SQLDescribeParam With Subselect: Invalid Parameter Number/Invalid Descriptor Index
Apr 21, 2008
Hello,
I've got the following query:
SELECT zA."ID" AS fA_A
, zA."TEXT" AS fA_B
, (
SELECT COUNT(zC."ID")
FROM Test."Booking" AS zC
) AS fA_E
FROM Test."Stack" AS zA
WHERE zA."ID" = ?
With this query I call:
- SQLPrepare -> SQL_SUCCESS=0
- SQLNumParams -> SQL_SUCCESS=0, pcpar = 1
- SQLDescribeParam( 1 ) -> SQL_ERROR=-1, [Microsoft][ODBC SQL Server Driver]Invalid parameter number", "[Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index"
Is there a problem with this calling sequence or this query? Or is this a problem of SQL Server?
Regards
Markus
View 7 Replies
ADVERTISEMENT
May 23, 2007
We've run into a problem using SQLDescribeParam with the SQL Server ODBC driver (or SQL Native Client driver). The basic sequence that shows the issue is this:
SQLPrepare(select * from foo where col1 = ?)
SQLDescribeParam(1)
SQLBindParameter(1)
SQLFreeStmt(SQL_CLOSE) /* NOT RESET_PARAMS */
SQLPrepare(select * from foo where col1 = ? and col2 = ?)
SQLDescribeParam(1)
SQLDescribeParam(2) ==> returns "Invalid Descriptor Index"
If I leave out the SQLBindParameter, then the last SQLDescribeParam works just fine. Also, if I make the SQLFreeStmt use SQL_RESET_PARAMS then it works fine. However, I don't have direct control over the ODBC code being used, so I wanted to see if this known behavior. I've tried a couple of other ODBC drivers that support SQLDescribeParam and they work fine with the above sequence.
Thanks,
Chris
View 1 Replies
View Related
Oct 2, 2006
I'm testing db to db transactional replication on a box ( all on the same box ) and the distribution agent fails with the above error. I know it's something to do with the physical server as this test works on other servers fine. SQL2k Ent sp4 on w2k3 ent sp1. ( clustered )
Server and Agent accounts are in local admins, tried push and pull, named and anonymous. Replication also fails if I use the default snapshot location. I suspect policy restrictions ( maybe on the sql service accounts ) Any pointers would be helpful - there are no errors other than above, sadly.
View 12 Replies
View Related
Feb 27, 2002
We recently upgraded a SQL 7.0 SP2 database to SQL 2000 SP2. The web server that connects to both databases (we have 2 up that we can switch back and forth) is Win2K with the SQL Server ODBC driver of 2000.80.194.00 (I'm thinking this came w/ W2K) But I think I installed the 7.0 client connectivity on the web server.
I have a few questions:
1. Any reason why this would happen with the SQL upgrade?
2. What is the ideal situation for client/server ODBC drivers / MDAC client.. If I have a SQL 2000 SP2 server do I install SQL 2000 client on the web server and also the service pack on the web server?
Thanks and please ask if you need more info..
-Kelly
View 1 Replies
View Related
Mar 10, 2006
In previous versions of MSSQL and on every other SQL engine I've tried the following pseudo-code works.
SQLExecDirect('select employeeid, photo, notes from employees where employeeid = 1')
SQLFetch()
SQLGetData(for column 3)
SQLGetData(for column 2)
With the Native Client I get an error 07009 "[Microsoft][SQL Native Client]Invalid Descriptor Index"
Is this a bug in the Native Client or am I making an incorrect assumption that I can get data in any order?
View 3 Replies
View Related
Dec 28, 2005
Hi all,
I'm getting this "invalid descriptor index" exception while trying to fetch a record from the table.
The query is "select * from <tablename> where <columnname> = 'xyz'". The column name is correct and indeed a record with 'xyz' value exists. The record is getting fetched too...! But I'm having this particular error while trying to retrieve a couple of fields with rs.getString().
The order of columns in the table is same as the order in which I'm retrieving them. And I'm not facing any problem retrieving another field which has width of 200 characters.
I'll be very grateful indeed if someone can help me out of this particular problem...
Cheers, mates!
View 1 Replies
View Related
May 19, 2005
Hi,
I run a nightly dbcc checktable on order_header and today I see this error occurs.
