ends up with zero rows.
What I need is to see the results even if one or more of INNER JOIN
statements has a NULL value. For example, if I want info on
asset# 2104, and there's no value in the DriverID field, I need the
rest of the data to display and just have the lblDriverName by
blank. Is that possible?
<code>
Sub BindSearchGrid()
Dim searchUnitID As String
Dim searchQuery As String
searchUnitID = tbSearchUnitID.Text
lblIDNum.Text = searchUnitID
searchQuery = "SELECT * FROM Assets " & _
"INNER JOIN Condition ON Condition.ConditionID = Assets.ConditionID " & _
"INNER JOIN Drivers ON Drivers.DriverID = Assets.DriverID " & _
"INNER JOIN Departments ON Departments.DepartmentID = Assets.DepartmentID " & _
"INNER JOIN AssetCategories
ON AssetCategories.AssetCategoryID = Assets.AssetCategoryID " & _
"INNER JOIN Store ON
Store.[Store ID] = Assets.StoreID WHERE RTRIM(Assets.[Unit ID]) = '"
& searchUnitID & "'"
Dim myReader As SqlDataReader
myReader = Data.queryDB(searchQuery)
While myReader.Read
If
Not IsDBNull(myReader("Store Name")) Then lblStrID.Text =
myReader("Store Name")
If
Not IsDBNull(myReader("AssetCategory")) Then lblAsstCat.Text =
myReader("AssetCategory")
If
Not IsDBNull(myReader("Condition Description")) Then lblCondID.Text =
myReader("Condition Description")
If
Not IsDBNull(myReader("DepartmentName")) Then lblDepID.Text =
myReader("DepartmentName")
If
Not IsDBNull(myReader("Unit ID")) Then lblUnID.Text = myReader("Unit
ID")
If
Not IsDBNull(myReader("Year")) Then lblYr.Text = myReader("Year")
If
Not IsDBNull(myReader("Make")) Then lblMk.Text = myReader("Make")
If
Not IsDBNull(myReader("Model")) Then lblMod.Text = myReader("Model")
If
Not IsDBNull(myReader("Mileage")) Then lblMile.Text =
myReader("Mileage")
If
Not IsDBNull(myReader("Vin Number")) Then lblVinNum.Text =
myReader("Vin Number")
If
Not IsDBNull(myReader("License Number")) Then lblLicNum.Text =
myReader("License Number")
If
Not IsDBNull(myReader("Name")) Then lblDriverName.Text =
myReader("Name")
If
Not IsDBNull(myReader("DateAcquired")) Then lblDateAcq.Text =
myReader("DateAcquired")
If
Not IsDBNull(myReader("DateSold")) Then lblDtSld.Text =
myReader("DateSold")
If
Not IsDBNull(myReader("PurchasePrice")) Then lblPrPrice.Text =
myReader("PurchasePrice")
If
Not IsDBNull(myReader("NextSchedMaint")) Then lblNSM.Text =
myReader("NextSchedMaint")
If
Not IsDBNull(myReader("GVWR")) Then lblGrVWR.Text = myReader("GVWR")
If
Not IsDBNull(myReader("GVW")) Then lblGrVW.Text = myReader("GVW")
If
Not IsDBNull(myReader("Crane Capacity")) Then lblCrCap.Text =
myReader("Crane Capacity")
If
Not IsDBNull(myReader("Crane Certification")) Then lblCrCert.Text =
myReader("Crane Certification")
If
Not IsDBNull(myReader("Repair Cost")) Then lblRepCost.Text =
myReader("Repair Cost")
If
Not IsDBNull(myReader("Estimate Replacement")) Then lblEstRep.Text =
myReader("Estimate Replacement")
If
Not IsDBNull(myReader("SalvageValue")) Then lblSalVal.Text =
myReader("SalvageValue")
If
Not IsDBNull(myReader("CurrentValue")) Then lblCurVal.Text =
myReader("CurrentValue")
If
Not IsDBNull(myReader("Comments")) Then lblCom.Text =
myReader("Comments")
If
Not IsDBNull(myReader("Description")) Then lblDesc.Text =
myReader("Description")
End While
End Sub</code>
Hi,I have boolean values in a table for ex. Federation. And I want toselect followingSelect 'Insert into' + member + 'test' as test1from federationThen I get error messageServer: Msg 403, Level 16, State 1, Line 1Invalid operator for data type. Operator equals add, type equals bit.Someone can help me out of it.Thanks an advance- Loi -
View 3 Replies View Related