Table error: Table 'ORDER_HEADER' (ID 203147769). Missing or invalid key in index 'PK_ORDER_HEADER' (ID 4) for the row:
Server: Msg 8955, Level 16, State 1, Line 1
1. I have no idea what caused it?
2. How do I fixed this online as the application is 24/7?
3. I did try to dbcc reindex but it failed reporting that can't create index because of duplicate in primary index key????
Please show me a way to fix this.
Thanks
Dave
View 2 Replies
View Related
Mar 12, 2007
Dear all,
We have such problems:
DBCC results for 'TRAMES'.
Server: Msg 8955, Level 16, State 1, Line 1
Data row (1:3893993:34) identified by (RID = (1:3893993:34) ) has index values (PO_ID = 80123).
Server: Msg 8951, Level 16, State 1, Line 1
Table error: Table 'TRAMES' (ID 1573580644). Missing or invalid key in index 'IX_POID' (ID 2) for the row:
Server: Msg 8955, Level 16, State 1, Line 1
Data row (1:3893993:48) identified by (RID = (1:3893993:48) ) has index values (PO_ID = 80095).
Server: Msg 8951, Level 16, State 1, Line 1
Table error: Table 'TRAMES' (ID 1573580644). Missing or invalid key in index 'IX_POID' (ID 2) for the row:
Server: Msg 8955, Level 16, State 1, Line 1
Data row (1:3893993:79) identified by (RID = (1:3893993:79) ) has index values (PO_ID = 80123).
Server: Msg 8951, Level 16, State 1, Line 1
Table error: Table 'TRAMES' (ID 1573580644). Missing or invalid key in index 'IX_POID' (ID 2) for the row:
Server: Msg 8955, Level 16, State 1, Line 1
Data row (1:3893993:92) identified by (RID = (1:3893993:92) ) has index values (PO_ID = 80095).
There are 1703901 rows in 18180 pages for object 'TRAMES'.
CHECKDB found 0 allocation errors and 4 consistency errors in table 'TRAMES' (object ID 1573580644).
And really I don't know what can I do to prevent such problems. I know how to fix it with a dbreindex, but it blocks the production during several minutes, and we have to restart the whole plant...
we are using SQL 2000 standard edition 8.00.2039 (with SP4)
Thank you,
regards
Olivier
View 2 Replies
View Related
Jun 16, 2003
When I try to import a Pervasive table into SQL Server 2K, I get the error msg of 'Invalid column number'.
Is that because SQL Server cant handle more than 1024 columns ?
I think my Pervasive table has more than 2000 columns
Thanks in advance
View 5 Replies
View Related
Nov 13, 2007
Hello, I am very, very new to the world of SSIS and from a totally different platform (iSeries), learning, digging and finding golden nuggets as I go. If this is not the forum to which I should be addressing my dilemma, please let me know as to whom or where I should direct it to. I have presented this question at two other forums, and I find it difficult to believe that no one is able to help me.
My two questions are as follows:
Question One:
I am presently encountering the following exception.
SSIS package "DW.CUST_CNCL_ORD.dtsx" starting.
Error: 0xC00291E2 at BP Parter Exec SQL, Execute SQL Task: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_Rowset".
Task failed: BP Parter Exec SQL
Warning: 0x80019002 at DW CUST_CNCL_ORD: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "DW.CUST_CNCL_ORD.dtsx" finished: Failure.
Try as I do to find information regarding this exception, I am not able to. Can anyone share their wisdom on this topic?
Question two:
Is there a book that you may recommend that will contribute to my learning this new platform and evironment? I presently have the SQL Server 2005 integration services book.
Sample code follows:
SELECT BUS_YY_ID AS RBUS_YY_ID, BUS_PRD_ID AS RBUS_PRD_ID, BUS_PRD_STRT_DT AS RBUS_PRD_STRT_DT,
BUS_PRD_END_DT AS RBUS_PRD_END_DT
FROM BP.BUS_PRD_DT
WHERE (BUS_YY_ID = ?)
The first parameter is defined as parameter 0 - Direction is Input
Subsequent parameters are defined as follows:
Variable Name Direction Parameter Name Current_Year Input 0
RBUS_YY_ID Output 1
RBUS_PRD_ID Output 2
RBUS_PRD_STRT_DT Output 3
RBUS_PRD_END_DT Output 4
Result is defined as follows:
Result Name Variable Name
1 RBUS_YY_ID
2 RBUS_PRD_ID
3 RBUS_PRD_STRT_DT
4 RBUS_PRD_END_DT
Thank you in advance for any information you may provide.
Crodrig
View 26 Replies
View Related
Jun 13, 2003
I have a ##temp table which collects command (varchar(120)) info from sysjobsteps table as follows:
command
------------------------------
BACKUP DATABASE FDMS_11111_2 To Backup_11111_2_4Thu with init, name = 'Backup of Job_11111_2_4Thu'
Now, I need to extract the database name from the command string: It did return the correct database name but ended with error message.
select substring(command, 17, charindex(' To Backup_',Command)-17) from ##tempServerNameDatabaseNameJobHistory
Command
-------
FDMS_11111_2
FDMS_9999_2
(2 row(s) affected)
Server: Msg 536, Level 16, State 3, Line 1 Invalid length parameter passed to the substring function.
-D
View 2 Replies
View Related
Apr 30, 2001
I am running SQL 7 Svc Pack 2 on TN 4.0 Svc Pack 6a.
I am getting the following error when opening up a DTS package on my SQL Server from EM on my workstation. If I open it up on the server by using pcanywhere the package opens fine. Ther error is a dialogue box stating:
Package Error
Error Source:Microsoft Data Transformation Services (DTS) Package
Error Description: The Parameter is incorrect.
Has anyone seen this. I get nothing in the event log or SQL logs. I can't seem to figure this one out.
View 3 Replies
View Related
Apr 6, 2006
I am real new to SQL Server. We are using SQL Server 2000.
My objective is to get a list of all store procedures for specific database. To accomplish this, I programmatically create a connection to the 'master' database where the sp resides, create a callablestatment for 'sp_stored_procedures' ({call sp_stored_procedures(?,?,?)}). I am passing in null, null, and the database name. When I execute the query, I get the below error:
Code:
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Invalid parameter binding(s).
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
When I made the connection to the master database, I used one of the existing users from the master database.
I looked at the store procedure and verified the sp has 3 input parameter. The first two can be null.
I am not sure why I can not run this sp. I am wondering if we have the database setup properly. Any help or suggestions would be well worth it at this point.
Thanks in advance for reading my post.
Russ
View 2 Replies
View Related
Jan 5, 2007
First of all... thanks for a great and interesting product... this is really nice...
I'm working with a winform app and pushing it out via click-once deployment (using the bootstrapper for SQLCompact as well)... the SQL install is fine, however when my app attempts to do anything with the db, i get an error "invalid reconciler parameter" error... some searching seems to indicate that this could be coming from the path being longer than 128chars... howeve, using click once, i'm not certain I can control the deployment location... I'm certain that there is a work around, but not sure what it is... any guidance?
As a note, running the app on the same machine using the output from VS (not installed via ClickOnce but simply running hte exe) works fine...
Thanks,
Rob
View 4 Replies
View Related
Jun 24, 1999
We tried to restore an empty database from a backup and got:
'Load database encountered an invalid logical page number' error.
This then set the database as 'loading'
Anyone got any ideas?
We aren't exactly sure how big the first database was when the backup was done but if the new database isn't big enough to contain the backed up data, wouldn't we get a more meaningful error?
Janet
View 2 Replies
View Related
Nov 11, 2014
While trying to execute the below query I get an error "Invalid Paramter Binding.
SELECT RELEASE_CYCLES.RCYC_NAME+' : '+ CYCL_FOLD.CF_ITEM_NAME /*Test Set Folder (CYCLE).Name*/ as "Cycle Name : Test Component",
SUM(case when t3.status='Passed' then 1 else 0 end) "Passed",
SUM(case when t3.status='Failed' then 1 else 0 end) "Failed",
SUM(case when t3.status='Not Completed' then 1 else 0 end) "Not Completed",
SUM(case when t3.status='No Run' then 1 else 0 end) "No Run",
SUM(case when t3.status in ('Passed','Failed','Not Completed','No Run') then 1 else 0 end) "Total",
[code]....
View 5 Replies
View Related
Jun 4, 2007
I have the follwoing stored procedure:ALTER procedure [dbo].[up_GetExecutionContext](@ExecutionGUID int = null) asbeginset nocount ondeclare@s varchar(500)declare @i intset @s = ''select @s = @s + EventType + ','-- Dynamically build the list ofeventsfrom(select distinct top 100 percent [event] as EventTypefrom dbo.PackageStepwhere (@ExecutionGUID is null or PackageStep.packagerunid =@ExecutionGUID)order by 1) as xset @i = len(@s)select case @iwhen 500 then left(@s, @i - 3) + '...'-- If string is too long thenterminate with '...'else left(@s, @i - 1) -- else just remove the final commaend as 'Context'set nocount offend --procedureGOWhen I run this and pass in a value of NULL, things work fine. When Ipass in an actual value (i.e. 15198), I get the following message:Invalid length parameter passed to the SUBSTRING function.There is no SUBSTRING being used anywhere in the query and thedatatypes look okay to me.Any suggestions would be greatly appreciated.Thanks!!
View 2 Replies
View Related
Jan 7, 2001
FYI. Perhaps I missed it on the Fix List, but applying SP3 to my Win2K Professional workstation w/ SQL Server 7 Desktop Edition remedied a chronic error I'd been receiving when trying to open a pre-existing DTS package which resided on other servers. For weeks, no matter what I've tried, I've been getting a message box saying "Invalid Paramter". (I didn't go as far as an uninstall / re-install, but I did about everything short of that.) After applying SP3, the DTS packages open up easily.
View 1 Replies
View Related
Dec 8, 1998
What I'm trying to do is straight out of the SQL Server Help as below:
Create Procedure SP_WebNotifySupport (@c8_callid varchar(8), @vc50_yourname varchar(50))
As
Set NoCount ON
DECLARE @vc30_CmpnyNme varchar(30), @vc50_subject varchar(50)
Select @vc30_CmpnyNme = CmpnyNme from Profile where name = @vc50_yourname
CREATE TABLE #texttab (c1 text)
INSERT #texttab Select CallDesc from CallLog where CallID = @c8_callid
Select @vc50_subject = @vc30_CmpnyNme + ' Issue ' + @c8_callid
DECLARE @@cmd varchar(56)
SELECT @@cmd = 'SELECT c1 FROM #texttab'
EXEC master.dbo.xp_sendmail 'jcraddock', @@query = @@cmd, @@no_header= 'TRUE', @@subject = @vc50_subject
DROP TABLE #texttab
Set NoCount OFF
Go
View 1 Replies
View Related
Aug 13, 2007
Hi there when i tried to execute the following query in sql server
select au_fname,
SUBSTRING(P1.au_lname, CHARINDEX('/', P1.au_lname) + 1,
CHARINDEX('=', P1.au_lname, 1)-3)AS [Full Name]
from authors as P1
i will get the error like
"Invalid length parameter passed to the substring function."
If i remove -3 from there it works fine...
Please can anyone clarify this issue.
Thank You.
pavan
View 3 Replies
View Related
Aug 23, 2007
Hi,
I've set up a data-driven subscription on a report but it's not sending and the error log says it's because:
Default value or value provided for the report parameter 'CSRFaxID' is not a valid value.
For the particular dataset record causing the error I'm passing the value Null to the report parameter. The report parameter CSRFaxID is set up with "Allow Null" and with a default value of Null. I can run the report in my browser with CSRFaxID set to null, but the scheduled subscription is not able to produce the report with the same parameter value. Does anyone have any idea what the problem is and how I can fix it?
Regards,
Greg McNamara
View 3 Replies
View Related
Sep 20, 2007
I am trying to set up an Execute SQL Task that will feed into a foreach loop for processing of data. I am using an ADO.NET Connection with Direct input with full result set. I have tried using "select * from <table>" and also "select <column1>, <column2> from <table>". I have user variables set in the package and have the table cfolumn names listed in result name and the appropriate package variable in variable name on the Result Set tab. There is a total of 53 columns per row and the number of rows that should be returned can be anywhere from none to several hundred. Upon trying to run the package, I am receiving
Error: 0xC00291E2 at Execute SQL Task, Execute SQL Task: There is an invalid number of result bindings
returned for the ResultSetType: "ResultSetType_Rowset".
Anyone have any ideas here? Thanks in advance!
View 2 Replies
View Related
Aug 12, 2015
SSIS script task fail with error message-SSIS script task fail error message Error: Cannot load Counter Name data because an invalid index '' was read from the registry.
View 2 Replies
View Related
Mar 3, 2014
I have a sql job which will execute the below stored proc.
Basically it Refresh the data by truncating the tables and using BCP to import the data. Job was running fine but today got a error message.
Invalid length parameter passed to the substring function. [SQLSTATE 42000] (Error 536). The step failed.
USE [database]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE Procedure [dbo].[Refresh_tables]
[Code] ......
View 2 Replies
View Related
Feb 1, 2008
Hi,
I was trying to execute the following query.
select substring(ISNULL(CAST(FullAdress AS NVARCHAR(MAX)),''),1,charindex(',',ISNULL(CAST(FullAdress AS NVARCHAR(MAX)),''))-1) from tbl_lrf_company_details_with_codes
but i am getting the error as "Invalid length parameter passed to the SUBSTRING function."
Please advice
Thanks In advance
View 4 Replies
View Related
May 27, 2008
SELECT
C.Description,
SUBSTRING (
(CONVERT (VARCHAR (255), D.CurrentXmlValue)), --expression
(CHARINDEX ('>', CONVERT (VARCHAR (255), D.CurrentXmlValue)) + 1), --start
( (LEN (CONVERT (VARCHAR (255), D.CurrentXmlValue))) -
(CHARINDEX ('>', CONVERT (VARCHAR (255), D.CurrentXmlValue))*2) - 1
)--length
) AS Version
FROM
:
:
WHERE
:
:
This does not work while
:
:
--SUBSTRING (
(CONVERT (VARCHAR (255), D.CurrentXmlValue)) as expression, --expression
(CHARINDEX ('>', CONVERT (VARCHAR (255), D.CurrentXmlValue)) + 1) as start, --start
( (LEN (CONVERT (VARCHAR (255), D.CurrentXmlValue))) -
(CHARINDEX ('>', CONVERT (VARCHAR (255), D.CurrentXmlValue))*2) - 1
) as length --length
--) AS Version
:
:
works!!
I get
Msg 536, Level 16, State 5, Line 2
Invalid length parameter passed to the SUBSTRING function.
Error.
Any idea why i am getting this??
I am trying to get rid of xml tags in the column.
Thanks,
View 4 Replies
View Related
Jun 9, 2006
Hi there,
This seems a bug to me. Or does anyone has a logical explanation that escapes me?
When in SSIS Designer Version 9.00.1399.00 I add output columns (numeric 4,0 ) to a scriptcomponent and fill them with valid numeric data in thescript I get a database error 'invalid number' when I use these columns in an OLE db Command-transformation . This errormessage disappears when I replaces those columns by a dataconversion to the datatype they originally have.
Derived Column Name Derived Column Expression
STATUS_DEF Replace 'STATUS_DEF' (DT_NUMERIC,4,0)STATUS_DEF
Maybethis info is usefull for somebody else who can't figure out wathever he's doing wrong.
Paul Baudouin
View 1 Replies
View Related
Jun 5, 2015
I try to import data with bulk insert. Here is my table:
CREATE TABLE [data].[example](
 col1 [varchar](10) NOT NULL,
 col2 [datetime] NOT NULL,
 col3 [date] NOT NULL,
 col4 [varchar](6) NOT NULL,
 col5 [varchar](3) NOT NULL,
[Code] ....
My format file:
10.0
7
1Â SQLCHAR 0 Â 10Â "@|@"Â 2Â Col2Â ""
1Â SQLCHAR 0 Â 10Â "@|@"Â 3Â Col3Â ""
2Â SQLCHAR 0 Â 6Â "@|@"Â 4Â Col4Â Latin1_General_CI_AS
[Code] .....
The first column should store double (in col2 and col3) in my table
My file:
Col1,Col2,Col3,Col4,Col5,Col6,Col7
2015-04-30@|@MDDS@|@ADP@|@EUR@|@185.630624@|@2015-04-30@|@MDDS
2015-04-30@|@MDDS@|@AED@|@EUR@|@4.107276@|@2015-04-30@|@MDDS
My command:
bulk insert data.example
from 'R:epoolexample.csv'
WITH(FORMATFILE = 'R:cfgexample.fmt' , FIRSTROW = 2)
Get error:
Msg 4823, Level 16, State 1, Line 2
Cannot bulk load. Invalid column number in the format file "R:cfgexample.fmt".
I changed some things as:
used ";" and "," as column delimiter
changed file type from UNIX to DOS and adjusted the format file with "
" for row delimiter
Removed this line from format file
1Â SQLCHAR 0 Â 10Â "@|@"Â 2Â Col2Â ""
Nothing works ....
View 7 Replies
View Related
Dec 1, 2015
is it possible to identify which value is causing me the above error message and how to resolve it,These are for British postcodes.
create table #tmp (postcode varchar(200) NULL)
insert into #tmp values ('NULL')
insert into #tmp values ('-')
insert into #tmp values ('.')
insert into #tmp values ('0L6 7TP')
insert into #tmp values ('AB10 1WP')
insert into #tmp values ('AB51 5HH')
[code]...
This is the main query
select postcode,LEFT([Postcode], CHARINDEX(' ',[Postcode]) - 1)
from #tmp
order by Postcode
drop table #tmp
View 4 Replies
View Related
Sep 28, 2007
Hi,
I am using a simple procedure to pivot results (found in another forum and adapted it). It is done on SQL Server 2005 server with all service packs. Procedure:
**************
ALTER Procedure [dbo].[EthnicityPivot] @StDate as Datetime, @EndDate as Datetime
as
begin
DECLARE @Teams varchar(2000)
truncate table ForEthnicPivot
INSERT INTO ForEthnicPivot
SELECT DISTINCT COUNT(ID), Team, Ethnicity
FROM dbo._EthnicityByTeamEpisode
where Startdate between @StDate and @EndDate
GROUP BY Ethnicity, Team
SET @Teams = ''
--// Get a list of the pivot columns that are important to you.
SELECT @Teams = @Teams + '[' + Team + '],'
FROM (SELECT Distinct Team FROM ForEthnicPivot) Team
--// Remove the trailing comma
SET @Teams = LEFT(@Teams, LEN(@Teams)-1)
--// Now execute the Select with the PIVOT and dynamically add the list
--// of dates for the columns
EXEC( 'SELECT * FROM ForEthnicPivot PIVOT (SUM(countID) FOR Team IN (' + @Teams + ')) AS X' )
end
************
I can call the function:
exec EthnicityPivot '01/01/2007','09/09/2007'
and it works fine in SQL analyzer, but when I want to use it in Visual Studio in a new report I am getting this error
message:
There is an error in the query. Invalid length parameter passed to the SUBSTRING function. Incorrect syntax near ')'.
Anyone had similar error and sorted it?
Cheers
Polda
View 4 Replies
View Related
Oct 9, 2006
Hi,
I am new at sql 2000 and 2005, I have created a package in 2005 which I am trying to execute on a daily bases by creating a job. At first because of security issues the job would not execute. Hence, I had to create a credential and a proxy to run the job with sa account. Now it is giving me this error,
€œSQLServer Error: 536, Invalid length parameter passed to the SUBSTRING function. €œ
Through research I have no clue as what I need to do, or where to look.
The package runs without error when I execute the package itself.
Any help is greatly appreciated.
Thanks,
Lori
View 1 Replies
View Related
Nov 28, 2005
Hi
i got errro mess "Invalid length parameter passed to the substring function" from this below. Anyone how can give me a hint what cause this, and how i can solve it? if i remove whats whitin thoose [] it works, i dont use [] in the code :)
colums:
VLF_InfectionDestination is nvarchar 254
SELECT TOP 10 tb_AVVirusLog.VLF_VirusName, COUNT(tb_AVVirusLog.VLF_VirusName) AS number
FROM tb_AVVirusLog INNER JOIN
__CustomerMachines002 ON tb_AVVirusLog.CLF_ComputerName = __CustomerMachines002.FalseName
WHERE (CONVERT(varchar, tb_AVVirusLog.CLF_LogGenerationTime, 120) BETWEEN @fyear + @fmonth + @fday AND @tyear + @tmonth + @tday) AND
(__CustomerMachines002.folder_id = @folderId) [OR
(CONVERT(varchar, tb_AVVirusLog.CLF_LogGenerationTime, 120) BETWEEN @fyear + @fmonth + @fday AND @tyear + @tmonth + @tday) AND
(tb_AVVirusLog.VLF_InfectionDestination LIKE N'%@%')]
GROUP BY tb_AVVirusLog.VLF_VirusName
HAVING (NOT (tb_AVVirusLog.VLF_VirusName LIKE N'cookie'))
ORDER BY COUNT(tb_AVVirusLog.VLF_VirusName) DESC
View 7 Replies
View Related
Jul 22, 2015
when I am trying to perform below query,
Â
 INSERT INTO EMPLOYEE
  SELECT TOP 100 *
 FROM EMPLOYEE_LANDING;
I am getting Invalid length parameter passed to the LEFT or SUBSTRING function.
View 3 Replies
View Related
